powerpc: clean up after powermac build merge
Complete moving arch/ppc64/kernel/mpic.h,
include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h
and include/asm-ppc64/kprobes.h
Add arch/powerpc/platforms/Makefile and use it from
arch/powerpc/Makefile
Introduce OLDARCH temporarily so we can point back to
the originating architecture
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 8a65e11..d948781 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -18,6 +18,7 @@
HAS_BIARCH := $(call cc-option-yn, -m32)
ifeq ($(CONFIG_PPC64),y)
+OLDARCH := ppc64
SZ := 64
# Set default 32 bits cross compilers for vdso and boot wrapper
@@ -46,6 +47,7 @@
endif
else
+OLDARCH := ppc
SZ := 32
endif
@@ -61,11 +63,9 @@
CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include
AFLAGS += -Iarch/$(ARCH)
CFLAGS += -Iarch/$(ARCH) -msoft-float -pipe
-ifeq ($(CONFIG_PPC64),y)
-CFLAGS += -mminimal-toc -mtraceback=none -mcall-aixdesc
-else
-CFLAGS += -ffixed-r2 -mmultiple
-endif
+CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc
+CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
+CFLAGS += $(CFLAGS-y)
CPP = $(CC) -E $(CFLAGS)
# Temporary hack until we have migrated to asm-powerpc
LINUXINCLUDE += -Iarch/$(ARCH)/include
@@ -126,16 +126,12 @@
endif
core-y += arch/powerpc/kernel/ \
+ arch/$(OLDARCH)/kernel/ \
arch/powerpc/mm/ \
arch/powerpc/lib/ \
- arch/powerpc/sysdev/
-core-$(CONFIG_PPC32) += arch/ppc/kernel/ \
- arch/ppc/syslib/
-core-$(CONFIG_PPC64) += arch/ppc64/kernel/
-core-$(CONFIG_PPC_PMAC) += arch/powerpc/platforms/powermac/
-core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/
-core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/
-core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/
+ arch/powerpc/sysdev/ \
+ arch/powerpc/platforms/
+core-$(CONFIG_PPC32) += arch/ppc/syslib/
core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
@@ -182,17 +178,10 @@
archprepare: checkbin
# Temporary hack until we have migrated to asm-powerpc
-ifeq ($(CONFIG_PPC64),y)
include/asm: arch/$(ARCH)/include/asm
arch/$(ARCH)/include/asm:
$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
- $(Q)ln -fsn $(srctree)/include/asm-ppc64 arch/$(ARCH)/include/asm
-else
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
- $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
- $(Q)ln -fsn $(srctree)/include/asm-ppc arch/$(ARCH)/include/asm
-endif
+ $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm
# Use the file '.tmp_gas_check' for binutils tests, as gas won't output
# to stdout and these checks are run even on install targets.
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
new file mode 100644
index 0000000..dbc0937
--- /dev/null
+++ b/arch/powerpc/platforms/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_PPC_PMAC) += powermac/
+obj-$(CONFIG_4xx) += 4xx/
+obj-$(CONFIG_83xx) += 83xx/
+obj-$(CONFIG_85xx) += 85xx/
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 4f35514..2d755b7 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -2,14 +2,6 @@
prompt "Machine Type"
depends on EMBEDDED6xx
-config APUS
- bool "Amiga-APUS"
- depends on BROKEN
- help
- Select APUS if configuring for a PowerUP Amiga.
- More information is available at:
- <http://linux-apus.sourceforge.net/>.
