kernel/watchdog.c: move hardlockup detector to separate file
[ Upstream commit 73ce0511c43686095efd2f65ef564aab952e07bc ]
Separate hardlockup code from watchdog.c and move it to watchdog_hld.c.
It is mostly straight forward. Remove everything inside
CONFIG_HARDLOCKUP_DETECTORS. This code will go to file watchdog_hld.c.
Also update the makefile accordigly.
Link: http://lkml.kernel.org/r/1478034826-43888-3-git-send-email-babu.moger@oracle.com
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Josh Hunt <johunt@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c
new file mode 100644
index 0000000..84016c8
--- /dev/null
+++ b/kernel/watchdog_hld.c
@@ -0,0 +1,227 @@
+/*
+ * Detect hard lockups on a system
+ *
+ * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
+ *
+ * Note: Most of this code is borrowed heavily from the original softlockup
+ * detector, so thanks to Ingo for the initial implementation.
+ * Some chunks also taken from the old x86-specific nmi watchdog code, thanks
+ * to those contributors as well.
+ */
+
+#define pr_fmt(fmt) "NMI watchdog: " fmt
+
+#include <linux/nmi.h>
+#include <linux/module.h>
+#include <asm/irq_regs.h>
+#include <linux/perf_event.h>
+
+static DEFINE_PER_CPU(bool, hard_watchdog_warn);
+static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
+static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
+
+/* boot commands */
+/*
+ * Should we panic when a soft-lockup or hard-lockup occurs:
+ */
+unsigned int __read_mostly hardlockup_panic =
+ CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
+static unsigned long hardlockup_allcpu_dumped;
+/*
+ * We may not want to enable hard lockup detection by default in all cases,
+ * for example when running the kernel as a guest on a hypervisor. In these
+ * cases this function can be called to disable hard lockup detection. This
+ * function should only be executed once by the boot processor before the
+ * kernel command line parameters are parsed, because otherwise it is not
+ * possible to override this in hardlockup_panic_setup().
+ */
+void hardlockup_detector_disable(void)
+{
+ watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+}
+
+static int __init hardlockup_panic_setup(char *str)
+{
+ if (!strncmp(str, "panic", 5))
+ hardlockup_panic = 1;
+ else if (!strncmp(str, "nopanic", 7))
+ hardlockup_panic = 0;
+ else if (!strncmp(str, "0", 1))
+ watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+ else if (!strncmp(str, "1", 1))
+ watchdog_enabled |= NMI_WATCHDOG_ENABLED;
+ return 1;
+}
+__setup("nmi_watchdog=", hardlockup_panic_setup);
+
+void touch_nmi_watchdog(void)
+{
+ /*
+ * Using __raw here because some code paths have
+ * preemption enabled. If preemption is enabled
+ * then interrupts should be enabled too, in which
+ * case we shouldn't have to worry about the watchdog
+ * going off.
+ */
+ raw_cpu_write(watchdog_nmi_touch, true);
+ touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+static struct perf_event_attr wd_hw_attr = {
+ .type = PERF_TYPE_HARDWARE,
+ .config = PERF_COUNT_HW_CPU_CYCLES,
+ .size = sizeof(struct perf_event_attr),
+ .pinned = 1,
+ .disabled = 1,
+};
+
+/* Callback function for perf event subsystem */
+static void watchdog_overflow_callback(struct perf_event *event,
+ struct perf_sample_data *data,
+ struct pt_regs *regs)
+{
+ /* Ensure the watchdog never gets throttled */
+ event->hw.interrupts = 0;
+
+ if (__this_cpu_read(watchdog_nmi_touch) == true) {
+ __this_cpu_write(watchdog_nmi_touch, false);
+ return;
+ }
+
+ /* check for a hardlockup
+ * This is done by making sure our timer interrupt
+ * is incrementing. The timer interrupt should have
+ * fired multiple times before we overflow'd. If it hasn't
+ * then this is a good indication the cpu is stuck
+ */
+ if (is_hardlockup()) {
+ int this_cpu = smp_processor_id();
+
+ /* only print hardlockups once */
+ if (__this_cpu_read(hard_watchdog_warn) == true)
+ return;
+
+ pr_emerg("Watchdog detected hard LOCKUP on cpu %d", this_cpu);
+ print_modules();
+ print_irqtrace_events(current);
+ if (regs)
+ show_regs(regs);
+ else
+ dump_stack();
+
+ /*
+ * Perform all-CPU dump only once to avoid multiple hardlockups
+ * generating interleaving traces
+ */
+ if (sysctl_hardlockup_all_cpu_backtrace &&
+ !test_and_set_bit(0, &hardlockup_allcpu_dumped))
+ trigger_allbutself_cpu_backtrace();
+
+ if (hardlockup_panic)
+ nmi_panic(regs, "Hard LOCKUP");
+
+ __this_cpu_write(hard_watchdog_warn, true);
+ return;
+ }
+
+ __this_cpu_write(hard_watchdog_warn, false);
+ return;
+}
+
+/*
+ * People like the simple clean cpu node info on boot.
