drivers/media/rc/streamzap.c - kernel/msm-4.9 - Gitiles

 /*
  * Streamzap Remote Control driver
  *
  * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
  * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
  *
  * This driver was based on the work of Greg Wickham and Adrian
  * Dewhurst. It was substantially rewritten to support correct signal
  * gaps and now maintains a delay buffer, which is used to present
  * consistent timing behaviour to user space applications. Without the
  * delay buffer an ugly hack would be required in lircd, which can
  * cause sluggish signal decoding in certain situations.
  *
  * Ported to in-kernel ir-core interface by Jarod Wilson
  *
  * This driver is based on the USB skeleton driver packaged with the
  * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */

 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
 #include <media/rc-core.h>

 #define DRIVER_VERSION	"1.61"
 #define DRIVER_NAME	"streamzap"
 #define DRIVER_DESC	"Streamzap Remote Control driver"

 #ifdef CONFIG_USB_DEBUG
 static bool debug = 1;
 #else
 static bool debug;
 #endif

 #define USB_STREAMZAP_VENDOR_ID		0x0e9c
 #define USB_STREAMZAP_PRODUCT_ID	0x0000

 /* table of devices that work with this driver */
 static struct usb_device_id streamzap_table[] = {
 	/* Streamzap Remote Control */
 	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
 	/* Terminating entry */
 	{ }
 };

 MODULE_DEVICE_TABLE(usb, streamzap_table);

 #define SZ_PULSE_MASK 0xf0
 #define SZ_SPACE_MASK 0x0f
 #define SZ_TIMEOUT    0xff
 #define SZ_RESOLUTION 256

 /* number of samples buffered */
 #define SZ_BUF_LEN 128

 /* from ir-rc5-sz-decoder.c */
 #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
 #define load_rc5_sz_decode()    request_module("ir-rc5-sz-decoder")
 #else
 #define load_rc5_sz_decode()    {}
 #endif

 enum StreamzapDecoderState {
 	PulseSpace,
 	FullPulse,
 	FullSpace,
 	IgnorePulse
 };

 /* structure to hold our device specific stuff */
 struct streamzap_ir {
 	/* ir-core */
 	struct rc_dev *rdev;

 	/* core device info */
 	struct device *dev;

 	/* usb */
 	struct usb_device	*usbdev;
 	struct usb_interface	*interface;
 	struct usb_endpoint_descriptor *endpoint;
 	struct urb		*urb_in;

 	/* buffer & dma */
 	unsigned char		*buf_in;
 	dma_addr_t		dma_in;
 	unsigned int		buf_in_len;

 	/* track what state we're in */
 	enum StreamzapDecoderState decoder_state;
 	/* tracks whether we are currently receiving some signal */
 	bool			idle;
 	/* sum of signal lengths received since signal start */
 	unsigned long		sum;
 	/* start time of signal; necessary for gap tracking */
 	struct timeval		signal_last;
 	struct timeval		signal_start;
 	bool			timeout_enabled;

 	char			name[128];
 	char			phys[64];
 };


 /* local function prototypes */
 static int streamzap_probe(struct usb_interface *interface,
 			   const struct usb_device_id *id);
 static void streamzap_disconnect(struct usb_interface *interface);
 static void streamzap_callback(struct urb *urb);
 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
 static int streamzap_resume(struct usb_interface *intf);

 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver streamzap_driver = {
 	.name =		DRIVER_NAME,
 	.probe =	streamzap_probe,
 	.disconnect =	streamzap_disconnect,
 	.suspend =	streamzap_suspend,
 	.resume =	streamzap_resume,
 	.id_table =	streamzap_table,
 };

 static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
 {
 	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
 		(rawir.pulse ? "pulse" : "space"), rawir.duration);
 	ir_raw_event_store_with_filter(sz->rdev, &rawir);
 }

 static void sz_push_full_pulse(struct streamzap_ir *sz,
 			       unsigned char value)
 {
 	DEFINE_IR_RAW_EVENT(rawir);

 	if (sz->idle) {
 		long deltv;

 		sz->signal_last = sz->signal_start;
 		do_gettimeofday(&sz->signal_start);

