| /* |
| * M66592 UDC (USB gadget) |
| * |
| * Copyright (C) 2006-2007 Renesas Solutions Corp. |
| * |
| * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #ifndef __M66592_UDC_H__ |
| #define __M66592_UDC_H__ |
| |
| #define M66592_SYSCFG 0x00 |
| #define M66592_XTAL 0xC000 /* b15-14: Crystal selection */ |
| #define M66592_XTAL48 0x8000 /* 48MHz */ |
| #define M66592_XTAL24 0x4000 /* 24MHz */ |
| #define M66592_XTAL12 0x0000 /* 12MHz */ |
| #define M66592_XCKE 0x2000 /* b13: External clock enable */ |
| #define M66592_RCKE 0x1000 /* b12: Register clock enable */ |
| #define M66592_PLLC 0x0800 /* b11: PLL control */ |
| #define M66592_SCKE 0x0400 /* b10: USB clock enable */ |
| #define M66592_ATCKM 0x0100 /* b8: Automatic supply functional enable */ |
| #define M66592_HSE 0x0080 /* b7: Hi-speed enable */ |
| #define M66592_DCFM 0x0040 /* b6: Controller function select */ |
| #define M66592_DMRPD 0x0020 /* b5: D- pull down control */ |
| #define M66592_DPRPU 0x0010 /* b4: D+ pull up control */ |
| #define M66592_FSRPC 0x0004 /* b2: Full-speed receiver enable */ |
| #define M66592_PCUT 0x0002 /* b1: Low power sleep enable */ |
| #define M66592_USBE 0x0001 /* b0: USB module operation enable */ |
| |
| #define M66592_SYSSTS 0x02 |
| #define M66592_LNST 0x0003 /* b1-0: D+, D- line status */ |
| #define M66592_SE1 0x0003 /* SE1 */ |
| #define M66592_KSTS 0x0002 /* K State */ |
| #define M66592_JSTS 0x0001 /* J State */ |
| #define M66592_SE0 0x0000 /* SE0 */ |
| |
| #define M66592_DVSTCTR 0x04 |
| #define M66592_WKUP 0x0100 /* b8: Remote wakeup */ |
| #define M66592_RWUPE 0x0080 /* b7: Remote wakeup sense */ |
| #define M66592_USBRST 0x0040 /* b6: USB reset enable */ |
| #define M66592_RESUME 0x0020 /* b5: Resume enable */ |
| #define M66592_UACT 0x0010 /* b4: USB bus enable */ |
| #define M66592_RHST 0x0003 /* b1-0: Reset handshake status */ |
| #define M66592_HSMODE 0x0003 /* Hi-Speed mode */ |
| #define M66592_FSMODE 0x0002 /* Full-Speed mode */ |
| #define M66592_HSPROC 0x0001 /* HS handshake is processing */ |
| |
| #define M66592_TESTMODE 0x06 |
| #define M66592_UTST 0x000F /* b4-0: Test select */ |
| #define M66592_H_TST_PACKET 0x000C /* HOST TEST Packet */ |
| #define M66592_H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ |
| #define M66592_H_TST_K 0x000A /* HOST TEST K */ |
| #define M66592_H_TST_J 0x0009 /* HOST TEST J */ |
| #define M66592_H_TST_NORMAL 0x0000 /* HOST Normal Mode */ |
| #define M66592_P_TST_PACKET 0x0004 /* PERI TEST Packet */ |
| #define M66592_P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ |
| #define M66592_P_TST_K 0x0002 /* PERI TEST K */ |
| #define M66592_P_TST_J 0x0001 /* PERI TEST J */ |
| #define M66592_P_TST_NORMAL 0x0000 /* PERI Normal Mode */ |
| |
| #define M66592_PINCFG 0x0A |
| #define M66592_LDRV 0x8000 /* b15: Drive Current Adjust */ |
| #define M66592_BIGEND 0x0100 /* b8: Big endian mode */ |
