| /* |
| This file is provided under a dual BSD/GPLv2 license. When using or |
| redistributing this file, you may do so under either license. |
| |
| GPL LICENSE SUMMARY |
| Copyright(c) 2014 Intel Corporation. |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of version 2 of the GNU General Public License as |
| published by the Free Software Foundation. |
| |
| This program is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| Contact Information: |
| qat-linux@intel.com |
| |
| BSD LICENSE |
| Copyright(c) 2014 Intel Corporation. |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in |
| the documentation and/or other materials provided with the |
| distribution. |
| * Neither the name of Intel Corporation nor the names of its |
| contributors may be used to endorse or promote products derived |
| from this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/workqueue.h> |
| #include <linux/io.h> |
| #include <adf_accel_devices.h> |
| #include <adf_common_drv.h> |
| #include <adf_cfg.h> |
| #include <adf_transport_access_macros.h> |
| #include "adf_dh895xcc_hw_data.h" |
| #include "adf_drv.h" |
| |
| static const char adf_driver_name[] = ADF_DH895XCC_DEVICE_NAME; |
| |
| #define ADF_SYSTEM_DEVICE(device_id) \ |
| {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)} |
| |
| static const struct pci_device_id adf_pci_tbl[] = { |
| ADF_SYSTEM_DEVICE(ADF_DH895XCC_PCI_DEVICE_ID), |
| {0,} |
| }; |
| MODULE_DEVICE_TABLE(pci, adf_pci_tbl); |
| |
| static int adf_probe(struct pci_dev *dev, const struct pci_device_id *ent); |
| static void adf_remove(struct pci_dev *dev); |
| |
| static struct pci_driver adf_driver = { |
| .id_table = adf_pci_tbl, |
| .name = adf_driver_name, |
| .probe = adf_probe, |
| .remove = adf_remove |
| }; |
| |
| static void adf_cleanup_accel(struct adf_accel_dev *accel_dev) |
| { |
| struct adf_accel_pci *accel_pci_dev = &accel_dev->accel_pci_dev; |
| int i; |
| |
| adf_dev_shutdown(accel_dev); |
| |
| for (i = 0; i < ADF_PCI_MAX_BARS; i++) { |
| struct adf_bar *bar = &accel_pci_dev->pci_bars[i]; |
| |
| if (bar->virt_addr) |
| pci_iounmap(accel_pci_dev->pci_dev, bar->virt_addr); |
| } |
| |
| if (accel_dev->hw_device) { |
| switch (accel_dev->hw_device->pci_dev_id) { |
| case ADF_DH895XCC_PCI_DEVICE_ID: |
| adf_clean_hw_data_dh895xcc(accel_dev->hw_device); |
| break; |
| default: |
| break; |
| } |
| kfree(accel_dev->hw_device); |
| } |
| adf_cfg_dev_remove(accel_dev); |
| debugfs_remove(accel_dev->debugfs_dir); |
| adf_devmgr_rm_dev(accel_dev); |
| pci_release_regions(accel_pci_dev->pci_dev); |
| pci_disable_device(accel_pci_dev->pci_dev); |
| kfree(accel_dev); |
| } |
| |
| static int adf_dev_configure(struct adf_accel_dev *accel_dev) |
| { |
| int cpus = num_online_cpus(); |
| int banks = GET_MAX_BANKS(accel_dev); |
| int instances = min(cpus, banks); |
| char key[ADF_CFG_MAX_KEY_LEN_IN_BYTES]; |
| int i; |
| unsigned long val; |
| |
| if (adf_cfg_section_add(accel_dev, ADF_KERNEL_SEC)) |
| goto err; |
| if (adf_cfg_section_add(accel_dev, "Accelerator0")) |
| goto err; |
| for (i = 0; i < instances; i++) { |
| val = i; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_BANK_NUM, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_ETRMGR_CORE_AFFINITY, |
| i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_SIZE, i); |
