diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 19a31f9..2a25bd3 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -628,25 +628,18 @@
 }
 
 static int iscsit_add_reject(
+	struct iscsi_conn *conn,
 	u8 reason,
-	int fail_conn,
-	unsigned char *buf,
-	struct iscsi_conn *conn)
+	unsigned char *buf)
 {
 	struct iscsi_cmd *cmd;
-	struct iscsi_reject *hdr;
-	int ret;
 
 	cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
 	if (!cmd)
 		return -1;
 
 	cmd->iscsi_opcode = ISCSI_OP_REJECT;
-	if (fail_conn)
-		cmd->cmd_flags |= ICF_REJECT_FAIL_CONN;
-
-	hdr	= (struct iscsi_reject *) cmd->pdu;
-	hdr->reason = reason;
+	cmd->reject_reason = reason;
 
 	cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL);
 	if (!cmd->buf_ptr) {
@@ -662,23 +655,16 @@
 	cmd->i_state = ISTATE_SEND_REJECT;
 	iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
 
-	ret = wait_for_completion_interruptible(&cmd->reject_comp);
-	if (ret != 0)
-		return -1;
-
-	return (!fail_conn) ? 0 : -1;
+	return -1;
 }
 
-int iscsit_add_reject_from_cmd(
+static int iscsit_add_reject_from_cmd(
+	struct iscsi_cmd *cmd,
 	u8 reason,
-	int fail_conn,
-	int add_to_conn,
-	unsigned char *buf,
-	struct iscsi_cmd *cmd)
+	bool add_to_conn,
+	unsigned char *buf)
 {
 	struct iscsi_conn *conn;
-	struct iscsi_reject *hdr;
-	int ret;
 
 	if (!cmd->conn) {
 		pr_err("cmd->conn is NULL for ITT: 0x%08x\n",
@@ -688,11 +674,7 @@
 	conn = cmd->conn;
 
 	cmd->iscsi_opcode = ISCSI_OP_REJECT;
-	if (fail_conn)
-		cmd->cmd_flags |= ICF_REJECT_FAIL_CONN;
-
-	hdr	= (struct iscsi_reject *) cmd->pdu;
-	hdr->reason = reason;
+	cmd->reject_reason = reason;
 
 	cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL);
 	if (!cmd->buf_ptr) {
@@ -709,8 +691,6 @@
 
 	cmd->i_state = ISTATE_SEND_REJECT;
 	iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
-
-	ret = wait_for_completion_interruptible(&cmd->reject_comp);
 	/*
 	 * Perform the kref_put now if se_cmd has already been setup by
 	 * scsit_setup_scsi_cmd()
@@ -719,12 +699,19 @@
 		pr_debug("iscsi reject: calling target_put_sess_cmd >>>>>>\n");
 		target_put_sess_cmd(conn->sess->se_sess, &cmd->se_cmd);
 	}
-	if (ret != 0)
-		return -1;
-
-	return (!fail_conn) ? 0 : -1;
+	return -1;
 }
-EXPORT_SYMBOL(iscsit_add_reject_from_cmd);
+
+static int iscsit_add_reject_cmd(struct iscsi_cmd *cmd, u8 reason,
+				 unsigned char *buf)
+{
+	return iscsit_add_reject_from_cmd(cmd, reason, true, buf);
+}
+
+int iscsit_reject_cmd(struct iscsi_cmd *cmd, u8 reason, unsigned char *buf)
+{
+	return iscsit_add_reject_from_cmd(cmd, reason, false, buf);
+}
 
 /*
  * Map some portion of the allocated scatterlist to an iovec, suitable for
@@ -844,8 +831,8 @@
 	    !(hdr->flags & ISCSI_FLAG_CMD_FINAL)) {
 		pr_err("ISCSI_FLAG_CMD_WRITE & ISCSI_FLAG_CMD_FINAL"
 				" not set. Bad iSCSI Initiator.\n");
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_BOOKMARK_INVALID, buf);
 	}
 
 	if (((hdr->flags & ISCSI_FLAG_CMD_READ) ||
@@ -865,8 +852,8 @@
 		pr_err("ISCSI_FLAG_CMD_READ or ISCSI_FLAG_CMD_WRITE"
 			" set when Expected Data Transfer Length is 0 for"
 			" CDB: 0x%02x. Bad iSCSI Initiator.\n", hdr->cdb[0]);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_BOOKMARK_INVALID, buf);
 	}
 done:
 
