Staging: vme: Remove legacy unsupported code
Remove the code from the drivers that we are not going to implement before
submitting for review.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index a6f853a..faf652e 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -571,16 +571,6 @@
bridge = image->parent->driver_priv;
-#if 0
- printk("Set slave image %d to:\n", image->number);
- printk("\tEnabled: %s\n", (enabled == 1)? "yes" : "no");
- printk("\tVME Base:0x%llx\n", vme_base);
- printk("\tWindow Size:0x%llx\n", size);
- printk("\tPCI Base:0x%lx\n", (unsigned long)pci_base);
- printk("\tAddress Space:0x%x\n", aspace);
- printk("\tTransfer Cycle Properties:0x%x\n", cycle);
-#endif
-
i = image->number;
switch (aspace) {
@@ -636,11 +626,6 @@
return -EINVAL;
}
-#if 0
- printk("\tVME Bound:0x%llx\n", vme_bound);
- printk("\tPCI Offset:0x%llx\n", pci_offset);
-#endif
-
/* Disable while we are mucking around */
temp_ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
TSI148_LCSR_OFFSET_ITAT);
@@ -662,23 +647,6 @@
iowrite32be(pci_offset_low, bridge->base + TSI148_LCSR_IT[i] +
TSI148_LCSR_OFFSET_ITOFL);
-/* XXX Prefetch stuff currently unsupported */
-#if 0
-
- for (x = 0; x < 4; x++) {
- if ((64 << x) >= vmeIn->prefetchSize) {
- break;
- }
- }
- if (x == 4)
- x--;
- temp_ctl |= (x << 16);
-
- if (vmeIn->prefetchThreshold)
- if (vmeIn->prefetchThreshold)
- temp_ctl |= 0x40000;
-#endif
-
/* Setup 2eSST speeds */
temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M;
switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
@@ -735,8 +703,6 @@
/*
* Get slave window configuration.
- *
- * XXX Prefetch currently unsupported.
*/
int tsi148_slave_get(struct vme_slave_resource *image, int *enabled,
unsigned long long *vme_base, unsigned long long *size,
@@ -1030,20 +996,6 @@
iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
TSI148_LCSR_OFFSET_OTAT);
-/* XXX Prefetch stuff currently unsupported */
-#if 0
- if (vmeOut->prefetchEnable) {
- temp_ctl |= 0x40000;
- for (x = 0; x < 4; x++) {
- if ((2 << x) >= vmeOut->prefetchSize)
- break;
- }
- if (x == 4)
- x = 3;
- temp_ctl |= (x << 16);
- }
-#endif
-
/* Setup 2eSST speeds */
temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M;
switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
@@ -1156,12 +1108,6 @@
iowrite32be(vme_offset_low, bridge->base + TSI148_LCSR_OT[i] +
TSI148_LCSR_OFFSET_OTOFL);
-/* XXX We need to deal with OTBS */
-#if 0
- iowrite32be(vmeOut->bcastSelect2esst, bridge->base +
- TSI148_LCSR_OT[i] + TSI148_LCSR_OFFSET_OTBS);
-#endif
-
/* Write ctl reg without enable */
iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
TSI148_LCSR_OFFSET_OTAT);
@@ -1669,8 +1615,6 @@
/*
* Add a link list descriptor to the list
- *
- * XXX Need to handle 2eSST Broadcast select bits
*/
int tsi148_dma_list_add (struct vme_dma_list *list, struct vme_dma_attr *src,
struct vme_dma_attr *dest, size_t count)
@@ -1683,7 +1627,7 @@
dma_addr_t desc_ptr;
int retval = 0;
- /* XXX descriptor must be aligned on 64-bit boundaries */
+ /* Descriptor must be aligned on 64-bit boundaries */
entry = (struct tsi148_dma_entry *)kmalloc(
sizeof(struct tsi148_dma_entry), GFP_KERNEL);
if (entry == NULL) {
@@ -1850,9 +1794,6 @@
dma_addr_t bus_addr;
u32 bus_addr_high, bus_addr_low;
u32 val, dctlreg = 0;
-#if 0
- int x;
-#endif
struct tsi148_driver *bridge;
ctrlr = list->parent;
@@ -1875,48 +1816,6 @@
} else {
list_add(&(list->list), &(ctrlr->running));
