| /* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ |
| * linux/include/linux/cyclades.h |
| * |
| * This file was initially written by |
| * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by |
| * Ivan Passos <ivan@cyclades.com>. |
| * |
| * This file contains the general definitions for the cyclades.c driver |
| *$Log: cyclades.h,v $ |
| *Revision 3.1 2002/01/29 11:36:16 henrique |
| *added throttle field on struct cyclades_port to indicate whether the |
| *port is throttled or not |
| * |
| *Revision 3.1 2000/04/19 18:52:52 ivan |
| *converted address fields to unsigned long and added fields for physical |
| *addresses on cyclades_card structure; |
| * |
| *Revision 3.0 1998/11/02 14:20:59 ivan |
| *added nports field on cyclades_card structure; |
| * |
| *Revision 2.5 1998/08/03 16:57:01 ivan |
| *added cyclades_idle_stats structure; |
| * |
| *Revision 2.4 1998/06/01 12:09:53 ivan |
| *removed closing_wait2 from cyclades_port structure; |
| * |
| *Revision 2.3 1998/03/16 18:01:12 ivan |
| *changes in the cyclades_port structure to get it closer to the |
| *standard serial port structure; |
| *added constants for new ioctls; |
| * |
| *Revision 2.2 1998/02/17 16:50:00 ivan |
| *changes in the cyclades_port structure (addition of shutdown_wait and |
| *chip_rev variables); |
| *added constants for new ioctls and for CD1400 rev. numbers. |
| * |
| *Revision 2.1 1997/10/24 16:03:00 ivan |
| *added rflow (which allows enabling the CD1400 special flow control |
| *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to |
| *cyclades_port structure; |
| *added Alpha support |
| * |
| *Revision 2.0 1997/06/30 10:30:00 ivan |
| *added some new doorbell command constants related to IOCTLW and |
| *UART error signaling |
| * |
| *Revision 1.8 1997/06/03 15:30:00 ivan |
| *added constant ZFIRM_HLT |
| *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) |
| * |
| *Revision 1.7 1997/03/26 10:30:00 daniel |
| *new entries at the end of cyclades_port struct to reallocate |
| *variables illegally allocated within card memory. |
| * |
| *Revision 1.6 1996/09/09 18:35:30 bentson |
| *fold in changes for Cyclom-Z -- including structures for |
| *communicating with board as well modest changes to original |
| *structures to support new features. |
| * |
| *Revision 1.5 1995/11/13 21:13:31 bentson |
| *changes suggested by Michael Chastain <mec@duracef.shout.net> |
| *to support use of this file in non-kernel applications |
| * |
| * |
| */ |
| #ifndef _LINUX_CYCLADES_H |
| #define _LINUX_CYCLADES_H |
| |
| #include <uapi/linux/cyclades.h> |
| |
| |
| /* Per card data structure */ |
| struct cyclades_card { |
| void __iomem *base_addr; |
| union { |
| void __iomem *p9050; |
| struct RUNTIME_9060 __iomem *p9060; |
| } ctl_addr; |
| struct BOARD_CTRL __iomem *board_ctrl; /* cyz specific */ |
| int irq; |
| unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */ |
| unsigned int first_line; /* minor number of first channel on card */ |
| unsigned int nports; /* Number of ports in the card */ |
| int bus_index; /* address shift - 0 for ISA, 1 for PCI */ |
| int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */ |
| u32 hw_ver; |
| spinlock_t card_lock; |
| struct cyclades_port *ports; |
| }; |
| |
| /*************************************** |
| * Memory access functions/macros * |
| * (required to support Alpha systems) * |
| ***************************************/ |
| |
| #define cy_writeb(port,val) do { writeb((val), (port)); mb(); } while (0) |
| #define cy_writew(port,val) do { writew((val), (port)); mb(); } while (0) |