 		deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
 		rawir.pulse = false;
 		if (deltv > 15) {
 			/* really long time */
 			rawir.duration = IR_MAX_DURATION;
 		} else {
 			rawir.duration = (int)(deltv * 1000000 +
 				sz->signal_start.tv_usec -
 				sz->signal_last.tv_usec);
 			rawir.duration -= sz->sum;
 			rawir.duration = US_TO_NS(rawir.duration);
 			rawir.duration &= IR_MAX_DURATION;
 		}
 		sz_push(sz, rawir);

 		sz->idle = false;
 		sz->sum = 0;
 	}

 	rawir.pulse = true;
 	rawir.duration = ((int) value) * SZ_RESOLUTION;
 	rawir.duration += SZ_RESOLUTION / 2;
 	sz->sum += rawir.duration;
 	rawir.duration = US_TO_NS(rawir.duration);
 	rawir.duration &= IR_MAX_DURATION;
 	sz_push(sz, rawir);
 }

 static void sz_push_half_pulse(struct streamzap_ir *sz,
 			       unsigned char value)
 {
 	sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
 }

 static void sz_push_full_space(struct streamzap_ir *sz,
 			       unsigned char value)
 {
 	DEFINE_IR_RAW_EVENT(rawir);

 	rawir.pulse = false;
 	rawir.duration = ((int) value) * SZ_RESOLUTION;
 	rawir.duration += SZ_RESOLUTION / 2;
 	sz->sum += rawir.duration;
 	rawir.duration = US_TO_NS(rawir.duration);
 	sz_push(sz, rawir);
 }

 static void sz_push_half_space(struct streamzap_ir *sz,
 			       unsigned long value)
 {
 	sz_push_full_space(sz, value & SZ_SPACE_MASK);
 }

 /**
  * streamzap_callback - usb IRQ handler callback
  *
  * This procedure is invoked on reception of data from
  * the usb remote.
  */
 static void streamzap_callback(struct urb *urb)
 {
 	struct streamzap_ir *sz;
 	unsigned int i;
 	int len;

 	if (!urb)
 		return;

 	sz = urb->context;
 	len = urb->actual_length;

 	switch (urb->status) {
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/*
 		 * this urb is terminated, clean up.
 		 * sz might already be invalid at this point
 		 */
 		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
 		return;
 	default:
 		break;
 	}

 	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
 	for (i = 0; i < len; i++) {
 		dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
 			i, (unsigned char)sz->buf_in[i]);
 		switch (sz->decoder_state) {
 		case PulseSpace:
 			if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
 				SZ_PULSE_MASK) {
 				sz->decoder_state = FullPulse;
 				continue;
 			} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
 					== SZ_SPACE_MASK) {
 				sz_push_half_pulse(sz, sz->buf_in[i]);
 				sz->decoder_state = FullSpace;
 				continue;
 			} else {
 				sz_push_half_pulse(sz, sz->buf_in[i]);
 				sz_push_half_space(sz, sz->buf_in[i]);
 			}
 			break;
 		case FullPulse:
 			sz_push_full_pulse(sz, sz->buf_in[i]);
 			sz->decoder_state = IgnorePulse;
 			break;
 		case FullSpace:
 			if (sz->buf_in[i] == SZ_TIMEOUT) {
 				DEFINE_IR_RAW_EVENT(rawir);

 				rawir.pulse = false;
 				rawir.duration = sz->rdev->timeout;
 				sz->idle = true;
 				if (sz->timeout_enabled)
 					sz_push(sz, rawir);
 				ir_raw_event_handle(sz->rdev);
 				ir_raw_event_reset(sz->rdev);
 			} else {
 				sz_push_full_space(sz, sz->buf_in[i]);
 			}
 			sz->decoder_state = PulseSpace;
 			break;
 		case IgnorePulse:
 			if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
 				SZ_SPACE_MASK) {
 				sz->decoder_state = FullSpace;
 				continue;
 			}
 			sz_push_half_space(sz, sz->buf_in[i]);
 			sz->decoder_state = PulseSpace;
 			break;
 		}
 	}

 	ir_raw_event_handle(sz->rdev);
 	usb_submit_urb(urb, GFP_ATOMIC);

 	return;
 }

 static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
 {
 	struct rc_dev *rdev;
 	struct device *dev = sz->dev;
 	int ret;

 	rdev = rc_allocate_device();
 	if (!rdev) {
 		dev_err(dev, "remote dev allocation failed\n");
 		goto out;
 	}

