blob: 99d9a3b1bf34bedddb62e51a220d93088bab3542 [file] [log] [blame]
/*
* linux/arch/arm/mach-sa1100/neponset.c
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_data/sa11x0-serial.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/smc91x.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/hardware/sa1111.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
#include <mach/assabet.h>
#include <mach/neponset.h>
#include <mach/irqs.h>
#define NEP_IRQ_SMC91X 0
#define NEP_IRQ_USAR 1
#define NEP_IRQ_SA1111 2
#define NEP_IRQ_NR 3
#define WHOAMI 0x00
#define LEDS 0x10
#define SWPK 0x20
#define IRR 0x24
#define KP_Y_IN 0x80
#define KP_X_OUT 0x90
#define NCR_0 0xa0
#define MDM_CTL_0 0xb0
#define MDM_CTL_1 0xb4
#define AUD_CTL 0xc0
#define IRR_ETHERNET (1 << 0)
#define IRR_USAR (1 << 1)
#define IRR_SA1111 (1 << 2)
#define MDM_CTL0_RTS1 (1 << 0)
#define MDM_CTL0_DTR1 (1 << 1)
#define MDM_CTL0_RTS2 (1 << 2)
#define MDM_CTL0_DTR2 (1 << 3)
#define MDM_CTL1_CTS1 (1 << 0)
#define MDM_CTL1_DSR1 (1 << 1)
#define MDM_CTL1_DCD1 (1 << 2)
#define MDM_CTL1_CTS2 (1 << 3)
#define MDM_CTL1_DSR2 (1 << 4)
#define MDM_CTL1_DCD2 (1 << 5)
#define AUD_SEL_1341 (1 << 0)
#define AUD_MUTE_1341 (1 << 1)
extern void sa1110_mb_disable(void);
struct neponset_drvdata {
void __iomem *base;
struct platform_device *sa1111;
struct platform_device *smc91x;
unsigned irq_base;
#ifdef CONFIG_PM_SLEEP
u32 ncr0;
u32 mdm_ctl_0;
#endif
};
static void __iomem *nep_base;
void neponset_ncr_frob(unsigned int mask, unsigned int val)
{
void __iomem *base = nep_base;
if (base) {
unsigned long flags;
unsigned v;
local_irq_save(flags);
v = readb_relaxed(base + NCR_0);
writeb_relaxed((v & ~mask) | val, base + NCR_0);
local_irq_restore(flags);
} else {
WARN(1, "nep_base unset\n");
}
}
EXPORT_SYMBOL(neponset_ncr_frob);
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
void __iomem *base = nep_base;
u_int mdm_ctl0;
if (!base)
return;
mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
if (port->mapbase == _Ser1UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS2;
else
mdm_ctl0 |= MDM_CTL0_RTS2;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR2;
else
mdm_ctl0 |= MDM_CTL0_DTR2;
} else if (port->mapbase == _Ser3UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS1;
else
mdm_ctl0 |= MDM_CTL0_RTS1;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR1;
else
mdm_ctl0 |= MDM_CTL0_DTR1;
}
writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
void __iomem *base = nep_base;
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
u_int mdm_ctl1;
if (!base)
return ret;
mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS2)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR2)
ret &= ~TIOCM_DSR;
} else if (port->mapbase == _Ser3UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD1)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS1)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR1)
ret &= ~TIOCM_DSR;
}
return ret;
}
static struct sa1100_port_fns neponset_port_fns = {
.set_mctrl = neponset_set_mctrl,
.get_mctrl = neponset_get_mctrl,
};
/*
* Install handler for Neponset IRQ. Note that we have to loop here
* since the ETHERNET and USAR IRQs are level based, and we need to
* ensure that the IRQ signal is deasserted before returning. This
* is rather unfortunate.
*/
static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
unsigned int irr;
while (1) {
/*
* Acknowledge the parent IRQ.
*/
desc->irq_data.chip->irq_ack(&desc->irq_data);
/*
* Read the interrupt reason register. Let's have all
* active IRQ bits high. Note: there is a typo in the
* Neponset user's guide for the SA1111 IRR level.
*/
irr = readb_relaxed(d->base + IRR);
irr ^= IRR_ETHERNET | IRR_USAR;
if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
break;
/*
* Since there is no individual mask, we have to
* mask the parent IRQ. This is safe, since we'll
* recheck the register for any pending IRQs.
*/
if (irr & (IRR_ETHERNET | IRR_USAR)) {
desc->irq_data.chip->irq_mask(&desc->irq_data);
/*
* Ack the interrupt now to prevent re-entering
* this neponset handler. Again, this is safe
* since we'll check the IRR register prior to
* leaving.