-
config KATANA
bool "Artesyn-Katana"
help
diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c
index 7e80d49..abb90e6 100644
--- a/arch/ppc64/kernel/kprobes.c
+++ b/arch/ppc64/kernel/kprobes.c
@@ -395,7 +395,6 @@
if (post_kprobe_handler(args->regs))
ret = NOTIFY_STOP;
break;
- case DIE_GPF:
case DIE_PAGE_FAULT:
if (kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/ppc64/kernel/maple_setup.c
index fc05674..2a7fae0 100644
--- a/arch/ppc64/kernel/maple_setup.c
+++ b/arch/ppc64/kernel/maple_setup.c
@@ -59,8 +59,7 @@
#include <asm/time.h>
#include <asm/of_device.h>
#include <asm/lmb.h>
-
-#include "mpic.h"
+#include <asm/mpic.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c
index cc262a0..ec22321 100644
--- a/arch/ppc64/kernel/mpic.c
+++ b/arch/ppc64/kernel/mpic.c
@@ -31,8 +31,7 @@
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/machdep.h>
-
-#include "mpic.h"
+#include <asm/mpic.h>
#ifdef DEBUG
#define DBG(fmt...) printk(fmt)
diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h
deleted file mode 100644
index ca78a7f..0000000
--- a/arch/ppc64/kernel/mpic.h
+++ /dev/null
@@ -1,273 +0,0 @@
-#include <linux/irq.h>
-
-/*
- * Global registers
- */
-
-#define MPIC_GREG_BASE 0x01000
-
-#define MPIC_GREG_FEATURE_0 0x00000
-#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000
-#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16
-#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00
-#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8
-#define MPIC_GREG_FEATURE_VERSION_MASK 0xff
-#define MPIC_GREG_FEATURE_1 0x00010
-#define MPIC_GREG_GLOBAL_CONF_0 0x00020
-#define MPIC_GREG_GCONF_RESET 0x80000000
-#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000
-#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff
-#define MPIC_GREG_GLOBAL_CONF_1 0x00030
-#define MPIC_GREG_VENDOR_0 0x00040
-#define MPIC_GREG_VENDOR_1 0x00050
-#define MPIC_GREG_VENDOR_2 0x00060
-#define MPIC_GREG_VENDOR_3 0x00070
-#define MPIC_GREG_VENDOR_ID 0x00080
-#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000
-#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16
-#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00
-#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8
-#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff
-#define MPIC_GREG_PROCESSOR_INIT 0x00090
-#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0
-#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0
-#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0
-#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0
-#define MPIC_GREG_SPURIOUS 0x000e0
-#define MPIC_GREG_TIMER_FREQ 0x000f0
-
-/*
- *
- * Timer registers
- */
-#define MPIC_TIMER_BASE 0x01100
-#define MPIC_TIMER_STRIDE 0x40
-
-#define MPIC_TIMER_CURRENT_CNT 0x00000
-#define MPIC_TIMER_BASE_CNT 0x00010
-#define MPIC_TIMER_VECTOR_PRI 0x00020
-#define MPIC_TIMER_DESTINATION 0x00030
-
-/*
- * Per-Processor registers
- */
-
-#define MPIC_CPU_THISBASE 0x00000
-#define MPIC_CPU_BASE 0x20000
-#define MPIC_CPU_STRIDE 0x01000
-
-#define MPIC_CPU_IPI_DISPATCH_0 0x00040
-#define MPIC_CPU_IPI_DISPATCH_1 0x00050
-#define MPIC_CPU_IPI_DISPATCH_2 0x00060
-#define MPIC_CPU_IPI_DISPATCH_3 0x00070
-#define MPIC_CPU_CURRENT_TASK_PRI 0x00080
-#define MPIC_CPU_TASKPRI_MASK 0x0000000f
-#define MPIC_CPU_WHOAMI 0x00090
-#define MPIC_CPU_WHOAMI_MASK 0x0000001f
-#define MPIC_CPU_INTACK 0x000a0
-#define MPIC_CPU_EOI 0x000b0
-
-/*
- * Per-source registers
- */
-
-#define MPIC_IRQ_BASE 0x10000
-#define MPIC_IRQ_STRIDE 0x00020
-#define MPIC_IRQ_VECTOR_PRI 0x00000
-#define MPIC_VECPRI_MASK 0x80000000
-#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */
-#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000
-#define MPIC_VECPRI_PRIORITY_SHIFT 16
