s2io, rename BIT macro
s2io, rename BIT macro
BIT macro will be global definiton of (1<<x)
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Ramkrishna Vepa <ram.vepa@neterion.com>
Cc: Rastapur Santosh <santosh.rastapur@neterion.com>
Cc: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Cc: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 22e4054..b8c0e7b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1716,7 +1716,7 @@
MISC_LINK_STABILITY_PRD(3);
writeq(val64, &bar0->misc_control);
val64 = readq(&bar0->pic_control2);
- val64 &= ~(BIT(13)|BIT(14)|BIT(15));
+ val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
writeq(val64, &bar0->pic_control2);
}
if (strstr(nic->product_name, "CX4")) {
@@ -2427,7 +2427,7 @@
}
if ((rxdp->Control_1 & RXD_OWN_XENA) &&
((nic->rxd_mode == RXD_MODE_3B) &&
- (rxdp->Control_2 & BIT(0)))) {
+ (rxdp->Control_2 & s2BIT(0)))) {
mac_control->rings[ring_no].rx_curr_put_info.
offset = off;
goto end;
@@ -2540,7 +2540,7 @@
rxdp->Control_2 |= SET_BUFFER2_SIZE_3
(dev->mtu + 4);
}
- rxdp->Control_2 |= BIT(0);
+ rxdp->Control_2 |= s2BIT(0);
}
rxdp->Host_Control = (unsigned long) (skb);
if (alloc_tab & ((1 << rxsync_frequency) - 1))
@@ -3377,7 +3377,7 @@
pci_write_config_dword(sp->pdev, 0x68, 0x7C);
/* Clearing PCI_STATUS error reflected here */
- writeq(BIT(62), &bar0->txpic_int_reg);
+ writeq(s2BIT(62), &bar0->txpic_int_reg);
}
/* Reset device statistics maintained by OS */
@@ -3575,7 +3575,7 @@
do {
val64 = readq(&bar0->xmsi_access);
- if (!(val64 & BIT(15)))
+ if (!(val64 & s2BIT(15)))
break;
mdelay(1);
cnt++;
@@ -3597,7 +3597,7 @@
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
writeq(nic->msix_info[i].data, &bar0->xmsi_data);
- val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6));
+ val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, i)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
@@ -3614,7 +3614,7 @@
/* Store and display */
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
- val64 = (BIT(15) | vBIT(i, 26, 6));
+ val64 = (s2BIT(15) | vBIT(i, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, i)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
@@ -4634,7 +4634,7 @@
do {
udelay(100);
val64 = readq(&bar0->stat_cfg);
- if (!(val64 & BIT(0)))
+ if (!(val64 & s2BIT(0)))
break;
cnt++;
if (cnt == 5)