ARM: KVM: Remove the old world switch
As we now have a full reimplementation of the world switch, it is
time to kiss the old stuff goodbye. I'm not sure we'll miss it.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S
index 01eb169..b1bd316 100644
--- a/arch/arm/kvm/interrupts.S
+++ b/arch/arm/kvm/interrupts.S
@@ -17,198 +17,8 @@
*/
#include <linux/linkage.h>
-#include <linux/const.h>
-#include <asm/unified.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-#include <asm/kvm_asm.h>
-#include <asm/kvm_arm.h>
-#include <asm/vfpmacros.h>
-#include "interrupts_head.S"
.text
- .pushsection .hyp.text, "ax"
-
-/********************************************************************
- * Flush per-VMID TLBs
- *
- * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
- *
- * We rely on the hardware to broadcast the TLB invalidation to all CPUs
- * inside the inner-shareable domain (which is the case for all v7
- * implementations). If we come across a non-IS SMP implementation, we'll
- * have to use an IPI based mechanism. Until then, we stick to the simple
- * hardware assisted version.
- *
- * As v7 does not support flushing per IPA, just nuke the whole TLB
- * instead, ignoring the ipa value.
- */
-ENTRY(__kvm_tlb_flush_vmid_ipa)
- push {r2, r3}
-
- dsb ishst
- add r0, r0, #KVM_VTTBR
- ldrd r2, r3, [r0]
- mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR
- isb
- mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored)
- dsb ish
- isb
- mov r2, #0
- mov r3, #0
- mcrr p15, 6, r2, r3, c2 @ Back to VMID #0
- isb @ Not necessary if followed by eret
-
- pop {r2, r3}
- bx lr
-ENDPROC(__kvm_tlb_flush_vmid_ipa)
-
-/**
- * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs
- *
- * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address
- * parameter
- */
-
-ENTRY(__kvm_tlb_flush_vmid)
- b __kvm_tlb_flush_vmid_ipa
-ENDPROC(__kvm_tlb_flush_vmid)
-
-/********************************************************************
- * Flush TLBs and instruction caches of all CPUs inside the inner-shareable
- * domain, for all VMIDs
- *
- * void __kvm_flush_vm_context(void);
- */
-ENTRY(__kvm_flush_vm_context)
- mov r0, #0 @ rn parameter for c15 flushes is SBZ
-
- /* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */
- mcr p15, 4, r0, c8, c3, 4
- /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */
- mcr p15, 0, r0, c7, c1, 0
- dsb ish
- isb @ Not necessary if followed by eret
-
- bx lr
-ENDPROC(__kvm_flush_vm_context)
-
-
-/********************************************************************
- * Hypervisor world-switch code
- *
- *
- * int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
- */
-ENTRY(__kvm_vcpu_run)
- @ Save the vcpu pointer
- mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR
-
- save_host_regs
-
- restore_vgic_state
- restore_timer_state
-
- @ Store hardware CP15 state and load guest state
- read_cp15_state store_to_vcpu = 0
- write_cp15_state read_from_vcpu = 1
-
- @ If the host kernel has not been configured with VFPv3 support,
- @ then it is safer if we deny guests from using it as well.
-#ifdef CONFIG_VFPv3
- @ Set FPEXC_EN so the guest doesn't trap floating point instructions
- VFPFMRX r2, FPEXC @ VMRS
- push {r2}
- orr r2, r2, #FPEXC_EN
- VFPFMXR FPEXC, r2 @ VMSR
-#endif
-
- @ Configure Hyp-role
- configure_hyp_role vmentry
-
- @ Trap coprocessor CRx accesses
- set_hstr vmentry
- set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
- set_hdcr vmentry
-
- @ Write configured ID register into MIDR alias
- ldr r1, [vcpu, #VCPU_MIDR]
- mcr p15, 4, r1, c0, c0, 0
-
- @ Write guest view of MPIDR into VMPIDR
- ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)]
- mcr p15, 4, r1, c0, c0, 5
-
- @ Set up guest memory translation
- ldr r1, [vcpu, #VCPU_KVM]
- add r1, r1, #KVM_VTTBR
- ldrd r2, r3, [r1]
- mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR
-
- @ We're all done, just restore the GPRs and go to the guest
- restore_guest_regs
- clrex @ Clear exclusive monitor
- eret
-
-__kvm_vcpu_return:
- /*
- * return convention:
- * guest r0, r1, r2 saved on the stack
- * r0: vcpu pointer
- * r1: exception code
- */
- save_guest_regs
-
- @ Set VMID == 0
- mov r2, #0
- mov r3, #0
- mcrr p15, 6, r2, r3, c2 @ Write VTTBR
-
- @ Don't trap coprocessor accesses for host kernel