-#define MPIC_VECPRI_VECTOR_MASK 0x000007ff
-#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000
-#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000
-#define MPIC_VECPRI_POLARITY_MASK 0x00800000
-#define MPIC_VECPRI_SENSE_LEVEL 0x00400000
-#define MPIC_VECPRI_SENSE_EDGE 0x00000000
-#define MPIC_VECPRI_SENSE_MASK 0x00400000
-#define MPIC_IRQ_DESTINATION 0x00010
-
-#define MPIC_MAX_IRQ_SOURCES 2048
-#define MPIC_MAX_CPUS 32
-#define MPIC_MAX_ISU 32
-
-/*
- * Special vector numbers (internal use only)
- */
-#define MPIC_VEC_SPURRIOUS 255
-#define MPIC_VEC_IPI_3 254
-#define MPIC_VEC_IPI_2 253
-#define MPIC_VEC_IPI_1 252
-#define MPIC_VEC_IPI_0 251
-
-/* unused */
-#define MPIC_VEC_TIMER_3 250
-#define MPIC_VEC_TIMER_2 249
-#define MPIC_VEC_TIMER_1 248
-#define MPIC_VEC_TIMER_0 247
-
-/* Type definition of the cascade handler */
-typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
-
-#ifdef CONFIG_MPIC_BROKEN_U3
-/* Fixup table entry */
-struct mpic_irq_fixup
-{
- u8 __iomem *base;
- unsigned int irq;
-};
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
-
-/* The instance data of a given MPIC */
-struct mpic
-{
- /* The "linux" controller struct */
- hw_irq_controller hc_irq;
-#ifdef CONFIG_SMP
- hw_irq_controller hc_ipi;
-#endif
- const char *name;
- /* Flags */
- unsigned int flags;
- /* How many irq sources in a given ISU */
- unsigned int isu_size;
- unsigned int isu_shift;
- unsigned int isu_mask;
- /* Offset of irq vector numbers */
- unsigned int irq_offset;
- unsigned int irq_count;
- /* Offset of ipi vector numbers */
- unsigned int ipi_offset;
- /* Number of sources */
- unsigned int num_sources;
- /* Number of CPUs */
- unsigned int num_cpus;
- /* cascade handler */
- mpic_cascade_t cascade;
- void *cascade_data;
- unsigned int cascade_vec;
- /* senses array */
- unsigned char *senses;
- unsigned int senses_count;
-
-#ifdef CONFIG_MPIC_BROKEN_U3
- /* The fixup table */
- struct mpic_irq_fixup *fixups;
- spinlock_t fixup_lock;
-#endif
-
- /* The various ioremap'ed bases */
- volatile u32 __iomem *gregs;
- volatile u32 __iomem *tmregs;
- volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS];
- volatile u32 __iomem *isus[MPIC_MAX_ISU];
-
- /* link */
- struct mpic *next;
-};
-
-/* This is the primary controller, only that one has IPIs and
- * has afinity control. A non-primary MPIC always uses CPU0
- * registers only
- */
-#define MPIC_PRIMARY 0x00000001
-/* Set this for a big-endian MPIC */
-#define MPIC_BIG_ENDIAN 0x00000002
-/* Broken U3 MPIC */
-#define MPIC_BROKEN_U3 0x00000004
-/* Broken IPI registers (autodetected) */
-#define MPIC_BROKEN_IPI 0x00000008
-/* MPIC wants a reset */
-#define MPIC_WANTS_RESET 0x00000010
-
-/* Allocate the controller structure and setup the linux irq descs
- * for the range if interrupts passed in. No HW initialization is
- * actually performed.
- *
- * @phys_addr: physial base address of the MPIC
- * @flags: flags, see constants above
- * @isu_size: number of interrupts in an ISU. Use 0 to use a
- * standard ISU-less setup (aka powermac)
- * @irq_offset: first irq number to assign to this mpic
- * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0
- * to match the number of sources
- * @ipi_offset: first irq number to assign to this mpic IPI sources,
- * used only on primary mpic
- * @senses: array of sense values
- * @senses_num: number of entries in the array
- *
- * Note about the sense array. If none is passed, all interrupts are
- * setup to be level negative unless MPIC_BROKEN_U3 is set in which
- * case they are edge positive (and the array is ignored anyway).
- * The values in the array start at the first source of the MPIC,
- * that is senses[0] correspond to linux irq "irq_offset".