| |
| #define M66592_DMA0CFG 0x0C |
| #define M66592_DMA1CFG 0x0E |
| #define M66592_DREQA 0x4000 /* b14: Dreq active select */ |
| #define M66592_BURST 0x2000 /* b13: Burst mode */ |
| #define M66592_DACKA 0x0400 /* b10: Dack active select */ |
| #define M66592_DFORM 0x0380 /* b9-7: DMA mode select */ |
| #define M66592_CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ |
| #define M66592_CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ |
| #define M66592_CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ |
| #define M66592_SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ |
| #define M66592_SPLIT_DACK_DSTB 0x0300 /* DACK + DSTB0 mode (SPLIT bus) */ |
| #define M66592_DENDA 0x0040 /* b6: Dend active select */ |
| #define M66592_PKTM 0x0020 /* b5: Packet mode */ |
| #define M66592_DENDE 0x0010 /* b4: Dend enable */ |
| #define M66592_OBUS 0x0004 /* b2: OUTbus mode */ |
| |
| #define M66592_CFIFO 0x10 |
| #define M66592_D0FIFO 0x14 |
| #define M66592_D1FIFO 0x18 |
| |
| #define M66592_CFIFOSEL 0x1E |
| #define M66592_D0FIFOSEL 0x24 |
| #define M66592_D1FIFOSEL 0x2A |
| #define M66592_RCNT 0x8000 /* b15: Read count mode */ |
| #define M66592_REW 0x4000 /* b14: Buffer rewind */ |
| #define M66592_DCLRM 0x2000 /* b13: DMA buffer clear mode */ |
| #define M66592_DREQE 0x1000 /* b12: DREQ output enable */ |
| #define M66592_MBW 0x0400 /* b10: Maximum bit width for FIFO access */ |
| #define M66592_MBW_8 0x0000 /* 8bit */ |
| #define M66592_MBW_16 0x0400 /* 16bit */ |
| #define M66592_TRENB 0x0200 /* b9: Transaction counter enable */ |
| #define M66592_TRCLR 0x0100 /* b8: Transaction counter clear */ |
| #define M66592_DEZPM 0x0080 /* b7: Zero-length packet additional mode */ |
| #define M66592_ISEL 0x0020 /* b5: DCP FIFO port direction select */ |
| #define M66592_CURPIPE 0x0007 /* b2-0: PIPE select */ |
| |
| #define M66592_CFIFOCTR 0x20 |
| #define M66592_D0FIFOCTR 0x26 |
| #define M66592_D1FIFOCTR 0x2c |
| #define M66592_BVAL 0x8000 /* b15: Buffer valid flag */ |
| #define M66592_BCLR 0x4000 /* b14: Buffer clear */ |
| #define M66592_FRDY 0x2000 /* b13: FIFO ready */ |
| #define M66592_DTLN 0x0FFF /* b11-0: FIFO received data length */ |
| |
| #define M66592_CFIFOSIE 0x22 |
| #define M66592_TGL 0x8000 /* b15: Buffer toggle */ |
| #define M66592_SCLR 0x4000 /* b14: Buffer clear */ |
| #define M66592_SBUSY 0x2000 /* b13: SIE_FIFO busy */ |
| |
| #define M66592_D0FIFOTRN 0x28 |
| #define M66592_D1FIFOTRN 0x2E |
| #define M66592_TRNCNT 0xFFFF /* b15-0: Transaction counter */ |
| |
| #define M66592_INTENB0 0x30 |
| #define M66592_VBSE 0x8000 /* b15: VBUS interrupt */ |
| #define M66592_RSME 0x4000 /* b14: Resume interrupt */ |
| #define M66592_SOFE 0x2000 /* b13: Frame update interrupt */ |
| #define M66592_DVSE 0x1000 /* b12: Device state transition interrupt */ |
| #define M66592_CTRE 0x0800 /* b11: Control transfer stage transition interrupt */ |
