ixgbe: add support for x540 MAC
This patch adds support for the x540 MAC which is the next MAC in the
82598/82599 line.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index 7de5f7e..9649fa7 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -46,7 +46,7 @@
static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
-enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+static enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
{
return ixgbe_media_type_copper;
}
@@ -75,9 +75,9 @@
* @autoneg: true if autonegotiation enabled
* @autoneg_wait_to_complete: true when waiting for completion is needed
**/
-s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
+static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
{
return hw->phy.ops.setup_link_speed(hw, speed, autoneg,
autoneg_wait_to_complete);
@@ -91,7 +91,7 @@
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
* reset.
**/
-s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
{
ixgbe_link_speed link_speed;
s32 status = 0;
@@ -222,7 +222,7 @@
*
* Determines physical layer capabilities of the current configuration.
**/
-u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
+static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
{
u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
u16 ext_ability = 0;
@@ -245,7 +245,7 @@
* ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
* @hw: pointer to hardware structure
**/
-s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
{
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
u32 eec;
@@ -274,7 +274,7 @@
* @offset: offset of word in the EEPROM to read
* @data: word read from the EERPOM
**/
-s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
s32 status;
@@ -295,7 +295,7 @@
*
* Write a 16 bit word to the EEPROM using the EEWR register.
**/
-s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
{
u32 eewr;
s32 status;
@@ -406,7 +406,7 @@
* checksum and updates the EEPROM and instructs the hardware to update
* the flash.
**/
-s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
{
s32 status;