| #define cy_writel(port,val) do { writel((val), (port)); mb(); } while (0) |
| |
| /* |
| * Statistics counters |
| */ |
| struct cyclades_icount { |
| __u32 cts, dsr, rng, dcd, tx, rx; |
| __u32 frame, parity, overrun, brk; |
| __u32 buf_overrun; |
| }; |
| |
| /* |
| * This is our internal structure for each serial port's state. |
| * |
| * Many fields are paralleled by the structure used by the serial_struct |
| * structure. |
| * |
| * For definitions of the flags field, see tty.h |
| */ |
| |
| struct cyclades_port { |
| int magic; |
| struct tty_port port; |
| struct cyclades_card *card; |
| union { |
| struct { |
| void __iomem *base_addr; |
| } cyy; |
| struct { |
| struct CH_CTRL __iomem *ch_ctrl; |
| struct BUF_CTRL __iomem *buf_ctrl; |
| } cyz; |
| } u; |
| int line; |
| int flags; /* defined in tty.h */ |
| int type; /* UART type */ |
| int read_status_mask; |
| int ignore_status_mask; |
| int timeout; |
| int xmit_fifo_size; |
| int cor1,cor2,cor3,cor4,cor5; |
| int tbpr,tco,rbpr,rco; |
| int baud; |
| int rflow; |
| int rtsdtr_inv; |
| int chip_rev; |
| int custom_divisor; |
| u8 x_char; /* to be pushed out ASAP */ |
| int breakon; |
| int breakoff; |
| int xmit_head; |
| int xmit_tail; |
| int xmit_cnt; |
| int default_threshold; |
| int default_timeout; |
| unsigned long rflush_count; |
| struct cyclades_monitor mon; |
| struct cyclades_idle_stats idle_stats; |
| struct cyclades_icount icount; |
| struct completion shutdown_wait; |
| int throttle; |
| }; |
| |
| #define CLOSING_WAIT_DELAY 30*HZ |
| #define CY_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE |
| #define CY_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF |
| |
| |
| #define CyMAX_CHIPS_PER_CARD 8 |
| #define CyMAX_CHAR_FIFO 12 |
| #define CyPORTS_PER_CHIP 4 |
| #define CD1400_MAX_SPEED 115200 |
| |
| #define CyISA_Ywin 0x2000 |
| |
| #define CyPCI_Ywin 0x4000 |
| #define CyPCI_Yctl 0x80 |
| #define CyPCI_Zctl CTRL_WINDOW_SIZE |
| #define CyPCI_Zwin 0x80000 |
| #define CyPCI_Ze_win (2 * CyPCI_Zwin) |
| |
| #define PCI_DEVICE_ID_MASK 0x06 |
| |
| /**** CD1400 registers ****/ |
| |
| #define CD1400_REV_G 0x46 |
| #define CD1400_REV_J 0x48 |
| |
| #define CyRegSize 0x0400 |
| #define Cy_HwReset 0x1400 |
| #define Cy_ClrIntr 0x1800 |
| #define Cy_EpldRev 0x1e00 |
| |
| /* Global Registers */ |
| |
| #define CyGFRCR (0x40*2) |
| #define CyRevE (44) |
| #define CyCAR (0x68*2) |
| #define CyCHAN_0 (0x00) |
| #define CyCHAN_1 (0x01) |
| #define CyCHAN_2 (0x02) |
| #define CyCHAN_3 (0x03) |
| #define CyGCR (0x4B*2) |
| #define CyCH0_SERIAL (0x00) |
| #define CyCH0_PARALLEL (0x80) |
| #define CySVRR (0x67*2) |
| #define CySRModem (0x04) |
| #define CySRTransmit (0x02) |
| #define CySRReceive (0x01) |
| #define CyRICR (0x44*2) |
| #define CyTICR (0x45*2) |
| #define CyMICR (0x46*2) |
| #define CyICR0 (0x00) |
| #define CyICR1 (0x01) |
| #define CyICR2 (0x02) |
| #define CyICR3 (0x03) |
| #define CyRIR (0x6B*2) |
| #define CyTIR (0x6A*2) |
| #define CyMIR (0x69*2) |
| #define CyIRDirEq (0x80) |
| #define CyIRBusy (0x40) |
| #define CyIRUnfair (0x20) |
| #define CyIRContext (0x1C) |
| #define CyIRChannel (0x03) |
| #define CyPPR (0x7E*2) |
| #define CyCLOCK_20_1MS (0x27) |
| #define CyCLOCK_25_1MS (0x31) |
| #define CyCLOCK_25_5MS (0xf4) |
| #define CyCLOCK_60_1MS (0x75) |
| #define CyCLOCK_60_2MS (0xea) |
| |
| /* Virtual Registers */ |
| |
| #define CyRIVR (0x43*2) |
| #define CyTIVR (0x42*2) |
| #define CyMIVR (0x41*2) |
| #define CyIVRMask (0x07) |
| #define CyIVRRxEx (0x07) |
| #define CyIVRRxOK (0x03) |
