[POWERPC] Add mpc8641hpcn PCI/PCI-Express platform files.
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Wei Zhang <Wei.Zhang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
new file mode 100644
index 0000000..5180df7
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -0,0 +1,325 @@
+/*
+ * MPC86XX pci setup code
+ *
+ * Recode: ZHANG WEI <wei.zhang@freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/immap_86xx.h>
+#include <asm/pci-bridge.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+struct pcie_outbound_window_regs {
+ uint pexotar; /* 0x.0 - PCI Express outbound translation address register */
+ uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */
+ uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */
+ char res1[4];
+ uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */
+ char res2[12];
+};
+
+struct pcie_inbound_window_regs {
+ uint pexitar; /* 0x.0 - PCI Express inbound translation address register */
+ char res1[4];
+ uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */
+ uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */
+ uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */
+ char res2[12];
+};
+
+static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc)
+{
+ volatile struct ccsr_pex *pcie;
+ volatile struct pcie_outbound_window_regs *pcieow;
+ volatile struct pcie_inbound_window_regs *pcieiw;
+ int i = 0;
+
+ DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start,
+ rsrc->end - rsrc->start + 1);
+ pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+
+ /* Disable all windows (except pexowar0 since its ignored) */
+ pcie->pexowar1 = 0;
+ pcie->pexowar2 = 0;
+ pcie->pexowar3 = 0;
+ pcie->pexowar4 = 0;
+ pcie->pexiwar1 = 0;
+ pcie->pexiwar2 = 0;
+ pcie->pexiwar3 = 0;
+
+ pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1;
+ pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1;
+
+ /* Setup outbound MEM window */
+ for(i = 0; i < 3; i++)
+ if (hose->mem_resources[i].flags & IORESOURCE_MEM){
+ DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n",
+ hose->mem_resources[i].start,
+ hose->mem_resources[i].end
+ - hose->mem_resources[i].start + 1);
+ pcieow->pexotar = (hose->mem_resources[i].start) >> 12
+ & 0x000fffff;
+ pcieow->pexotear = 0;
+ pcieow->pexowbar = (hose->mem_resources[i].start) >> 12
+ & 0x000fffff;
+ /* Enable, Mem R/W */
+ pcieow->pexowar = 0x80044000 |
+ (__ilog2(hose->mem_resources[i].end
+ - hose->mem_resources[i].start + 1)
+ - 1);
+ pcieow++;
+ }
+
+ /* Setup outbound IO window */
+ if (hose->io_resource.flags & IORESOURCE_IO){
+ DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
+ hose->io_resource.start,
+ hose->io_resource.end - hose->io_resource.start + 1,
+ hose->io_base_phys);
+ pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff;
+ pcieow->pexotear = 0;
+ pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff;
+ /* Enable, IO R/W */
+ pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end
+ - hose->io_resource.start + 1) - 1);
+ }
+
+ /* Setup 2G inbound Memory Window @ 0 */
+ pcieiw->pexitar = 0x00000000;
+ pcieiw->pexiwbar = 0x00000000;
+ /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+ pcieiw->pexiwar = 0xa0f5501e;
+}
+
+static void __init
+mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
+{
+ volatile struct ccsr_pex *pcie;
+ u16 cmd;
+ unsigned int temps;
+
+ DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
+ pcie_offset, pcie_size);
+
+ pcie = ioremap(pcie_offset, pcie_size);
+
+ early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+ | PCI_COMMAND_IO;
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
+
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+
+ /* PCIE Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */
+ early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps);
+ temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
+ early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
+}
+