- */
-extern struct mpic *mpic_alloc(unsigned long phys_addr,
- unsigned int flags,
- unsigned int isu_size,
- unsigned int irq_offset,
- unsigned int irq_count,
- unsigned int ipi_offset,
- unsigned char *senses,
- unsigned int senses_num,
- const char *name);
-
-/* Assign ISUs, to call before mpic_init()
- *
- * @mpic: controller structure as returned by mpic_alloc()
- * @isu_num: ISU number
- * @phys_addr: physical address of the ISU
- */
-extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
- unsigned long phys_addr);
-
-/* Initialize the controller. After this has been called, none of the above
- * should be called again for this mpic
- */
-extern void mpic_init(struct mpic *mpic);
-
-/* Setup a cascade. Currently, only one cascade is supported this
- * way, though you can always do a normal request_irq() and add
- * other cascades this way. You should call this _after_ having
- * added all the ISUs
- *
- * @irq_no: "linux" irq number of the cascade (that is offset'ed vector)
- * @handler: cascade handler function
- */
-extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
- void *data);
-
-/*
- * All of the following functions must only be used after the
- * ISUs have been assigned and the controller fully initialized
- * with mpic_init()
- */
-
-
-/* Change/Read the priority of an interrupt. Default is 8 for irqs and
- * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
- * IPI number is then the offset'ed (linux irq number mapped to the IPI)
- */
-extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-extern unsigned int mpic_irq_get_priority(unsigned int irq);
-
-/* Setup a non-boot CPU */
-extern void mpic_setup_this_cpu(void);
-
-/* Clean up for kexec (or cpu offline or ...) */
-extern void mpic_teardown_this_cpu(int secondary);
-
-/* Request IPIs on primary mpic */
-extern void mpic_request_ipis(void);
-
-/* Send an IPI (non offseted number 0..3) */
-extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
-
-/* Fetch interrupt from a given mpic */
-extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
-/* This one gets to the primary mpic */
-extern int mpic_get_irq(struct pt_regs *regs);
-
-/* global mpic for pSeries */
-extern struct mpic *pSeries_mpic;
diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c
index 3009701..b9bcff2 100644
--- a/arch/ppc64/kernel/pSeries_setup.c
+++ b/arch/ppc64/kernel/pSeries_setup.c
@@ -62,9 +62,9 @@
#include <asm/xics.h>
#include <asm/firmware.h>
#include <asm/pmc.h>
+#include <asm/mpic.h>
#include "i8259.h"
-#include "mpic.h"
#include "pci.h"
#ifdef DEBUG
diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c
index d2c7e2c..5d1ed85 100644
--- a/arch/ppc64/kernel/pSeries_smp.c
+++ b/arch/ppc64/kernel/pSeries_smp.c
@@ -46,8 +46,8 @@
#include <asm/rtas.h>
#include <asm/plpar_wrappers.h>
#include <asm/pSeries_reconfig.h>
+#include <asm/mpic.h>
-#include "mpic.h"
#include "bpa_iic.h"
#ifdef DEBUG
diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c
index bb0c3bf..497c3cd9 100644
--- a/arch/ppc64/kernel/pmac_setup.c
+++ b/arch/ppc64/kernel/pmac_setup.c
@@ -72,9 +72,9 @@
#include <asm/lmb.h>
#include <asm/smu.h>
#include <asm/pmc.h>
+#include <asm/mpic.h>
#include "pmac.h"
-#include "mpic.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c
index 9fd23ea..3a1683f 100644
--- a/arch/ppc64/kernel/pmac_smp.c
+++ b/arch/ppc64/kernel/pmac_smp.c
@@ -51,8 +51,7 @@
#include <asm/cacheflush.h>
#include <asm/keylargo.h>
#include <asm/pmac_low_i2c.h>
-
-#include "mpic.h"
+#include <asm/mpic.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c
index 4a9719b..4d920dd 100644
--- a/arch/ppc64/kernel/rtas_pci.c
+++ b/arch/ppc64/kernel/rtas_pci.c
@@ -38,8 +38,8 @@
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/rtas.h>
+#include <asm/mpic.h>
-#include "mpic.h"
#include "pci.h"
/* RTAS tokens */
diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c
index 793b562..6f4f3da 100644
--- a/arch/ppc64/kernel/smp.c
+++ b/arch/ppc64/kernel/smp.c
@@ -45,8 +45,7 @@
#include <asm/cputable.h>
#include <asm/system.h>
#include <asm/abs_addr.h>
-
-#include "mpic.h"
+#include <asm/mpic.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c
index 5c4647b..a728c9f 100644
--- a/arch/ppc64/kernel/traps.c
+++ b/arch/ppc64/kernel/traps.c
@@ -62,7 +62,7 @@
EXPORT_SYMBOL(__debugger_fault_handler);
#endif
-struct notifier_block *ppc64_die_chain;
+struct notifier_block *powerpc_die_chain;
static DEFINE_SPINLOCK(die_notifier_lock);
int register_die_notifier(struct notifier_block *nb)
@@ -71,7 +71,7 @@
unsigned long flags;
spin_lock_irqsave(&die_notifier_lock, flags);
- err = notifier_chain_register(&ppc64_die_chain, nb);
+ err = notifier_chain_register(&powerpc_die_chain, nb);
spin_unlock_irqrestore(&die_notifier_lock, flags);
return err;
}
diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h
index 7c55abf..9dcbac6 100644
--- a/include/asm-powerpc/kdebug.h
+++ b/include/asm-powerpc/kdebug.h
@@ -1,5 +1,5 @@
-#ifndef _POWERPC_KDEBUG_H
-#define _POWERPC_KDEBUG_H 1
+#ifndef _ASM_POWERPC_KDEBUG_H
+#define _ASM_POWERPC_KDEBUG_H
/* nearly identical to x86_64/i386 code */
@@ -39,4 +39,4 @@
return notifier_call_chain(&powerpc_die_chain, val, &args);
}
-#endif
+#endif /* _ASM_POWERPC_KDEBUG_H */
diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h
index d9129d2..b2f09f1 100644
--- a/include/asm-powerpc/kprobes.h
+++ b/include/asm-powerpc/kprobes.h
@@ -1,8 +1,7 @@
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
+#ifndef _ASM_POWERPC_KPROBES_H
+#define _ASM_POWERPC_KPROBES_H
/*
* Kernel Probes (KProbes)
- * include/asm-ppc64/kprobes.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -64,4 +63,4 @@