@@ -875,62 +862,62 @@
 		pr_err("ISCSI_FLAG_CMD_READ and/or ISCSI_FLAG_CMD_WRITE"
 			" MUST be set if Expected Data Transfer Length is not 0."
 			" Bad iSCSI Initiator\n");
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_BOOKMARK_INVALID, buf);
 	}
 
 	if ((hdr->flags & ISCSI_FLAG_CMD_READ) &&
 	    (hdr->flags & ISCSI_FLAG_CMD_WRITE)) {
 		pr_err("Bidirectional operations not supported!\n");
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_BOOKMARK_INVALID, buf);
 	}
 
 	if (hdr->opcode & ISCSI_OP_IMMEDIATE) {
 		pr_err("Illegally set Immediate Bit in iSCSI Initiator"
 				" Scsi Command PDU.\n");
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_BOOKMARK_INVALID, buf);
 	}
 
 	if (payload_length && !conn->sess->sess_ops->ImmediateData) {
 		pr_err("ImmediateData=No but DataSegmentLength=%u,"
 			" protocol error.\n", payload_length);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_PROTOCOL_ERROR, buf);
 	}
 
-	if ((be32_to_cpu(hdr->data_length )== payload_length) &&
+	if ((be32_to_cpu(hdr->data_length) == payload_length) &&
 	    (!(hdr->flags & ISCSI_FLAG_CMD_FINAL))) {
 		pr_err("Expected Data Transfer Length and Length of"
 			" Immediate Data are the same, but ISCSI_FLAG_CMD_FINAL"
 			" bit is not set protocol error\n");
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_PROTOCOL_ERROR, buf);
 	}
 
 	if (payload_length > be32_to_cpu(hdr->data_length)) {
 		pr_err("DataSegmentLength: %u is greater than"
 			" EDTL: %u, protocol error.\n", payload_length,
 				hdr->data_length);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_PROTOCOL_ERROR, buf);
 	}
 
 	if (payload_length > conn->conn_ops->MaxXmitDataSegmentLength) {
 		pr_err("DataSegmentLength: %u is greater than"
 			" MaxXmitDataSegmentLength: %u, protocol error.\n",
 			payload_length, conn->conn_ops->MaxXmitDataSegmentLength);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_PROTOCOL_ERROR, buf);
 	}
 
 	if (payload_length > conn->sess->sess_ops->FirstBurstLength) {
 		pr_err("DataSegmentLength: %u is greater than"
 			" FirstBurstLength: %u, protocol error.\n",
 			payload_length, conn->sess->sess_ops->FirstBurstLength);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
-				1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_BOOKMARK_INVALID, buf);
 	}
 
 	data_direction = (hdr->flags & ISCSI_FLAG_CMD_WRITE) ? DMA_TO_DEVICE :
@@ -985,9 +972,8 @@
 
 		dr = iscsit_allocate_datain_req();
 		if (!dr)
-			return iscsit_add_reject_from_cmd(
-					ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-					1, 1, buf, cmd);
+			return iscsit_add_reject_cmd(cmd,
+					ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 
 		iscsit_attach_datain_req(cmd, dr);
 	}
@@ -1015,18 +1001,16 @@
 	cmd->sense_reason = target_setup_cmd_from_cdb(&cmd->se_cmd, hdr->cdb);
 	if (cmd->sense_reason) {
 		if (cmd->sense_reason == TCM_OUT_OF_RESOURCES) {
-			return iscsit_add_reject_from_cmd(
-					ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-					1, 1, buf, cmd);
+			return iscsit_add_reject_cmd(cmd,
+					ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 		}
 
 		goto attach_cmd;
 	}
 
 	if (iscsit_build_pdu_and_seq_lists(cmd, payload_length) < 0) {
-		return iscsit_add_reject_from_cmd(
-			ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-			1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 	}
 
 attach_cmd:
@@ -1075,10 +1059,6 @@
 
 			target_put_sess_cmd(conn->sess->se_sess, &cmd->se_cmd);
 			return 0;
-		} else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER) {
-			return iscsit_add_reject_from_cmd(
-				ISCSI_REASON_PROTOCOL_ERROR,
-				1, 0, (unsigned char *)hdr, cmd);
 		}
 	}
 
@@ -1149,11 +1129,6 @@
 		} else if (cmd->unsolicited_data)
 			iscsit_set_unsoliticed_dataout(cmd);
 