| val = 128; |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = 512; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_SYM_SIZE, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = 0; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_TX, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = 2; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_SYM_TX, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = 4; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_RND_TX, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = 8; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_RX, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = 10; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_SYM_RX, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = 12; |
| snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_RND_RX, i); |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| val = ADF_COALESCING_DEF_TIME; |
| snprintf(key, sizeof(key), ADF_ETRMGR_COALESCE_TIMER_FORMAT, i); |
| if (adf_cfg_add_key_value_param(accel_dev, "Accelerator0", |
| key, (void *)&val, ADF_DEC)) |
| goto err; |
| } |
| |
| val = i; |
| if (adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, |
| ADF_NUM_CY, (void *)&val, ADF_DEC)) |
| goto err; |
| |
| set_bit(ADF_STATUS_CONFIGURED, &accel_dev->status); |
| return 0; |
| err: |
| dev_err(&GET_DEV(accel_dev), "Failed to start QAT accel dev\n"); |
| return -EINVAL; |
| } |
| |
| static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct adf_accel_dev *accel_dev; |
| struct adf_accel_pci *accel_pci_dev; |
| struct adf_hw_device_data *hw_data; |
| char name[ADF_DEVICE_NAME_LENGTH]; |
| unsigned int i, bar_nr; |
| int ret; |
| |
| switch (ent->device) { |
| case ADF_DH895XCC_PCI_DEVICE_ID: |
| break; |
| default: |
| dev_err(&pdev->dev, "Invalid device 0x%x.\n", ent->device); |
| return -ENODEV; |
| } |
| |
| if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) { |
| /* If the accelerator is connected to a node with no memory |
| * there is no point in using the accelerator since the remote |
| * memory transaction will be very slow. */ |
| dev_err(&pdev->dev, "Invalid NUMA configuration.\n"); |
| return -EINVAL; |
| } |
| |
| accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL, |
| dev_to_node(&pdev->dev)); |
| if (!accel_dev) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&accel_dev->crypto_list); |
| |
| /* Add accel device to accel table. |
| * This should be called before adf_cleanup_accel is called */ |
| if (adf_devmgr_add_dev(accel_dev)) { |
| dev_err(&pdev->dev, "Failed to add new accelerator device.\n"); |
| kfree(accel_dev); |
| return -EFAULT; |
| } |
| |
| accel_dev->owner = THIS_MODULE; |
| /* Allocate and configure device configuration structure */ |
| hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL, |
| dev_to_node(&pdev->dev)); |
| if (!hw_data) { |
| ret = -ENOMEM; |
| goto out_err; |
| } |
| |
| accel_dev->hw_device = hw_data; |
| switch (ent->device) { |
| case ADF_DH895XCC_PCI_DEVICE_ID: |
| adf_init_hw_data_dh895xcc(accel_dev->hw_device); |
| break; |
| default: |
| return -ENODEV; |
| } |
| accel_pci_dev = &accel_dev->accel_pci_dev; |
| pci_read_config_byte(pdev, PCI_REVISION_ID, &accel_pci_dev->revid); |
| pci_read_config_dword(pdev, ADF_DH895XCC_FUSECTL_OFFSET, |
| &hw_data->fuses); |
| |
| /* Get Accelerators and Accelerators Engines masks */ |
| hw_data->accel_mask = hw_data->get_accel_mask(hw_data->fuses); |
| hw_data->ae_mask = hw_data->get_ae_mask(hw_data->fuses); |
| accel_pci_dev->sku = hw_data->get_sku(hw_data); |
| accel_pci_dev->pci_dev = pdev; |
| /* If the device has no acceleration engines then ignore it. */ |
| if (!hw_data->accel_mask || !hw_data->ae_mask || |
| ((~hw_data->ae_mask) & 0x01)) { |
| dev_err(&pdev->dev, "No acceleration units found"); |
