ARM: 7547/4: cache-l2x0: add support for Aurora L2 cache ctrl
Aurora Cache Controller was designed to be compatible with the ARM L2
Cache Controller. It comes with some difference or improvement such
as:
- no cache id part number available through hardware (need to get it
by the DT).
- always write through mode available.
- two flavors of the controller outer cache and system cache (meaning
maintenance operations on L1 are broadcasted to the L2 and L2
performs the same operation).
- in outer cache mode, the cache maintenance operations are improved and
can be done on a range inside a page and are not limited to a cache
line.
Tested-and-Reviewed-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mm/cache-aurora-l2.h b/arch/arm/mm/cache-aurora-l2.h
new file mode 100644
index 0000000..c861247
--- /dev/null
+++ b/arch/arm/mm/cache-aurora-l2.h
@@ -0,0 +1,55 @@
+/*
+ * AURORA shared L2 cache controller support
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_HARDWARE_AURORA_L2_H
+#define __ASM_ARM_HARDWARE_AURORA_L2_H
+
+#define AURORA_SYNC_REG 0x700
+#define AURORA_RANGE_BASE_ADDR_REG 0x720
+#define AURORA_FLUSH_PHY_ADDR_REG 0x7f0
+#define AURORA_INVAL_RANGE_REG 0x774
+#define AURORA_CLEAN_RANGE_REG 0x7b4
+#define AURORA_FLUSH_RANGE_REG 0x7f4
+
+#define AURORA_ACR_REPLACEMENT_OFFSET 27
+#define AURORA_ACR_REPLACEMENT_MASK \
+ (0x3 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_WAYRR \
+ (0 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_LFSR \
+ (1 << AURORA_ACR_REPLACEMENT_OFFSET)
+#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \
+ (3 << AURORA_ACR_REPLACEMENT_OFFSET)
+
+#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0
+#define AURORA_ACR_FORCE_WRITE_POLICY_MASK \
+ (0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_POLICY_DIS \
+ (0 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_BACK_POLICY \
+ (1 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+#define AURORA_ACR_FORCE_WRITE_THRO_POLICY \
+ (2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
+
+#define MAX_RANGE_SIZE 1024
+
+#define AURORA_WAY_SIZE_SHIFT 2
+
+#define AURORA_CTRL_FW 0x100
+
+/* chose a number outside L2X0_CACHE_ID_PART_MASK to be sure to make
+ * the distinction between a number coming from hardware and a number
+ * coming from the device tree */
+#define AURORA_CACHE_ID 0x100
+
+#endif /* __ASM_ARM_HARDWARE_AURORA_L2_H */