- set_hstr vmexit
- set_hdcr vmexit
- set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore
-
-#ifdef CONFIG_VFPv3
- @ Switch VFP/NEON hardware state to the host's
- add r7, vcpu, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP)
- store_vfp_state r7
- add r7, vcpu, #VCPU_HOST_CTXT
- ldr r7, [r7]
- add r7, r7, #CPU_CTXT_VFP
- restore_vfp_state r7
-
-after_vfp_restore:
- @ Restore FPEXC_EN which we clobbered on entry
- pop {r2}
- VFPFMXR FPEXC, r2
-#else
-after_vfp_restore:
-#endif
-
- @ Reset Hyp-role
- configure_hyp_role vmexit
-
- @ Let host read hardware MIDR
- mrc p15, 0, r2, c0, c0, 0
- mcr p15, 4, r2, c0, c0, 0
-
- @ Back to hardware MPIDR
- mrc p15, 0, r2, c0, c0, 5
- mcr p15, 4, r2, c0, c0, 5
-
- @ Store guest CP15 state and restore host state
- read_cp15_state store_to_vcpu = 1
- write_cp15_state read_from_vcpu = 0
-
- save_timer_state
- save_vgic_state
-
- restore_host_regs
- clrex @ Clear exclusive monitor
- mov r0, r1 @ Return the return code
- bx lr @ return to IOCTL
/********************************************************************
* Call function in Hyp mode
@@ -239,281 +49,4 @@
ENTRY(kvm_call_hyp)
hvc #0
bx lr
-
-/********************************************************************
- * Hypervisor exception vector and handlers
- *
- *
- * The KVM/ARM Hypervisor ABI is defined as follows:
- *
- * Entry to Hyp mode from the host kernel will happen _only_ when an HVC
- * instruction is issued since all traps are disabled when running the host
- * kernel as per the Hyp-mode initialization at boot time.
- *
- * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc
- * below) when the HVC instruction is called from SVC mode (i.e. a guest or the
- * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC
- * instructions are called from within Hyp-mode.
- *
- * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
- * Switching to Hyp mode is done through a simple HVC #0 instruction. The
- * exception vector code will check that the HVC comes from VMID==0 and if
- * so will push the necessary state (SPSR, lr_usr) on the Hyp stack.
- * - r0 contains a pointer to a HYP function
- * - r1, r2, and r3 contain arguments to the above function.
- * - The HYP function will be called with its arguments in r0, r1 and r2.
- * On HYP function return, we return directly to SVC.
- *
- * Note that the above is used to execute code in Hyp-mode from a host-kernel
- * point of view, and is a different concept from performing a world-switch and
- * executing guest code SVC mode (with a VMID != 0).
- */
-
-/* Handle undef, svc, pabt, or dabt by crashing with a user notice */
-.macro bad_exception exception_code, panic_str
- push {r0-r2}
- mrrc p15, 6, r0, r1, c2 @ Read VTTBR
- lsr r1, r1, #16
- ands r1, r1, #0xff
- beq 99f
-
- load_vcpu @ Load VCPU pointer
- .if \exception_code == ARM_EXCEPTION_DATA_ABORT
- mrc p15, 4, r2, c5, c2, 0 @ HSR
- mrc p15, 4, r1, c6, c0, 0 @ HDFAR
- str r2, [vcpu, #VCPU_HSR]
- str r1, [vcpu, #VCPU_HxFAR]
- .endif
- .if \exception_code == ARM_EXCEPTION_PREF_ABORT
- mrc p15, 4, r2, c5, c2, 0 @ HSR
- mrc p15, 4, r1, c6, c0, 2 @ HIFAR
- str r2, [vcpu, #VCPU_HSR]
- str r1, [vcpu, #VCPU_HxFAR]
- .endif
- mov r1, #\exception_code
- b __kvm_vcpu_return
-
- @ We were in the host already. Let's craft a panic-ing return to SVC.
-99: mrs r2, cpsr
- bic r2, r2, #MODE_MASK
- orr r2, r2, #SVC_MODE
-THUMB( orr r2, r2, #PSR_T_BIT )
- msr spsr_cxsf, r2
- mrs r1, ELR_hyp
- ldr r2, =panic
- msr ELR_hyp, r2
- ldr r0, =\panic_str
- clrex @ Clear exclusive monitor
- eret
-.endm
-
- .align 5
-__kvm_hyp_vector:
- .globl __kvm_hyp_vector
-
- @ Hyp-mode exception vector
- W(b) hyp_reset
- W(b) hyp_undef
- W(b) hyp_svc
- W(b) hyp_pabt
- W(b) hyp_dabt
- W(b) hyp_hvc
- W(b) hyp_irq
- W(b) hyp_fiq
-
- .align
-hyp_reset:
- b hyp_reset
-
- .align
-hyp_undef:
- bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str
-
- .align
-hyp_svc:
- bad_exception ARM_EXCEPTION_HVC, svc_die_str
-
- .align
-hyp_pabt:
- bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str
-
- .align
-hyp_dabt:
- bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str
-
- .align
-hyp_hvc:
- /*
- * Getting here is either becuase of a trap from a guest or from calling
- * HVC from the host kernel, which means "switch to Hyp mode".