| #define M66592_BEMPE 0x0400 /* b10: Buffer empty interrupt */ |
| #define M66592_NRDYE 0x0200 /* b9: Buffer not ready interrupt */ |
| #define M66592_BRDYE 0x0100 /* b8: Buffer ready interrupt */ |
| #define M66592_URST 0x0080 /* b7: USB reset detected interrupt */ |
| #define M66592_SADR 0x0040 /* b6: Set address executed interrupt */ |
| #define M66592_SCFG 0x0020 /* b5: Set configuration executed interrupt */ |
| #define M66592_SUSP 0x0010 /* b4: Suspend detected interrupt */ |
| #define M66592_WDST 0x0008 /* b3: Control write data stage completed interrupt */ |
| #define M66592_RDST 0x0004 /* b2: Control read data stage completed interrupt */ |
| #define M66592_CMPL 0x0002 /* b1: Control transfer complete interrupt */ |
| #define M66592_SERR 0x0001 /* b0: Sequence error interrupt */ |
| |
| #define M66592_INTENB1 0x32 |
| #define M66592_BCHGE 0x4000 /* b14: USB us chenge interrupt */ |
| #define M66592_DTCHE 0x1000 /* b12: Detach sense interrupt */ |
| #define M66592_SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ |
| #define M66592_SACKE 0x0010 /* b4: SETUP ACK interrupt */ |
| #define M66592_BRDYM 0x0004 /* b2: BRDY clear timing */ |
| #define M66592_INTL 0x0002 /* b1: Interrupt sense select */ |
| #define M66592_PCSE 0x0001 /* b0: PCUT enable by CS assert */ |
| |
| #define M66592_BRDYENB 0x36 |
| #define M66592_BRDYSTS 0x46 |
| #define M66592_BRDY7 0x0080 /* b7: PIPE7 */ |
| #define M66592_BRDY6 0x0040 /* b6: PIPE6 */ |
| #define M66592_BRDY5 0x0020 /* b5: PIPE5 */ |
| #define M66592_BRDY4 0x0010 /* b4: PIPE4 */ |
| #define M66592_BRDY3 0x0008 /* b3: PIPE3 */ |
| #define M66592_BRDY2 0x0004 /* b2: PIPE2 */ |
| #define M66592_BRDY1 0x0002 /* b1: PIPE1 */ |
| #define M66592_BRDY0 0x0001 /* b1: PIPE0 */ |
| |
| #define M66592_NRDYENB 0x38 |
| #define M66592_NRDYSTS 0x48 |
| #define M66592_NRDY7 0x0080 /* b7: PIPE7 */ |
| #define M66592_NRDY6 0x0040 /* b6: PIPE6 */ |
| #define M66592_NRDY5 0x0020 /* b5: PIPE5 */ |
| #define M66592_NRDY4 0x0010 /* b4: PIPE4 */ |
| #define M66592_NRDY3 0x0008 /* b3: PIPE3 */ |
| #define M66592_NRDY2 0x0004 /* b2: PIPE2 */ |
| #define M66592_NRDY1 0x0002 /* b1: PIPE1 */ |
| #define M66592_NRDY0 0x0001 /* b1: PIPE0 */ |
| |
| #define M66592_BEMPENB 0x3A |
| #define M66592_BEMPSTS 0x4A |
| #define M66592_BEMP7 0x0080 /* b7: PIPE7 */ |
| #define M66592_BEMP6 0x0040 /* b6: PIPE6 */ |
| #define M66592_BEMP5 0x0020 /* b5: PIPE5 */ |
| #define M66592_BEMP4 0x0010 /* b4: PIPE4 */ |
| #define M66592_BEMP3 0x0008 /* b3: PIPE3 */ |
| #define M66592_BEMP2 0x0004 /* b2: PIPE2 */ |
| #define M66592_BEMP1 0x0002 /* b1: PIPE1 */ |
| #define M66592_BEMP0 0x0001 /* b0: PIPE0 */ |
| |
| #define M66592_SOFCFG 0x3C |
| #define M66592_SOFM 0x000C /* b3-2: SOF palse mode */ |
| #define M66592_SOF_125US 0x0008 /* SOF OUT 125us uFrame Signal */ |
| #define M66592_SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ |
| #define M66592_SOF_DISABLE 0x0000 /* SOF OUT Disable */ |
| |
| #define M66592_INTSTS0 0x40 |
| #define M66592_VBINT 0x8000 /* b15: VBUS interrupt */ |
| #define M66592_RESM 0x4000 /* b14: Resume interrupt */ |
| #define M66592_SOFR 0x2000 /* b13: SOF frame update interrupt */ |
| #define M66592_DVST 0x1000 /* b12: Device state transition interrupt */ |
| #define M66592_CTRT 0x0800 /* b11: Control transfer stage transition interrupt */ |
| #define M66592_BEMP 0x0400 /* b10: Buffer empty interrupt */ |
| #define M66592_NRDY 0x0200 /* b9: Buffer not ready interrupt */ |
| #define M66592_BRDY 0x0100 /* b8: Buffer ready interrupt */ |
| #define M66592_VBSTS 0x0080 /* b7: VBUS input port */ |
| #define M66592_DVSQ 0x0070 /* b6-4: Device state */ |
| #define M66592_DS_SPD_CNFG 0x0070 /* Suspend Configured */ |
| #define M66592_DS_SPD_ADDR 0x0060 /* Suspend Address */ |
| #define M66592_DS_SPD_DFLT 0x0050 /* Suspend Default */ |
| #define M66592_DS_SPD_POWR 0x0040 /* Suspend Powered */ |
| #define M66592_DS_SUSP 0x0040 /* Suspend */ |
| #define M66592_DS_CNFG 0x0030 /* Configured */ |
| #define M66592_DS_ADDS 0x0020 /* Address */ |
| #define M66592_DS_DFLT 0x0010 /* Default */ |
| #define M66592_DS_POWR 0x0000 /* Powered */ |
| #define M66592_DVSQS 0x0030 /* b5-4: Device state */ |
| #define M66592_VALID 0x0008 /* b3: Setup packet detected flag */ |
| #define M66592_CTSQ 0x0007 /* b2-0: Control transfer stage */ |
| #define M66592_CS_SQER 0x0006 /* Sequence error */ |
| #define M66592_CS_WRND 0x0005 /* Control write nodata status stage */ |
| #define M66592_CS_WRSS 0x0004 /* Control write status stage */ |
| #define M66592_CS_WRDS 0x0003 /* Control write data stage */ |
| #define M66592_CS_RDSS 0x0002 /* Control read status stage */ |
| #define M66592_CS_RDDS 0x0001 /* Control read data stage */ |
| #define M66592_CS_IDST 0x0000 /* Idle or setup stage */ |
| |
| #define M66592_INTSTS1 0x42 |
| #define M66592_BCHG 0x4000 /* b14: USB bus chenge interrupt */ |
| #define M66592_DTCH 0x1000 /* b12: Detach sense interrupt */ |
| #define M66592_SIGN 0x0020 /* b5: SETUP IGNORE interrupt */ |
| #define M66592_SACK 0x0010 /* b4: SETUP ACK interrupt */ |
| |
| #define M66592_FRMNUM 0x4C |
| #define M66592_OVRN 0x8000 /* b15: Overrun error */ |
| #define M66592_CRCE 0x4000 /* b14: Received data error */ |
| #define M66592_SOFRM 0x0800 /* b11: SOF output mode */ |
| #define M66592_FRNM 0x07FF /* b10-0: Frame number */ |
| |
| #define M66592_UFRMNUM 0x4E |
| #define M66592_UFRNM 0x0007 /* b2-0: Micro frame number */ |
| |
| #define M66592_RECOVER 0x50 |
| #define M66592_STSRECOV 0x0700 /* Status recovery */ |
| #define M66592_STSR_HI 0x0400 /* FULL(0) or HI(1) Speed */ |
| #define M66592_STSR_DEFAULT 0x0100 /* Default state */ |
| #define M66592_STSR_ADDRESS 0x0200 /* Address state */ |
| #define M66592_STSR_CONFIG 0x0300 /* Configured state */ |
