commit b9a07ae9d9e09662013992088fd58ffbcb2f9a30
author Ivo van Doorn <ivdoorn@gmail.com> Mon Aug 23 19:55:22 2010 +0200
committer John W. Linville <linville@tuxdriver.com> Wed Aug 25 14:34:55 2010 -0400
tree 4c406516c317e42539830d3ed71aad98d074aa17
parent 21595bd50dd1ef16cf0dce33835caaf5ab458d4c

rt2x00: Merge rt2800{pci/usb} radio enabling/disabling code to rt2800lib

The functions rt2800pci_enable_radio and rt2800usb_disable_radio are
almost equal and can be merged into rt2800lib. This reduces the number
of functions which must be exported from rt2800lib to the drivers at
the same time.

Also rt2800pci_disable_radio and rt2800usb_disable_radio are almost
equal and can be merged into rt2800lib in a similar fashion.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800usb.c

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 02f9589..82ae58e 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -101,19 +101,6 @@
 	msleep(10);
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 
-	/*
-	 * Send signal to firmware during boot time.
-	 */
-	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
-
-	if (rt2x00_rt(rt2x00dev, RT3070) ||
-	    rt2x00_rt(rt2x00dev, RT3071) ||
-	    rt2x00_rt(rt2x00dev, RT3572)) {
-		udelay(200);
-		rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
-		udelay(10);
-	}
-
 	return 0;
 }
 
@@ -173,30 +160,10 @@
 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
-	u16 word;
 
-	/*
-	 * Initialize all registers.
-	 */
-	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
-		     rt2800_init_registers(rt2x00dev) ||
-		     rt2800_init_bbp(rt2x00dev) ||
-		     rt2800_init_rfcsr(rt2x00dev)))
+	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
 		return -EIO;
 
-	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	udelay(50);
-
-	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-
 	rt2800_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
@@ -211,45 +178,12 @@
 	rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
 	rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
 
-	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	/*
-	 * Initialize LED control
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
-			      word & 0xff, (word >> 8) & 0xff);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
-			      word & 0xff, (word >> 8) & 0xff);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
-			      word & 0xff, (word >> 8) & 0xff);
-
-	return 0;
+	return rt2800_enable_radio(rt2x00dev);
 }
 
 static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	u32 reg;
-
-	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
-
-	/* Wait for DMA, ignore error */
-	rt2800_wait_wpdma_ready(rt2x00dev);
-
+	rt2800_disable_radio(rt2x00dev);
 	rt2x00usb_disable_radio(rt2x00dev);
 }