| /* |
| * drivers/net/phy/marvell.c |
| * |
| * Driver for Marvell PHYs |
| * |
| * Author: Andy Fleming |
| * |
| * Copyright (c) 2004 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| |
| #define MII_M1011_IEVENT 0x13 |
| #define MII_M1011_IEVENT_CLEAR 0x0000 |
| |
| #define MII_M1011_IMASK 0x12 |
| #define MII_M1011_IMASK_INIT 0x6400 |
| #define MII_M1011_IMASK_CLEAR 0x0000 |
| |
| #define MII_M1011_PHY_SCR 0x10 |
| #define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060 |
| |
| #define MII_M1145_PHY_EXT_CR 0x14 |
| #define MII_M1145_RGMII_RX_DELAY 0x0080 |
| #define MII_M1145_RGMII_TX_DELAY 0x0002 |
| |
| #define M1145_DEV_FLAGS_RESISTANCE 0x00000001 |
| |
| #define MII_M1111_PHY_LED_CONTROL 0x18 |
| #define MII_M1111_PHY_LED_DIRECT 0x4100 |
| #define MII_M1111_PHY_LED_COMBINE 0x411c |
| |
| MODULE_DESCRIPTION("Marvell PHY driver"); |
| MODULE_AUTHOR("Andy Fleming"); |
| MODULE_LICENSE("GPL"); |
| |
| static int marvell_ack_interrupt(struct phy_device *phydev) |
| { |
| int err; |
| |
| /* Clear the interrupts by reading the reg */ |
| err = phy_read(phydev, MII_M1011_IEVENT); |
| |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static int marvell_config_intr(struct phy_device *phydev) |
| { |
| int err; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT); |
| else |
| err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); |
| |
| return err; |
| } |
| |
| static int marvell_config_aneg(struct phy_device *phydev) |
| { |
| int err; |
| |
| /* The Marvell PHY has an errata which requires |
| * that certain registers get written in order |
| * to restart autonegotiation */ |
| err = phy_write(phydev, MII_BMCR, BMCR_RESET); |
| |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1d, 0x1f); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1e, 0x200c); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1d, 0x5); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1e, 0); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1e, 0x100); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, MII_M1011_PHY_SCR, |
| MII_M1011_PHY_SCR_AUTO_CROSS); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, |
| MII_M1111_PHY_LED_DIRECT); |
| if (err < 0) |
| return err; |
| |
| err = genphy_config_aneg(phydev); |
| |
| return err; |
| } |
| |
| static int m88e1145_config_init(struct phy_device *phydev) |
| { |
| int err; |
| |
| /* Take care of errata E0 & E1 */ |
| err = phy_write(phydev, 0x1d, 0x001b); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1e, 0x418f); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1d, 0x0016); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1e, 0xa2da); |
| if (err < 0) |
| return err; |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { |
| int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR); |
| if (temp < 0) |
| return temp; |
| |
| temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY); |
| |
| err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp); |
| if (err < 0) |
| return err; |
| |
| if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) { |
| err = phy_write(phydev, 0x1d, 0x0012); |
| if (err < 0) |
| return err; |
| |
| temp = phy_read(phydev, 0x1e); |
| if (temp < 0) |
| return temp; |
| |
| temp &= 0xf03f; |
| temp |= 2 << 9; /* 36 ohm */ |
| temp |= 2 << 6; /* 39 ohm */ |
| |
| err = phy_write(phydev, 0x1e, temp); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1d, 0x3); |
| if (err < 0) |
| return err; |
| |
| err = phy_write(phydev, 0x1e, 0x8000); |
| if (err < 0) |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct phy_driver m88e1101_driver = { |
| .phy_id = 0x01410c60, |
| .phy_id_mask = 0xfffffff0, |
| .name = "Marvell 88E1101", |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_aneg = &marvell_config_aneg, |
| .read_status = &genphy_read_status, |
| .ack_interrupt = &marvell_ack_interrupt, |
| .config_intr = &marvell_config_intr, |
| .driver = {.owner = THIS_MODULE,}, |
| }; |
| |
| static struct phy_driver m88e1111s_driver = { |
| .phy_id = 0x01410cc0, |
| .phy_id_mask = 0xfffffff0, |
| .name = "Marvell 88E1111", |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_aneg = &marvell_config_aneg, |
| .read_status = &genphy_read_status, |
| .ack_interrupt = &marvell_ack_interrupt, |
| .config_intr = &marvell_config_intr, |
| .driver = {.owner = THIS_MODULE,}, |
| }; |
| |
| static struct phy_driver m88e1145_driver = { |
| .phy_id = 0x01410cd0, |
| .phy_id_mask = 0xfffffff0, |
| .name = "Marvell 88E1145", |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_init = &m88e1145_config_init, |
| .config_aneg = &marvell_config_aneg, |
| .read_status = &genphy_read_status, |
| .ack_interrupt = &marvell_ack_interrupt, |
| .config_intr = &marvell_config_intr, |
| .driver = {.owner = THIS_MODULE,}, |
| }; |
| |
| static int __init marvell_init(void) |
| { |
| int ret; |
| |
| ret = phy_driver_register(&m88e1101_driver); |
| if (ret) |
| return ret; |
| |
| ret = phy_driver_register(&m88e1111s_driver); |
| if (ret) |
| goto err1111s; |
| |
| ret = phy_driver_register(&m88e1145_driver); |
| if (ret) |
| goto err1145; |
| |
| return 0; |
| |
| err1145: |
| phy_driver_unregister(&m88e1111s_driver); |
| err1111s: |
| phy_driver_unregister(&m88e1101_driver); |
| return ret; |
| } |
| |
| static void __exit marvell_exit(void) |
| { |
| phy_driver_unregister(&m88e1101_driver); |
| phy_driver_unregister(&m88e1111s_driver); |
| phy_driver_unregister(&m88e1145_driver); |
| } |
| |
| module_init(marvell_init); |
| module_exit(marvell_exit); |