igb: Enable SCTP checksum offloading
Originally from: Vlad Yasevich <vladislav.yasevich@hp.com>
This patch, both the driver portion and the sctp code was
modified by Jesse Brandeburg and is
Copyright(c) 2009 Intel Corporation.
Thanks go to Vlad for starting this work.
Intel 82576 chipset supports SCTP checksum offloading. This
patch enables this functionality in the driver. A new NETIF
feature is introduced for SCTP checksum offload. If the driver
supports CRC32c checksum, it can set this feature flag. The
hardware can offload both transmit and receive.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index f7f8612..bca7e9f 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1345,6 +1345,9 @@
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
+ if (adapter->hw.mac.type == e1000_82576)
+ netdev->features |= NETIF_F_SCTP_CSUM;
+
adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
/* before reading the NVM, reset the controller to put the device in a
@@ -2249,6 +2252,10 @@
/* Don't need to set TUOFL or IPOFL, they default to 1 */
if (!adapter->rx_csum)
rxcsum &= ~(E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPOFL);
+ else if (adapter->hw.mac.type == e1000_82576)
+ /* Enable Receive Checksum Offload for SCTP */
+ rxcsum |= E1000_RXCSUM_CRCOFL;
+
wr32(E1000_RXCSUM, rxcsum);
/* Set the default pool for the PF's first queue */
@@ -3064,11 +3071,15 @@
tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
if (ip_hdr(skb)->protocol == IPPROTO_TCP)
tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
break;
case cpu_to_be16(ETH_P_IPV6):
/* XXX what about other V6 headers?? */
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
break;
default:
if (unlikely(net_ratelimit()))
@@ -4449,14 +4460,22 @@
/* TCP/UDP checksum error bit is set */
if (status_err &
(E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
+ /*
+ * work around errata with sctp packets where the TCPE aka
+ * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+ * packets, (aka let the stack check the crc32c)
+ */
+ if (!((adapter->hw.mac.type == e1000_82576) &&
+ (skb->len == 60)))
+ adapter->hw_csum_err++;
/* let the stack verify checksum errors */
- adapter->hw_csum_err++;
return;
}
/* It must be a TCP or UDP packet with a valid checksum */
if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
skb->ip_summed = CHECKSUM_UNNECESSARY;
+ dev_dbg(&adapter->pdev->dev, "cksum success: bits %08X\n", status_err);
adapter->hw_csum_good++;
}