| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/genhd.h> |
| #include <linux/mutex.h> |
| #include <linux/ide.h> |
| #include <linux/hdreg.h> |
| #include <linux/dmi.h> |
| #include <linux/slab.h> |
| |
| #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) |
| #define IDE_DISK_MINORS (1 << PARTN_BITS) |
| #else |
| #define IDE_DISK_MINORS 0 |
| #endif |
| |
| #include "ide-disk.h" |
| #include "ide-floppy.h" |
| |
| #define IDE_GD_VERSION "1.18" |
| |
| /* module parameters */ |
| static DEFINE_MUTEX(ide_gd_mutex); |
| static unsigned long debug_mask; |
| module_param(debug_mask, ulong, 0644); |
| |
| static DEFINE_MUTEX(ide_disk_ref_mutex); |
| |
| static void ide_disk_release(struct device *); |
| |
| static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) |
| { |
| struct ide_disk_obj *idkp = NULL; |
| |
| mutex_lock(&ide_disk_ref_mutex); |
| idkp = ide_drv_g(disk, ide_disk_obj); |
| if (idkp) { |
| if (ide_device_get(idkp->drive)) |
| idkp = NULL; |
| else |
| get_device(&idkp->dev); |
| } |
| mutex_unlock(&ide_disk_ref_mutex); |
| return idkp; |
| } |
| |
| static void ide_disk_put(struct ide_disk_obj *idkp) |
| { |
| ide_drive_t *drive = idkp->drive; |
| |
| mutex_lock(&ide_disk_ref_mutex); |
| put_device(&idkp->dev); |
| ide_device_put(drive); |
| mutex_unlock(&ide_disk_ref_mutex); |
| } |
| |
| sector_t ide_gd_capacity(ide_drive_t *drive) |
| { |
| return drive->capacity64; |
| } |
| |
| static int ide_gd_probe(ide_drive_t *); |
| |
| static void ide_gd_remove(ide_drive_t *drive) |
| { |
| struct ide_disk_obj *idkp = drive->driver_data; |
| struct gendisk *g = idkp->disk; |
| |
| ide_proc_unregister_driver(drive, idkp->driver); |
| device_del(&idkp->dev); |
| del_gendisk(g); |
| drive->disk_ops->flush(drive); |
| |
| mutex_lock(&ide_disk_ref_mutex); |
| put_device(&idkp->dev); |
| mutex_unlock(&ide_disk_ref_mutex); |
| } |
| |
| static void ide_disk_release(struct device *dev) |
| { |
| struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj); |
| ide_drive_t *drive = idkp->drive; |
| struct gendisk *g = idkp->disk; |
| |
| drive->disk_ops = NULL; |
| drive->driver_data = NULL; |
| g->private_data = NULL; |
| put_disk(g); |
| kfree(idkp); |
| } |
| |
| /* |
| * On HPA drives the capacity needs to be |
| * reinitialized on resume otherwise the disk |
| * can not be used and a hard reset is required |
| */ |
| static void ide_gd_resume(ide_drive_t *drive) |
| { |
| if (ata_id_hpa_enabled(drive->id)) |
| (void)drive->disk_ops->get_capacity(drive); |
| } |
| |
| static const struct dmi_system_id ide_coldreboot_table[] = { |
| { |
| /* Acer TravelMate 66x cuts power during reboot */ |
| .ident = "Acer TravelMate 660", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), |
| }, |
| }, |
| |
| { } /* terminate list */ |
| }; |
| |
| static void ide_gd_shutdown(ide_drive_t *drive) |
| { |
| #ifdef CONFIG_ALPHA |
| /* On Alpha, halt(8) doesn't actually turn the machine off, |
| it puts you into the sort of firmware monitor. Typically, |
| it's used to boot another kernel image, so it's not much |
| different from reboot(8). Therefore, we don't need to |
| spin down the disk in this case, especially since Alpha |
| firmware doesn't handle disks in standby mode properly. |
| On the other hand, it's reasonably safe to turn the power |
| off when the shutdown process reaches the firmware prompt, |
| as the firmware initialization takes rather long time - |
| at least 10 seconds, which should be sufficient for |
| the disk to expire its write cache. */ |
| if (system_state != SYSTEM_POWER_OFF) { |
| #else |
| if (system_state == SYSTEM_RESTART && |
| !dmi_check_system(ide_coldreboot_table)) { |
| #endif |
| drive->disk_ops->flush(drive); |
| return; |
| } |
| |
| printk(KERN_INFO "Shutdown: %s\n", drive->name); |
| |
| drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND); |
| } |
| |
| #ifdef CONFIG_IDE_PROC_FS |
| static ide_proc_entry_t *ide_disk_proc_entries(ide_drive_t *drive) |
| { |
| return (drive->media == ide_disk) ? ide_disk_proc : ide_floppy_proc; |