return 0;
}
#endif
-#endif /* _ASM_KPROBES_H */
+#endif /* _ASM_POWERPC_KPROBES_H */
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index f1e24f4..6b558ae 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -1,3 +1,6 @@
+#ifndef _ASM_POWERPC_MPIC_H
+#define _ASM_POWERPC_MPIC_H
+
#include <linux/irq.h>
/*
@@ -277,3 +280,5 @@
/* global mpic for pSeries */
extern struct mpic *pSeries_mpic;
+
+#endif /* _ASM_POWERPC_MPIC_H */
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index f97a5f1..1402a2d 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -6,9 +6,9 @@
* Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
*/
+#ifndef _ASM_POWERPC_REGS_H
+#define _ASM_POWERPC_REGS_H
#ifdef __KERNEL__
-#ifndef __ASM_PPC_REGS_H__
-#define __ASM_PPC_REGS_H__
#include <linux/stringify.h>
@@ -442,5 +442,5 @@
#define proc_trap() asm volatile("trap")
#endif /* __ASSEMBLY__ */
-#endif /* __ASM_PPC_REGS_H__ */
#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_REGS_H */
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index be542ef..1b64879 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -1,8 +1,8 @@
/*
* Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
*/
-#ifndef __PPC_SYSTEM_H
-#define __PPC_SYSTEM_H
+#ifndef _ASM_POWERPC_SYSTEM_H
+#define _ASM_POWERPC_SYSTEM_H
#include <linux/config.h>
#include <linux/kernel.h>
@@ -347,4 +347,4 @@
#define arch_align_stack(x) (x)
#endif /* __KERNEL__ */
-#endif /* __PPC_SYSTEM_H */
+#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/include/asm-ppc/reg.h b/include/asm-ppc/reg.h
deleted file mode 100644
index 73c33e3..0000000
--- a/include/asm-ppc/reg.h
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * Contains the definition of registers common to all PowerPC variants.
- * If a register definition has been changed in a different PowerPC
- * variant, we will case it in #ifndef XXX ... #endif, and have the
- * number used in the Programming Environments Manual For 32-Bit
- * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_REGS_H__
-#define __ASM_PPC_REGS_H__
-
-#include <linux/stringify.h>
-
-/* Pickup Book E specific registers. */
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-#include <asm/reg_booke.h>
-#endif
-
-/* Machine State Register (MSR) Fields */
-#define MSR_SF (1<<63)
-#define MSR_ISF (1<<61)
-#define MSR_VEC (1<<25) /* Enable AltiVec */
-#define MSR_POW (1<<18) /* Enable Power Management */
-#define MSR_WE (1<<18) /* Wait State Enable */
-#define MSR_TGPR (1<<17) /* TLB Update registers in use */
-#define MSR_CE (1<<17) /* Critical Interrupt Enable */
-#define MSR_ILE (1<<16) /* Interrupt Little Endian */
-#define MSR_EE (1<<15) /* External Interrupt Enable */
-#define MSR_PR (1<<14) /* Problem State / Privilege Level */
-#define MSR_FP (1<<13) /* Floating Point enable */
-#define MSR_ME (1<<12) /* Machine Check Enable */
-#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */
-#define MSR_SE (1<<10) /* Single Step */
-#define MSR_BE (1<<9) /* Branch Trace */
-#define MSR_DE (1<<9) /* Debug Exception Enable */
-#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */
-#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */
-#define MSR_IR (1<<5) /* Instruction Relocate */
-#define MSR_DR (1<<4) /* Data Relocate */
-#define MSR_PE (1<<3) /* Protection Enable */
-#define MSR_PX (1<<2) /* Protection Exclusive Mode */
-#define MSR_RI (1<<1) /* Recoverable Exception */
-#define MSR_LE (1<<0) /* Little Endian */
-
-/* Default MSR for kernel mode. */
-#ifdef CONFIG_APUS_FAST_EXCEPT
-#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
-#endif
-
-#ifndef MSR_KERNEL
-#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
-#endif
-
-#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
-
-/* Floating Point Status and Control Register (FPSCR) Fields */
-#define FPSCR_FX 0x80000000 /* FPU exception summary */
-#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
-#define FPSCR_VX 0x20000000 /* Invalid operation summary */
-#define FPSCR_OX 0x10000000 /* Overflow exception summary */
-#define FPSCR_UX 0x08000000 /* Underflow exception summary */
-#define FPSCR_ZX 0x04000000 /* Zero-devide exception summary */
-#define FPSCR_XX 0x02000000 /* Inexact exception summary */
-#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
-#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
-#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
-#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
-#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
-#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
-#define FPSCR_FR 0x00040000 /* Fraction rounded */
-#define FPSCR_FI 0x00020000 /* Fraction inexact */
-#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
-#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
-#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
-#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
-#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
-#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
-#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
-#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
-#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
-#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
-#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
-#define FPSCR_RN 0x00000003 /* FPU rounding control */
-
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_CTR 0x009 /* Count Register */
-#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
-#define SPRN_DAR 0x013 /* Data Address Register */
-#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