| #define CyIVRTxOK (0x02) |
| #define CyIVRMdmOK (0x01) |
| #define CyTDR (0x63*2) |
| #define CyRDSR (0x62*2) |
| #define CyTIMEOUT (0x80) |
| #define CySPECHAR (0x70) |
| #define CyBREAK (0x08) |
| #define CyPARITY (0x04) |
| #define CyFRAME (0x02) |
| #define CyOVERRUN (0x01) |
| #define CyMISR (0x4C*2) |
| /* see CyMCOR_ and CyMSVR_ for bits*/ |
| #define CyEOSRR (0x60*2) |
| |
| /* Channel Registers */ |
| |
| #define CyLIVR (0x18*2) |
| #define CyMscsr (0x01) |
| #define CyTdsr (0x02) |
| #define CyRgdsr (0x03) |
| #define CyRedsr (0x07) |
| #define CyCCR (0x05*2) |
| /* Format 1 */ |
| #define CyCHAN_RESET (0x80) |
| #define CyCHIP_RESET (0x81) |
| #define CyFlushTransFIFO (0x82) |
| /* Format 2 */ |
| #define CyCOR_CHANGE (0x40) |
| #define CyCOR1ch (0x02) |
| #define CyCOR2ch (0x04) |
| #define CyCOR3ch (0x08) |
| /* Format 3 */ |
| #define CySEND_SPEC_1 (0x21) |
| #define CySEND_SPEC_2 (0x22) |
| #define CySEND_SPEC_3 (0x23) |
| #define CySEND_SPEC_4 (0x24) |
| /* Format 4 */ |
| #define CyCHAN_CTL (0x10) |
| #define CyDIS_RCVR (0x01) |
| #define CyENB_RCVR (0x02) |
| #define CyDIS_XMTR (0x04) |
| #define CyENB_XMTR (0x08) |
| #define CySRER (0x06*2) |
| #define CyMdmCh (0x80) |
| #define CyRxData (0x10) |
| #define CyTxRdy (0x04) |
| #define CyTxMpty (0x02) |
| #define CyNNDT (0x01) |
| #define CyCOR1 (0x08*2) |
| #define CyPARITY_NONE (0x00) |
| #define CyPARITY_0 (0x20) |
| #define CyPARITY_1 (0xA0) |
| #define CyPARITY_E (0x40) |
| #define CyPARITY_O (0xC0) |
| #define Cy_1_STOP (0x00) |
| #define Cy_1_5_STOP (0x04) |
| #define Cy_2_STOP (0x08) |
| #define Cy_5_BITS (0x00) |
| #define Cy_6_BITS (0x01) |
| #define Cy_7_BITS (0x02) |
| #define Cy_8_BITS (0x03) |
| #define CyCOR2 (0x09*2) |
| #define CyIXM (0x80) |
| #define CyTxIBE (0x40) |
| #define CyETC (0x20) |
| #define CyAUTO_TXFL (0x60) |
| #define CyLLM (0x10) |
| #define CyRLM (0x08) |
| #define CyRtsAO (0x04) |
| #define CyCtsAE (0x02) |
| #define CyDsrAE (0x01) |
| #define CyCOR3 (0x0A*2) |
| #define CySPL_CH_DRANGE (0x80) /* special character detect range */ |
| #define CySPL_CH_DET1 (0x40) /* enable special character detection |
| on SCHR4-SCHR3 */ |
| #define CyFL_CTRL_TRNSP (0x20) /* Flow Control Transparency */ |
| #define CySPL_CH_DET2 (0x10) /* Enable special character detection |
| on SCHR2-SCHR1 */ |
| #define CyREC_FIFO (0x0F) /* Receive FIFO threshold */ |
| #define CyCOR4 (0x1E*2) |
| #define CyCOR5 (0x1F*2) |
| #define CyCCSR (0x0B*2) |
| #define CyRxEN (0x80) |
| #define CyRxFloff (0x40) |
| #define CyRxFlon (0x20) |
| #define CyTxEN (0x08) |
| #define CyTxFloff (0x04) |
| #define CyTxFlon (0x02) |
| #define CyRDCR (0x0E*2) |
| #define CySCHR1 (0x1A*2) |
| #define CySCHR2 (0x1B*2) |
| #define CySCHR3 (0x1C*2) |
| #define CySCHR4 (0x1D*2) |
| #define CySCRL (0x22*2) |
| #define CySCRH (0x23*2) |
| #define CyLNC (0x24*2) |
| #define CyMCOR1 (0x15*2) |
| #define CyMCOR2 (0x16*2) |
| #define CyRTPR (0x21*2) |
| #define CyMSVR1 (0x6C*2) |
| #define CyMSVR2 (0x6D*2) |
| #define CyANY_DELTA (0xF0) |
| #define CyDSR (0x80) |
| #define CyCTS (0x40) |
| #define CyRI (0x20) |
| #define CyDCD (0x10) |
| #define CyDTR (0x02) |
| #define CyRTS (0x01) |
| #define CyPVSR (0x6F*2) |
| #define CyRBPR (0x78*2) |
| #define CyRCOR (0x7C*2) |
| #define CyTBPR (0x72*2) |
| #define CyTCOR (0x76*2) |
| |
| /* Custom Registers */ |
| |
| #define CyPLX_VER (0x3400) |
| #define PLX_9050 0x0b |
| #define PLX_9060 0x0c |
| #define PLX_9080 0x0d |
| |
| /***************************************************************************/ |
| |
| #endif /* _LINUX_CYCLADES_H */ |