| #define M66592_USBADDR 0x007F /* b6-0: USB address */ |
| |
| #define M66592_USBREQ 0x54 |
| #define M66592_bRequest 0xFF00 /* b15-8: bRequest */ |
| #define M66592_GET_STATUS 0x0000 |
| #define M66592_CLEAR_FEATURE 0x0100 |
| #define M66592_ReqRESERVED 0x0200 |
| #define M66592_SET_FEATURE 0x0300 |
| #define M66592_ReqRESERVED1 0x0400 |
| #define M66592_SET_ADDRESS 0x0500 |
| #define M66592_GET_DESCRIPTOR 0x0600 |
| #define M66592_SET_DESCRIPTOR 0x0700 |
| #define M66592_GET_CONFIGURATION 0x0800 |
| #define M66592_SET_CONFIGURATION 0x0900 |
| #define M66592_GET_INTERFACE 0x0A00 |
| #define M66592_SET_INTERFACE 0x0B00 |
| #define M66592_SYNCH_FRAME 0x0C00 |
| #define M66592_bmRequestType 0x00FF /* b7-0: bmRequestType */ |
| #define M66592_bmRequestTypeDir 0x0080 /* b7 : Data transfer direction */ |
| #define M66592_HOST_TO_DEVICE 0x0000 |
| #define M66592_DEVICE_TO_HOST 0x0080 |
| #define M66592_bmRequestTypeType 0x0060 /* b6-5: Type */ |
| #define M66592_STANDARD 0x0000 |
| #define M66592_CLASS 0x0020 |
| #define M66592_VENDOR 0x0040 |
| #define M66592_bmRequestTypeRecip 0x001F /* b4-0: Recipient */ |
| #define M66592_DEVICE 0x0000 |
| #define M66592_INTERFACE 0x0001 |
| #define M66592_ENDPOINT 0x0002 |
| |
| #define M66592_USBVAL 0x56 |
| #define M66592_wValue 0xFFFF /* b15-0: wValue */ |
| /* Standard Feature Selector */ |
| #define M66592_ENDPOINT_HALT 0x0000 |
| #define M66592_DEVICE_REMOTE_WAKEUP 0x0001 |
| #define M66592_TEST_MODE 0x0002 |
| /* Descriptor Types */ |
| #define M66592_DT_TYPE 0xFF00 |
| #define M66592_GET_DT_TYPE(v) (((v) & DT_TYPE) >> 8) |
| #define M66592_DT_DEVICE 0x01 |
| #define M66592_DT_CONFIGURATION 0x02 |
| #define M66592_DT_STRING 0x03 |
| #define M66592_DT_INTERFACE 0x04 |
| #define M66592_DT_ENDPOINT 0x05 |
| #define M66592_DT_DEVICE_QUALIFIER 0x06 |
| #define M66592_DT_OTHER_SPEED_CONFIGURATION 0x07 |
| #define M66592_DT_INTERFACE_POWER 0x08 |
| #define M66592_DT_INDEX 0x00FF |
| #define M66592_CONF_NUM 0x00FF |
| #define M66592_ALT_SET 0x00FF |
| |
| #define M66592_USBINDEX 0x58 |
| #define M66592_wIndex 0xFFFF /* b15-0: wIndex */ |
| #define M66592_TEST_SELECT 0xFF00 /* b15-b8: Test Mode Selectors */ |
| #define M66592_TEST_J 0x0100 /* Test_J */ |
| #define M66592_TEST_K 0x0200 /* Test_K */ |
| #define M66592_TEST_SE0_NAK 0x0300 /* Test_SE0_NAK */ |
| #define M66592_TEST_PACKET 0x0400 /* Test_Packet */ |
| #define M66592_TEST_FORCE_ENABLE 0x0500 /* Test_Force_Enable */ |
| #define M66592_TEST_STSelectors 0x0600 /* Standard test selectors */ |
| #define M66592_TEST_Reserved 0x4000 /* Reserved */ |
| #define M66592_TEST_VSTModes 0xC000 /* Vendor-specific test modes */ |
| #define M66592_EP_DIR 0x0080 /* b7: Endpoint Direction */ |
| #define M66592_EP_DIR_IN 0x0080 |
| #define M66592_EP_DIR_OUT 0x0000 |
| |
| #define M66592_USBLENG 0x5A |
| #define M66592_wLength 0xFFFF /* b15-0: wLength */ |
| |
| #define M66592_DCPCFG 0x5C |
