[PATCH] xtensa: remove verify_area macros
verify_area() is still alive on xtensa in 2.6.17-rc3-git13 It would be nice
to finally be rid of that function across the board.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index dbeb350..848f173 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -34,10 +34,6 @@
bool
default y
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
source "init/Kconfig"
menu "Processor type and features"
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 5c018c5..89e409e 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -1102,7 +1102,7 @@
s32i a7, a2, PT_AREG7
movi a7, 4 # sizeof(unsigned int)
- verify_area a3, a7, a0, a2, .Leac
+ access_ok a0, a3, a7, a2, .Leac
_beqi a6, SYSXTENSA_ATOMIC_SET, .Lset
_beqi a6, SYSXTENSA_ATOMIC_EXG_ADD, .Lexg
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index e252b61..beba497 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -104,7 +104,7 @@
if (act) {
old_sigset_t mask;
- if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
return -EFAULT;
@@ -116,7 +116,7 @@
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
- if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
return -EFAULT;
@@ -236,7 +236,7 @@
err |= __copy_from_user (regs->areg, sc->sc_areg, XCHAL_NUM_AREGS*4);
err |= __get_user(buf, &sc->sc_cpstate);
if (buf) {
- if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
+ if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
goto badframe;
err |= restore_cpextra(buf);
}
@@ -357,7 +357,7 @@
if (regs->depc > 64)
panic ("Double exception sys_sigreturn\n");
- if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask)
@@ -394,7 +394,7 @@
return 0;
}
- if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
diff --git a/include/asm-xtensa/checksum.h b/include/asm-xtensa/checksum.h
index bdc00ae..03114f8 100644
--- a/include/asm-xtensa/checksum.h
+++ b/include/asm-xtensa/checksum.h
@@ -43,8 +43,7 @@
* Note: when you get a NULL pointer exception here this means someone
* passed in an incorrect kernel address to one of these functions.
*
- * If you use these functions directly please don't forget the
- * verify_area().
+ * If you use these functions directly please don't forget the access_ok().
*/
static inline
unsigned int csum_partial_copy_nocheck ( const char *src, char *dst,
diff --git a/include/asm-xtensa/rwsem.h b/include/asm-xtensa/rwsem.h
index 3c02b0e..abcd86d 100644
--- a/include/asm-xtensa/rwsem.h
+++ b/include/asm-xtensa/rwsem.h
@@ -172,4 +172,9 @@
return atomic_add_return(delta, (atomic_t *)(&sem->count));
}
-#endif /* _XTENSA_RWSEM_XADD_H */
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+ return (sem->count != 0);
+}
+
+#endif /* _XTENSA_RWSEM_H */
diff --git a/include/asm-xtensa/uaccess.h b/include/asm-xtensa/uaccess.h
index 06a22b8..88a64e1 100644
--- a/include/asm-xtensa/uaccess.h
+++ b/include/asm-xtensa/uaccess.h
@@ -154,35 +154,6 @@
.Laccess_ok_\@:
.endm
-/*
- * verify_area determines whether a memory access is allowed. It's
- * mostly an unnecessary wrapper for access_ok, but we provide it as a
- * duplicate of the verify_area() C inline function below. See the
- * equivalent C version below for clarity.
- *
- * On error, verify_area branches to a label indicated by parameter
- * <error>. This implies that the macro falls through to the next
- * instruction on success.
- *
- * Note that we assume success is the common case, and we optimize the
- * branch fall-through case on success.
- *
- * On Entry:
- * <aa> register containing memory address
- * <as> register containing memory size
- * <at> temp register
- * <error> label to branch to on error; implies fall-through
- * macro on success
- * On Exit:
- * <aa> preserved
- * <as> preserved
- * <at> destroyed
- */
- .macro verify_area aa, as, at, sp, error
- access_ok \at, \aa, \as, \sp, \error
- .endm
-
-
#else /* __ASSEMBLY__ not defined */
#include <linux/sched.h>
@@ -211,11 +182,6 @@
#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size)))
#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
-static inline int verify_area(int type, const void * addr, unsigned long size)
-{
- return access_ok(type,addr,size) ? 0 : -EFAULT;
-}
-
/*
* These are the main single-value transfer routines. They
* automatically use the right size if we just have the right pointer