net: phy: bcm7xxx: enable EEE at the PHY level
The 28nm Gigabit PHY on BCM7xxx chips comes out of reset with absolutely
no EEE capabilities, such that we would actually return that we do not
support EEE when accessing 3.20 (MDIO_PCS_EEE_ABLE) registers.
Poke through the vendor-specific C45 register to enable EEE globally at
the PHY level, and advertise supported EEE modes.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 29e256a..e98c510 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/brcmphy.h>
+#include <linux/mdio.h>
/* Broadcom BCM7xxx internal PHY registers */
#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
@@ -167,6 +168,32 @@
return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
}
+static int bcm7xxx_eee_enable(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+
+ /* Enable general EEE feature at the PHY level */
+ val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+ phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ /* Advertise supported modes */
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+
+ val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ return 0;
+}
+
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
int ret;
@@ -179,6 +206,10 @@
if (ret)
return ret;
+ ret = bcm7xxx_eee_enable(phydev);
+ if (ret)
+ return ret;
+
return bcm7xxx_apd_enable(phydev);
}
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 722cf26..ee1431d9 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -214,5 +214,8 @@
MII_BCM54XX_SHD_DATA(val));
}
+#define BRCM_CL45VEN_EEE_CONTROL 0x803d
+#define LPI_FEATURE_EN 0x8000
+#define LPI_FEATURE_EN_DIG1000X 0x4000
#endif /* _LINUX_BRCMPHY_H */