Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 03641a0..8906648 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -268,10 +268,6 @@
!Finclude/net/mac80211.h ieee80211_ops
!Finclude/net/mac80211.h ieee80211_alloc_hw
!Finclude/net/mac80211.h ieee80211_register_hw
-!Finclude/net/mac80211.h ieee80211_get_tx_led_name
-!Finclude/net/mac80211.h ieee80211_get_rx_led_name
-!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
-!Finclude/net/mac80211.h ieee80211_get_radio_led_name
!Finclude/net/mac80211.h ieee80211_unregister_hw
!Finclude/net/mac80211.h ieee80211_free_hw
</chapter>
@@ -382,6 +378,23 @@
</para>
</partintro>
+ <chapter id="led-support">
+ <title>LED support</title>
+ <para>
+ Mac80211 supports various ways of blinking LEDs. Wherever possible,
+ device LEDs should be exposed as LED class devices and hooked up to
+ the appropriate trigger, which will then be triggered appropriately
+ by mac80211.
+ </para>
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_tpt_blink
+!Finclude/net/mac80211.h ieee80211_tpt_led_trigger_flags
+!Finclude/net/mac80211.h ieee80211_create_tpt_led_trigger
+ </chapter>
+
<chapter id="hardware-crypto-offload">
<title>Hardware crypto acceleration</title>
!Pinclude/net/mac80211.h Hardware crypto acceleration
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 01880aa..ea2e7d7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -954,6 +954,9 @@
&adc_dc_cal_multi_sample;
}
ah->supp_cals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
+
+ if (AR_SREV_9287(ah))
+ ah->supp_cals &= ~ADC_GAIN_CAL;
}
}
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 088f141..749a936 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -226,6 +226,10 @@
eep->baseEepHeader.pwdclkind == 0)
ah->need_an_top2_fixup = 1;
+ if ((common->bus_ops->ath_bus_type == ATH_USB) &&
+ (AR_SREV_9280(ah)))
+ eep->modalHeader[0].xpaBiasLvl = 0;
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index a099b3e..1ce506f 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -433,6 +433,7 @@
void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
enum htc_endpoint_id ep_id, bool txok);
+int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv);
void ath9k_htc_station_work(struct work_struct *work);
void ath9k_htc_aggr_work(struct work_struct *work);
void ath9k_ani_work(struct work_struct *work);;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 845b4c9..f4d576b 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -301,6 +301,16 @@
priv->nstations++;
+ /*
+ * Set chainmask etc. on the target.
+ */
+ ret = ath9k_htc_update_cap_target(priv);
+ if (ret)
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Failed to update capability in target\n");
+
+ priv->ah->is_monitoring = true;
+
return 0;
err_vif:
@@ -328,6 +338,7 @@
}
priv->nstations--;
+ priv->ah->is_monitoring = false;
return 0;
}
@@ -419,7 +430,7 @@
return 0;
}
-static int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv)
+int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv)
{
struct ath9k_htc_cap_target tcap;
int ret;
@@ -1186,6 +1197,20 @@
}
}
+ /*
+ * Monitor interface should be added before
+ * IEEE80211_CONF_CHANGE_CHANNEL is handled.
+ */
+ if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+ if (conf->flags & IEEE80211_CONF_MONITOR) {
+ if (ath9k_htc_add_monitor_interface(priv))
+ ath_err(common, "Failed to set monitor mode\n");
+ else
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "HW opmode set to Monitor mode\n");
+ }
+ }
+
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *curchan = hw->conf.channel;
int pos = curchan->hw_value;
@@ -1221,16 +1246,6 @@
ath_update_txpow(priv);
}
- if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
- if (conf->flags & IEEE80211_CONF_MONITOR) {
- if (ath9k_htc_add_monitor_interface(priv))
- ath_err(common, "Failed to set monitor mode\n");
- else
- ath_dbg(common, ATH_DBG_CONFIG,
- "HW opmode set to Monitor mode\n");
- }
- }
-
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
mutex_lock(&priv->htc_pm_lock);
if (!priv->ps_idle) {
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index fde9786..1afb8bb 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -436,9 +436,10 @@
static int ath9k_hw_post_init(struct ath_hw *ah)
{
+ struct ath_common *common = ath9k_hw_common(ah);
int ecode;
- if (!AR_SREV_9271(ah)) {
+ if (common->bus_ops->ath_bus_type != ATH_USB) {
if (!ath9k_hw_chip_test(ah))
return -ENODEV;
}
@@ -1213,7 +1214,7 @@
ah->txchainmask = common->tx_chainmask;
ah->rxchainmask = common->rx_chainmask;
- if (!ah->chip_fullsleep) {
+ if ((common->bus_ops->ath_bus_type != ATH_USB) && !ah->chip_fullsleep) {
ath9k_hw_abortpcurecv(ah);
if (!ath9k_hw_stopdmarecv(ah)) {
ath_dbg(common, ATH_DBG_XMIT,
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index bd8a413..2176ede 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -518,22 +518,21 @@
hw_priv->link = link;
/*
- * Make sure the IRQ handler cannot proceed until at least
- * dev->base_addr is initialized.