| ret = -EFAULT; |
| goto out_err; |
| } |
| |
| /* Create dev top level debugfs entry */ |
| snprintf(name, sizeof(name), "%s%s_dev%d", ADF_DEVICE_NAME_PREFIX, |
| hw_data->dev_class->name, hw_data->instance_id); |
| accel_dev->debugfs_dir = debugfs_create_dir(name, NULL); |
| if (!accel_dev->debugfs_dir) { |
| dev_err(&pdev->dev, "Could not create debugfs dir\n"); |
| ret = -EINVAL; |
| goto out_err; |
| } |
| |
| /* Create device configuration table */ |
| ret = adf_cfg_dev_add(accel_dev); |
| if (ret) |
| goto out_err; |
| |
| pcie_set_readrq(pdev, 1024); |
| |
| /* enable PCI device */ |
| if (pci_enable_device(pdev)) { |
| ret = -EFAULT; |
| goto out_err; |
| } |
| |
| /* set dma identifier */ |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { |
| if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) { |
| dev_err(&pdev->dev, "No usable DMA configuration\n"); |
| ret = -EFAULT; |
| goto out_err; |
| } else { |
| pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| } |
| |
| } else { |
| pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); |
| } |
| |
| if (pci_request_regions(pdev, adf_driver_name)) { |
| ret = -EFAULT; |
| goto out_err; |
| } |
| |
| /* Read accelerator capabilities mask */ |
| pci_read_config_dword(pdev, ADF_DH895XCC_LEGFUSE_OFFSET, |
| &hw_data->accel_capabilities_mask); |
| |
| /* Find and map all the device's BARS */ |
| for (i = 0; i < ADF_PCI_MAX_BARS; i++) { |
| struct adf_bar *bar = &accel_pci_dev->pci_bars[i]; |
| |
| bar_nr = i * 2; |
| bar->base_addr = pci_resource_start(pdev, bar_nr); |
| if (!bar->base_addr) |
| break; |
| bar->size = pci_resource_len(pdev, bar_nr); |
| bar->virt_addr = pci_iomap(accel_pci_dev->pci_dev, bar_nr, 0); |
| if (!bar->virt_addr) { |
| dev_err(&pdev->dev, "Failed to map BAR %d\n", i); |
| ret = -EFAULT; |
| goto out_err; |
| } |
| } |
| pci_set_master(pdev); |
| |
| if (adf_enable_aer(accel_dev, &adf_driver)) { |
| dev_err(&pdev->dev, "Failed to enable aer\n"); |
| ret = -EFAULT; |
| goto out_err; |
| } |
| |
| if (pci_save_state(pdev)) { |
| dev_err(&pdev->dev, "Failed to save pci state\n"); |
| ret = -ENOMEM; |
| goto out_err; |
| } |
| |
| ret = adf_dev_configure(accel_dev); |
| if (ret) |
| goto out_err; |
| |
| ret = adf_dev_init(accel_dev); |
| if (ret) |
| goto out_err; |
| |
| ret = adf_dev_start(accel_dev); |
| if (ret) { |
| adf_dev_stop(accel_dev); |
| goto out_err; |
| } |
| |
| return 0; |
| out_err: |
| adf_cleanup_accel(accel_dev); |
| return ret; |
| } |
| |
| static void adf_remove(struct pci_dev *pdev) |
| { |
| struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev); |
| |
| if (!accel_dev) { |
| pr_err("QAT: Driver removal failed\n"); |
| return; |
| } |
| if (adf_dev_stop(accel_dev)) |
| dev_err(&GET_DEV(accel_dev), "Failed to stop QAT accel dev\n"); |
| adf_disable_aer(accel_dev); |
| adf_cleanup_accel(accel_dev); |
| } |
| |
| static int __init adfdrv_init(void) |
| { |
| request_module("intel_qat"); |
| if (qat_admin_register()) |
| return -EFAULT; |
| |
| if (pci_register_driver(&adf_driver)) { |
| pr_err("QAT: Driver initialization failed\n"); |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| static void __exit adfdrv_release(void) |
| { |
| pci_unregister_driver(&adf_driver); |
| qat_admin_unregister(); |
| } |
| |
| module_init(adfdrv_init); |
| module_exit(adfdrv_release); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Intel"); |
| MODULE_FIRMWARE(ADF_DH895XCC_FW); |
| MODULE_DESCRIPTION("Intel(R) QuickAssist Technology"); |
| MODULE_VERSION(ADF_DRV_VERSION); |