| /* |
| * Wireless Host Controller (WHC) driver. |
| * |
| * Copyright (C) 2007 Cambridge Silicon Radio Ltd. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/uwb/umc.h> |
| |
| #include "../../wusbcore/wusbhc.h" |
| |
| #include "whcd.h" |
| |
| /* |
| * One time initialization. |
| * |
| * Nothing to do here. |
| */ |
| static int whc_reset(struct usb_hcd *usb_hcd) |
| { |
| return 0; |
| } |
| |
| /* |
| * Start the wireless host controller. |
| * |
| * Start device notification. |
| * |
| * Put hc into run state, set DNTS parameters. |
| */ |
| static int whc_start(struct usb_hcd *usb_hcd) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct whc *whc = wusbhc_to_whc(wusbhc); |
| u8 bcid; |
| int ret; |
| |
| mutex_lock(&wusbhc->mutex); |
| |
| le_writel(WUSBINTR_GEN_CMD_DONE |
| | WUSBINTR_HOST_ERR |
| | WUSBINTR_ASYNC_SCHED_SYNCED |
| | WUSBINTR_DNTS_INT |
| | WUSBINTR_ERR_INT |
| | WUSBINTR_INT, |
| whc->base + WUSBINTR); |
| |
| /* set cluster ID */ |
| bcid = wusb_cluster_id_get(); |
| ret = whc_set_cluster_id(whc, bcid); |
| if (ret < 0) |
| goto out; |
| wusbhc->cluster_id = bcid; |
| |
| /* start HC */ |
| whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); |
| |
| usb_hcd->uses_new_polling = 1; |
| usb_hcd->poll_rh = 1; |
| usb_hcd->state = HC_STATE_RUNNING; |
| |
| out: |
| mutex_unlock(&wusbhc->mutex); |
| return ret; |
| } |
| |
| |
| /* |
| * Stop the wireless host controller. |
| * |
| * Stop device notification. |
| * |
| * Wait for pending transfer to stop? Put hc into stop state? |
| */ |
| static void whc_stop(struct usb_hcd *usb_hcd) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct whc *whc = wusbhc_to_whc(wusbhc); |
| |
| mutex_lock(&wusbhc->mutex); |
| |
| /* stop HC */ |
| le_writel(0, whc->base + WUSBINTR); |
| whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); |
| whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, |
| WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, |
| 100, "HC to halt"); |
| |
| wusb_cluster_id_put(wusbhc->cluster_id); |
| |
| mutex_unlock(&wusbhc->mutex); |
| } |
| |
| static int whc_get_frame_number(struct usb_hcd *usb_hcd) |
| { |
| /* Frame numbers are not applicable to WUSB. */ |
| return -ENOSYS; |
| } |
| |
| |
| /* |
| * Queue an URB to the ASL or PZL |
| */ |
| static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, |
| gfp_t mem_flags) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct whc *whc = wusbhc_to_whc(wusbhc); |
| int ret; |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_INTERRUPT: |
| ret = pzl_urb_enqueue(whc, urb, mem_flags); |
| break; |
| case PIPE_ISOCHRONOUS: |
| dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); |
| ret = -ENOTSUPP; |
| break; |
| case PIPE_CONTROL: |
| case PIPE_BULK: |
| default: |
| ret = asl_urb_enqueue(whc, urb, mem_flags); |
| break; |
| }; |
| |
| return ret; |
| } |
| |
| /* |
| * Remove a queued URB from the ASL or PZL. |
| */ |
| static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct whc *whc = wusbhc_to_whc(wusbhc); |
| int ret; |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_INTERRUPT: |
| ret = pzl_urb_dequeue(whc, urb, status); |
| break; |
| case PIPE_ISOCHRONOUS: |
| ret = -ENOTSUPP; |
| break; |
| case PIPE_CONTROL: |
| case PIPE_BULK: |
| default: |
| ret = asl_urb_dequeue(whc, urb, status); |
| break; |
| }; |
| |
| return ret; |
| } |
| |
| /* |
| * Wait for all URBs to the endpoint to be completed, then delete the |
| * qset. |
| */ |
| static void whc_endpoint_disable(struct usb_hcd *usb_hcd, |
| struct usb_host_endpoint *ep) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct whc *whc = wusbhc_to_whc(wusbhc); |
| struct whc_qset *qset; |
| |
| qset = ep->hcpriv; |
| if (qset) { |
| ep->hcpriv = NULL; |
| if (usb_endpoint_xfer_bulk(&ep->desc) |
| || usb_endpoint_xfer_control(&ep->desc)) |
| asl_qset_delete(whc, qset); |
| else |
| pzl_qset_delete(whc, qset); |
| } |
| } |
| |
| static void whc_endpoint_reset(struct usb_hcd *usb_hcd, |
| struct usb_host_endpoint *ep) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct whc *whc = wusbhc_to_whc(wusbhc); |
| struct whc_qset *qset; |
| |
| qset = ep->hcpriv; |
| if (qset) { |
| qset->remove = 1; |
| |
| if (usb_endpoint_xfer_bulk(&ep->desc) |
| || usb_endpoint_xfer_control(&ep->desc)) |