- */
- push {r0, r1, r2}
-
- @ Check syndrome register
- mrc p15, 4, r1, c5, c2, 0 @ HSR
- lsr r0, r1, #HSR_EC_SHIFT
- cmp r0, #HSR_EC_HVC
- bne guest_trap @ Not HVC instr.
-
- /*
- * Let's check if the HVC came from VMID 0 and allow simple
- * switch to Hyp mode
- */
- mrrc p15, 6, r0, r2, c2
- lsr r2, r2, #16
- and r2, r2, #0xff
- cmp r2, #0
- bne guest_trap @ Guest called HVC
-
- /*
- * Getting here means host called HVC, we shift parameters and branch
- * to Hyp function.
- */
- pop {r0, r1, r2}
-
- /* Check for __hyp_get_vectors */
- cmp r0, #-1
- mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
- beq 1f
-
- push {lr}
- mrs lr, SPSR
- push {lr}
-
- mov lr, r0
- mov r0, r1
- mov r1, r2
- mov r2, r3
-
-THUMB( orr lr, #1)
- blx lr @ Call the HYP function
-
- pop {lr}
- msr SPSR_csxf, lr
- pop {lr}
-1: eret
-
-guest_trap:
- load_vcpu @ Load VCPU pointer to r0
- str r1, [vcpu, #VCPU_HSR]
-
- @ Check if we need the fault information
- lsr r1, r1, #HSR_EC_SHIFT
-#ifdef CONFIG_VFPv3
- cmp r1, #HSR_EC_CP_0_13
- beq switch_to_guest_vfp
-#endif
- cmp r1, #HSR_EC_IABT
- mrceq p15, 4, r2, c6, c0, 2 @ HIFAR
- beq 2f
- cmp r1, #HSR_EC_DABT
- bne 1f
- mrc p15, 4, r2, c6, c0, 0 @ HDFAR
-
-2: str r2, [vcpu, #VCPU_HxFAR]
-
- /*
- * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode:
- *
- * Abort on the stage 2 translation for a memory access from a
- * Non-secure PL1 or PL0 mode:
- *
- * For any Access flag fault or Translation fault, and also for any
- * Permission fault on the stage 2 translation of a memory access
- * made as part of a translation table walk for a stage 1 translation,
- * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR
- * is UNKNOWN.
- */
-
- /* Check for permission fault, and S1PTW */
- mrc p15, 4, r1, c5, c2, 0 @ HSR
- and r0, r1, #HSR_FSC_TYPE
- cmp r0, #FSC_PERM
- tsteq r1, #(1 << 7) @ S1PTW
- mrcne p15, 4, r2, c6, c0, 4 @ HPFAR
- bne 3f
-
- /* Preserve PAR */
- mrrc p15, 0, r0, r1, c7 @ PAR
- push {r0, r1}
-
- /* Resolve IPA using the xFAR */
- mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR
- isb
- mrrc p15, 0, r0, r1, c7 @ PAR
- tst r0, #1
- bne 4f @ Failed translation
- ubfx r2, r0, #12, #20
- lsl r2, r2, #4
- orr r2, r2, r1, lsl #24
-
- /* Restore PAR */
- pop {r0, r1}
- mcrr p15, 0, r0, r1, c7 @ PAR
-
-3: load_vcpu @ Load VCPU pointer to r0
- str r2, [r0, #VCPU_HPFAR]
-
-1: mov r1, #ARM_EXCEPTION_HVC
- b __kvm_vcpu_return
-
-4: pop {r0, r1} @ Failed translation, return to guest
- mcrr p15, 0, r0, r1, c7 @ PAR
- clrex
- pop {r0, r1, r2}
- eret
-
-/*
- * If VFPv3 support is not available, then we will not switch the VFP
- * registers; however cp10 and cp11 accesses will still trap and fallback
- * to the regular coprocessor emulation code, which currently will
- * inject an undefined exception to the guest.
- */
-#ifdef CONFIG_VFPv3
-switch_to_guest_vfp:
- push {r3-r7}
-
- @ NEON/VFP used. Turn on VFP access.
