DRM/i915: Remove i965_hpd_irq_setup.
After
"Convert HPD interrupts to make use of HPD pin assignment in encoders."
This function is now basically the same as i915_hpd_irq_setup().
Consolidating both functions in one requires one more check for
I915_HAS_HOTPLUG(dev) in the i965 code path and one more check for
IS_G4X(dev) in the i915 code path. These are considered harmless.
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Fixup patch conflict and make it compile.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 64c79a0..666a0ec 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2526,25 +2526,6 @@
return 0;
}
-static void i915_hpd_irq_setup(struct drm_device *dev)
-{
- if (I915_HAS_HOTPLUG(dev)) {
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct intel_encoder *encoder;
- u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
- hotplug_en &= ~HOTPLUG_INT_EN_MASK;
- list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
- hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
- /* Ignore TV since it's buggy */
-
- I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
- }
-}
-
/*
* Returns true when a page flip has completed.
*/
@@ -2774,29 +2755,31 @@
return 0;
}
-static void i965_hpd_irq_setup(struct drm_device *dev)
+static void i915_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
u32 hotplug_en;
- /* Note HDMI and DP share hotplug bits */
- hotplug_en = 0;
- list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ if (I915_HAS_HOTPLUG(dev)) {
+ hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ hotplug_en &= ~HOTPLUG_INT_EN_MASK;
+ /* Note HDMI and DP share hotplug bits */
/* enable bits are the same for all generations */
- hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
- /* Programming the CRT detection parameters tends
- to generate a spurious hotplug event about three
- seconds later. So just do it once.
- */
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- /* Ignore TV since it's buggy */
-
- I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+ /* Ignore TV since it's buggy */
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+ }
}
static irqreturn_t i965_irq_handler(int irq, void *arg)
@@ -3008,7 +2991,7 @@
dev->driver->irq_postinstall = i965_irq_postinstall;
dev->driver->irq_uninstall = i965_irq_uninstall;
dev->driver->irq_handler = i965_irq_handler;
- dev_priv->display.hpd_irq_setup = i965_hpd_irq_setup;
+ dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
}
dev->driver->enable_vblank = i915_enable_vblank;
dev->driver->disable_vblank = i915_disable_vblank;