+ * Reduce the watchdog noise by only printing messages
+ * that are different from what cpu0 displayed.
+ */
+static unsigned long cpu0_err;
+
+int watchdog_nmi_enable(unsigned int cpu)
+{
+ struct perf_event_attr *wd_attr;
+ struct perf_event *event = per_cpu(watchdog_ev, cpu);
+
+ /* nothing to do if the hard lockup detector is disabled */
+ if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
+ goto out;
+
+ /* is it already setup and enabled? */
+ if (event && event->state > PERF_EVENT_STATE_OFF)
+ goto out;
+
+ /* it is setup but not enabled */
+ if (event != NULL)
+ goto out_enable;
+
+ wd_attr = &wd_hw_attr;
+ wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh);
+
+ /* Try to register using hardware perf events */
+ event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
+
+ /* save cpu0 error for future comparision */
+ if (cpu == 0 && IS_ERR(event))
+ cpu0_err = PTR_ERR(event);
+
+ if (!IS_ERR(event)) {
+ /* only print for cpu0 or different than cpu0 */
+ if (cpu == 0 || cpu0_err)
+ pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
+ goto out_save;
+ }
+
+ /*
+ * Disable the hard lockup detector if _any_ CPU fails to set up
+ * set up the hardware perf event. The watchdog() function checks
+ * the NMI_WATCHDOG_ENABLED bit periodically.
+ *
+ * The barriers are for syncing up watchdog_enabled across all the
+ * cpus, as clear_bit() does not use barriers.
+ */
+ smp_mb__before_atomic();
+ clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled);
+ smp_mb__after_atomic();
+
+ /* skip displaying the same error again */
+ if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
+ return PTR_ERR(event);
+
+ /* vary the KERN level based on the returned errno */
+ if (PTR_ERR(event) == -EOPNOTSUPP)
+ pr_info("disabled (cpu%i): not supported (no LAPIC?)\n", cpu);
+ else if (PTR_ERR(event) == -ENOENT)
+ pr_warn("disabled (cpu%i): hardware events not enabled\n",
+ cpu);
+ else
+ pr_err("disabled (cpu%i): unable to create perf event: %ld\n",
+ cpu, PTR_ERR(event));
+
+ pr_info("Shutting down hard lockup detector on all cpus\n");
+
+ return PTR_ERR(event);
+
+ /* success path */
+out_save:
+ per_cpu(watchdog_ev, cpu) = event;
+out_enable:
+ perf_event_enable(per_cpu(watchdog_ev, cpu));
+out:
+ return 0;
+}
+
+void watchdog_nmi_disable(unsigned int cpu)
+{
+ struct perf_event *event = per_cpu(watchdog_ev, cpu);
+
+ if (event) {
+ perf_event_disable(event);
+ per_cpu(watchdog_ev, cpu) = NULL;
+
+ /* should be in cleanup, but blocks oprofile */
+ perf_event_release_kernel(event);
+ }
+ if (cpu == 0) {
+ /* watchdog_nmi_enable() expects this to be zero initially. */
+ cpu0_err = 0;
+ }
+}