- set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11))
-
- @ Switch VFP/NEON hardware state to the guest's
- add r7, r0, #VCPU_HOST_CTXT
- ldr r7, [r7]
- add r7, r7, #CPU_CTXT_VFP
- store_vfp_state r7
- add r7, r0, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP)
- restore_vfp_state r7
-
- pop {r3-r7}
- pop {r0-r2}
- clrex
- eret
-#endif
-
- .align
-hyp_irq:
- push {r0, r1, r2}
- mov r1, #ARM_EXCEPTION_IRQ
- load_vcpu @ Load VCPU pointer to r0
- b __kvm_vcpu_return
-
- .align
-hyp_fiq:
- b hyp_fiq
-
- .ltorg
-
- .popsection
-
- .pushsection ".rodata"
-
-und_die_str:
- .ascii "unexpected undefined exception in Hyp mode at: %#08x\n"
-pabt_die_str:
- .ascii "unexpected prefetch abort in Hyp mode at: %#08x\n"
-dabt_die_str:
- .ascii "unexpected data abort in Hyp mode at: %#08x\n"
-svc_die_str:
- .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n"
-
- .popsection
+ENDPROC(kvm_call_hyp)
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
deleted file mode 100644
index e0943cb..0000000
--- a/arch/arm/kvm/interrupts_head.S
+++ /dev/null
@@ -1,660 +0,0 @@
-#include <linux/irqchip/arm-gic.h>
-#include <asm/assembler.h>
-
-/* Compat macro, until we get rid of this file entierely */
-#define VCPU_GP_REGS (VCPU_GUEST_CTXT + CPU_CTXT_GP_REGS)
-#define VCPU_USR_REGS (VCPU_GP_REGS + GP_REGS_USR)
-#define VCPU_SVC_REGS (VCPU_GP_REGS + GP_REGS_SVC)
-#define VCPU_ABT_REGS (VCPU_GP_REGS + GP_REGS_ABT)
-#define VCPU_UND_REGS (VCPU_GP_REGS + GP_REGS_UND)
-#define VCPU_IRQ_REGS (VCPU_GP_REGS + GP_REGS_IRQ)
-#define VCPU_FIQ_REGS (VCPU_GP_REGS + GP_REGS_FIQ)
-#define VCPU_PC (VCPU_GP_REGS + GP_REGS_PC)
-#define VCPU_CPSR (VCPU_GP_REGS + GP_REGS_CPSR)
-
-#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4))
-#define VCPU_USR_SP (VCPU_USR_REG(13))
-#define VCPU_USR_LR (VCPU_USR_REG(14))
-#define VCPU_CP15_BASE (VCPU_GUEST_CTXT + CPU_CTXT_CP15)
-#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15_BASE + (_cp15_reg_idx * 4))
-
-/*
- * Many of these macros need to access the VCPU structure, which is always
- * held in r0. These macros should never clobber r1, as it is used to hold the
- * exception code on the return path (except of course the macro that switches
- * all the registers before the final jump to the VM).
- */
-vcpu .req r0 @ vcpu pointer always in r0
-
-/* Clobbers {r2-r6} */
-.macro store_vfp_state vfp_base
- @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions
- VFPFMRX r2, FPEXC
- @ Make sure VFP is enabled so we can touch the registers.
- orr r6, r2, #FPEXC_EN
- VFPFMXR FPEXC, r6
-
- VFPFMRX r3, FPSCR
- tst r2, #FPEXC_EX @ Check for VFP Subarchitecture
- beq 1f
- @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
- @ we only need to save them if FPEXC_EX is set.
- VFPFMRX r4, FPINST
- tst r2, #FPEXC_FP2V
- VFPFMRX r5, FPINST2, ne @ vmrsne
- bic r6, r2, #FPEXC_EX @ FPEXC_EX disable
- VFPFMXR FPEXC, r6
-1:
- VFPFSTMIA \vfp_base, r6 @ Save VFP registers
- stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2
-.endm
-
-/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */
-.macro restore_vfp_state vfp_base
- VFPFLDMIA \vfp_base, r6 @ Load VFP registers
- ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2
-
- VFPFMXR FPSCR, r3
- tst r2, #FPEXC_EX @ Check for VFP Subarchitecture
- beq 1f
- VFPFMXR FPINST, r4
- tst r2, #FPEXC_FP2V
- VFPFMXR FPINST2, r5, ne
-1:
- VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN)
-.endm
-
-/* These are simply for the macros to work - value don't have meaning */
-.equ usr, 0
-.equ svc, 1
-.equ abt, 2
-.equ und, 3
-.equ irq, 4
-.equ fiq, 5
-
-.macro push_host_regs_mode mode
- mrs r2, SP_\mode
- mrs r3, LR_\mode
- mrs r4, SPSR_\mode
- push {r2, r3, r4}
-.endm
-
-/*
- * Store all host persistent registers on the stack.
- * Clobbers all registers, in all modes, except r0 and r1.
