V4L/DVB (11300): cx88: convert to v4l2_subdev.
Convert cx88 to use v4l2_subdev since the old i2c autoprobing mechanism
will be removed.
Added code to explicitly load tvaudio where needed. Also fix the rtc-isl1208
support: since that driver no longer supports autoprobing it has to be
loaded using the new i2c API.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 5b0fbc6..434237a 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -431,8 +431,7 @@
struct v4l2_routing route;
route.input = INPUT(input).audioroute;
- cx88_call_i2c_clients(core,
- VIDIOC_INT_S_AUDIO_ROUTING, &route);
+ call_all(core, audio, s_routing, &route);
}
/* cx2388's C-ADC is connected to the tuner only.
When used with S-Video, that ADC is busy dealing with
@@ -827,8 +826,7 @@
struct v4l2_routing route;
route.input = core->board.radio.audioroute;
- cx88_call_i2c_clients(core,
- VIDIOC_INT_S_AUDIO_ROUTING, &route);
+ call_all(core, audio, s_routing, &route);
}
/* "I2S ADC mode" */
core->tvaudio = WW_I2SADC;
@@ -839,7 +837,7 @@
cx88_set_tvaudio(core);
cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
}
- cx88_call_i2c_clients(core,AUDC_SET_RADIO,NULL);
+ call_all(core, tuner, s_radio);
}
unlock_kernel();
@@ -933,7 +931,7 @@
kfree(fh);
if(atomic_dec_and_test(&dev->core->users))
- cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
+ call_all(dev->core, core, s_standby, 0);
return 0;
}
@@ -1395,7 +1393,7 @@
f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = core->freq;
- cx88_call_i2c_clients(core,VIDIOC_G_FREQUENCY,f);
+ call_all(core, tuner, g_frequency, f);
return 0;
}
@@ -1411,7 +1409,7 @@
mutex_lock(&core->lock);
core->freq = f->frequency;
cx88_newstation(core);
- cx88_call_i2c_clients(core,VIDIOC_S_FREQUENCY,f);
+ call_all(core, tuner, s_frequency, f);
/* When changing channels it is required to reset TVAUDIO */
msleep (10);
@@ -1493,7 +1491,7 @@
strcpy(t->name, "Radio");
t->type = V4L2_TUNER_RADIO;
- cx88_call_i2c_clients(core,VIDIOC_G_TUNER,t);
+ call_all(core, tuner, g_tuner, t);
return 0;
}
@@ -1527,7 +1525,7 @@
if (0 != t->index)
return -EINVAL;
- cx88_call_i2c_clients(core,VIDIOC_S_TUNER,t);
+ call_all(core, tuner, s_tuner, t);
return 0;
}
@@ -1884,12 +1882,30 @@
/* load and configure helper modules */
if (core->board.audio_chip == V4L2_IDENT_WM8775)
- request_module("wm8775");
+ v4l2_i2c_new_subdev(&core->i2c_adap,
+ "wm8775", "wm8775", 0x36 >> 1);
+
+ if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
+ /* This probes for a tda9874 as is used on some
+ Pixelview Ultra boards. */
+ static const unsigned short i2c_addr[] = {
+ 0xb0 >> 1, I2C_CLIENT_END
+ };
+
+ v4l2_i2c_new_probed_subdev(&core->i2c_adap,
+ "tvaudio", "tvaudio", i2c_addr);
+ }
switch (core->boardnr) {
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
- case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: {
+ static struct i2c_board_info rtc_info = {
+ I2C_BOARD_INFO("isl1208", 0x6f)
+ };
+
request_module("rtc-isl1208");
+ core->i2c_rtc = i2c_new_device(&core->i2c_adap, &rtc_info);
+ }
/* break intentionally omitted */
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
request_module("ir-kbd-i2c");