-		if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
-			return iscsit_add_reject_from_cmd(
-				ISCSI_REASON_PROTOCOL_ERROR,
-				1, 0, (unsigned char *)hdr, cmd);
-
 	} else if (immed_ret == IMMEDIATE_DATA_ERL1_CRC_FAILURE) {
 		/*
 		 * Immediate Data failed DataCRC and ERL>=1,
@@ -1190,9 +1165,8 @@
 	 * traditional iSCSI block I/O.
 	 */
 	if (iscsit_allocate_iovecs(cmd) < 0) {
-		return iscsit_add_reject_from_cmd(
-				ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-				1, 0, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 	}
 	immed_data = cmd->immediate_data;
 
@@ -1282,8 +1256,8 @@
 
 	if (!payload_length) {
 		pr_err("DataOUT payload is ZERO, protocol error.\n");
-		return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
-					buf, conn);
+		return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+					 buf);
 	}
 
 	/* iSCSI write */
@@ -1300,8 +1274,8 @@
 		pr_err("DataSegmentLength: %u is greater than"
 			" MaxXmitDataSegmentLength: %u\n", payload_length,
 			conn->conn_ops->MaxXmitDataSegmentLength);
-		return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
-					buf, conn);
+		return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+					 buf);
 	}
 
 	cmd = iscsit_find_cmd_from_itt_or_dump(conn, hdr->itt,
@@ -1324,8 +1298,7 @@
 	if (cmd->data_direction != DMA_TO_DEVICE) {
 		pr_err("Command ITT: 0x%08x received DataOUT for a"
 			" NON-WRITE command.\n", cmd->init_task_tag);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-				1, 0, buf, cmd);
+		return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR, buf);
 	}
 	se_cmd = &cmd->se_cmd;
 	iscsit_mod_dataout_timer(cmd);
@@ -1334,8 +1307,7 @@
 		pr_err("DataOut Offset: %u, Length %u greater than"
 			" iSCSI Command EDTL %u, protocol error.\n",
 			hdr->offset, payload_length, cmd->se_cmd.data_length);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
-				1, 0, buf, cmd);
+		return iscsit_reject_cmd(cmd, ISCSI_REASON_BOOKMARK_INVALID, buf);
 	}
 
 	if (cmd->unsolicited_data) {
@@ -1543,8 +1515,8 @@
 	if (hdr->itt == RESERVED_ITT && !(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
 		pr_err("NOPOUT ITT is reserved, but Immediate Bit is"
 			" not set, protocol error.\n");
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-					1, 0, (unsigned char *)hdr, cmd);
+		return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
+					 (unsigned char *)hdr);
 	}
 
 	if (payload_length > conn->conn_ops->MaxXmitDataSegmentLength) {
@@ -1552,8 +1524,8 @@
 			" greater than MaxXmitDataSegmentLength: %u, protocol"
 			" error.\n", payload_length,
 			conn->conn_ops->MaxXmitDataSegmentLength);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-					1, 0, (unsigned char *)hdr, cmd);
+		return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
+					 (unsigned char *)hdr);
 	}
 
 	pr_debug("Got NOPOUT Ping %s ITT: 0x%08x, TTT: 0x%08x,"
@@ -1612,9 +1584,7 @@
 			return 0;
 
 		if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
-			return iscsit_add_reject_from_cmd(
-					ISCSI_REASON_PROTOCOL_ERROR,
-					1, 0, (unsigned char *)hdr, cmd);
+			return -1;
 
 		return 0;
 	}
@@ -1780,8 +1750,8 @@
 		pr_err("Task Management Request TASK_REASSIGN not"
 			" issued as immediate command, bad iSCSI Initiator"
 				"implementation\n");
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-					1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_PROTOCOL_ERROR, buf);
 	}
 	if ((function != ISCSI_TM_FUNC_ABORT_TASK) &&
 	    be32_to_cpu(hdr->refcmdsn) != ISCSI_RESERVED_TAG)
@@ -1793,9 +1763,9 @@
 	if (!cmd->tmr_req) {
 		pr_err("Unable to allocate memory for"
 			" Task Management command!\n");
-		return iscsit_add_reject_from_cmd(
-			ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-			1, 1, buf, cmd);
+		return iscsit_add_reject_cmd(cmd,
+					     ISCSI_REASON_BOOKMARK_NO_RESOURCES,
+					     buf);
 	}
 
