| /* |
| * Driver for Atmel Pulse Width Modulation Controller |
| * |
| * Copyright (C) 2013 Atmel Corporation |
| * Bo Shen <voice.shen@atmel.com> |
| * |
| * Licensed under GPLv2. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| /* The following is global registers for PWM controller */ |
| #define PWM_ENA 0x04 |
| #define PWM_DIS 0x08 |
| #define PWM_SR 0x0C |
| /* Bit field in SR */ |
| #define PWM_SR_ALL_CH_ON 0x0F |
| |
| /* The following register is PWM channel related registers */ |
| #define PWM_CH_REG_OFFSET 0x200 |
| #define PWM_CH_REG_SIZE 0x20 |
| |
| #define PWM_CMR 0x0 |
| /* Bit field in CMR */ |
| #define PWM_CMR_CPOL (1 << 9) |
| #define PWM_CMR_UPD_CDTY (1 << 10) |
| |
| /* The following registers for PWM v1 */ |
| #define PWMV1_CDTY 0x04 |
| #define PWMV1_CPRD 0x08 |
| #define PWMV1_CUPD 0x10 |
| |
| /* The following registers for PWM v2 */ |
| #define PWMV2_CDTY 0x04 |
| #define PWMV2_CDTYUPD 0x08 |
| #define PWMV2_CPRD 0x0C |
| #define PWMV2_CPRDUPD 0x10 |
| |
| /* |
| * Max value for duty and period |
| * |
| * Although the duty and period register is 32 bit, |
| * however only the LSB 16 bits are significant. |
| */ |
| #define PWM_MAX_DTY 0xFFFF |
| #define PWM_MAX_PRD 0xFFFF |
| #define PRD_MAX_PRES 10 |
| |
| struct atmel_pwm_chip { |
| struct pwm_chip chip; |
| struct clk *clk; |
| void __iomem *base; |
| |
| void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, |
| unsigned long dty, unsigned long prd); |
| }; |
| |
| static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct atmel_pwm_chip, chip); |
| } |
| |
| static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip, |
| unsigned long offset) |
| { |
| return readl_relaxed(chip->base + offset); |
| } |
| |
| static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip, |
| unsigned long offset, unsigned long val) |
| { |
| writel_relaxed(val, chip->base + offset); |
| } |
| |
| static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip, |
| unsigned int ch, unsigned long offset) |
| { |
| unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; |
| |
| return readl_relaxed(chip->base + base + offset); |
| } |
| |
| static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip, |
| unsigned int ch, unsigned long offset, |
| unsigned long val) |
| { |
| unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; |
| |
| writel_relaxed(val, chip->base + base + offset); |
| } |
| |
| static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| unsigned long clk_rate, prd, dty; |
| unsigned long long div; |
| unsigned int pres = 0; |
| int ret; |
| |
| if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) { |
| dev_err(chip->dev, "cannot change PWM period while enabled\n"); |
| return -EBUSY; |
| } |
| |
| clk_rate = clk_get_rate(atmel_pwm->clk); |
| div = clk_rate; |
| |
| /* Calculate the period cycles */ |
| while (div > PWM_MAX_PRD) { |
| div = clk_rate / (1 << pres); |
| div = div * period_ns; |
| /* 1/Hz = 100000000 ns */ |
| do_div(div, 1000000000); |
| |
| if (pres++ > PRD_MAX_PRES) { |
| dev_err(chip->dev, "pres exceeds the maximum value\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* Calculate the duty cycles */ |
| prd = div; |
| div *= duty_ns; |
| do_div(div, period_ns); |
| dty = div; |
| |
| ret = clk_enable(atmel_pwm->clk); |
| if (ret) { |
| dev_err(chip->dev, "failed to enable PWM clock\n"); |
| return ret; |
| } |
| |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, pres); |
| atmel_pwm->config(chip, pwm, dty, prd); |
| |
| clk_disable(atmel_pwm->clk); |
| return ret; |
| } |
| |
| static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm, |
| unsigned long dty, unsigned long prd) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| unsigned int val; |
| |
| if (test_bit(PWMF_ENABLED, &pwm->flags)) { |
| /* |
| * If the PWM channel is enabled, using the update register, |
| * it needs to set bit 10 of CMR to 0 |
| */ |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty); |
| |
| val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); |
| val &= ~PWM_CMR_UPD_CDTY; |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); |
| } else { |
| /* |
| * If the PWM channel is disabled, write value to duty and |
| * period registers directly. |
| */ |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty); |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd); |
| } |
| } |
| |
| static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm, |
| unsigned long dty, unsigned long prd) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| |
| if (test_bit(PWMF_ENABLED, &pwm->flags)) { |
| /* |
| * If the PWM channel is enabled, using the duty update register |
| * to update the value. |
| */ |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty); |
| } else { |
| /* |
| * If the PWM channel is disabled, write value to duty and |
| * period registers directly. |
| */ |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty); |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd); |