- */
-.macro save_host_regs
- /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */
- mrs r2, ELR_hyp
- push {r2}
-
- /* usr regs */
- push {r4-r12} @ r0-r3 are always clobbered
- mrs r2, SP_usr
- mov r3, lr
- push {r2, r3}
-
- push_host_regs_mode svc
- push_host_regs_mode abt
- push_host_regs_mode und
- push_host_regs_mode irq
-
- /* fiq regs */
- mrs r2, r8_fiq
- mrs r3, r9_fiq
- mrs r4, r10_fiq
- mrs r5, r11_fiq
- mrs r6, r12_fiq
- mrs r7, SP_fiq
- mrs r8, LR_fiq
- mrs r9, SPSR_fiq
- push {r2-r9}
-.endm
-
-.macro pop_host_regs_mode mode
- pop {r2, r3, r4}
- msr SP_\mode, r2
- msr LR_\mode, r3
- msr SPSR_\mode, r4
-.endm
-
-/*
- * Restore all host registers from the stack.
- * Clobbers all registers, in all modes, except r0 and r1.
- */
-.macro restore_host_regs
- pop {r2-r9}
- msr r8_fiq, r2
- msr r9_fiq, r3
- msr r10_fiq, r4
- msr r11_fiq, r5
- msr r12_fiq, r6
- msr SP_fiq, r7
- msr LR_fiq, r8
- msr SPSR_fiq, r9
-
- pop_host_regs_mode irq
- pop_host_regs_mode und
- pop_host_regs_mode abt
- pop_host_regs_mode svc
-
- pop {r2, r3}
- msr SP_usr, r2
- mov lr, r3
- pop {r4-r12}
-
- pop {r2}
- msr ELR_hyp, r2
-.endm
-
-/*
- * Restore SP, LR and SPSR for a given mode. offset is the offset of
- * this mode's registers from the VCPU base.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r1, r2, r3, r4.
- */
-.macro restore_guest_regs_mode mode, offset
- add r1, vcpu, \offset
- ldm r1, {r2, r3, r4}
- msr SP_\mode, r2
- msr LR_\mode, r3
- msr SPSR_\mode, r4
-.endm
-
-/*
- * Restore all guest registers from the vcpu struct.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers *all* registers.
- */
-.macro restore_guest_regs
- restore_guest_regs_mode svc, #VCPU_SVC_REGS
- restore_guest_regs_mode abt, #VCPU_ABT_REGS
- restore_guest_regs_mode und, #VCPU_UND_REGS
- restore_guest_regs_mode irq, #VCPU_IRQ_REGS
-
- add r1, vcpu, #VCPU_FIQ_REGS
- ldm r1, {r2-r9}
- msr r8_fiq, r2
- msr r9_fiq, r3
- msr r10_fiq, r4
- msr r11_fiq, r5
- msr r12_fiq, r6
- msr SP_fiq, r7
- msr LR_fiq, r8
- msr SPSR_fiq, r9
-
- @ Load return state
- ldr r2, [vcpu, #VCPU_PC]
- ldr r3, [vcpu, #VCPU_CPSR]
- msr ELR_hyp, r2
- msr SPSR_cxsf, r3
-
- @ Load user registers
- ldr r2, [vcpu, #VCPU_USR_SP]
- ldr r3, [vcpu, #VCPU_USR_LR]
- msr SP_usr, r2
- mov lr, r3
- add vcpu, vcpu, #(VCPU_USR_REGS)
- ldm vcpu, {r0-r12}
-.endm
-
-/*
- * Save SP, LR and SPSR for a given mode. offset is the offset of
- * this mode's registers from the VCPU base.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2, r3, r4, r5.
- */
-.macro save_guest_regs_mode mode, offset
- add r2, vcpu, \offset
- mrs r3, SP_\mode
- mrs r4, LR_\mode
- mrs r5, SPSR_\mode
- stm r2, {r3, r4, r5}
-.endm
-
-/*
- * Save all guest registers to the vcpu struct
- * Expects guest's r0, r1, r2 on the stack.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2, r3, r4, r5.
