cfg80211: make ethtool the driver's responsibility
Currently, cfg80211 tries to implement ethtool, but that doesn't
really scale well, with all the different operations. Make the
lower-level driver responsible for it, which currently only has
an effect on mac80211. It will similarly not scale well at that
level though, since mac80211 also has many drivers.
To cleanly implement this in mac80211, introduce a new file and
move some code to appropriate places.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index ae7c16a..6fe48f6 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -1719,3 +1719,137 @@
return ((ht_cap->mcs.tx_params & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1;
}
+
+void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct ieee80211_local *local = sdata->local;
+ struct rate_control_ref *ref = local->rate_ctrl;
+ struct timespec uptime;
+ u64 packets = 0;
+ u32 thr = 0;
+ int i, ac;
+
+ sinfo->generation = sdata->local->sta_generation;
+
+ sinfo->filled = STATION_INFO_INACTIVE_TIME |
+ STATION_INFO_RX_BYTES64 |
+ STATION_INFO_TX_BYTES64 |
+ STATION_INFO_RX_PACKETS |
+ STATION_INFO_TX_PACKETS |
+ STATION_INFO_TX_RETRIES |
+ STATION_INFO_TX_FAILED |
+ STATION_INFO_TX_BITRATE |
+ STATION_INFO_RX_BITRATE |
+ STATION_INFO_RX_DROP_MISC |
+ STATION_INFO_BSS_PARAM |
+ STATION_INFO_CONNECTED_TIME |
+ STATION_INFO_STA_FLAGS |
+ STATION_INFO_BEACON_LOSS_COUNT;
+
+ do_posix_clock_monotonic_gettime(&uptime);
+ sinfo->connected_time = uptime.tv_sec - sta->last_connected;
+
+ sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
+ sinfo->tx_bytes = 0;
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ sinfo->tx_bytes += sta->tx_bytes[ac];
+ packets += sta->tx_packets[ac];
+ }
+ sinfo->tx_packets = packets;
+ sinfo->rx_bytes = sta->rx_bytes;
+ sinfo->rx_packets = sta->rx_packets;
+ sinfo->tx_retries = sta->tx_retry_count;
+ sinfo->tx_failed = sta->tx_retry_failed;
+ sinfo->rx_dropped_misc = sta->rx_dropped;
+ sinfo->beacon_loss_count = sta->beacon_loss_count;
+
+ if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) ||
+ (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) {
+ sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
+ if (!local->ops->get_rssi ||
+ drv_get_rssi(local, sdata, &sta->sta, &sinfo->signal))
+ sinfo->signal = (s8)sta->last_signal;
+ sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal);
+ }
+ if (sta->chains) {
+ sinfo->filled |= STATION_INFO_CHAIN_SIGNAL |
+ STATION_INFO_CHAIN_SIGNAL_AVG;
+
+ sinfo->chains = sta->chains;
+ for (i = 0; i < ARRAY_SIZE(sinfo->chain_signal); i++) {
+ sinfo->chain_signal[i] = sta->chain_signal_last[i];
+ sinfo->chain_signal_avg[i] =
+ (s8) -ewma_read(&sta->chain_signal_avg[i]);
+ }
+ }
+
+ sta_set_rate_info_tx(sta, &sta->last_tx_rate, &sinfo->txrate);
+ sta_set_rate_info_rx(sta, &sinfo->rxrate);
+
+ if (ieee80211_vif_is_mesh(&sdata->vif)) {
+#ifdef CONFIG_MAC80211_MESH
+ sinfo->filled |= STATION_INFO_LLID |
+ STATION_INFO_PLID |
+ STATION_INFO_PLINK_STATE |
+ STATION_INFO_LOCAL_PM |
+ STATION_INFO_PEER_PM |
+ STATION_INFO_NONPEER_PM;
+
+ sinfo->llid = sta->llid;
+ sinfo->plid = sta->plid;
+ sinfo->plink_state = sta->plink_state;
+ if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) {
+ sinfo->filled |= STATION_INFO_T_OFFSET;
+ sinfo->t_offset = sta->t_offset;
+ }
+ sinfo->local_pm = sta->local_pm;
+ sinfo->peer_pm = sta->peer_pm;
+ sinfo->nonpeer_pm = sta->nonpeer_pm;
+#endif
+ }
+
+ sinfo->bss_param.flags = 0;
+ if (sdata->vif.bss_conf.use_cts_prot)
+ sinfo->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT;
+ if (sdata->vif.bss_conf.use_short_preamble)
+ sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
+ if (sdata->vif.bss_conf.use_short_slot)
+ sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
+ sinfo->bss_param.dtim_period = sdata->local->hw.conf.ps_dtim_period;
+ sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int;
+
+ sinfo->sta_flags.set = 0;
+ sinfo->sta_flags.mask = BIT(NL80211_STA_FLAG_AUTHORIZED) |
+ BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
+ BIT(NL80211_STA_FLAG_WME) |
+ BIT(NL80211_STA_FLAG_MFP) |
+ BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+ BIT(NL80211_STA_FLAG_ASSOCIATED) |
+ BIT(NL80211_STA_FLAG_TDLS_PEER);
+ if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED);
+ if (test_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_SHORT_PREAMBLE);
+ if (test_sta_flag(sta, WLAN_STA_WME))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_WME);
+ if (test_sta_flag(sta, WLAN_STA_MFP))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP);
+ if (test_sta_flag(sta, WLAN_STA_AUTH))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
+ if (test_sta_flag(sta, WLAN_STA_ASSOC))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
+ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
+
+ /* check if the driver has a SW RC implementation */
+ if (ref && ref->ops->get_expected_throughput)
+ thr = ref->ops->get_expected_throughput(sta->rate_ctrl_priv);
+ else
+ thr = drv_get_expected_throughput(local, &sta->sta);
+
+ if (thr != 0) {
+ sinfo->filled |= STATION_INFO_EXPECTED_THROUGHPUT;
+ sinfo->expected_throughput = thr;
+ }
+}