-#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
-#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
-#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
-#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
-#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
-#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
-#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
-#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
-#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
-#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
-#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
-#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
-#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
-#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
-#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
-#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
-#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
-#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
-#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
-#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */
-
-#define SPRN_DEC 0x016 /* Decrement Register */
-#define SPRN_DER 0x095 /* Debug Enable Regsiter */
-#define DER_RSTE 0x40000000 /* Reset Interrupt */
-#define DER_CHSTPE 0x20000000 /* Check Stop */
-#define DER_MCIE 0x10000000 /* Machine Check Interrupt */
-#define DER_EXTIE 0x02000000 /* External Interrupt */
-#define DER_ALIE 0x01000000 /* Alignment Interrupt */
-#define DER_PRIE 0x00800000 /* Program Interrupt */
-#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */
-#define DER_DECIE 0x00200000 /* Decrementer Interrupt */
-#define DER_SYSIE 0x00040000 /* System Call Interrupt */
-#define DER_TRE 0x00020000 /* Trace Interrupt */
-#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */
-#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */
-#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */
-#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */
-#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */
-#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */
-#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */
-#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
-#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
-#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
-#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
-#define SPRN_EAR 0x11A /* External Address Register */
-#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
-#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
-#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
-#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
-#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
-#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
-#define HID0_SBCLK (1<<27)
-#define HID0_EICE (1<<26)
-#define HID0_TBEN (1<<26) /* Timebase enable - 745x */
-#define HID0_ECLK (1<<25)
-#define HID0_PAR (1<<24)
-#define HID0_STEN (1<<24) /* Software table search enable - 745x */
-#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */
-#define HID0_DOZE (1<<23)
-#define HID0_NAP (1<<22)
-#define HID0_SLEEP (1<<21)
-#define HID0_DPM (1<<20)
-#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */
-#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */
-#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/
-#define HID0_ICE (1<<15) /* Instruction Cache Enable */
-#define HID0_DCE (1<<14) /* Data Cache Enable */
-#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<12) /* Data Cache Lock */
-#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
-#define HID0_DCI (1<<10) /* Data Cache Invalidate */
-#define HID0_SPD (1<<9) /* Speculative disable */
-#define HID0_DAPUEN (1<<8) /* Debug APU enable */
-#define HID0_SGE (1<<7) /* Store Gathering Enable */
-#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
-#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
-#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
-#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
-#define HID0_ABE (1<<3) /* Address Broadcast Enable */
-#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */
-#define HID0_BHTE (1<<2) /* Branch History Table Enable */
-#define HID0_BTCD (1<<1) /* Branch target cache disable */
-#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
-#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
-
-#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
-#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
-#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
-#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
-#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */
-#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */
-#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */
-#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
-#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
-#define HID1_PS (1<<16) /* 750FX PLL selection */
-#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
-#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
-#define SPRN_HID4 0x3F4 /* 970 HID4 */
-#define SPRN_HID5 0x3F6 /* 970 HID5 */
-#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
-#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
-#endif
-#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
-#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
-#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
-#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
-#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
-#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