- */
-.macro save_guest_regs
- @ Store usr registers
- add r2, vcpu, #VCPU_USR_REG(3)
- stm r2, {r3-r12}
- add r2, vcpu, #VCPU_USR_REG(0)
- pop {r3, r4, r5} @ r0, r1, r2
- stm r2, {r3, r4, r5}
- mrs r2, SP_usr
- mov r3, lr
- str r2, [vcpu, #VCPU_USR_SP]
- str r3, [vcpu, #VCPU_USR_LR]
-
- @ Store return state
- mrs r2, ELR_hyp
- mrs r3, spsr
- str r2, [vcpu, #VCPU_PC]
- str r3, [vcpu, #VCPU_CPSR]
-
- @ Store other guest registers
- save_guest_regs_mode svc, #VCPU_SVC_REGS
- save_guest_regs_mode abt, #VCPU_ABT_REGS
- save_guest_regs_mode und, #VCPU_UND_REGS
- save_guest_regs_mode irq, #VCPU_IRQ_REGS
-.endm
-
-/* Reads cp15 registers from hardware and stores them in memory
- * @store_to_vcpu: If 0, registers are written in-order to the stack,
- * otherwise to the VCPU struct pointed to by vcpup
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2 - r12
- */
-.macro read_cp15_state store_to_vcpu
- mrc p15, 0, r2, c1, c0, 0 @ SCTLR
- mrc p15, 0, r3, c1, c0, 2 @ CPACR
- mrc p15, 0, r4, c2, c0, 2 @ TTBCR
- mrc p15, 0, r5, c3, c0, 0 @ DACR
- mrrc p15, 0, r6, r7, c2 @ TTBR 0
- mrrc p15, 1, r8, r9, c2 @ TTBR 1
- mrc p15, 0, r10, c10, c2, 0 @ PRRR
- mrc p15, 0, r11, c10, c2, 1 @ NMRR
- mrc p15, 2, r12, c0, c0, 0 @ CSSELR
-
- .if \store_to_vcpu == 0
- push {r2-r12} @ Push CP15 registers
- .else
- str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
- str r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
- str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
- str r5, [vcpu, #CP15_OFFSET(c3_DACR)]
- add r2, vcpu, #CP15_OFFSET(c2_TTBR0)
- strd r6, r7, [r2]
- add r2, vcpu, #CP15_OFFSET(c2_TTBR1)
- strd r8, r9, [r2]
- str r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
- str r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
- str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
- .endif
-
- mrc p15, 0, r2, c13, c0, 1 @ CID
- mrc p15, 0, r3, c13, c0, 2 @ TID_URW
- mrc p15, 0, r4, c13, c0, 3 @ TID_URO
- mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV
- mrc p15, 0, r6, c5, c0, 0 @ DFSR
- mrc p15, 0, r7, c5, c0, 1 @ IFSR
- mrc p15, 0, r8, c5, c1, 0 @ ADFSR
- mrc p15, 0, r9, c5, c1, 1 @ AIFSR
- mrc p15, 0, r10, c6, c0, 0 @ DFAR
- mrc p15, 0, r11, c6, c0, 2 @ IFAR
- mrc p15, 0, r12, c12, c0, 0 @ VBAR
-
- .if \store_to_vcpu == 0
- push {r2-r12} @ Push CP15 registers
- .else
- str r2, [vcpu, #CP15_OFFSET(c13_CID)]
- str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
- str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
- str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
- str r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
- str r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
- str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
- str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
- str r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
- str r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
- str r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
- .endif
-
- mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL
- mrrc p15, 0, r4, r5, c7 @ PAR
- mrc p15, 0, r6, c10, c3, 0 @ AMAIR0
- mrc p15, 0, r7, c10, c3, 1 @ AMAIR1
-
- .if \store_to_vcpu == 0
- push {r2,r4-r7}
- .else
- str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
- add r12, vcpu, #CP15_OFFSET(c7_PAR)
- strd r4, r5, [r12]
- str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
- str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
- .endif
-.endm
-
-/*
- * Reads cp15 registers from memory and writes them to hardware
- * @read_from_vcpu: If 0, registers are read in-order from the stack,
- * otherwise from the VCPU struct pointed to by vcpup
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro write_cp15_state read_from_vcpu
- .if \read_from_vcpu == 0
- pop {r2,r4-r7}
- .else
- ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
- add r12, vcpu, #CP15_OFFSET(c7_PAR)
- ldrd r4, r5, [r12]
- ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
- ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
- .endif
-
- mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL
- mcrr p15, 0, r4, r5, c7 @ PAR
- mcr p15, 0, r6, c10, c3, 0 @ AMAIR0
- mcr p15, 0, r7, c10, c3, 1 @ AMAIR1
-
- .if \read_from_vcpu == 0
- pop {r2-r12}
- .else
- ldr r2, [vcpu, #CP15_OFFSET(c13_CID)]
- ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
- ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
- ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
- ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
- ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
- ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
- ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
- ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
- ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
- ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
- .endif
-
- mcr p15, 0, r2, c13, c0, 1 @ CID
- mcr p15, 0, r3, c13, c0, 2 @ TID_URW
- mcr p15, 0, r4, c13, c0, 3 @ TID_URO
- mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV
- mcr p15, 0, r6, c5, c0, 0 @ DFSR
- mcr p15, 0, r7, c5, c0, 1 @ IFSR
- mcr p15, 0, r8, c5, c1, 0 @ ADFSR
- mcr p15, 0, r9, c5, c1, 1 @ AIFSR
- mcr p15, 0, r10, c6, c0, 0 @ DFAR
- mcr p15, 0, r11, c6, c0, 2 @ IFAR
- mcr p15, 0, r12, c12, c0, 0 @ VBAR
-
- .if \read_from_vcpu == 0
- pop {r2-r12}
- .else
- ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
- ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
- ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
- ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)]
- add r12, vcpu, #CP15_OFFSET(c2_TTBR0)
- ldrd r6, r7, [r12]
- add r12, vcpu, #CP15_OFFSET(c2_TTBR1)
- ldrd r8, r9, [r12]
- ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
- ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
- ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
- .endif
-
- mcr p15, 0, r2, c1, c0, 0 @ SCTLR
- mcr p15, 0, r3, c1, c0, 2 @ CPACR
- mcr p15, 0, r4, c2, c0, 2 @ TTBCR
- mcr p15, 0, r5, c3, c0, 0 @ DACR
- mcrr p15, 0, r6, r7, c2 @ TTBR 0
- mcrr p15, 1, r8, r9, c2 @ TTBR 1
- mcr p15, 0, r10, c10, c2, 0 @ PRRR
- mcr p15, 0, r11, c10, c2, 1 @ NMRR
- mcr p15, 2, r12, c0, c0, 0 @ CSSELR
-.endm
-
-/*
- * Save the VGIC CPU state into memory
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro save_vgic_state
- /* Get VGIC VCTRL base into r2 */
- ldr r2, [vcpu, #VCPU_KVM]
- ldr r2, [r2, #KVM_VGIC_VCTRL]
- cmp r2, #0
- beq 2f
-
- /* Compute the address of struct vgic_cpu */
- add r11, vcpu, #VCPU_VGIC_CPU
-
- /* Save all interesting registers */
- ldr r4, [r2, #GICH_VMCR]
- ldr r5, [r2, #GICH_MISR]
- ldr r6, [r2, #GICH_EISR0]
- ldr r7, [r2, #GICH_EISR1]
- ldr r8, [r2, #GICH_ELRSR0]
- ldr r9, [r2, #GICH_ELRSR1]
- ldr r10, [r2, #GICH_APR]
-ARM_BE8(rev r4, r4 )
-ARM_BE8(rev r5, r5 )
-ARM_BE8(rev r6, r6 )
-ARM_BE8(rev r7, r7 )
-ARM_BE8(rev r8, r8 )
-ARM_BE8(rev r9, r9 )
-ARM_BE8(rev r10, r10 )
-
- str r4, [r11, #VGIC_V2_CPU_VMCR]
- str r5, [r11, #VGIC_V2_CPU_MISR]
-#ifdef CONFIG_CPU_ENDIAN_BE8
- str r6, [r11, #(VGIC_V2_CPU_EISR + 4)]
- str r7, [r11, #VGIC_V2_CPU_EISR]
- str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
- str r9, [r11, #VGIC_V2_CPU_ELRSR]
-#else
- str r6, [r11, #VGIC_V2_CPU_EISR]
- str r7, [r11, #(VGIC_V2_CPU_EISR + 4)]
- str r8, [r11, #VGIC_V2_CPU_ELRSR]
- str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
-#endif
- str r10, [r11, #VGIC_V2_CPU_APR]
-
- /* Clear GICH_HCR */
- mov r5, #0
- str r5, [r2, #GICH_HCR]
-
- /* Save list registers */
- add r2, r2, #GICH_LR0
- add r3, r11, #VGIC_V2_CPU_LR
- ldr r4, [r11, #VGIC_CPU_NR_LR]
-1: ldr r6, [r2], #4
-ARM_BE8(rev r6, r6 )
- str r6, [r3], #4
- subs r4, r4, #1
- bne 1b
-2:
-.endm
-
-/*
- * Restore the VGIC CPU state from memory
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro restore_vgic_state
- /* Get VGIC VCTRL base into r2 */
- ldr r2, [vcpu, #VCPU_KVM]
- ldr r2, [r2, #KVM_VGIC_VCTRL]
- cmp r2, #0
- beq 2f
-
- /* Compute the address of struct vgic_cpu */
- add r11, vcpu, #VCPU_VGIC_CPU
-
- /* We only restore a minimal set of registers */
- ldr r3, [r11, #VGIC_V2_CPU_HCR]
- ldr r4, [r11, #VGIC_V2_CPU_VMCR]
- ldr r8, [r11, #VGIC_V2_CPU_APR]
-ARM_BE8(rev r3, r3 )
-ARM_BE8(rev r4, r4 )
-ARM_BE8(rev r8, r8 )
-
- str r3, [r2, #GICH_HCR]
- str r4, [r2, #GICH_VMCR]
- str r8, [r2, #GICH_APR]
-
- /* Restore list registers */
- add r2, r2, #GICH_LR0
- add r3, r11, #VGIC_V2_CPU_LR
- ldr r4, [r11, #VGIC_CPU_NR_LR]
-1: ldr r6, [r3], #4
-ARM_BE8(rev r6, r6 )
- str r6, [r2], #4
- subs r4, r4, #1
- bne 1b
-2:
-.endm
-
-#define CNTHCTL_PL1PCTEN (1 << 0)
-#define CNTHCTL_PL1PCEN (1 << 1)
-
-/*
- * Save the timer state onto the VCPU and allow physical timer/counter access
- * for the host.