| #define M66592_CNTMD 0x0100 /* b8: Continuous transfer mode select */ |
| #define M66592_DIR 0x0010 /* b4: Control transfer DIR select */ |
| |
| #define M66592_DCPMAXP 0x5E |
| #define M66592_DEVSEL 0xC000 /* b15-14: Device address select */ |
| #define M66592_DEVICE_0 0x0000 /* Device address 0 */ |
| #define M66592_DEVICE_1 0x4000 /* Device address 1 */ |
| #define M66592_DEVICE_2 0x8000 /* Device address 2 */ |
| #define M66592_DEVICE_3 0xC000 /* Device address 3 */ |
| #define M66592_MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */ |
| |
| #define M66592_DCPCTR 0x60 |
| #define M66592_BSTS 0x8000 /* b15: Buffer status */ |
| #define M66592_SUREQ 0x4000 /* b14: Send USB request */ |
| #define M66592_SQCLR 0x0100 /* b8: Sequence toggle bit clear */ |
| #define M66592_SQSET 0x0080 /* b7: Sequence toggle bit set */ |
| #define M66592_SQMON 0x0040 /* b6: Sequence toggle bit monitor */ |
| #define M66592_CCPL 0x0004 /* b2: Enable control transfer complete */ |
| #define M66592_PID 0x0003 /* b1-0: Response PID */ |
| #define M66592_PID_STALL 0x0002 /* STALL */ |
| #define M66592_PID_BUF 0x0001 /* BUF */ |
| #define M66592_PID_NAK 0x0000 /* NAK */ |
| |
| #define M66592_PIPESEL 0x64 |
| #define M66592_PIPENM 0x0007 /* b2-0: Pipe select */ |
| #define M66592_PIPE0 0x0000 /* PIPE 0 */ |
| #define M66592_PIPE1 0x0001 /* PIPE 1 */ |
| #define M66592_PIPE2 0x0002 /* PIPE 2 */ |
| #define M66592_PIPE3 0x0003 /* PIPE 3 */ |
| #define M66592_PIPE4 0x0004 /* PIPE 4 */ |
| #define M66592_PIPE5 0x0005 /* PIPE 5 */ |
| #define M66592_PIPE6 0x0006 /* PIPE 6 */ |
| #define M66592_PIPE7 0x0007 /* PIPE 7 */ |
| |
| #define M66592_PIPECFG 0x66 |
| #define M66592_TYP 0xC000 /* b15-14: Transfer type */ |
| #define M66592_ISO 0xC000 /* Isochronous */ |
| #define M66592_INT 0x8000 /* Interrupt */ |
| #define M66592_BULK 0x4000 /* Bulk */ |
| #define M66592_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */ |
| #define M66592_DBLB 0x0200 /* b9: Double buffer mode select */ |
| #define M66592_CNTMD 0x0100 /* b8: Continuous transfer mode select */ |
| #define M66592_SHTNAK 0x0080 /* b7: Transfer end NAK */ |
| #define M66592_DIR 0x0010 /* b4: Transfer direction select */ |
| #define M66592_DIR_H_OUT 0x0010 /* HOST OUT */ |
| #define M66592_DIR_P_IN 0x0010 /* PERI IN */ |
| #define M66592_DIR_H_IN 0x0000 /* HOST IN */ |
| #define M66592_DIR_P_OUT 0x0000 /* PERI OUT */ |
| #define M66592_EPNUM 0x000F /* b3-0: Eendpoint number select */ |
| #define M66592_EP1 0x0001 |
| #define M66592_EP2 0x0002 |
| #define M66592_EP3 0x0003 |
| #define M66592_EP4 0x0004 |
| #define M66592_EP5 0x0005 |
| #define M66592_EP6 0x0006 |
| #define M66592_EP7 0x0007 |
| #define M66592_EP8 0x0008 |
| #define M66592_EP9 0x0009 |
| #define M66592_EP10 0x000A |
| #define M66592_EP11 0x000B |
| #define M66592_EP12 0x000C |
| #define M66592_EP13 0x000D |
| #define M66592_EP14 0x000E |
| #define M66592_EP15 0x000F |