+int __init add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ int *bus_range;
+ int has_address = 0;
+ int primary = 0;
+
+ DBG("Adding PCIE host bridge %s\n", dev->full_name);
+
+ /* Fetch host bridge registers address */
+ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+ /* Get bus range if any */
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+ hose->arch_data = dev;
+ hose->set_cfg_type = 1;
+
+ /* last_busno = 0xfe cause by MPC8641 PCIE bug */
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xfe;
+
+ setup_indirect_pcie(hose, rsrc.start, rsrc.start + 0x4);
+
+ /* Setup the PCIE host controller. */
+ mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
+
+ if ((rsrc.start & 0xfffff) == 0x8000)
+ primary = 1;
+
+ printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
+ "Firmware bus number: %d->%d\n",
+ rsrc.start, hose->first_busno, hose->last_busno);
+
+ DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+ hose, hose->cfg_addr, hose->cfg_data);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Setup PEX window registers */
+ setup_pcie_atmu(hose, &rsrc);
+
+ return 0;
+}
+
+static void __devinit quirk_ali1575(struct pci_dev *dev)
+{
+ unsigned short temp;
+
+ /*
+ * ALI1575 interrupts route table setup:
+ *
+ * IRQ pin IRQ#
+ * PIRQA ---- 3
+ * PIRQB ---- 4
+ * PIRQC ---- 5
+ * PIRQD ---- 6
+ * PIRQE ---- 9
+ * PIRQF ---- 10
+ * PIRQG ---- 11
+ * PIRQH ---- 12
+ *
+ * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+ * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+ */
+ pci_write_config_dword(dev, 0x48, 0xb9317542);
+
+ /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x86, 0x0c);
+
+ /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x87, 0x0d);
+
+ /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x88, 0x0f);
+
+ /* USB 2.0 controller, interrupt: PIRQ7 */
+ pci_write_config_byte(dev, 0x74, 0x06);
+
+ /* Audio controller, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x8a, 0x0c);
+
+ /* Modem controller, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x8b, 0x0d);
+
+ /* HD audio controller, interrupt: PIRQG */
+ pci_write_config_byte(dev, 0x8c, 0x0e);
+
+ /* Serial ATA interrupt: PIRQD */
+ pci_write_config_byte(dev, 0x8d, 0x0b);
+
+ /* SMB interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8e, 0x0f);
+
+ /* PMU ACPI SCI interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8f, 0x0f);
+
+ /* Primary PATA IDE IRQ: 14
+ * Secondary PATA IDE IRQ: 15
+ */
+ pci_write_config_byte(dev, 0x44, 0x3d);
+ pci_write_config_byte(dev, 0x75, 0x0f);
+
+ /* Set IRQ14 and IRQ15 to legacy IRQs */
+ pci_read_config_word(dev, 0x46, &temp);
+ temp |= 0xc000;
+ pci_write_config_word(dev, 0x46, temp);
+
+ /* Set i8259 interrupt trigger
+ * IRQ 3: Level
+ * IRQ 4: Level
+ * IRQ 5: Level
+ * IRQ 6: Level
+ * IRQ 7: Level
+ * IRQ 9: Level
+ * IRQ 10: Level
+ * IRQ 11: Level
+ * IRQ 12: Level
+ * IRQ 14: Edge
+ * IRQ 15: Edge
+ */
+ outb(0xfa, 0x4d0);
+ outb(0x1e, 0x4d1);
+}
+
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+ unsigned char c;
+
+ pci_read_config_byte(dev,0x83,&c);
+ c |= 0x80;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_write_config_byte(dev, 0x09, 0x01);
+ pci_write_config_byte(dev, 0x0a, 0x06);
+
+ pci_read_config_byte(dev,0x83,&c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_read_config_byte(dev,0x84,&c);
+ c |= 0x01;
+ pci_write_config_byte(dev, 0x84, c);
+}
+
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned short temp;
+ pci_write_config_word(dev, 0x04, 0x0405);
+ pci_read_config_word(dev, 0x4a, &temp);
+ temp |= 0x1000;
+ pci_write_config_word(dev, 0x4a, temp);
+}
+
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+ unsigned char temp;
+ pci_write_config_word(dev, 0x04, 0x0007);
+ pci_read_config_byte(dev, 0x7c, &temp);
+ pci_write_config_byte(dev, 0x7c, 0x80);
+ pci_write_config_byte(dev, 0x09, 0x01);
+ pci_write_config_byte(dev, 0x7c, temp);
+ dev->class |= 0x1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);