 	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
 		 "Receiver (%04x:%04x)",
 		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
 		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
 	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
 	strlcat(sz->phys, "/input0", sizeof(sz->phys));

 	rdev->input_name = sz->name;
 	rdev->input_phys = sz->phys;
 	usb_to_input_id(sz->usbdev, &rdev->input_id);
 	rdev->dev.parent = dev;
 	rdev->priv = sz;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
 	rdev->allowed_protos = RC_TYPE_ALL;
 	rdev->driver_name = DRIVER_NAME;
 	rdev->map_name = RC_MAP_STREAMZAP;

 	ret = rc_register_device(rdev);
 	if (ret < 0) {
 		dev_err(dev, "remote input device register failed\n");
 		goto out;
 	}

 	return rdev;

 out:
 	rc_free_device(rdev);
 	return NULL;
 }

 /**
  *	streamzap_probe
  *
  *	Called by usb-core to associated with a candidate device
  *	On any failure the return value is the ERROR
  *	On success return 0
  */
 static int __devinit streamzap_probe(struct usb_interface *intf,
 				     const struct usb_device_id *id)
 {
 	struct usb_device *usbdev = interface_to_usbdev(intf);
 	struct usb_host_interface *iface_host;
 	struct streamzap_ir *sz = NULL;
 	char buf[63], name[128] = "";
 	int retval = -ENOMEM;
 	int pipe, maxp;

 	/* Allocate space for device driver specific data */
 	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
 	if (!sz)
 		return -ENOMEM;

 	sz->usbdev = usbdev;
 	sz->interface = intf;

 	/* Check to ensure endpoint information matches requirements */
 	iface_host = intf->cur_altsetting;

 	if (iface_host->desc.bNumEndpoints != 1) {
 		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
 			__func__, iface_host->desc.bNumEndpoints);
 		retval = -ENODEV;
 		goto free_sz;
 	}

 	sz->endpoint = &(iface_host->endpoint[0].desc);
 	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
 	    != USB_DIR_IN) {
 		dev_err(&intf->dev, "%s: endpoint doesn't match input device "
 			"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
 		retval = -ENODEV;
 		goto free_sz;
 	}

 	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
 	    != USB_ENDPOINT_XFER_INT) {
 		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
 			"02%02x\n", __func__, sz->endpoint->bmAttributes);
 		retval = -ENODEV;
 		goto free_sz;
 	}

 	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
 	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));

 	if (maxp == 0) {
 		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
 			__func__);
 		retval = -ENODEV;
 		goto free_sz;
 	}

 	/* Allocate the USB buffer and IRQ URB */
 	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
 	if (!sz->buf_in)
 		goto free_sz;

 	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
 	if (!sz->urb_in)
 		goto free_buf_in;

 	sz->dev = &intf->dev;
 	sz->buf_in_len = maxp;

 	if (usbdev->descriptor.iManufacturer
 	    && usb_string(usbdev, usbdev->descriptor.iManufacturer,
 			  buf, sizeof(buf)) > 0)
 		strlcpy(name, buf, sizeof(name));

 	if (usbdev->descriptor.iProduct
 	    && usb_string(usbdev, usbdev->descriptor.iProduct,
 			  buf, sizeof(buf)) > 0)
 		snprintf(name + strlen(name), sizeof(name) - strlen(name),
 			 " %s", buf);

 	sz->rdev = streamzap_init_rc_dev(sz);
 	if (!sz->rdev)
 		goto rc_dev_fail;

 	sz->idle = true;
 	sz->decoder_state = PulseSpace;
 	/* FIXME: don't yet have a way to set this */
 	sz->timeout_enabled = true;
 	sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) &
 				IR_MAX_DURATION) | 0x03000000);
 	#if 0
 	/* not yet supported, depends on patches from maxim */
 	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
 	sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
 	sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
 	#endif

 	do_gettimeofday(&sz->signal_start);

