[SCSI] ib_srp: convert to use the data buffer accessors
- remove the unnecessary map_single path.
- convert to use the new accessors for the sg lists and the
parameters.
Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 39bf057..f01ca18 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -455,10 +455,7 @@
struct srp_target_port *target,
struct srp_request *req)
{
- struct scatterlist *scat;
- int nents;
-
- if (!scmnd->request_buffer ||
+ if (!scsi_sglist(scmnd) ||
(scmnd->sc_data_direction != DMA_TO_DEVICE &&
scmnd->sc_data_direction != DMA_FROM_DEVICE))
return;
@@ -468,20 +465,8 @@
req->fmr = NULL;
}
- /*
- * This handling of non-SG commands can be killed when the
- * SCSI midlayer no longer generates non-SG commands.
- */
- if (likely(scmnd->use_sg)) {
- nents = scmnd->use_sg;
- scat = scmnd->request_buffer;
- } else {
- nents = 1;
- scat = &req->fake_sg;
- }
-
- ib_dma_unmap_sg(target->srp_host->dev->dev, scat, nents,
- scmnd->sc_data_direction);
+ ib_dma_unmap_sg(target->srp_host->dev->dev, scsi_sglist(scmnd),
+ scsi_sg_count(scmnd), scmnd->sc_data_direction);
}
static void srp_remove_req(struct srp_target_port *target, struct srp_request *req)
@@ -595,6 +580,7 @@
int ret;
struct srp_device *dev = target->srp_host->dev;
struct ib_device *ibdev = dev->dev;
+ struct scatterlist *sg;
if (!dev->fmr_pool)
return -ENODEV;
@@ -604,16 +590,16 @@
return -EINVAL;
len = page_cnt = 0;
- for (i = 0; i < sg_cnt; ++i) {
- unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+ scsi_for_each_sg(req->scmnd, sg, sg_cnt, i) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, sg);
- if (ib_sg_dma_address(ibdev, &scat[i]) & ~dev->fmr_page_mask) {
+ if (ib_sg_dma_address(ibdev, sg) & ~dev->fmr_page_mask) {
if (i > 0)
return -EINVAL;
else
++page_cnt;
}
- if ((ib_sg_dma_address(ibdev, &scat[i]) + dma_len) &
+ if ((ib_sg_dma_address(ibdev, sg) + dma_len) &
~dev->fmr_page_mask) {
if (i < sg_cnt - 1)
return -EINVAL;
@@ -633,12 +619,12 @@
return -ENOMEM;
page_cnt = 0;
- for (i = 0; i < sg_cnt; ++i) {
- unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+ scsi_for_each_sg(req->scmnd, sg, sg_cnt, i) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, sg);
for (j = 0; j < dma_len; j += dev->fmr_page_size)
dma_pages[page_cnt++] =
- (ib_sg_dma_address(ibdev, &scat[i]) &
+ (ib_sg_dma_address(ibdev, sg) &
dev->fmr_page_mask) + j;
}
@@ -673,7 +659,7 @@
struct srp_device *dev;
struct ib_device *ibdev;
- if (!scmnd->request_buffer || scmnd->sc_data_direction == DMA_NONE)
+ if (!scsi_sglist(scmnd) || scmnd->sc_data_direction == DMA_NONE)
return sizeof (struct srp_cmd);
if (scmnd->sc_data_direction != DMA_FROM_DEVICE &&
@@ -683,18 +669,8 @@
return -EINVAL;
}
- /*
- * This handling of non-SG commands can be killed when the
- * SCSI midlayer no longer generates non-SG commands.
- */
- if (likely(scmnd->use_sg)) {
- nents = scmnd->use_sg;
- scat = scmnd->request_buffer;
- } else {
- nents = 1;
- scat = &req->fake_sg;
- sg_init_one(scat, scmnd->request_buffer, scmnd->request_bufflen);
- }
+ nents = scsi_sg_count(scmnd);
+ scat = scsi_sglist(scmnd);
dev = target->srp_host->dev;
ibdev = dev->dev;
@@ -724,6 +700,7 @@
* descriptor.
*/
struct srp_indirect_buf *buf = (void *) cmd->add_data;
+ struct scatterlist *sg;
u32 datalen = 0;
int i;
@@ -732,11 +709,11 @@
sizeof (struct srp_indirect_buf) +
count * sizeof (struct srp_direct_buf);
- for (i = 0; i < count; ++i) {
- unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+ scsi_for_each_sg(scmnd, sg, count, i) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, sg);
buf->desc_list[i].va =
- cpu_to_be64(ib_sg_dma_address(ibdev, &scat[i]));
+ cpu_to_be64(ib_sg_dma_address(ibdev, sg));
buf->desc_list[i].key =
cpu_to_be32(dev->mr->rkey);
buf->desc_list[i].len = cpu_to_be32(dma_len);
@@ -802,9 +779,9 @@
}
if (rsp->flags & (SRP_RSP_FLAG_DOOVER | SRP_RSP_FLAG_DOUNDER))
- scmnd->resid = be32_to_cpu(rsp->data_out_res_cnt);
+ scsi_set_resid(scmnd, be32_to_cpu(rsp->data_out_res_cnt));
else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER))
- scmnd->resid = be32_to_cpu(rsp->data_in_res_cnt);
+ scsi_set_resid(scmnd, be32_to_cpu(rsp->data_in_res_cnt));
if (!req->tsk_mgmt) {
scmnd->host_scribble = (void *) -1L;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index 1d53c7b..e3573e7 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -106,11 +106,6 @@
struct srp_iu *cmd;
struct srp_iu *tsk_mgmt;
struct ib_pool_fmr *fmr;
- /*
- * Fake scatterlist used when scmnd->use_sg==0. Can be killed
- * when the SCSI midlayer no longer generates non-SG commands.
- */
- struct scatterlist fake_sg;
struct completion done;
short index;
u8 cmd_done;