[ARM] mv78xx0: implement GPIO and GPIO interrupt support
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d840a64..1f08b29 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -429,6 +429,7 @@
bool "Marvell MV78xx0"
select CPU_FEROCEON
select PCI
+ select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
diff --git a/arch/arm/mach-mv78xx0/include/mach/gpio.h b/arch/arm/mach-mv78xx0/include/mach/gpio.h
new file mode 100644
index 0000000..d9d1535
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/gpio.h
@@ -0,0 +1,40 @@
+/*
+ * arch/asm-arm/mach-mv78xx0/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+extern int mv78xx0_core_index(void);
+
+#define GPIO_MAX 32
+#define GPIO_OUT(pin) (DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_IO_CONF(pin) (DEV_BUS_VIRT_BASE + 0x0104)
+#define GPIO_BLINK_EN(pin) (DEV_BUS_VIRT_BASE + 0x0108)
+#define GPIO_IN_POL(pin) (DEV_BUS_VIRT_BASE + 0x010c)
+#define GPIO_DATA_IN(pin) (DEV_BUS_VIRT_BASE + 0x0110)
+#define GPIO_EDGE_CAUSE(pin) (DEV_BUS_VIRT_BASE + 0x0114)
+#define GPIO_MASK_OFF (mv78xx0_core_index() ? 0x18 : 0)
+#define GPIO_EDGE_MASK(pin) (DEV_BUS_VIRT_BASE + 0x0118 + GPIO_MASK_OFF)
+#define GPIO_LEVEL_MASK(pin) (DEV_BUS_VIRT_BASE + 0x011c + GPIO_MASK_OFF)
+
+static inline int gpio_to_irq(int pin)
+{
+ return pin + IRQ_MV78XX0_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+ return irq - IRQ_MV78XX0_GPIO_START;
+}
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
index bebc330..fa1d422 100644
--- a/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -11,8 +11,6 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include "mv78xx0.h" /* need GPIO_MAX */
-
/*
* MV78xx0 Low Interrupt Controller
*/
@@ -88,7 +86,7 @@
* MV78XX0 General Purpose Pins
*/
#define IRQ_MV78XX0_GPIO_START 96
-#define NR_GPIO_IRQS GPIO_MAX
+#define NR_GPIO_IRQS 32
#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index ee9c559..e930ea5 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -122,7 +122,4 @@
#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
-#define GPIO_MAX 32
-
-
#endif
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 503e5d1..e273418 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,13 +11,42 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/gpio.h>
#include <mach/mv78xx0.h>
#include <plat/irq.h>
#include "common.h"
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31);
+
+ orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3);
+}
+
void __init mv78xx0_init_irq(void)
{
+ int i;
+
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+
+ /*
+ * Mask and clear GPIO IRQ interrupts.
+ */
+ writel(0, GPIO_LEVEL_MASK(0));
+ writel(0, GPIO_EDGE_MASK(0));
+ writel(0, GPIO_EDGE_CAUSE(0));
+
+ for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
+ set_irq_chip(i, &orion_gpio_irq_level_chip);
+ set_irq_handler(i, handle_level_irq);
+ irq_desc[i].status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler);
}