 	/* Complete final initialisations */
 	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
 			 maxp, (usb_complete_t)streamzap_callback,
 			 sz, sz->endpoint->bInterval);
 	sz->urb_in->transfer_dma = sz->dma_in;
 	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

 	usb_set_intfdata(intf, sz);

 	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
 		dev_err(sz->dev, "urb submit failed\n");

 	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
 		 usbdev->bus->busnum, usbdev->devnum);

 	/* Load the streamzap not-quite-rc5 decoder too */
 	load_rc5_sz_decode();

 	return 0;

 rc_dev_fail:
 	usb_free_urb(sz->urb_in);
 free_buf_in:
 	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
 free_sz:
 	kfree(sz);

 	return retval;
 }

 /**
  * streamzap_disconnect
  *
  * Called by the usb core when the device is removed from the system.
  *
  * This routine guarantees that the driver will not submit any more urbs
  * by clearing dev->usbdev.  It is also supposed to terminate any currently
  * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
  * does not provide any way to do this.
  */
 static void streamzap_disconnect(struct usb_interface *interface)
 {
 	struct streamzap_ir *sz = usb_get_intfdata(interface);
 	struct usb_device *usbdev = interface_to_usbdev(interface);

 	usb_set_intfdata(interface, NULL);

 	if (!sz)
 		return;

 	sz->usbdev = NULL;
 	rc_unregister_device(sz->rdev);
 	usb_kill_urb(sz->urb_in);
 	usb_free_urb(sz->urb_in);
 	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);

 	kfree(sz);
 }

 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct streamzap_ir *sz = usb_get_intfdata(intf);

 	usb_kill_urb(sz->urb_in);

 	return 0;
 }

 static int streamzap_resume(struct usb_interface *intf)
 {
 	struct streamzap_ir *sz = usb_get_intfdata(intf);

 	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
 		dev_err(sz->dev, "Error sumbiting urb\n");
 		return -EIO;
 	}

 	return 0;
 }

 module_usb_driver(streamzap_driver);

 MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");

 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging messages");
	/*
	* Streamzap Remote Control driver
	*
	* Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
	* Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
	*
	* This driver was based on the work of Greg Wickham and Adrian
	* Dewhurst. It was substantially rewritten to support correct signal
	* gaps and now maintains a delay buffer, which is used to present
	* consistent timing behaviour to user space applications. Without the
	* delay buffer an ugly hack would be required in lircd, which can
	* cause sluggish signal decoding in certain situations.
	*
	* Ported to in-kernel ir-core interface by Jarod Wilson
	*
	* This driver is based on the USB skeleton driver packaged with the
	* kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#include <linux/device.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/usb.h>
	#include <linux/usb/input.h>
	#include <media/rc-core.h>

	#define DRIVER_VERSION "1.61"
	#define DRIVER_NAME "streamzap"
	#define DRIVER_DESC "Streamzap Remote Control driver"

	#ifdef CONFIG_USB_DEBUG
	static bool debug = 1;
	#else
	static bool debug;
	#endif

	#define USB_STREAMZAP_VENDOR_ID 0x0e9c
	#define USB_STREAMZAP_PRODUCT_ID 0x0000

	/* table of devices that work with this driver */
	static struct usb_device_id streamzap_table[] = {
	/* Streamzap Remote Control */
	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
	/* Terminating entry */
	{ }
	};

	MODULE_DEVICE_TABLE(usb, streamzap_table);

	#define SZ_PULSE_MASK 0xf0
	#define SZ_SPACE_MASK 0x0f
	#define SZ_TIMEOUT 0xff
	#define SZ_RESOLUTION 256

	/* number of samples buffered */
	#define SZ_BUF_LEN 128

	/* from ir-rc5-sz-decoder.c */
	#ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
	#define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder")
	#else
	#define load_rc5_sz_decode() {}
	#endif

	enum StreamzapDecoderState {
	PulseSpace,
	FullPulse,
	FullSpace,
	IgnorePulse
	};