+ * We enable IRQ here, but IRQ handler will not proceed
+ * until dev->base_addr is set below. This protect us from
+ * receive interrupts when driver is not initialized.
*/
- spin_lock_irqsave(&local->irq_init_lock, flags);
-
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
- goto failed_unlock;
+ goto failed;
ret = pcmcia_enable_device(link);
if (ret)
- goto failed_unlock;
+ goto failed;
+ spin_lock_irqsave(&local->irq_init_lock, flags);
dev->irq = link->irq;
dev->base_addr = link->resource[0]->start;
-
spin_unlock_irqrestore(&local->irq_init_lock, flags);
local->shutdown = 0;
@@ -546,8 +545,6 @@
return ret;
- failed_unlock:
- spin_unlock_irqrestore(&local->irq_init_lock, flags);
failed:
kfree(hw_priv);
prism2_release((u_long)link);
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 8d6ed5f..ae438ed 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -1973,6 +1973,13 @@
inta = ipw_read32(priv, IPW_INTA_RW);
inta_mask = ipw_read32(priv, IPW_INTA_MASK_R);
+
+ if (inta == 0xFFFFFFFF) {
+ /* Hardware disappeared */
+ IPW_WARNING("TASKLET INTA == 0xFFFFFFFF\n");
+ /* Only handle the cached INTA values */
+ inta = 0;
+ }
inta &= (IPW_INTA_MASK_ALL & inta_mask);
/* Add any cached INTA values that need to be handled */
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 76b2318a..f618b96 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -618,7 +618,7 @@
else
*burst_possible = false;
- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+ if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
*flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 5a0985d..29884c0 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -420,6 +420,16 @@
bus->pcicore.dev = dev;
#endif /* CONFIG_SSB_DRIVER_PCICORE */
break;
+ case SSB_DEV_ETHERNET:
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+ (bus->host_pci->device & 0xFF00) == 0x4300) {
+ /* This is a dangling ethernet core on a
+ * wireless device. Ignore it. */
+ continue;
+ }
+ }
+ break;
default:
break;
}
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2b89b71..821ffb9 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -148,6 +148,10 @@
* @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
* destination %NL80211_ATTR_MAC on the interface identified by
* %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ * %NL80211_ATTR_MAC.
* @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
* the interface identified by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
@@ -612,7 +616,7 @@
* consisting of a nested array.
*
* @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
* @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
* @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
* info given for %NL80211_CMD_GET_MPATH, nested attribute described at
@@ -879,7 +883,9 @@
* See &enum nl80211_key_default_types.
*
* @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
- * changed once the mesh is active.
+ * changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ * containing attributes from &enum nl80211_meshconf_params.
*
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1225,8 +1231,6 @@
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
* @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
* containing info as possible, see &enum nl80211_sta_info_txrate.
@@ -1236,6 +1240,11 @@
* @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
* @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
* @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
@@ -1626,7 +1635,7 @@
* @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
* that it takes for an HWMP information element to propagate across the mesh
*
- * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
*
* @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
* source mesh point for path selection elements.
@@ -1678,6 +1687,7 @@
* element that vendors will use to identify the path selection methods and
* metrics in use.
*
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
*/
enum nl80211_mesh_setup_params {
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bcc9f44..1322695 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1103,6 +1103,8 @@
* @change_mpath: change a given mesh path
* @get_mpath: get a mesh path for the given parameters
* @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @join_mesh: join the mesh network with the specified parameters
+ * @leave_mesh: leave the current mesh network
*
* @get_mesh_config: Get the current mesh configuration
*
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5b3fd5a..62c0ce2 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -337,6 +337,10 @@
* @IEEE80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame
* @IEEE80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this
* frame and selects the maximum number of streams that it can use.
+ * @IEEE80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on
+ * the off-channel channel when a remain-on-channel offload is done
+ * in hardware -- normal packets still flow and are expected to be
+ * handled properly by the device.
*
* Note: If you have to add new flags to the enumeration, then don't
* forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
@@ -1753,6 +1757,16 @@
* (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
*
* @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
+ *
+ * @remain_on_channel: Starts an off-channel period on the given channel, must
+ * call back to ieee80211_ready_on_channel() when on that channel. Note
+ * that normal channel traffic is not stopped as this is intended for hw
+ * offload. Frames to transmit on the off-channel channel are transmitted
+ * normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
+ * duration (which will always be non-zero) expires, the driver must call
+ * ieee80211_remain_on_channel_expired(). This callback may sleep.
+ * @cancel_remain_on_channel: Requests that an ongoing off-channel period is
+ * aborted before it expires. This callback may sleep.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);