-#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
-#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
-#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
-#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
-#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
-#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
-#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
-#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
-#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
-#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
-#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
-#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
-#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */
-#define ICTRL_EICE 0x08000000 /* enable icache parity errs */
-#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */
-#define ICTRL_EICP 0x00000100 /* enable icache par. check */
-#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
-#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
-#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
-#define SPRN_L2CR2 0x3f8
-#define L2CR_L2E 0x80000000 /* L2 enable */
-#define L2CR_L2PE 0x40000000 /* L2 parity enable */
-#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */
-#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */
-#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */
-#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */
-#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */
-#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */
-#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */
-#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */
-#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */
-#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */
-#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */
-#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */
-#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */
-#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */
-#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */
-#define L2CR_L2DO 0x00400000 /* L2 data only */
-#define L2CR_L2I 0x00200000 /* L2 global invalidate */
-#define L2CR_L2CTL 0x00100000 /* L2 RAM control */
-#define L2CR_L2WT 0x00080000 /* L2 write-through */
-#define L2CR_L2TS 0x00040000 /* L2 test support */
-#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */
-#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */
-#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */
-#define L2CR_L2SL 0x00008000 /* L2 DLL slow */
-#define L2CR_L2DF 0x00004000 /* L2 differential clock */
-#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */
-#define L2CR_L2IP 0x00000001 /* L2 GI in progress */
-#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */
-#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */
-#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */
-#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */
-#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */
-#define L3CR_L3E 0x80000000 /* L3 enable */
-#define L3CR_L3PE 0x40000000 /* L3 data parity enable */
-#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */
-#define L3CR_L3SIZ 0x10000000 /* L3 size */
-#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */
-#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */
-#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */
-#define L3CR_L3IO 0x00400000 /* L3 instruction only */
-#define L3CR_L3SPO 0x00040000 /* L3 sample point override */
-#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */
-#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */
-#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */
-#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */
-#define L3CR_L3I 0x00000400 /* L3 global invalidate */
-#define L3CR_L3RT 0x00000300 /* L3 SRAM type */
-#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */
-#define L3CR_L3DO 0x00000040 /* L3 data only mode */
-#define L3CR_PMEN 0x00000004 /* L3 private memory enable */
-#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */
-#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */
-#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */
-#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */
-#define SPRN_LDSTDB 0x3f4 /* */
-#define SPRN_LR 0x008 /* Link Register */
-#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
-#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
-#ifndef SPRN_PIR
-#define SPRN_PIR 0x3FF /* Processor Identification Register */
-#endif
-#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
-#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
-#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
-#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
-#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
-#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
-#define SPRN_PVR 0x11F /* Processor Version Register */
-#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
-#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
-#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
-#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
-#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
-#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
-#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
-#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
-#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
-#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
-#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
-#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