	/* structure to hold our device specific stuff */
	struct streamzap_ir {
	/* ir-core */
	struct rc_dev *rdev;

	/* core device info */
	struct device *dev;

	/* usb */
	struct usb_device *usbdev;
	struct usb_interface *interface;
	struct usb_endpoint_descriptor *endpoint;
	struct urb *urb_in;

	/* buffer & dma */
	unsigned char *buf_in;
	dma_addr_t dma_in;
	unsigned int buf_in_len;

	/* track what state we're in */
	enum StreamzapDecoderState decoder_state;
	/* tracks whether we are currently receiving some signal */
	bool idle;
	/* sum of signal lengths received since signal start */
	unsigned long sum;
	/* start time of signal; necessary for gap tracking */
	struct timeval signal_last;
	struct timeval signal_start;
	bool timeout_enabled;

	char name[128];
	char phys[64];
	};


	/* local function prototypes */
	static int streamzap_probe(struct usb_interface *interface,
	const struct usb_device_id *id);
	static void streamzap_disconnect(struct usb_interface *interface);
	static void streamzap_callback(struct urb *urb);
	static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
	static int streamzap_resume(struct usb_interface *intf);

	/* usb specific object needed to register this driver with the usb subsystem */
	static struct usb_driver streamzap_driver = {
	.name = DRIVER_NAME,
	.probe = streamzap_probe,
	.disconnect = streamzap_disconnect,
	.suspend = streamzap_suspend,
	.resume = streamzap_resume,
	.id_table = streamzap_table,
	};

	static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
	{
	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
	(rawir.pulse ? "pulse" : "space"), rawir.duration);
	ir_raw_event_store_with_filter(sz->rdev, &rawir);
	}

	static void sz_push_full_pulse(struct streamzap_ir *sz,
	unsigned char value)
	{
	DEFINE_IR_RAW_EVENT(rawir);

	if (sz->idle) {
	long deltv;

	sz->signal_last = sz->signal_start;
	do_gettimeofday(&sz->signal_start);

	deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
	rawir.pulse = false;
	if (deltv > 15) {
	/* really long time */
	rawir.duration = IR_MAX_DURATION;
	} else {
	rawir.duration = (int)(deltv * 1000000 +
	sz->signal_start.tv_usec -
	sz->signal_last.tv_usec);
	rawir.duration -= sz->sum;
	rawir.duration = US_TO_NS(rawir.duration);
	rawir.duration &= IR_MAX_DURATION;
	}
	sz_push(sz, rawir);

	sz->idle = false;
	sz->sum = 0;
	}

	rawir.pulse = true;
	rawir.duration = ((int) value) * SZ_RESOLUTION;
	rawir.duration += SZ_RESOLUTION / 2;
	sz->sum += rawir.duration;
	rawir.duration = US_TO_NS(rawir.duration);
	rawir.duration &= IR_MAX_DURATION;
	sz_push(sz, rawir);
	}

	static void sz_push_half_pulse(struct streamzap_ir *sz,
	unsigned char value)
	{
	sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
	}

	static void sz_push_full_space(struct streamzap_ir *sz,
	unsigned char value)
	{
	DEFINE_IR_RAW_EVENT(rawir);

	rawir.pulse = false;
	rawir.duration = ((int) value) * SZ_RESOLUTION;
	rawir.duration += SZ_RESOLUTION / 2;
	sz->sum += rawir.duration;
	rawir.duration = US_TO_NS(rawir.duration);
	sz_push(sz, rawir);
	}

	static void sz_push_half_space(struct streamzap_ir *sz,
	unsigned long value)
	{
	sz_push_full_space(sz, value & SZ_SPACE_MASK);
	}

	/**
	* streamzap_callback - usb IRQ handler callback
	*
	* This procedure is invoked on reception of data from
	* the usb remote.
	*/
	static void streamzap_callback(struct urb *urb)
	{
	struct streamzap_ir *sz;
	unsigned int i;
	int len;

	if (!urb)
	return;

	sz = urb->context;
	len = urb->actual_length;

	switch (urb->status) {
	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
	/*
	* this urb is terminated, clean up.
	* sz might already be invalid at this point
	*/
	dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
	return;
	default:
	break;
	}

