usb: add APIs to access host registers from Tegra PHY
As Tegra PHY driver needs to access one of the host registers,
added few APIs.
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
[swarren: moved assignment of phy->is_ulpi_phy to previous patch.]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 55a9cde..1f596fb 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -2,7 +2,7 @@
* EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
*
* Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2009 NVIDIA Corporation
+ * Copyright (C) 2009 - 2013 NVIDIA Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -26,13 +26,18 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
-
+#include <linux/usb/ehci_def.h>
#include <linux/usb/tegra_usb_phy.h>
#define TEGRA_USB_BASE 0xC5000000
#define TEGRA_USB2_BASE 0xC5004000
#define TEGRA_USB3_BASE 0xC5008000
+/* PORTSC registers */
+#define TEGRA_USB_PORTSC1 0x184
+#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
+#define TEGRA_USB_PORTSC1_PHCD (1 << 23)
+
#define TEGRA_USB_DMA_ALIGN 32
struct tegra_ehci_hcd {
@@ -605,6 +610,37 @@
#endif
+/* Bits of PORTSC1, which will get cleared by writing 1 into them */
+#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+
+void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val)
+{
+ unsigned long val;
+ struct usb_hcd *hcd = bus_to_hcd(x->otg->host);
+ void __iomem *base = hcd->regs;
+
+ val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+ val &= ~TEGRA_USB_PORTSC1_PTS(3);
+ val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3);
+ writel(val, base + TEGRA_USB_PORTSC1);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_set_pts);
+
+void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
+{
+ unsigned long val;
+ struct usb_hcd *hcd = bus_to_hcd(x->otg->host);
+ void __iomem *base = hcd->regs;
+
+ val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+ if (enable)
+ val |= TEGRA_USB_PORTSC1_PHCD;
+ else
+ val &= ~TEGRA_USB_PORTSC1_PHCD;
+ writel(val, base + TEGRA_USB_PORTSC1);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_set_phcd);
+
static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
static int tegra_ehci_probe(struct platform_device *pdev)
@@ -616,6 +652,7 @@
int err = 0;
int irq;
int instance = pdev->id;
+ struct usb_phy *u_phy;
pdata = pdev->dev.platform_data;
if (!pdata) {
@@ -718,6 +755,16 @@
usb_phy_init(&tegra->phy->u_phy);
+ hcd->phy = u_phy = &tegra->phy->u_phy;
+ u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
+ GFP_KERNEL);
+ if (!u_phy->otg) {
+ dev_err(&pdev->dev, "Failed to alloc memory for otg\n");
+ err = -ENOMEM;
+ goto fail_io;
+ }
+ u_phy->otg->host = hcd_to_bus(hcd);
+
err = usb_phy_set_suspend(&tegra->phy->u_phy, 0);
if (err) {
dev_err(&pdev->dev, "Failed to power on the phy\n");