- *
- * Assumes vcpu pointer in vcpu reg
- * Clobbers r2-r5
- */
-.macro save_timer_state
- ldr r4, [vcpu, #VCPU_KVM]
- ldr r2, [r4, #KVM_TIMER_ENABLED]
- cmp r2, #0
- beq 1f
-
- mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL
- str r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
-
- isb
-
- mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL
- ldr r4, =VCPU_TIMER_CNTV_CVAL
- add r5, vcpu, r4
- strd r2, r3, [r5]
-
- @ Ensure host CNTVCT == CNTPCT
- mov r2, #0
- mcrr p15, 4, r2, r2, c14 @ CNTVOFF
-
-1:
- mov r2, #0 @ Clear ENABLE
- mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL
-
- @ Allow physical timer/counter access for the host
- mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL
- orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN)
- mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL
-.endm
-
-/*
- * Load the timer state from the VCPU and deny physical timer/counter access
- * for the host.
- *
- * Assumes vcpu pointer in vcpu reg
- * Clobbers r2-r5
- */
-.macro restore_timer_state
- @ Disallow physical timer access for the guest
- @ Physical counter access is allowed
- mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL
- orr r2, r2, #CNTHCTL_PL1PCTEN
- bic r2, r2, #CNTHCTL_PL1PCEN
- mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL
-
- ldr r4, [vcpu, #VCPU_KVM]
- ldr r2, [r4, #KVM_TIMER_ENABLED]
- cmp r2, #0
- beq 1f
-
- ldr r2, [r4, #KVM_TIMER_CNTVOFF]
- ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)]
- mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF
-
- ldr r4, =VCPU_TIMER_CNTV_CVAL
- add r5, vcpu, r4
- ldrd r2, r3, [r5]
- mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL
- isb
-
- ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
- and r2, r2, #3
- mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL
-1:
-.endm
-
-.equ vmentry, 0
-.equ vmexit, 1
-
-/* Configures the HSTR (Hyp System Trap Register) on entry/return
- * (hardware reset value is 0) */
-.macro set_hstr operation
- mrc p15, 4, r2, c1, c1, 3
- ldr r3, =HSTR_T(15)
- .if \operation == vmentry
- orr r2, r2, r3 @ Trap CR{15}
- .else
- bic r2, r2, r3 @ Don't trap any CRx accesses
- .endif
- mcr p15, 4, r2, c1, c1, 3
-.endm
-
-/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
- * (hardware reset value is 0). Keep previous value in r2.
- * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if
- * VFP wasn't already enabled (always executed on vmtrap).
- * If a label is specified with vmexit, it is branched to if VFP wasn't
- * enabled.
- */
-.macro set_hcptr operation, mask, label = none
- mrc p15, 4, r2, c1, c1, 2
- ldr r3, =\mask
- .if \operation == vmentry
- orr r3, r2, r3 @ Trap coproc-accesses defined in mask
- .else
- bic r3, r2, r3 @ Don't trap defined coproc-accesses
- .endif
- mcr p15, 4, r3, c1, c1, 2
- .if \operation != vmentry
- .if \operation == vmexit
- tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
- beq 1f
- .endif
- isb
- .if \label != none
- b \label
- .endif
-1:
- .endif
-.endm
-
-/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return
- * (hardware reset value is 0) */
-.macro set_hdcr operation
- mrc p15, 4, r2, c1, c1, 1
- ldr r3, =(HDCR_TPM|HDCR_TPMCR)
- .if \operation == vmentry
- orr r2, r2, r3 @ Trap some perfmon accesses
- .else
- bic r2, r2, r3 @ Don't trap any perfmon accesses
- .endif
- mcr p15, 4, r2, c1, c1, 1
-.endm
-
-/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */
-.macro configure_hyp_role operation
- .if \operation == vmentry
- ldr r2, [vcpu, #VCPU_HCR]
- ldr r3, [vcpu, #VCPU_IRQ_LINES]
- orr r2, r2, r3
- .else
- mov r2, #0
- .endif
- mcr p15, 4, r2, c1, c1, 0 @ HCR
-.endm
-
-.macro load_vcpu
- mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR
-.endm