	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
	for (i = 0; i < len; i++) {
	dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
	i, (unsigned char)sz->buf_in[i]);
	switch (sz->decoder_state) {
	case PulseSpace:
	if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
	SZ_PULSE_MASK) {
	sz->decoder_state = FullPulse;
	continue;
	} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
	== SZ_SPACE_MASK) {
	sz_push_half_pulse(sz, sz->buf_in[i]);
	sz->decoder_state = FullSpace;
	continue;
	} else {
	sz_push_half_pulse(sz, sz->buf_in[i]);
	sz_push_half_space(sz, sz->buf_in[i]);
	}
	break;
	case FullPulse:
	sz_push_full_pulse(sz, sz->buf_in[i]);
	sz->decoder_state = IgnorePulse;
	break;
	case FullSpace:
	if (sz->buf_in[i] == SZ_TIMEOUT) {
	DEFINE_IR_RAW_EVENT(rawir);

	rawir.pulse = false;
	rawir.duration = sz->rdev->timeout;
	sz->idle = true;
	if (sz->timeout_enabled)
	sz_push(sz, rawir);
	ir_raw_event_handle(sz->rdev);
	ir_raw_event_reset(sz->rdev);
	} else {
	sz_push_full_space(sz, sz->buf_in[i]);
	}
	sz->decoder_state = PulseSpace;
	break;
	case IgnorePulse:
	if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
	SZ_SPACE_MASK) {
	sz->decoder_state = FullSpace;
	continue;
	}
	sz_push_half_space(sz, sz->buf_in[i]);
	sz->decoder_state = PulseSpace;
	break;
	}
	}

	ir_raw_event_handle(sz->rdev);
	usb_submit_urb(urb, GFP_ATOMIC);

	return;
	}

	static struct rc_dev streamzap_init_rc_dev(struct streamzap_ir sz)
	{
	struct rc_dev *rdev;
	struct device *dev = sz->dev;
	int ret;

	rdev = rc_allocate_device();
	if (!rdev) {
	dev_err(dev, "remote dev allocation failed\n");
	goto out;
	}

	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
	"Receiver (%04x:%04x)",
	le16_to_cpu(sz->usbdev->descriptor.idVendor),
	le16_to_cpu(sz->usbdev->descriptor.idProduct));
	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
	strlcat(sz->phys, "/input0", sizeof(sz->phys));

	rdev->input_name = sz->name;
	rdev->input_phys = sz->phys;
	usb_to_input_id(sz->usbdev, &rdev->input_id);
	rdev->dev.parent = dev;
	rdev->priv = sz;
	rdev->driver_type = RC_DRIVER_IR_RAW;
	rdev->allowed_protos = RC_TYPE_ALL;
	rdev->driver_name = DRIVER_NAME;
	rdev->map_name = RC_MAP_STREAMZAP;

	ret = rc_register_device(rdev);
	if (ret < 0) {
	dev_err(dev, "remote input device register failed\n");
	goto out;
	}

	return rdev;

	out:
	rc_free_device(rdev);
	return NULL;
	}

	/**
	* streamzap_probe
	*
	* Called by usb-core to associated with a candidate device
	* On any failure the return value is the ERROR
	* On success return 0
	*/
	static int __devinit streamzap_probe(struct usb_interface *intf,
	const struct usb_device_id *id)
	{
	struct usb_device *usbdev = interface_to_usbdev(intf);
	struct usb_host_interface *iface_host;
	struct streamzap_ir *sz = NULL;
	char buf[63], name[128] = "";
	int retval = -ENOMEM;
	int pipe, maxp;

	/* Allocate space for device driver specific data */
	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
	if (!sz)
	return -ENOMEM;

	sz->usbdev = usbdev;
	sz->interface = intf;