| queue_work(whc->workqueue, &whc->async_work); |
| else |
| queue_work(whc->workqueue, &whc->periodic_work); |
| |
| qset_reset(whc, qset); |
| } |
| } |
| |
| |
| static struct hc_driver whc_hc_driver = { |
| .description = "whci-hcd", |
| .product_desc = "Wireless host controller", |
| .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), |
| .irq = whc_int_handler, |
| .flags = HCD_USB2, |
| |
| .reset = whc_reset, |
| .start = whc_start, |
| .stop = whc_stop, |
| .get_frame_number = whc_get_frame_number, |
| .urb_enqueue = whc_urb_enqueue, |
| .urb_dequeue = whc_urb_dequeue, |
| .endpoint_disable = whc_endpoint_disable, |
| .endpoint_reset = whc_endpoint_reset, |
| |
| .hub_status_data = wusbhc_rh_status_data, |
| .hub_control = wusbhc_rh_control, |
| .bus_suspend = wusbhc_rh_suspend, |
| .bus_resume = wusbhc_rh_resume, |
| .start_port_reset = wusbhc_rh_start_port_reset, |
| }; |
| |
| static int whc_probe(struct umc_dev *umc) |
| { |
| int ret = -ENOMEM; |
| struct usb_hcd *usb_hcd; |
| struct wusbhc *wusbhc = NULL; |
| struct whc *whc = NULL; |
| struct device *dev = &umc->dev; |
| |
| usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); |
| if (usb_hcd == NULL) { |
| dev_err(dev, "unable to create hcd\n"); |
| goto error; |
| } |
| |
| usb_hcd->wireless = 1; |
| |
| wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| whc = wusbhc_to_whc(wusbhc); |
| whc->umc = umc; |
| |
| ret = whc_init(whc); |
| if (ret) |
| goto error; |
| |
| wusbhc->dev = dev; |
| wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); |
| if (!wusbhc->uwb_rc) { |
| ret = -ENODEV; |
| dev_err(dev, "cannot get radio controller\n"); |
| goto error; |
| } |
| |
| if (whc->n_devices > USB_MAXCHILDREN) { |
| dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", |
| whc->n_devices); |
| wusbhc->ports_max = USB_MAXCHILDREN; |
| } else |
| wusbhc->ports_max = whc->n_devices; |
| wusbhc->mmcies_max = whc->n_mmc_ies; |
| wusbhc->start = whc_wusbhc_start; |
| wusbhc->stop = whc_wusbhc_stop; |
| wusbhc->mmcie_add = whc_mmcie_add; |
| wusbhc->mmcie_rm = whc_mmcie_rm; |
| wusbhc->dev_info_set = whc_dev_info_set; |
| wusbhc->bwa_set = whc_bwa_set; |
| wusbhc->set_num_dnts = whc_set_num_dnts; |
| wusbhc->set_ptk = whc_set_ptk; |
| wusbhc->set_gtk = whc_set_gtk; |
| |
| ret = wusbhc_create(wusbhc); |
| if (ret) |
| goto error_wusbhc_create; |
| |
| ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); |
| if (ret) { |
| dev_err(dev, "cannot add HCD: %d\n", ret); |
| goto error_usb_add_hcd; |
| } |
| |
| ret = wusbhc_b_create(wusbhc); |
| if (ret) { |
| dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); |
| goto error_wusbhc_b_create; |
| } |
| |
| whc_dbg_init(whc); |
| |
| return 0; |
| |
| error_wusbhc_b_create: |
| usb_remove_hcd(usb_hcd); |
| error_usb_add_hcd: |
| wusbhc_destroy(wusbhc); |
| error_wusbhc_create: |
| uwb_rc_put(wusbhc->uwb_rc); |
| error: |
| whc_clean_up(whc); |
| if (usb_hcd) |
| usb_put_hcd(usb_hcd); |
| return ret; |
| } |
| |
| |
| static void whc_remove(struct umc_dev *umc) |
| { |
| struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct whc *whc = wusbhc_to_whc(wusbhc); |
| |
| if (usb_hcd) { |
| whc_dbg_clean_up(whc); |
| wusbhc_b_destroy(wusbhc); |
| usb_remove_hcd(usb_hcd); |
| wusbhc_destroy(wusbhc); |
| uwb_rc_put(wusbhc->uwb_rc); |
| whc_clean_up(whc); |
| usb_put_hcd(usb_hcd); |
| } |
| } |
| |
| static struct umc_driver whci_hc_driver = { |
| .name = "whci-hcd", |
| .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, |
| .probe = whc_probe, |
| .remove = whc_remove, |
| }; |
| |
| static int __init whci_hc_driver_init(void) |
| { |
| return umc_driver_register(&whci_hc_driver); |
| } |
| module_init(whci_hc_driver_init); |
| |
| static void __exit whci_hc_driver_exit(void) |
| { |
| umc_driver_unregister(&whci_hc_driver); |
| } |
| module_exit(whci_hc_driver_exit); |
| |
| /* PCI device ID's that we handle (so it gets loaded) */ |
| static struct pci_device_id whci_hcd_id_table[] = { |
| { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, |
| { /* empty last entry */ } |
| }; |
| MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); |
| |
| MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); |
| MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); |
| MODULE_LICENSE("GPL"); |