 	/*
@@ -1837,17 +1807,15 @@
 		default:
 			pr_err("Unknown iSCSI TMR Function:"
 			       " 0x%02x\n", function);
-			return iscsit_add_reject_from_cmd(
-				ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-				1, 1, buf, cmd);
+			return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 		}
 
 		ret = core_tmr_alloc_req(&cmd->se_cmd, cmd->tmr_req,
 					 tcm_function, GFP_KERNEL);
 		if (ret < 0)
-			return iscsit_add_reject_from_cmd(
-				ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-				1, 1, buf, cmd);
+			return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 
 		cmd->tmr_req->se_tmr_req = cmd->se_cmd.se_tmr_req;
 	}
@@ -1906,9 +1874,8 @@
 			break;
 
 		if (iscsit_check_task_reassign_expdatasn(tmr_req, conn) < 0)
-			return iscsit_add_reject_from_cmd(
-					ISCSI_REASON_BOOKMARK_INVALID, 1, 1,
-					buf, cmd);
+			return iscsit_add_reject_cmd(cmd,
+					ISCSI_REASON_BOOKMARK_INVALID, buf);
 		break;
 	default:
 		pr_err("Unknown TMR function: 0x%02x, protocol"
@@ -1932,9 +1899,7 @@
 		else if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
 			return 0;
 		else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
-			return iscsit_add_reject_from_cmd(
-					ISCSI_REASON_PROTOCOL_ERROR,
-					1, 0, buf, cmd);
+			return -1;
 	}
 	iscsit_ack_from_expstatsn(conn, be32_to_cpu(hdr->exp_statsn));
 
@@ -1970,8 +1935,8 @@
 		pr_err("Unable to accept text parameter length: %u"
 			"greater than MaxXmitDataSegmentLength %u.\n",
 		       payload_length, conn->conn_ops->MaxXmitDataSegmentLength);
-		return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-					1, 0, (unsigned char *)hdr, cmd);
+		return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
+					 (unsigned char *)hdr);
 	}
 
 	pr_debug("Got Text Request: ITT: 0x%08x, CmdSN: 0x%08x,"
@@ -2033,17 +1998,16 @@
 	if (!(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
 		cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
 		if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
-			return iscsit_add_reject_from_cmd(
-					ISCSI_REASON_PROTOCOL_ERROR,
-					1, 0, (unsigned char *)hdr, cmd);
+			return -1;
+
 		return 0;
 	}
 
 	return iscsit_execute_cmd(cmd, 0);
 
 reject:
-	return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-					  0, 0, (unsigned char *)hdr, cmd);
+	return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
+				 (unsigned char *)hdr);
 }
 EXPORT_SYMBOL(iscsit_process_text_cmd);
 
@@ -2139,8 +2103,7 @@
 reject:
 	kfree(cmd->text_in_ptr);
 	cmd->text_in_ptr = NULL;
-	return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
-					  0, 0, buf, cmd);
+	return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR, buf);
 }
 EXPORT_SYMBOL(iscsit_handle_text_cmd);
 
@@ -2322,13 +2285,10 @@
 			return ret;
 	} else {
 		cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
-		if (cmdsn_ret == CMDSN_LOWER_THAN_EXP) {
+		if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
 			logout_remove = 0;
-		} else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER) {
-			return iscsit_add_reject_from_cmd(
-				ISCSI_REASON_PROTOCOL_ERROR,
-				1, 0, buf, cmd);
-		}
+		else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
+			return -1;
 	}
 
 	return logout_remove;
@@ -2352,8 +2312,8 @@
 	if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
 		pr_err("Initiator sent SNACK request while in"
 			" ErrorRecoveryLevel=0.\n");
-		return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
-					buf, conn);
+		return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+					 buf);
 	}
 	/*
 	 * SNACK_DATA and SNACK_R2T are both 0,  so check which function to
@@ -2377,13 +2337,13 @@
 	case ISCSI_FLAG_SNACK_TYPE_RDATA:
 		/* FIXME: Support R-Data SNACK */
 		pr_err("R-Data SNACK Not Supported.\n");
-		return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
-					buf, conn);
+		return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+					 buf);
 	default:
 		pr_err("Unknown SNACK type 0x%02x, protocol"
 			" error.\n", hdr->flags & 0x0f);
-		return iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
-					buf, conn);
+		return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+					 buf);
 	}
 