| |
| #define M66592_PIPEBUF 0x68 |
| #define M66592_BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ |
| #define M66592_BUF_SIZE(x) ((((x) / 64) - 1) << 10) |
| #define M66592_BUFNMB 0x00FF /* b7-0: Pipe buffer number */ |
| |
| #define M66592_PIPEMAXP 0x6A |
| #define M66592_MXPS 0x07FF /* b10-0: Maxpacket size */ |
| |
| #define M66592_PIPEPERI 0x6C |
| #define M66592_IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */ |
| #define M66592_IITV 0x0007 /* b2-0: Isochronous interval */ |
| |
| #define M66592_PIPE1CTR 0x70 |
| #define M66592_PIPE2CTR 0x72 |
| #define M66592_PIPE3CTR 0x74 |
| #define M66592_PIPE4CTR 0x76 |
| #define M66592_PIPE5CTR 0x78 |
| #define M66592_PIPE6CTR 0x7A |
| #define M66592_PIPE7CTR 0x7C |
| #define M66592_BSTS 0x8000 /* b15: Buffer status */ |
| #define M66592_INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */ |
| #define M66592_ACLRM 0x0200 /* b9: Out buffer auto clear mode */ |
| #define M66592_SQCLR 0x0100 /* b8: Sequence toggle bit clear */ |
| #define M66592_SQSET 0x0080 /* b7: Sequence toggle bit set */ |
| #define M66592_SQMON 0x0040 /* b6: Sequence toggle bit monitor */ |
| #define M66592_PID 0x0003 /* b1-0: Response PID */ |
| |
| #define M66592_INVALID_REG 0x7E |
| |
| |
| #define __iomem |
| |
| #define get_pipectr_addr(pipenum) (M66592_PIPE1CTR + (pipenum - 1) * 2) |
| |
| #define M66592_MAX_SAMPLING 10 |
| |
| #define M66592_MAX_NUM_PIPE 8 |
| #define M66592_MAX_NUM_BULK 3 |
| #define M66592_MAX_NUM_ISOC 2 |
| #define M66592_MAX_NUM_INT 2 |
| |
| #define M66592_BASE_PIPENUM_BULK 3 |
| #define M66592_BASE_PIPENUM_ISOC 1 |
| #define M66592_BASE_PIPENUM_INT 6 |
| |
| #define M66592_BASE_BUFNUM 6 |
| #define M66592_MAX_BUFNUM 0x4F |
| |
| struct m66592_pipe_info { |
| u16 pipe; |
| u16 epnum; |
| u16 maxpacket; |
| u16 type; |
| u16 interval; |
| u16 dir_in; |
| }; |
| |
| struct m66592_request { |
| struct usb_request req; |
| struct list_head queue; |
| }; |
| |
| struct m66592_ep { |
| struct usb_ep ep; |
| struct m66592 *m66592; |
| |
| struct list_head queue; |
| unsigned busy:1; |
| unsigned internal_ccpl:1; /* use only control */ |
| |
| /* this member can able to after m66592_enable */ |
| unsigned use_dma:1; |
| u16 pipenum; |
| u16 type; |
| const struct usb_endpoint_descriptor *desc; |
| /* register address */ |
| unsigned long fifoaddr; |
| unsigned long fifosel; |
| unsigned long fifoctr; |
| unsigned long fifotrn; |
| unsigned long pipectr; |
| }; |
| |
| struct m66592 { |
| spinlock_t lock; |
| void __iomem *reg; |
| |
| struct usb_gadget gadget; |
| struct usb_gadget_driver *driver; |
| |
| struct m66592_ep ep[M66592_MAX_NUM_PIPE]; |
| struct m66592_ep *pipenum2ep[M66592_MAX_NUM_PIPE]; |
| struct m66592_ep *epaddr2ep[16]; |
| |
| struct usb_request *ep0_req; /* for internal request */ |
| u16 *ep0_buf; /* for internal request */ |
| |
| struct timer_list timer; |
| |
