lis3: SPI transport layer
Make use of the new abstraction layer and add a new transport layer for
spi. Works fine on a PXA based board.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
new file mode 100644
index 0000000..07ae74b
--- /dev/null
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -0,0 +1,114 @@
+/*
+ * lis3lv02d_spi - SPI glue layer for lis3lv02d
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+
+#include "lis3lv02d.h"
+
+#define DRV_NAME "lis3lv02d_spi"
+#define LIS3_SPI_READ 0x80
+
+static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v)
+{
+ struct spi_device *spi = lis3->bus_priv;
+ int ret = spi_w8r8(spi, reg | LIS3_SPI_READ);
+ if (ret < 0)
+ return -EINVAL;
+
+ *v = (u8) ret;
+ return 0;
+}
+
+static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val)
+{
+ u8 tmp[2] = { reg, val };
+ struct spi_device *spi = lis3->bus_priv;
+ return spi_write(spi, tmp, sizeof(tmp));
+}
+
+static int lis3_spi_init(struct lis3lv02d *lis3)
+{
+ u8 reg;
+ int ret;
+
+ /* power up the device */
+ ret = lis3->read(lis3, CTRL_REG1, ®);
+ if (ret < 0)
+ return ret;
+
+ reg |= CTRL1_PD0;
+ return lis3->write(lis3, CTRL_REG1, reg);
+}
+
+static struct axis_conversion lis3lv02d_axis_normal = { 1, 2, 3 };
+
+static int __devinit lis302dl_spi_probe(struct spi_device *spi)
+{
+ int ret;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_0;
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ lis3_dev.bus_priv = spi;
+ lis3_dev.init = lis3_spi_init;
+ lis3_dev.read = lis3_spi_read;
+ lis3_dev.write = lis3_spi_write;
+ lis3_dev.irq = spi->irq;
+ lis3_dev.ac = lis3lv02d_axis_normal;
+ spi_set_drvdata(spi, &lis3_dev);
+
+ ret = lis3lv02d_init_device(&lis3_dev);
+ return ret;
+}
+
+static int __devexit lis302dl_spi_remove(struct spi_device *spi)
+{
+ struct lis3lv02d *lis3 = spi_get_drvdata(spi);
+ lis3lv02d_joystick_disable();
+ lis3lv02d_poweroff(lis3);
+ return 0;
+}
+
+static struct spi_driver lis302dl_spi_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = lis302dl_spi_probe,
+ .remove = __devexit_p(lis302dl_spi_remove),
+};
+
+static int __init lis302dl_init(void)
+{
+ return spi_register_driver(&lis302dl_spi_driver);
+}
+
+static void __exit lis302dl_exit(void)
+{
+ spi_unregister_driver(&lis302dl_spi_driver);
+}
+
+module_init(lis302dl_init);
+module_exit(lis302dl_exit);
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("lis3lv02d SPI glue layer");
+MODULE_LICENSE("GPL");
+