diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 2538e05..d3399c2 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -108,19 +108,6 @@
 	bool nomadik;
 };
 
-/*
- * PL08X private data structures
- * An LLI struct - see PL08x TRM.  Note that next uses bit[0] as a bus bit,
- * start & end do not - their bus bit info is in cctl.  Also note that these
- * are fixed 32-bit quantities.
- */
-struct pl08x_lli {
-	u32 src;
-	u32 dst;
-	u32 lli;
-	u32 cctl;
-};
-
 /**
  * struct pl08x_bus_data - information of source or destination
  * busses for a transfer
@@ -181,7 +168,7 @@
 	struct virt_dma_desc vd;
 	struct list_head dsg_list;
 	dma_addr_t llis_bus;
-	struct pl08x_lli *llis_va;
+	u32 *llis_va;
 	/* Default cctl value for LLIs */
 	u32 cctl;
 	/*
@@ -265,17 +252,27 @@
 	struct dma_pool *pool;
 	u8 lli_buses;
 	u8 mem_buses;
+	u8 lli_words;
 };
 
 /*
  * PL08X specific defines
  */
 
-/* Size (bytes) of each LLI buffer allocated for one transfer */
-# define PL08X_LLI_TSFR_SIZE	0x2000
+/* The order of words in an LLI. */
+#define PL080_LLI_SRC		0
+#define PL080_LLI_DST		1
+#define PL080_LLI_LLI		2
+#define PL080_LLI_CCTL		3
 
-/* Maximum times we call dma_pool_alloc on this pool without freeing */
-#define MAX_NUM_TSFR_LLIS	(PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
+/* Total words in an LLI. */
+#define PL080_LLI_WORDS		4
+
+/*
+ * Number of LLIs in each LLI buffer allocated for one transfer
+ * (maximum times we call dma_pool_alloc on this pool without freeing)
+ */
+#define MAX_NUM_TSFR_LLIS	512
 #define PL08X_ALIGN		8
 
 static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
@@ -340,6 +337,23 @@
 	return val & PL080_CONFIG_ACTIVE;
 }
 
+static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
+		struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg)
+{
+	dev_vdbg(&pl08x->adev->dev,
+		"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+		"clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
+		phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+		lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
+
+	writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR);
+	writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR);
+	writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI);
+	writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL);
+
+	writel(ccfg, phychan->reg_config);
+}
+
 /*
  * Set the initial DMA register values i.e. those for the first LLI
  * The next LLI pointer and the configuration interrupt bit have
@@ -352,7 +366,6 @@
 	struct pl08x_phy_chan *phychan = plchan->phychan;
 	struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc);
 	struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
-	struct pl08x_lli *lli;
 	u32 val;
 
 	list_del(&txd->vd.node);
@@ -363,19 +376,7 @@
 	while (pl08x_phy_channel_busy(phychan))
 		cpu_relax();
 
-	lli = &txd->llis_va[0];
-
-	dev_vdbg(&pl08x->adev->dev,
-		"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
-		"clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
-		phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
-		txd->ccfg);
-
-	writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
-	writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
-	writel(lli->lli, phychan->base + PL080_CH_LLI);
-	writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
-	writel(txd->ccfg, phychan->reg_config);
+	pl08x_write_lli(pl08x, phychan, &txd->llis_va[0], txd->ccfg);
 
 	/* Enable the DMA channel */
 	/* Do not access config register until channel shows as disabled */
@@ -471,12 +472,13 @@
 /* The channel should be paused when calling this */
 static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
 {
-	struct pl08x_lli *llis_va;
+	struct pl08x_driver_data *pl08x = plchan->host;
+	const u32 *llis_va, *llis_va_limit;
 	struct pl08x_phy_chan *ch;
 	dma_addr_t llis_bus;
 	struct pl08x_txd *txd;
+	u32 llis_max_words;
 	size_t bytes;
-	int index;
 	u32 clli;
 
 	ch = plchan->phychan;
@@ -500,22 +502,25 @@
 	llis_va = txd->llis_va;
 	llis_bus = txd->llis_bus;
 
+	llis_max_words = pl08x->lli_words * MAX_NUM_TSFR_LLIS;
 	BUG_ON(clli < llis_bus || clli >= llis_bus +
-				sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS);
+						sizeof(u32) * llis_max_words);
 
 	/*
 	 * Locate the next LLI - as this is an array,
 	 * it's simple maths to find.
 	 */
-	index = (clli - llis_bus) / sizeof(struct pl08x_lli);
+	llis_va += (clli - llis_bus) / sizeof(u32);
 
-	for (; index < MAX_NUM_TSFR_LLIS; index++) {
-		bytes += get_bytes_in_cctl(llis_va[index].cctl);
+	llis_va_limit = llis_va + llis_max_words;
+
+	for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) {
+		bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]);
 
 		/*
 		 * A LLI pointer of 0 terminates the LLI list
 		 */
-		if (!llis_va[index].lli)
+		if (!llis_va[PL080_LLI_LLI])
 			break;
 	}
 