}
-#if 0
- /* XXX Still todo */
- for (x = 0; x < 8; x++) { /* vme block size */
- if ((32 << x) >= vmeDma->maxVmeBlockSize) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 12);
-
- for (x = 0; x < 8; x++) { /* pci block size */
- if ((32 << x) >= vmeDma->maxPciBlockSize) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 4);
-
- if (vmeDma->vmeBackOffTimer) {
- for (x = 1; x < 8; x++) { /* vme timer */
- if ((1 << (x - 1)) >= vmeDma->vmeBackOffTimer) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 8);
- }
-
- if (vmeDma->pciBackOffTimer) {
- for (x = 1; x < 8; x++) { /* pci timer */
- if ((1 << (x - 1)) >= vmeDma->pciBackOffTimer) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 0);
- }
-#endif
/* Get first bus address and write into registers */
entry = list_first_entry(&(list->entries), struct tsi148_dma_entry,
@@ -2738,251 +2637,3 @@
module_init(tsi148_init);
module_exit(tsi148_exit);
-
-/*----------------------------------------------------------------------------
- * STAGING
- *--------------------------------------------------------------------------*/
-
-#if 0
-/*
- * Direct Mode DMA transfer
- *
- * XXX Not looking at direct mode for now, we can always use link list mode
- * with a single entry.
- */
-int tsi148_dma_run(struct vme_dma_resource *resource, struct vme_dma_attr src,
- struct vme_dma_attr dest, size_t count)
-{
- u32 dctlreg = 0;
- unsigned int tmp;
- int val;
- int channel, x;
- struct vmeDmaPacket *cur_dma;
- struct tsi148_dma_descriptor *dmaLL;
-
- /* direct mode */
- dctlreg = 0x800000;
-
- for (x = 0; x < 8; x++) { /* vme block size */
- if ((32 << x) >= vmeDma->maxVmeBlockSize) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 12);
-
- for (x = 0; x < 8; x++) { /* pci block size */
- if ((32 << x) >= vmeDma->maxPciBlockSize) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 4);
-
- if (vmeDma->vmeBackOffTimer) {
- for (x = 1; x < 8; x++) { /* vme timer */
- if ((1 << (x - 1)) >= vmeDma->vmeBackOffTimer) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 8);
- }
-
- if (vmeDma->pciBackOffTimer) {
- for (x = 1; x < 8; x++) { /* pci timer */
- if ((1 << (x - 1)) >= vmeDma->pciBackOffTimer) {
- break;
- }
- }
- if (x == 8)
- x = 7;
- dctlreg |= (x << 0);
- }
-
- /* Program registers for DMA transfer */
- iowrite32be(dmaLL->dsau, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSAU);
- iowrite32be(dmaLL->dsal, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSAL);
- iowrite32be(dmaLL->ddau, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDAU);
- iowrite32be(dmaLL->ddal, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDAL);
- iowrite32be(dmaLL->dsat, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSAT);
- iowrite32be(dmaLL->ddat, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDAT);
- iowrite32be(dmaLL->dcnt, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCNT);
- iowrite32be(dmaLL->ddbs, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DDBS);
-
- /* Start the operation */
- iowrite32be(dctlreg | 0x2000000, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL);
-
- tmp = ioread32be(tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSTA);
- wait_event_interruptible(dma_queue[channel], (tmp & 0x1000000) == 0);
-
- /*
- * Read status register, we should probably do this in some error
- * handler rather than here so that we can be sure we haven't kicked off
- * another DMA transfer.
