ARM: Xilinx: Adding Xilinx board support
The 1st board support is minimal to get a system up and running
on the Xilinx platform.
This platform reuses the clock implementation from plat-versatile, and
it depends entirely on CONFIG_OF support. There is only one board
support file which obtains all device information from a device tree
dtb file which is passed to the kernel at boot time.
Signed-off-by: John Linn <john.linn@xilinx.com>
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
new file mode 100644
index 0000000..b3ac5c2
--- /dev/null
+++ b/arch/arm/mach-zynq/common.c
@@ -0,0 +1,102 @@
+/*
+ * This file contains common code that is intended to be used across
+ * boards so that it's not replicated.
+ *
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/map.h>
+#include <asm/page.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/zynq_soc.h>
+#include <mach/clkdev.h>
+#include "common.h"
+
+static struct of_device_id zynq_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ {}
+};
+
+/**
+ * xilinx_init_machine() - System specific initialization, intended to be
+ * called from board specific initialization.
+ */
+void __init xilinx_init_machine(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * 64KB way size, 8-way associativity, parity disabled
+ */
+ l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF);
+#endif
+
+ of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
+}
+
+/**
+ * xilinx_irq_init() - Interrupt controller initialization for the GIC.
+ */
+void __init xilinx_irq_init(void)
+{
+ gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
+}
+
+/* The minimum devices needed to be mapped before the VM system is up and
+ * running include the GIC, UART and Timer Counter.
+ */
+
+static struct map_desc io_desc[] __initdata = {
+ {
+ .virtual = TTC0_VIRT,
+ .pfn = __phys_to_pfn(TTC0_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = SCU_PERIPH_VIRT,
+ .pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = PL310_L2CC_VIRT,
+ .pfn = __phys_to_pfn(PL310_L2CC_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+
+#ifdef CONFIG_DEBUG_LL
+ {
+ .virtual = UART0_VIRT,
+ .pfn = __phys_to_pfn(UART0_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+
+};
+
+/**
+ * xilinx_map_io() - Create memory mappings needed for early I/O.
+ */
+void __init xilinx_map_io(void)
+{
+ iotable_init(io_desc, ARRAY_SIZE(io_desc));
+}