| u16 old_vbus; |
| int scount; |
| |
| int old_dvsq; |
| |
| /* pipe config */ |
| int bulk; |
| int interrupt; |
| int isochronous; |
| int num_dma; |
| int bi_bufnum; /* bulk and isochronous's bufnum */ |
| }; |
| |
| #define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget) |
| #define m66592_to_gadget(m66592) (&m66592->gadget) |
| |
| #define is_bulk_pipe(pipenum) \ |
| ((pipenum >= M66592_BASE_PIPENUM_BULK) && \ |
| (pipenum < (M66592_BASE_PIPENUM_BULK + M66592_MAX_NUM_BULK))) |
| #define is_interrupt_pipe(pipenum) \ |
| ((pipenum >= M66592_BASE_PIPENUM_INT) && \ |
| (pipenum < (M66592_BASE_PIPENUM_INT + M66592_MAX_NUM_INT))) |
| #define is_isoc_pipe(pipenum) \ |
| ((pipenum >= M66592_BASE_PIPENUM_ISOC) && \ |
| (pipenum < (M66592_BASE_PIPENUM_ISOC + M66592_MAX_NUM_ISOC))) |
| |
| #define enable_irq_ready(m66592, pipenum) \ |
| enable_pipe_irq(m66592, pipenum, M66592_BRDYENB) |
| #define disable_irq_ready(m66592, pipenum) \ |
| disable_pipe_irq(m66592, pipenum, M66592_BRDYENB) |
| #define enable_irq_empty(m66592, pipenum) \ |
| enable_pipe_irq(m66592, pipenum, M66592_BEMPENB) |
| #define disable_irq_empty(m66592, pipenum) \ |
| disable_pipe_irq(m66592, pipenum, M66592_BEMPENB) |
| #define enable_irq_nrdy(m66592, pipenum) \ |
| enable_pipe_irq(m66592, pipenum, M66592_NRDYENB) |
| #define disable_irq_nrdy(m66592, pipenum) \ |
| disable_pipe_irq(m66592, pipenum, M66592_NRDYENB) |
| |
| /*-------------------------------------------------------------------------*/ |
| static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset) |
| { |
| return inw((unsigned long)m66592->reg + offset); |
| } |
| |
| static inline void m66592_read_fifo(struct m66592 *m66592, |
| unsigned long offset, |
| void *buf, unsigned long len) |
| { |
| unsigned long fifoaddr = (unsigned long)m66592->reg + offset; |
| |
| len = (len + 1) / 2; |
| insw(fifoaddr, buf, len); |
| } |
| |
| static inline void m66592_write(struct m66592 *m66592, u16 val, |
| unsigned long offset) |
| { |
| outw(val, (unsigned long)m66592->reg + offset); |
| } |
| |
| static inline void m66592_write_fifo(struct m66592 *m66592, |
| unsigned long offset, |
| void *buf, unsigned long len) |
| { |
| unsigned long fifoaddr = (unsigned long)m66592->reg + offset; |
| unsigned long odd = len & 0x0001; |
| |
| len = len / 2; |
| outsw(fifoaddr, buf, len); |
| if (odd) { |
| unsigned char *p = buf + len*2; |
| outb(*p, fifoaddr); |
| } |
| } |
| |
| static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat, |
| unsigned long offset) |
| { |
| u16 tmp; |
| tmp = m66592_read(m66592, offset); |
| tmp = tmp & (~pat); |
| tmp = tmp | val; |
| m66592_write(m66592, tmp, offset); |
| } |
| |
| #define m66592_bclr(m66592, val, offset) \ |
| m66592_mdfy(m66592, 0, val, offset) |
| #define m66592_bset(m66592, val, offset) \ |
| m66592_mdfy(m66592, val, 0, offset) |
| |
| #endif /* ifndef __M66592_UDC_H__ */ |
| |
| |