	/* Check to ensure endpoint information matches requirements */
	iface_host = intf->cur_altsetting;

	if (iface_host->desc.bNumEndpoints != 1) {
	dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
	__func__, iface_host->desc.bNumEndpoints);
	retval = -ENODEV;
	goto free_sz;
	}

	sz->endpoint = &(iface_host->endpoint[0].desc);
	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
	!= USB_DIR_IN) {
	dev_err(&intf->dev, "%s: endpoint doesn't match input device "
	"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
	retval = -ENODEV;
	goto free_sz;
	}

	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
	!= USB_ENDPOINT_XFER_INT) {
	dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
	"02%02x\n", __func__, sz->endpoint->bmAttributes);
	retval = -ENODEV;
	goto free_sz;
	}

	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));

	if (maxp == 0) {
	dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
	__func__);
	retval = -ENODEV;
	goto free_sz;
	}

	/* Allocate the USB buffer and IRQ URB */
	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
	if (!sz->buf_in)
	goto free_sz;

	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
	if (!sz->urb_in)
	goto free_buf_in;

	sz->dev = &intf->dev;
	sz->buf_in_len = maxp;

	if (usbdev->descriptor.iManufacturer
	&& usb_string(usbdev, usbdev->descriptor.iManufacturer,
	buf, sizeof(buf)) > 0)
	strlcpy(name, buf, sizeof(name));

	if (usbdev->descriptor.iProduct
	&& usb_string(usbdev, usbdev->descriptor.iProduct,
	buf, sizeof(buf)) > 0)
	snprintf(name + strlen(name), sizeof(name) - strlen(name),
	" %s", buf);

	sz->rdev = streamzap_init_rc_dev(sz);
	if (!sz->rdev)
	goto rc_dev_fail;

	sz->idle = true;
	sz->decoder_state = PulseSpace;
	/* FIXME: don't yet have a way to set this */
	sz->timeout_enabled = true;
	sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) &
	IR_MAX_DURATION) \| 0x03000000);
	#if 0
	/* not yet supported, depends on patches from maxim */
	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
	sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
	sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
	#endif

	do_gettimeofday(&sz->signal_start);

	/* Complete final initialisations */
	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
	maxp, (usb_complete_t)streamzap_callback,
	sz, sz->endpoint->bInterval);
	sz->urb_in->transfer_dma = sz->dma_in;
	sz->urb_in->transfer_flags \|= URB_NO_TRANSFER_DMA_MAP;

	usb_set_intfdata(intf, sz);

	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
	dev_err(sz->dev, "urb submit failed\n");

	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
	usbdev->bus->busnum, usbdev->devnum);

	/* Load the streamzap not-quite-rc5 decoder too */
	load_rc5_sz_decode();

	return 0;

	rc_dev_fail:
	usb_free_urb(sz->urb_in);
	free_buf_in:
	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
	free_sz:
	kfree(sz);

	return retval;
	}

	/**
	* streamzap_disconnect
	*
	* Called by the usb core when the device is removed from the system.
	*
	* This routine guarantees that the driver will not submit any more urbs
	* by clearing dev->usbdev. It is also supposed to terminate any currently
	* active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
	* does not provide any way to do this.
	*/
	static void streamzap_disconnect(struct usb_interface *interface)
	{
	struct streamzap_ir *sz = usb_get_intfdata(interface);
	struct usb_device *usbdev = interface_to_usbdev(interface);

	usb_set_intfdata(interface, NULL);

	if (!sz)
	return;

	sz->usbdev = NULL;
	rc_unregister_device(sz->rdev);
	usb_kill_urb(sz->urb_in);
	usb_free_urb(sz->urb_in);
	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);

	kfree(sz);
	}

	static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
	{
	struct streamzap_ir *sz = usb_get_intfdata(intf);

	usb_kill_urb(sz->urb_in);

	return 0;
	}

	static int streamzap_resume(struct usb_interface *intf)
	{
	struct streamzap_ir *sz = usb_get_intfdata(intf);

	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
	dev_err(sz->dev, "Error sumbiting urb\n");
	return -EIO;
	}

	return 0;
	}

	module_usb_driver(streamzap_driver);

	MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_LICENSE("GPL");

	module_param(debug, bool, S_IRUGO \| S_IWUSR);
	MODULE_PARM_DESC(debug, "Enable debugging messages");