@@ -771,20 +776,24 @@
 /*
  * Fills in one LLI for a certain transfer descriptor and advance the counter
  */
-static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
-	int num_llis, int len, u32 cctl)
+static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
+				    struct pl08x_lli_build_data *bd,
+				    int num_llis, int len, u32 cctl)
 {
-	struct pl08x_lli *llis_va = bd->txd->llis_va;
+	u32 offset = num_llis * pl08x->lli_words;
+	u32 *llis_va = bd->txd->llis_va + offset;
 	dma_addr_t llis_bus = bd->txd->llis_bus;
 
 	BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
 
-	llis_va[num_llis].cctl = cctl;
-	llis_va[num_llis].src = bd->srcbus.addr;
-	llis_va[num_llis].dst = bd->dstbus.addr;
-	llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
-		sizeof(struct pl08x_lli);
-	llis_va[num_llis].lli |= bd->lli_bus;
+	/* Advance the offset to next LLI. */
+	offset += pl08x->lli_words;
+
+	llis_va[PL080_LLI_SRC] = bd->srcbus.addr;
+	llis_va[PL080_LLI_DST] = bd->dstbus.addr;
+	llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset);
+	llis_va[PL080_LLI_LLI] |= bd->lli_bus;
+	llis_va[PL080_LLI_CCTL] = cctl;
 
 	if (cctl & PL080_CONTROL_SRC_INCR)
 		bd->srcbus.addr += len;
@@ -796,11 +805,12 @@
 	bd->remainder -= len;
 }
 
-static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
-		u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
+static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x,
+			struct pl08x_lli_build_data *bd, u32 *cctl, u32 len,
+			int num_llis, size_t *total_bytes)
 {
 	*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
-	pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
+	pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl);
 	(*total_bytes) += len;
 }
 
@@ -817,7 +827,7 @@
 	int num_llis = 0;
 	u32 cctl, early_bytes = 0;
 	size_t max_bytes_per_lli, total_bytes;
-	struct pl08x_lli *llis_va;
+	u32 *llis_va, *last_lli;
 	struct pl08x_sg *dsg;
 
 	txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
@@ -904,7 +914,8 @@
 
 			cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
 					bd.dstbus.buswidth, 0);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
+			pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
+					0, cctl);
 			break;
 		}
 
@@ -926,8 +937,8 @@
 			dev_vdbg(&pl08x->adev->dev,
 				"%s byte width LLIs (remain 0x%08x)\n",
 				__func__, bd.remainder);
-			prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
-				&total_bytes);
+			prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes,
+				num_llis++, &total_bytes);
 		}
 
 		if (bd.remainder) {
@@ -983,7 +994,7 @@
 
 				cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
 					bd.dstbus.buswidth, tsize);
-				pl08x_fill_lli_for_desc(&bd, num_llis++,
+				pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
 						lli_len, cctl);
 				total_bytes += lli_len;
 			}
@@ -995,8 +1006,8 @@
 				dev_vdbg(&pl08x->adev->dev,
 					"%s align with boundary, send odd bytes (remain %zu)\n",
 					__func__, bd.remainder);
-				prep_byte_width_lli(&bd, &cctl, bd.remainder,
-						num_llis++, &total_bytes);
+				prep_byte_width_lli(pl08x, &bd, &cctl,
+					bd.remainder, num_llis++, &total_bytes);
 			}
 		}
 
@@ -1010,16 +1021,17 @@
 		if (num_llis >= MAX_NUM_TSFR_LLIS) {
 			dev_err(&pl08x->adev->dev,
 				"%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
-				__func__, (u32) MAX_NUM_TSFR_LLIS);
+				__func__, MAX_NUM_TSFR_LLIS);
 			return 0;
 		}
 	}
 
 	llis_va = txd->llis_va;
+	last_lli = llis_va + (num_llis - 1) * pl08x->lli_words;
 	/* The final LLI terminates the LLI. */
-	llis_va[num_llis - 1].lli = 0;
+	last_lli[PL080_LLI_LLI] = 0;
 	/* The final LLI element shall also fire an interrupt. */
-	llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
+	last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN;
 
 #ifdef VERBOSE_DEBUG
 	{
@@ -1031,9 +1043,10 @@
 		for (i = 0; i < num_llis; i++) {
 			dev_vdbg(&pl08x->adev->dev,
 				 "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
-				 i, &llis_va[i], llis_va[i].src,
-				 llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl
-				);
+				 i, llis_va, llis_va[PL080_LLI_SRC],
+				 llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+				 llis_va[PL080_LLI_CCTL]);
+			llis_va += pl08x->lli_words;
 		}
 	}
 #endif
@@ -1853,6 +1866,7 @@
 {
 	struct pl08x_driver_data *pl08x;
 	const struct vendor_data *vd = id->data;
+	u32 tsfr_size;
 	int ret = 0;
 	int i;
 
@@ -1909,9 +1923,12 @@
 		pl08x->mem_buses = pl08x->pd->mem_buses;
 	}
 
+	pl08x->lli_words = PL080_LLI_WORDS;
+	tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32);
+
 	/* A DMA memory pool for LLIs, align on 1-byte boundary */
 	pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
-			PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);
+						tsfr_size, PL08X_ALIGN, 0);
 	if (!pl08x->pool) {
 		ret = -ENOMEM;
 		goto out_no_lli_pool;