- */
- val = ioread32be(tsi148_bridge->driver_priv->base +
- TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DSTA);
-
- vmeDma->vmeDmaStatus = 0;
- if (val & 0x10000000) {
- printk(KERN_ERR
- "DMA Error in DMA_tempe_irqhandler DSTA=%08X\n",
- val);
- vmeDma->vmeDmaStatus = val;
-
- }
- return (0);
-}
-#endif
-
-#if 0
-
-/* Global VME controller information */
-struct pci_dev *vme_pci_dev;
-
-/*
- * Set the VME bus arbiter with the requested attributes
- */
-int tempe_set_arbiter(vmeArbiterCfg_t * vmeArb)
-{
- int temp_ctl = 0;
- int gto = 0;
-
- temp_ctl = ioread32be(tsi148_bridge->driver_priv->base +
- TSI148_LCSR_VCTRL);
- temp_ctl &= 0xFFEFFF00;
-
- if (vmeArb->globalTimeoutTimer == 0xFFFFFFFF) {
- gto = 8;
- } else if (vmeArb->globalTimeoutTimer > 2048) {
- return (-EINVAL);
- } else if (vmeArb->globalTimeoutTimer == 0) {
- gto = 0;
- } else {
- gto = 1;
- while ((16 * (1 << (gto - 1))) < vmeArb->globalTimeoutTimer) {
- gto += 1;
- }
- }
- temp_ctl |= gto;
-
- if (vmeArb->arbiterMode != VME_PRIORITY_MODE) {
- temp_ctl |= 1 << 6;
- }
-
- if (vmeArb->arbiterTimeoutFlag) {
- temp_ctl |= 1 << 7;
- }
-
- if (vmeArb->noEarlyReleaseFlag) {
- temp_ctl |= 1 << 20;
- }
- iowrite32be(temp_ctl, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_VCTRL);
-
- return (0);
-}
-
-/*
- * Return the attributes of the VME bus arbiter.
- */
-int tempe_get_arbiter(vmeArbiterCfg_t * vmeArb)
-{
- int temp_ctl = 0;
- int gto = 0;
-
-
- temp_ctl = ioread32be(tsi148_bridge->driver_priv->base +
- TSI148_LCSR_VCTRL);
-
- gto = temp_ctl & 0xF;
- if (gto != 0) {
- vmeArb->globalTimeoutTimer = (16 * (1 << (gto - 1)));
- }
-
- if (temp_ctl & (1 << 6)) {
- vmeArb->arbiterMode = VME_R_ROBIN_MODE;
- } else {
- vmeArb->arbiterMode = VME_PRIORITY_MODE;
- }
-
- if (temp_ctl & (1 << 7)) {
- vmeArb->arbiterTimeoutFlag = 1;
- }
-
- if (temp_ctl & (1 << 20)) {
- vmeArb->noEarlyReleaseFlag = 1;
- }
-
- return (0);
-}
-
-/*
- * Set the VME bus requestor with the requested attributes
- */
-int tempe_set_requestor(vmeRequesterCfg_t * vmeReq)
-{
- int temp_ctl = 0;
-
- temp_ctl = ioread32be(tsi148_bridge->driver_priv->base +
- TSI148_LCSR_VMCTRL);
- temp_ctl &= 0xFFFF0000;
-
- if (vmeReq->releaseMode == 1) {
- temp_ctl |= (1 << 3);
- }
-
- if (vmeReq->fairMode == 1) {
- temp_ctl |= (1 << 2);
- }
-
- temp_ctl |= (vmeReq->timeonTimeoutTimer & 7) << 8;
- temp_ctl |= (vmeReq->timeoffTimeoutTimer & 7) << 12;
- temp_ctl |= vmeReq->requestLevel;
-
- iowrite32be(temp_ctl, tsi148_bridge->driver_priv->base +
- TSI148_LCSR_VMCTRL);
- return (0);
-}
-
-/*
- * Return the attributes of the VME bus requestor
- */
-int tempe_get_requestor(vmeRequesterCfg_t * vmeReq)
-{
- int temp_ctl = 0;
-
- temp_ctl = ioread32be(tsi148_bridge->driver_priv->base +
- TSI148_LCSR_VMCTRL);
-
- if (temp_ctl & 0x18) {
- vmeReq->releaseMode = 1;
- }
-
- if (temp_ctl & (1 << 2)) {
- vmeReq->fairMode = 1;
- }
-
- vmeReq->requestLevel = temp_ctl & 3;
- vmeReq->timeonTimeoutTimer = (temp_ctl >> 8) & 7;
- vmeReq->timeoffTimeoutTimer = (temp_ctl >> 12) & 7;
-
- return (0);
-}
-
-
-#endif