ARCv2: barriers
ARCv2 based HS38 cores are weakly ordered and thus explicit barriers for
kernel proper.
SMP barrier is provided by DMB instruction which also guarantees local
barrier hence used as backend of smp_*mb() as well as *mb() APIs
Also hookup barriers into MMIO accessors to avoid ordering issues in IO
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index be0c39e..59e2dd1 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -1,5 +1,4 @@
generic-y += auxvec.h
-generic-y += barrier.h
generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += clkdev.h
diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h
new file mode 100644
index 0000000..a720998
--- /dev/null
+++ b/arch/arc/include/asm/barrier.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#ifdef CONFIG_ISA_ARCV2
+
+/*
+ * ARCv2 based HS38 cores are in-order issue, but still weakly ordered
+ * due to micro-arch buffering/queuing of load/store, cache hit vs. miss ...
+ *
+ * Explicit barrier provided by DMB instruction
+ * - Operand supports fine grained load/store/load+store semantics
+ * - Ensures that selected memory operation issued before it will complete
+ * before any subsequent memory operation of same type
+ * - DMB guarantees SMP as well as local barrier semantics
+ * (asm-generic/barrier.h ensures sane smp_*mb if not defined here, i.e.
+ * UP: barrier(), SMP: smp_*mb == *mb)
+ * - DSYNC provides DMB+completion_of_cache_bpu_maintenance_ops hence not needed
+ * in the general case. Plus it only provides full barrier.
+ */
+
+#define mb() asm volatile("dmb 3\n" : : : "memory")
+#define rmb() asm volatile("dmb 1\n" : : : "memory")
+#define wmb() asm volatile("dmb 2\n" : : : "memory")
+
+#endif
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+/*
+ * ARCompact based cores (ARC700) only have SYNC instruction which is super
+ * heavy weight as it flushes the pipeline as well.
+ * There are no real SMP implementations of such cores.
+ */
+
+#define mb() asm volatile("sync\n" : : : "memory")
+#endif
+
+#include <asm-generic/barrier.h>
+
+#endif
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index cabd518..00f97a2 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -98,9 +98,45 @@
}
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
+#ifdef CONFIG_ISA_ARCV2
+#include <asm/barrier.h>
+#define __iormb() rmb()
+#define __iowmb() wmb()
+#else
+#define __iormb() do { } while (0)
+#define __iowmb() do { } while (0)
+#endif
+
+/*
+ * MMIO can also get buffered/optimized in micro-arch, so barriers needed
+ * Based on ARM model for the typical use case
+ *
+ * <ST [DMA buffer]>
+ * <writel MMIO "go" reg>
+ * or:
+ * <readl MMIO "status" reg>
+ * <LD [DMA buffer]>
+ *
+ * http://lkml.kernel.org/r/20150622133656.GG1583@arm.com
+ */
+#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c) ({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c) ({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); })
+
+/*
+ * Relaxed API for drivers which can handle any ordering themselves
+ */
+#define readb_relaxed(c) __raw_readb(c)
+#define readw_relaxed(c) __raw_readw(c)
+#define readl_relaxed(c) __raw_readl(c)
+
+#define writeb_relaxed(v,c) __raw_writeb(v,c)
+#define writew_relaxed(v,c) __raw_writew(v,c)
+#define writel_relaxed(v,c) __raw_writel(v,c)
#include <asm-generic/io.h>