mn10300: add the MN10300/AM33 architecture to the kernel
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.
This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305. The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.
[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index f32e031..708c5ae 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -1,6 +1,4 @@
/*
- * $Id: analog.c,v 1.68 2002/01/22 20:18:32 vojtech Exp $
- *
* Copyright (c) 1996-2001 Vojtech Pavlik
*/
@@ -164,6 +162,10 @@
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "PCC"
+#elif defined(CONFIG_MN10300)
+#define GET_TIME(x) do { x = get_cycles(); } while (0)
+#define DELTA(x, y) ((x) - (y))
+#define TIME_NAME "TSC"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9cc25fd..50c2b60 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -879,7 +879,8 @@
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN
+ depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+ SOC_AU1X00 || BLACKFIN || MN10300
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 271c28d..51d4134 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -450,8 +450,20 @@
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
#define SMC_IRQ_FLAGS (-1) /* from resource */
+#elif defined(CONFIG_MN10300)
+
+/*
+ * MN10300/AM33 configuration
+ */
+
+#include <asm/unit/smc91111.h>
+
#else
+/*
+ * Default configuration
+ */
+
#define SMC_CAN_USE_8BIT 1
#define SMC_CAN_USE_16BIT 1
#define SMC_CAN_USE_32BIT 1
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index d449b15..b7bcdcc 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -35,7 +35,8 @@
config PARPORT_PC
tristate "PC-style hardware"
- depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && (!M68K || ISA)
+ depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
+ (!M68K || ISA) && !MN10300
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 9f04d17..4d1ce2e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_PPC) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
+obj-$(CONFIG_MN10300) += setup-bus.o
#
# ACPI Related PCI FW Functions
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 2b53d1f..06f87b0 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32 && !MN10300
default y
help
Saying Y here will allow you to use Linux in text mode through a