| } |
| |
| static const struct ide_proc_devset *ide_disk_proc_devsets(ide_drive_t *drive) |
| { |
| return (drive->media == ide_disk) ? ide_disk_settings |
| : ide_floppy_settings; |
| } |
| #endif |
| |
| static ide_startstop_t ide_gd_do_request(ide_drive_t *drive, |
| struct request *rq, sector_t sector) |
| { |
| return drive->disk_ops->do_request(drive, rq, sector); |
| } |
| |
| static struct ide_driver ide_gd_driver = { |
| .gen_driver = { |
| .owner = THIS_MODULE, |
| .name = "ide-gd", |
| .bus = &ide_bus_type, |
| }, |
| .probe = ide_gd_probe, |
| .remove = ide_gd_remove, |
| .resume = ide_gd_resume, |
| .shutdown = ide_gd_shutdown, |
| .version = IDE_GD_VERSION, |
| .do_request = ide_gd_do_request, |
| #ifdef CONFIG_IDE_PROC_FS |
| .proc_entries = ide_disk_proc_entries, |
| .proc_devsets = ide_disk_proc_devsets, |
| #endif |
| }; |
| |
| static int ide_gd_open(struct block_device *bdev, fmode_t mode) |
| { |
| struct gendisk *disk = bdev->bd_disk; |
| struct ide_disk_obj *idkp; |
| ide_drive_t *drive; |
| int ret = 0; |
| |
| idkp = ide_disk_get(disk); |
| if (idkp == NULL) |
| return -ENXIO; |
| |
| drive = idkp->drive; |
| |
| ide_debug_log(IDE_DBG_FUNC, "enter"); |
| |
| idkp->openers++; |
| |
| if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) { |
| drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS; |
| /* Just in case */ |
| |
| ret = drive->disk_ops->init_media(drive, disk); |
| |
| /* |
| * Allow O_NDELAY to open a drive without a disk, or with an |
| * unreadable disk, so that we can get the format capacity |
| * of the drive or begin the format - Sam |
| */ |
| if (ret && (mode & FMODE_NDELAY) == 0) { |
| ret = -EIO; |
| goto out_put_idkp; |
| } |
| |
| if ((drive->dev_flags & IDE_DFLAG_WP) && (mode & FMODE_WRITE)) { |
| ret = -EROFS; |
| goto out_put_idkp; |
| } |
| |
| /* |
| * Ignore the return code from door_lock, |
| * since the open() has already succeeded, |
| * and the door_lock is irrelevant at this point. |
| */ |
| drive->disk_ops->set_doorlock(drive, disk, 1); |
| drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED; |
| check_disk_change(bdev); |
| } else if (drive->dev_flags & IDE_DFLAG_FORMAT_IN_PROGRESS) { |
| ret = -EBUSY; |
| goto out_put_idkp; |
| } |
| return 0; |
| |
| out_put_idkp: |
| idkp->openers--; |
| ide_disk_put(idkp); |
| return ret; |
| } |
| |
| static int ide_gd_unlocked_open(struct block_device *bdev, fmode_t mode) |
| { |
| int ret; |
| |
| mutex_lock(&ide_gd_mutex); |
| ret = ide_gd_open(bdev, mode); |
| mutex_unlock(&ide_gd_mutex); |
| |
| return ret; |
| } |
| |
| |
| static void ide_gd_release(struct gendisk *disk, fmode_t mode) |
| { |
| struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); |
| ide_drive_t *drive = idkp->drive; |
| |
| ide_debug_log(IDE_DBG_FUNC, "enter"); |
| |
| mutex_lock(&ide_gd_mutex); |
| if (idkp->openers == 1) |
| drive->disk_ops->flush(drive); |
| |
| if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) { |
| drive->disk_ops->set_doorlock(drive, disk, 0); |
| drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS; |
| } |
| |
| idkp->openers--; |
| |
| ide_disk_put(idkp); |
| mutex_unlock(&ide_gd_mutex); |
| } |
| |
| static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
| { |
| struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj); |
| ide_drive_t *drive = idkp->drive; |
| |
| geo->heads = drive->bios_head; |
| geo->sectors = drive->bios_sect; |
| geo->cylinders = (u16)drive->bios_cyl; /* truncate */ |
| return 0; |
| } |
| |
| static unsigned int ide_gd_check_events(struct gendisk *disk, |
| unsigned int clearing) |
| { |
| struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); |
| ide_drive_t *drive = idkp->drive; |
| bool ret; |
| |
| /* do not scan partitions twice if this is a removable device */ |
| if (drive->dev_flags & IDE_DFLAG_ATTACH) { |
| drive->dev_flags &= ~IDE_DFLAG_ATTACH; |
| return 0; |
| } |
| |
| /* |
| * The following is used to force revalidation on the first open on |
| * removeable devices, and never gets reported to userland as |