 	return 0;
@@ -2455,14 +2415,14 @@
 				pr_err("Unable to recover from"
 					" Immediate Data digest failure while"
 					" in ERL=0.\n");
-				iscsit_add_reject_from_cmd(
+				iscsit_reject_cmd(cmd,
 						ISCSI_REASON_DATA_DIGEST_ERROR,
-						1, 0, (unsigned char *)hdr, cmd);
+						(unsigned char *)hdr);
 				return IMMEDIATE_DATA_CANNOT_RECOVER;
 			} else {
-				iscsit_add_reject_from_cmd(
+				iscsit_reject_cmd(cmd,
 						ISCSI_REASON_DATA_DIGEST_ERROR,
-						0, 0, (unsigned char *)hdr, cmd);
+						(unsigned char *)hdr);
 				return IMMEDIATE_DATA_ERL1_CRC_FAILURE;
 			}
 		} else {
@@ -3595,6 +3555,7 @@
 		    struct iscsi_reject *hdr)
 {
 	hdr->opcode		= ISCSI_OP_REJECT;
+	hdr->reason		= cmd->reject_reason;
 	hdr->flags		|= ISCSI_FLAG_CMD_FINAL;
 	hton24(hdr->dlength, ISCSI_HDR_LEN);
 	hdr->ffffffff		= cpu_to_be32(0xffffffff);
@@ -3868,18 +3829,11 @@
 	case ISTATE_SEND_STATUS_RECOVERY:
 	case ISTATE_SEND_TEXTRSP:
 	case ISTATE_SEND_TASKMGTRSP:
+	case ISTATE_SEND_REJECT:
 		spin_lock_bh(&cmd->istate_lock);
 		cmd->i_state = ISTATE_SENT_STATUS;
 		spin_unlock_bh(&cmd->istate_lock);
 		break;
-	case ISTATE_SEND_REJECT:
-		if (cmd->cmd_flags & ICF_REJECT_FAIL_CONN) {
-			cmd->cmd_flags &= ~ICF_REJECT_FAIL_CONN;
-			complete(&cmd->reject_comp);
-			goto err;
-		}
-		complete(&cmd->reject_comp);
-		break;
 	default:
 		pr_err("Unknown Opcode: 0x%02x ITT:"
 		       " 0x%08x, i_state: %d on CID: %hu\n",
@@ -3984,8 +3938,7 @@
 	case ISCSI_OP_SCSI_CMD:
 		cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
 		if (!cmd)
-			return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-						1, buf, conn);
+			goto reject;
 
 		ret = iscsit_handle_scsi_cmd(conn, cmd, buf);
 		break;
@@ -3997,32 +3950,28 @@
 		if (hdr->ttt == cpu_to_be32(0xFFFFFFFF)) {
 			cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
 			if (!cmd)
-				return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-						1, buf, conn);
+				goto reject;
 		}
 		ret = iscsit_handle_nop_out(conn, cmd, buf);
 		break;
 	case ISCSI_OP_SCSI_TMFUNC:
 		cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
 		if (!cmd)
-			return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-						1, buf, conn);
+			goto reject;
 
 		ret = iscsit_handle_task_mgt_cmd(conn, cmd, buf);
 		break;
 	case ISCSI_OP_TEXT:
 		cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
 		if (!cmd)
-			return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-						1, buf, conn);
+			goto reject;
 
 		ret = iscsit_handle_text_cmd(conn, cmd, buf);
 		break;
 	case ISCSI_OP_LOGOUT:
 		cmd = iscsit_allocate_cmd(conn, GFP_KERNEL);
 		if (!cmd)
-			return iscsit_add_reject(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
-						1, buf, conn);
+			goto reject;
 
 		ret = iscsit_handle_logout_cmd(conn, cmd, buf);
 		if (ret > 0)
@@ -4054,6 +4003,8 @@
 	}
 
 	return ret;
+reject:
+	return iscsit_add_reject(conn, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
 }
 
 int iscsi_target_rx_thread(void *arg)
@@ -4148,8 +4099,8 @@
 		    (!(opcode & ISCSI_OP_LOGOUT)))) {
 			pr_err("Received illegal iSCSI Opcode: 0x%02x"
 			" while in Discovery Session, rejecting.\n", opcode);
-			iscsit_add_reject(ISCSI_REASON_PROTOCOL_ERROR, 1,
-					buffer, conn);
+			iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+					  buffer);
 			goto transport_err;
 		}