| } |
| } |
| |
| static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, |
| enum pwm_polarity polarity) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| u32 val; |
| int ret; |
| |
| val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); |
| |
| if (polarity == PWM_POLARITY_NORMAL) |
| val &= ~PWM_CMR_CPOL; |
| else |
| val |= PWM_CMR_CPOL; |
| |
| ret = clk_enable(atmel_pwm->clk); |
| if (ret) { |
| dev_err(chip->dev, "failed to enable PWM clock\n"); |
| return ret; |
| } |
| |
| atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); |
| |
| clk_disable(atmel_pwm->clk); |
| |
| return 0; |
| } |
| |
| static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| int ret; |
| |
| ret = clk_enable(atmel_pwm->clk); |
| if (ret) { |
| dev_err(chip->dev, "failed to enable PWM clock\n"); |
| return ret; |
| } |
| |
| atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm); |
| |
| return 0; |
| } |
| |
| static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); |
| |
| atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm); |
| |
| clk_disable(atmel_pwm->clk); |
| } |
| |
| static const struct pwm_ops atmel_pwm_ops = { |
| .config = atmel_pwm_config, |
| .set_polarity = atmel_pwm_set_polarity, |
| .enable = atmel_pwm_enable, |
| .disable = atmel_pwm_disable, |
| .owner = THIS_MODULE, |
| }; |
| |
| struct atmel_pwm_data { |
| void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, |
| unsigned long dty, unsigned long prd); |
| }; |
| |
| static const struct atmel_pwm_data atmel_pwm_data_v1 = { |
| .config = atmel_pwm_config_v1, |
| }; |
| |
| static const struct atmel_pwm_data atmel_pwm_data_v2 = { |
| .config = atmel_pwm_config_v2, |
| }; |
| |
| static const struct platform_device_id atmel_pwm_devtypes[] = { |
| { |
| .name = "at91sam9rl-pwm", |
| .driver_data = (kernel_ulong_t)&atmel_pwm_data_v1, |
| }, { |
| .name = "sama5d3-pwm", |
| .driver_data = (kernel_ulong_t)&atmel_pwm_data_v2, |
| }, { |
| /* sentinel */ |
| }, |
| }; |
| MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes); |
| |
| static const struct of_device_id atmel_pwm_dt_ids[] = { |
| { |
| .compatible = "atmel,at91sam9rl-pwm", |
| .data = &atmel_pwm_data_v1, |
| }, { |
| .compatible = "atmel,sama5d3-pwm", |
| .data = &atmel_pwm_data_v2, |
| }, { |
| /* sentinel */ |
| }, |
| }; |
| MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids); |
| |
| static inline const struct atmel_pwm_data * |
| atmel_pwm_get_driver_data(struct platform_device *pdev) |
| { |
| if (pdev->dev.of_node) { |
| const struct of_device_id *match; |
| |
| match = of_match_device(atmel_pwm_dt_ids, &pdev->dev); |
| if (!match) |
| return NULL; |
| |
| return match->data; |
| } else { |
| const struct platform_device_id *id; |
| |
| id = platform_get_device_id(pdev); |
| |
| return (struct atmel_pwm_data *)id->driver_data; |
| } |
| } |
| |
| static int atmel_pwm_probe(struct platform_device *pdev) |
| { |
| const struct atmel_pwm_data *data; |
| struct atmel_pwm_chip *atmel_pwm; |
| struct resource *res; |
| int ret; |
| |
| data = atmel_pwm_get_driver_data(pdev); |
| if (!data) |
| return -ENODEV; |
| |
| atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL); |
| if (!atmel_pwm) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(atmel_pwm->base)) |
| return PTR_ERR(atmel_pwm->base); |
| |
| atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(atmel_pwm->clk)) |
| return PTR_ERR(atmel_pwm->clk); |
| |
| ret = clk_prepare(atmel_pwm->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to prepare PWM clock\n"); |
| return ret; |
| } |
| |
| atmel_pwm->chip.dev = &pdev->dev; |
| atmel_pwm->chip.ops = &atmel_pwm_ops; |
| |
| if (pdev->dev.of_node) { |
| atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags; |
| atmel_pwm->chip.of_pwm_n_cells = 3; |
| } |
| |
| atmel_pwm->chip.base = -1; |
| atmel_pwm->chip.npwm = 4; |
| atmel_pwm->config = data->config; |
| |
| ret = pwmchip_add(&atmel_pwm->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret); |
| goto unprepare_clk; |
| } |
| |
| platform_set_drvdata(pdev, atmel_pwm); |
| |
| return ret; |
| |
| unprepare_clk: |
| clk_unprepare(atmel_pwm->clk); |
| return ret; |
| } |
| |
| static int atmel_pwm_remove(struct platform_device *pdev) |
| { |
| struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev); |
| |
| clk_unprepare(atmel_pwm->clk); |
| |
| return pwmchip_remove(&atmel_pwm->chip); |
| } |
| |
| static struct platform_driver atmel_pwm_driver = { |
| .driver = { |
| .name = "atmel-pwm", |
| .of_match_table = of_match_ptr(atmel_pwm_dt_ids), |
| }, |
| .id_table = atmel_pwm_devtypes, |
| .probe = atmel_pwm_probe, |
| .remove = atmel_pwm_remove, |
| }; |
| module_platform_driver(atmel_pwm_driver); |
| |
| MODULE_ALIAS("platform:atmel-pwm"); |
| MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); |
| MODULE_DESCRIPTION("Atmel PWM driver"); |
| MODULE_LICENSE("GPL v2"); |