| * genhd->events is 0. This is intended as removeable ide disk |
| * can't really detect MEDIA_CHANGE events. |
| */ |
| ret = drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED; |
| drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED; |
| |
| return ret ? DISK_EVENT_MEDIA_CHANGE : 0; |
| } |
| |
| static void ide_gd_unlock_native_capacity(struct gendisk *disk) |
| { |
| struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); |
| ide_drive_t *drive = idkp->drive; |
| const struct ide_disk_ops *disk_ops = drive->disk_ops; |
| |
| if (disk_ops->unlock_native_capacity) |
| disk_ops->unlock_native_capacity(drive); |
| } |
| |
| static int ide_gd_revalidate_disk(struct gendisk *disk) |
| { |
| struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); |
| ide_drive_t *drive = idkp->drive; |
| |
| if (ide_gd_check_events(disk, 0)) |
| drive->disk_ops->get_capacity(drive); |
| |
| set_capacity(disk, ide_gd_capacity(drive)); |
| return 0; |
| } |
| |
| static int ide_gd_ioctl(struct block_device *bdev, fmode_t mode, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj); |
| ide_drive_t *drive = idkp->drive; |
| |
| return drive->disk_ops->ioctl(drive, bdev, mode, cmd, arg); |
| } |
| |
| static const struct block_device_operations ide_gd_ops = { |
| .owner = THIS_MODULE, |
| .open = ide_gd_unlocked_open, |
| .release = ide_gd_release, |
| .ioctl = ide_gd_ioctl, |
| .getgeo = ide_gd_getgeo, |
| .check_events = ide_gd_check_events, |
| .unlock_native_capacity = ide_gd_unlock_native_capacity, |
| .revalidate_disk = ide_gd_revalidate_disk |
| }; |
| |
| static int ide_gd_probe(ide_drive_t *drive) |
| { |
| const struct ide_disk_ops *disk_ops = NULL; |
| struct ide_disk_obj *idkp; |
| struct gendisk *g; |
| |
| /* strstr("foo", "") is non-NULL */ |
| if (!strstr("ide-gd", drive->driver_req)) |
| goto failed; |
| |
| #ifdef CONFIG_IDE_GD_ATA |
| if (drive->media == ide_disk) |
| disk_ops = &ide_ata_disk_ops; |
| #endif |
| #ifdef CONFIG_IDE_GD_ATAPI |
| if (drive->media == ide_floppy) |
| disk_ops = &ide_atapi_disk_ops; |
| #endif |
| if (disk_ops == NULL) |
| goto failed; |
| |
| if (disk_ops->check(drive, DRV_NAME) == 0) { |
| printk(KERN_ERR PFX "%s: not supported by this driver\n", |
| drive->name); |
| goto failed; |
| } |
| |
| idkp = kzalloc(sizeof(*idkp), GFP_KERNEL); |
| if (!idkp) { |
| printk(KERN_ERR PFX "%s: can't allocate a disk structure\n", |
| drive->name); |
| goto failed; |
| } |
| |
| g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif)); |
| if (!g) |
| goto out_free_idkp; |
| |
| ide_init_disk(g, drive); |
| |
| idkp->dev.parent = &drive->gendev; |
| idkp->dev.release = ide_disk_release; |
| dev_set_name(&idkp->dev, dev_name(&drive->gendev)); |
| |
| if (device_register(&idkp->dev)) |
| goto out_free_disk; |
| |
| idkp->drive = drive; |
| idkp->driver = &ide_gd_driver; |
| idkp->disk = g; |
| |
| g->private_data = &idkp->driver; |
| |
| drive->driver_data = idkp; |
| drive->debug_mask = debug_mask; |
| drive->disk_ops = disk_ops; |
| |
| disk_ops->setup(drive); |
| |
| set_capacity(g, ide_gd_capacity(drive)); |
| |
| g->minors = IDE_DISK_MINORS; |
| g->driverfs_dev = &drive->gendev; |
| g->flags |= GENHD_FL_EXT_DEVT; |
| if (drive->dev_flags & IDE_DFLAG_REMOVABLE) |
| g->flags = GENHD_FL_REMOVABLE; |
| g->fops = &ide_gd_ops; |
| add_disk(g); |
| return 0; |
| |
| out_free_disk: |
| put_disk(g); |
| out_free_idkp: |
| kfree(idkp); |
| failed: |
| return -ENODEV; |
| } |
| |
| static int __init ide_gd_init(void) |
| { |
| printk(KERN_INFO DRV_NAME " driver " IDE_GD_VERSION "\n"); |
| return driver_register(&ide_gd_driver.gen_driver); |
| } |
| |
| static void __exit ide_gd_exit(void) |
| { |
| driver_unregister(&ide_gd_driver.gen_driver); |
| } |
| |
| MODULE_ALIAS("ide:*m-disk*"); |
| MODULE_ALIAS("ide-disk"); |
| MODULE_ALIAS("ide:*m-floppy*"); |
| MODULE_ALIAS("ide-floppy"); |
| module_init(ide_gd_init); |
| module_exit(ide_gd_exit); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("generic ATA/ATAPI disk driver"); |