| /* |
| * Suspend/resume support. Currently supporting Armada XP only. |
| * |
| * Copyright (C) 2014 Marvell |
| * |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/cpu_pm.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mbus.h> |
| #include <linux/of_address.h> |
| #include <linux/suspend.h> |
| #include <asm/cacheflush.h> |
| #include <asm/outercache.h> |
| #include <asm/suspend.h> |
| |
| #include "coherency.h" |
| #include "common.h" |
| #include "pmsu.h" |
| |
| #define SDRAM_CONFIG_OFFS 0x0 |
| #define SDRAM_CONFIG_SR_MODE_BIT BIT(24) |
| #define SDRAM_OPERATION_OFFS 0x18 |
| #define SDRAM_OPERATION_SELF_REFRESH 0x7 |
| #define SDRAM_DLB_EVICTION_OFFS 0x30c |
| #define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff |
| |
| static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd); |
| static void __iomem *sdram_ctrl; |
| |
| static int mvebu_pm_powerdown(unsigned long data) |
| { |
| u32 reg, srcmd; |
| |
| flush_cache_all(); |
| outer_flush_all(); |
| |
| /* |
| * Issue a Data Synchronization Barrier instruction to ensure |
| * that all state saving has been completed. |
| */ |
| dsb(); |
| |
| /* Flush the DLB and wait ~7 usec */ |
| reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS); |
| reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK; |
| writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS); |
| |
| udelay(7); |
| |
| /* Set DRAM in battery backup mode */ |
| reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS); |
| reg &= ~SDRAM_CONFIG_SR_MODE_BIT; |
| writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS); |
| |
| /* Prepare to go to self-refresh */ |
| |
| srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS); |
| srcmd &= ~0x1F; |
| srcmd |= SDRAM_OPERATION_SELF_REFRESH; |
| |
| mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd); |
| |
| return 0; |
| } |
| |
| #define BOOT_INFO_ADDR 0x3000 |
| #define BOOT_MAGIC_WORD 0xdeadb002 |
| #define BOOT_MAGIC_LIST_END 0xffffffff |
| |
| /* |
| * Those registers are accessed before switching the internal register |
| * base, which is why we hardcode the 0xd0000000 base address, the one |
| * used by the SoC out of reset. |
| */ |
| #define MBUS_WINDOW_12_CTRL 0xd00200b0 |
| #define MBUS_INTERNAL_REG_ADDRESS 0xd0020080 |
| |
| #define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x)) |
| #define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x)) |
| |
| static phys_addr_t mvebu_internal_reg_base(void) |
| { |
| struct device_node *np; |
| __be32 in_addr[2]; |
| |
| np = of_find_node_by_name(NULL, "internal-regs"); |
| BUG_ON(!np); |
| |
| /* |
| * Ask the DT what is the internal register address on this |
| * platform. In the mvebu-mbus DT binding, 0xf0010000 |
| * corresponds to the internal register window. |
| */ |
| in_addr[0] = cpu_to_be32(0xf0010000); |
| in_addr[1] = 0x0; |
| |
| return of_translate_address(np, in_addr); |
| } |
| |
| static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr) |
| { |
| phys_addr_t resume_pc; |
| |
| resume_pc = virt_to_phys(armada_370_xp_cpu_resume); |
| |
| /* |
| * The bootloader expects the first two words to be a magic |
| * value (BOOT_MAGIC_WORD), followed by the address of the |
| * resume code to jump to. Then, it expects a sequence of |
| * (address, value) pairs, which can be used to restore the |
| * value of certain registers. This sequence must end with the |
| * BOOT_MAGIC_LIST_END magic value. |
| */ |
| |
| writel(BOOT_MAGIC_WORD, store_addr++); |
| writel(resume_pc, store_addr++); |
| |
| /* |
| * Some platforms remap their internal register base address |
| * to 0xf1000000. However, out of reset, window 12 starts at |
| * 0xf0000000 and ends at 0xf7ffffff, which would overlap with |
| * the internal registers. Therefore, disable window 12. |
| */ |
| writel(MBUS_WINDOW_12_CTRL, store_addr++); |
| writel(0x0, store_addr++); |
| |
| /* |
| * Set the internal register base address to the value |
| * expected by Linux, as read from the Device Tree. |
| */ |
| writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++); |
| writel(mvebu_internal_reg_base(), store_addr++); |
| |
| /* |
| * Ask the mvebu-mbus driver to store the SDRAM window |
| * configuration, which has to be restored by the bootloader |
| * before re-entering the kernel on resume. |
| */ |
| store_addr += mvebu_mbus_save_cpu_target(store_addr); |
| |
| writel(BOOT_MAGIC_LIST_END, store_addr); |
| } |
| |
| static int mvebu_pm_store_bootinfo(void) |
| { |
| u32 *store_addr; |
| |
| store_addr = phys_to_virt(BOOT_INFO_ADDR); |
| |
| if (of_machine_is_compatible("marvell,armadaxp")) |
| mvebu_pm_store_armadaxp_bootinfo(store_addr); |
| else |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int mvebu_enter_suspend(void) |
| { |
| int ret; |
| |
| ret = mvebu_pm_store_bootinfo(); |
| if (ret) |
| return ret; |
| |
| cpu_pm_enter(); |
| |
| cpu_suspend(0, mvebu_pm_powerdown); |
| |
| outer_resume(); |
| |
| mvebu_v7_pmsu_idle_exit(); |
| |
| set_cpu_coherent(); |
| |
| cpu_pm_exit(); |
| return 0; |
| } |
| |
| static int mvebu_pm_enter(suspend_state_t state) |
| { |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| cpu_do_idle(); |
| break; |
| case PM_SUSPEND_MEM: |
| pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n"); |
| return mvebu_enter_suspend(); |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int mvebu_pm_valid(suspend_state_t state) |
| { |
| if (state == PM_SUSPEND_STANDBY) |
| return 1; |
| |
| if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL) |
| return 1; |
| |
| return 0; |
| } |
| |
| static const struct platform_suspend_ops mvebu_pm_ops = { |
| .enter = mvebu_pm_enter, |
| .valid = mvebu_pm_valid, |
| }; |
| |
| static int __init mvebu_pm_init(void) |
| { |
| if (!of_machine_is_compatible("marvell,armadaxp") && |
| !of_machine_is_compatible("marvell,armada370") && |
| !of_machine_is_compatible("marvell,armada380") && |
| !of_machine_is_compatible("marvell,armada390")) |
| return -ENODEV; |
| |
| suspend_set_ops(&mvebu_pm_ops); |
| |
| return 0; |
| } |
| |
| |
| late_initcall(mvebu_pm_init); |
| |
| int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg, |
| u32 srcmd)) |
| { |
| struct device_node *np; |
| struct resource res; |
| |
| np = of_find_compatible_node(NULL, NULL, |
| "marvell,armada-xp-sdram-controller"); |
| if (!np) |
| return -ENODEV; |
| |
| if (of_address_to_resource(np, 0, &res)) { |
| of_node_put(np); |
| return -ENODEV; |
| } |
| |
| if (!request_mem_region(res.start, resource_size(&res), |
| np->full_name)) { |
| of_node_put(np); |
| return -EBUSY; |
| } |
| |
| sdram_ctrl = ioremap(res.start, resource_size(&res)); |
| if (!sdram_ctrl) { |
| release_mem_region(res.start, resource_size(&res)); |
| of_node_put(np); |
| return -ENOMEM; |
| } |
| |
| of_node_put(np); |
| |
| mvebu_board_pm_enter = board_pm_enter; |
| |
| return 0; |
| } |