*/
desc->irq_data.chip->irq_ack(&desc->irq_data);
if (irr & IRR_ETHERNET)
generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
if (irr & IRR_USAR)
generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
if (irr & IRR_SA1111)
generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
}
}
/* Yes, we really do not have any kind of masking or unmasking */
static void nochip_noop(struct irq_data *irq)
{
}
static struct irq_chip nochip = {
.name = "neponset",
.irq_ack = nochip_noop,
.irq_mask = nochip_noop,
.irq_unmask = nochip_noop,
};
static struct sa1111_platform_data sa1111_info = {
.disable_devs = SA1111_DEVID_PS2_MSE,
};
static int neponset_probe(struct platform_device *dev)
{
struct neponset_drvdata *d;
struct resource *nep_res, *sa1111_res, *smc91x_res;
struct resource sa1111_resources[] = {
DEFINE_RES_MEM(0x40000000, SZ_8K),
{ .flags = IORESOURCE_IRQ },
};
struct platform_device_info sa1111_devinfo = {
.parent = &dev->dev,
.name = "sa1111",
.id = 0,
.res = sa1111_resources,
.num_res = ARRAY_SIZE(sa1111_resources),
.data = &sa1111_info,
.size_data = sizeof(sa1111_info),
.dma_mask = 0xffffffffUL,
};
struct resource smc91x_resources[] = {
DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
0x02000000, "smc91x-regs"),
DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
0x02000000, "smc91x-attrib"),
{ .flags = IORESOURCE_IRQ },
};
struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT,
};
struct platform_device_info smc91x_devinfo = {
.parent = &dev->dev,
.name = "smc91x",
.id = 0,
.res = smc91x_resources,
.num_res = ARRAY_SIZE(smc91x_resources),
.data = &smc91x_platdata,
.size_data = sizeof(smc91x_platdata),
};
int ret, irq;
if (nep_base)
return -EBUSY;
irq = ret = platform_get_irq(dev, 0);
if (ret < 0)
goto err_alloc;
nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
if (!nep_res || !smc91x_res || !sa1111_res) {
ret = -ENXIO;
goto err_alloc;
}
d = kzalloc(sizeof(*d), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto err_alloc;
}
d->base = ioremap(nep_res->start, SZ_4K);
if (!d->base) {
ret = -ENOMEM;
goto err_ioremap;
}
if (readb_relaxed(d->base + WHOAMI) != 0x11) {
dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
readb_relaxed(d->base + WHOAMI));
ret = -ENODEV;
goto err_id;
}
ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
if (ret <= 0) {
dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
NEP_IRQ_NR, ret);
if (ret == 0)
ret = -ENOMEM;
goto err_irq_alloc;
}
d->irq_base = ret;
irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
handle_simple_irq);
set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE);
irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
handle_simple_irq);
set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE);
irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
irq_set_chained_handler_and_data(irq, neponset_irq_handler, d);
/*
* We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
* something on the Neponset activates this IRQ on sleep (eth?)
*/
#if 0
enable_irq_wake(irq);
#endif
dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
nep_base = d->base;
sa1100_register_uart_fns(&neponset_port_fns);
/* Ensure that the memory bus request/grant signals are setup */
sa1110_mb_disable();
/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
sa1111_resources[0].parent = sa1111_res;
sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
d->sa1111 = platform_device_register_full(&sa1111_devinfo);
smc91x_resources[0].parent = smc91x_res;
smc91x_resources[1].parent = smc91x_res;
smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
d->smc91x = platform_device_register_full(&smc91x_devinfo);
platform_set_drvdata(dev, d);
return 0;
err_irq_alloc:
err_id:
iounmap(d->base);
err_ioremap:
kfree(d);
err_alloc:
return ret;
}
static int neponset_remove(struct platform_device *dev)
{
struct neponset_drvdata *d = platform_get_drvdata(dev);
int irq = platform_get_irq(dev, 0);
if (!IS_ERR(d->sa1111))
platform_device_unregister(d->sa1111);
if (!IS_ERR(d->smc91x))
platform_device_unregister(d->smc91x);
irq_set_chained_handler(irq, NULL);
irq_free_descs(d->irq_base, NEP_IRQ_NR);
nep_base = NULL;
iounmap(d->base);
kfree(d);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int neponset_suspend(struct device *dev)
{
struct neponset_drvdata *d = dev_get_drvdata(dev);
d->ncr0 = readb_relaxed(d->base + NCR_0);
d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
return 0;
}
static int neponset_resume(struct device *dev)
{
struct neponset_drvdata *d = dev_get_drvdata(dev);
writeb_relaxed(d->ncr0, d->base + NCR_0);
writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
return 0;
}
static const struct dev_pm_ops neponset_pm_ops = {
.suspend_noirq = neponset_suspend,
.resume_noirq = neponset_resume,
.freeze_noirq = neponset_suspend,
.restore_noirq = neponset_resume,
};
#define PM_OPS &neponset_pm_ops
#else
#define PM_OPS NULL
#endif
static struct platform_driver neponset_device_driver = {
.probe = neponset_probe,
.remove = neponset_remove,
.driver = {
.name = "neponset",
.pm = PM_OPS,
},
};
static int __init neponset_init(void)
{
return platform_driver_register(&neponset_device_driver);
}
subsys_initcall(neponset_init);