Staging: et131x: kill the Q_ADDR struct
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h
index 5abaee9..b395f9c 100644
--- a/drivers/staging/et131x/et1310_address_map.h
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -61,41 +61,13 @@
/* START OF GLOBAL REGISTER ADDRESS MAP */
-typedef union _Q_ADDR_t {
- u32 value;
- struct {
-#ifdef _BIT_FIELDS_HTOL
- u32 unused:22; /* bits 10-31 */
- u32 addr:10; /* bits 0-9 */
-#else
- u32 addr:10; /* bits 0-9 */
- u32 unused:22; /* bits 10-31 */
-#endif
- } bits;
-} Q_ADDR_t, *PQ_ADDR_t;
-
/*
- * structure for tx queue start address reg in global address map
- * located at address 0x0000
- * Defined earlier (Q_ADDR_t)
- */
-
-/*
- * structure for tx queue end address reg in global address map
- * located at address 0x0004
- * Defined earlier (Q_ADDR_t)
- */
-
-/*
- * structure for rx queue start address reg in global address map
- * located at address 0x0008
- * Defined earlier (Q_ADDR_t)
- */
-
-/*
- * structure for rx queue end address reg in global address map
- * located at address 0x000C
- * Defined earlier (Q_ADDR_t)
+ * 10bit registers
+ *
+ * Tx queue start address reg in global address map at address 0x0000
+ * tx queue end address reg in global address map at address 0x0004
+ * rx queue start address reg in global address map at address 0x0008
+ * rx queue end address reg in global address map at address 0x000C
*/
/*
@@ -295,10 +267,10 @@
* Located at address 0x0000
*/
typedef struct _GLOBAL_t { /* Location: */
- Q_ADDR_t txq_start_addr; /* 0x0000 */
- Q_ADDR_t txq_end_addr; /* 0x0004 */
- Q_ADDR_t rxq_start_addr; /* 0x0008 */
- Q_ADDR_t rxq_end_addr; /* 0x000C */
+ u32 txq_start_addr; /* 0x0000 */
+ u32 txq_end_addr; /* 0x0004 */
+ u32 rxq_start_addr; /* 0x0008 */
+ u32 rxq_end_addr; /* 0x000C */
PM_CSR_t pm_csr; /* 0x0010 */
u32 unused; /* 0x0014 */
INTERRUPT_t int_status; /* 0x0018 */
diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c
index 2767e4d..47089bf 100644
--- a/drivers/staging/et131x/et1310_jagcore.c
+++ b/drivers/staging/et131x/et1310_jagcore.c
@@ -112,33 +112,26 @@
* and Rx as it desires. Our default is to split it
* 50/50:
*/
- writel(0, &pGbl->rxq_start_addr.value);
- writel(PARM_RX_MEM_END_DEF,
- &pGbl->rxq_end_addr.value);
- writel(PARM_RX_MEM_END_DEF + 1,
- &pGbl->txq_start_addr.value);
- writel(INTERNAL_MEM_SIZE - 1,
- &pGbl->txq_end_addr.value);
+ writel(0, &pGbl->rxq_start_addr);
+ writel(PARM_RX_MEM_END_DEF, &pGbl->rxq_end_addr);
+ writel(PARM_RX_MEM_END_DEF + 1, &pGbl->txq_start_addr);
+ writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr);
} else if (etdev->RegistryJumboPacket < 8192) {
/* For jumbo packets > 2k but < 8k, split 50-50. */
- writel(0, &pGbl->rxq_start_addr.value);
- writel(INTERNAL_MEM_RX_OFFSET,
- &pGbl->rxq_end_addr.value);
- writel(INTERNAL_MEM_RX_OFFSET + 1,
- &pGbl->txq_start_addr.value);
- writel(INTERNAL_MEM_SIZE - 1,
- &pGbl->txq_end_addr.value);
+ writel(0, &pGbl->rxq_start_addr);
+ writel(INTERNAL_MEM_RX_OFFSET, &pGbl->rxq_end_addr);
+ writel(INTERNAL_MEM_RX_OFFSET + 1, &pGbl->txq_start_addr);
+ writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr);
} else {
/* 9216 is the only packet size greater than 8k that
* is available. The Tx buffer has to be big enough
* for one whole packet on the Tx side. We'll make
* the Tx 9408, and give the rest to Rx
*/
- writel(0x0000, &pGbl->rxq_start_addr.value);
- writel(0x01b3, &pGbl->rxq_end_addr.value);
- writel(0x01b4, &pGbl->txq_start_addr.value);
- writel(INTERNAL_MEM_SIZE - 1,
- &pGbl->txq_end_addr.value);
+ writel(0x0000, &pGbl->rxq_start_addr);
+ writel(0x01b3, &pGbl->rxq_end_addr);
+ writel(0x01b4, &pGbl->txq_start_addr);
+ writel(INTERNAL_MEM_SIZE - 1,&pGbl->txq_end_addr);
}
/* Initialize the loopback register. Disable all loopbacks. */
@@ -149,13 +142,13 @@
* RxMAC will write data into the space, and the TxMAC will
* read it out.
*/
- writel(0, &pGbl->rxq_start_addr.value);
- writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr.value);
- writel(0, &pGbl->txq_start_addr.value);
- writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value);
+ writel(0, &pGbl->rxq_start_addr);
+ writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr);
+ writel(0, &pGbl->txq_start_addr);
+ writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr);
/* Initialize the loopback register (MAC loopback). */
- writel(1, &pGbl->loopback.value);
+ writel(1, &pGbl->loopback);
}
/* MSI Register */
diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c
index 779130b..945b4b5 100644
--- a/drivers/staging/et131x/et131x_debug.c
+++ b/drivers/staging/et131x/et131x_debug.c
@@ -1,3 +1,4 @@
+/*
* Agere Systems Inc.
* 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
*
@@ -135,6 +136,8 @@
}
}
+#define NUM_BLOCKS 8
+
static const char *BlockNames[NUM_BLOCKS] = {
"Global", "Tx DMA", "Rx DMA", "Tx MAC",
"Rx MAC", "MAC", "MAC Stat", "MMC"
@@ -148,7 +151,6 @@
* Dumps the first 64 regs of each block of the et-1310 (each block is
* mapped to a new page, each page is 4096 bytes).
*/
-#define NUM_BLOCKS 8
void DumpDeviceBlock(int debug, struct et131x_adapter *etdev,
u32 block)
{