-#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
-#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
-#ifndef SPRN_SVR
-#define SPRN_SVR 0x11E /* System Version Register */
-#endif
-#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
-/* these bits were defined in inverted endian sense originally, ugh, confusing */
-#define THRM1_TIN (1 << 31)
-#define THRM1_TIV (1 << 30)
-#define THRM1_THRES(x) ((x&0x7f)<<23)
-#define THRM3_SITV(x) ((x&0x3fff)<<1)
-#define THRM1_TID (1<<2)
-#define THRM1_TIE (1<<1)
-#define THRM1_V (1<<0)
-#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
-#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
-#define THRM3_E (1<<0)
-#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
-#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
-#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
-#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
-#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
-#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
-#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
-#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
-#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
-#define SPRN_XER 0x001 /* Fixed Point Exception Register */
-
-/* Bit definitions for MMCR0 and PMC1 / PMC2. */
-#define MMCR0_PMC1_CYCLES (1 << 7)
-#define MMCR0_PMC1_ICACHEMISS (5 << 7)
-#define MMCR0_PMC1_DTLB (6 << 7)
-#define MMCR0_PMC2_DCACHEMISS 0x6
-#define MMCR0_PMC2_CYCLES 0x1
-#define MMCR0_PMC2_ITLB 0x7
-#define MMCR0_PMC2_LOADMISSTIME 0x5
-#define MMCR0_PMXE (1 << 26)
-
-/* Processor Version Register */
-
-/* Processor Version Register (PVR) field extraction */
-
-#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
-#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
-
-/*
- * IBM has further subdivided the standard PowerPC 16-bit version and
- * revision subfields of the PVR for the PowerPC 403s into the following:
- */
-
-#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
-#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
-#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
-#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
-#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
-#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
-
-/* Processor Version Numbers */
-
-#define PVR_403GA 0x00200000
-#define PVR_403GB 0x00200100
-#define PVR_403GC 0x00200200
-#define PVR_403GCX 0x00201400
-#define PVR_405GP 0x40110000
-#define PVR_STB03XXX 0x40310000
-#define PVR_NP405H 0x41410000
-#define PVR_NP405L 0x41610000
-#define PVR_601 0x00010000
-#define PVR_602 0x00050000
-#define PVR_603 0x00030000
-#define PVR_603e 0x00060000
-#define PVR_603ev 0x00070000
-#define PVR_603r 0x00071000
-#define PVR_604 0x00040000
-#define PVR_604e 0x00090000
-#define PVR_604r 0x000A0000
-#define PVR_620 0x00140000
-#define PVR_740 0x00080000
-#define PVR_750 PVR_740
-#define PVR_740P 0x10080000
-#define PVR_750P PVR_740P
-#define PVR_7400 0x000C0000
-#define PVR_7410 0x800C0000
-#define PVR_7450 0x80000000
-#define PVR_8540 0x80200000
-#define PVR_8560 0x80200000
-/*
- * For the 8xx processors, all of them report the same PVR family for
- * the PowerPC core. The various versions of these processors must be
- * differentiated by the version number in the Communication Processor
- * Module (CPM).
- */
-#define PVR_821 0x00500000
-#define PVR_823 PVR_821
-#define PVR_850 PVR_821
-#define PVR_860 PVR_821
-#define PVR_8240 0x00810100
-#define PVR_8245 0x80811014
-#define PVR_8260 PVR_8240
-
-#if 0
-/* Segment Registers */
-#define SR0 0
-#define SR1 1
-#define SR2 2
-#define SR3 3
-#define SR4 4
-#define SR5 5
-#define SR6 6
-#define SR7 7
-#define SR8 8
-#define SR9 9
-#define SR10 10
-#define SR11 11
-#define SR12 12
-#define SR13 13
-#define SR14 14
-#define SR15 15
-#endif
-
-/* Macros for setting and retrieving special purpose registers */
-#ifndef __ASSEMBLY__
-#define mfmsr() ({unsigned int rval; \
- asm volatile("mfmsr %0" : "=r" (rval)); rval;})
-#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v))
-
-#define mfspr(rn) ({unsigned int rval; \
- asm volatile("mfspr %0," __stringify(rn) \
- : "=r" (rval)); rval;})
-#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
-
-#define mfsrin(v) ({unsigned int rval; \
- asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
- rval;})
-
-#define proc_trap() asm volatile("trap")
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_PPC_REGS_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/kdebug.h b/include/asm-ppc64/kdebug.h
deleted file mode 100644
index d383d16..0000000
--- a/include/asm-ppc64/kdebug.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _PPC64_KDEBUG_H
-#define _PPC64_KDEBUG_H 1
-
-/* nearly identical to x86_64/i386 code */
-
-#include <linux/notifier.h>
-
-struct pt_regs;
-
-struct die_args {
- struct pt_regs *regs;
- const char *str;
- long err;
- int trapnr;
- int signr;
-};
-
-/*
- Note - you should never unregister because that can race with NMIs.
- If you really want to do it first unregister - then synchronize_sched -
- then free.
- */
-int register_die_notifier(struct notifier_block *nb);
-extern struct notifier_block *ppc64_die_chain;
-
-/* Grossly misnamed. */
-enum die_val {
- DIE_OOPS = 1,
- DIE_IABR_MATCH,
- DIE_DABR_MATCH,
- DIE_BPT,
- DIE_SSTEP,
- DIE_GPF,
- DIE_PAGE_FAULT,
-};
-
-static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig)
-{
- struct die_args args = { .regs=regs, .str=str, .err=err, .trapnr=trap,.signr=sig };
- return notifier_call_chain(&ppc64_die_chain, val, &args);
-}
-
-#endif
diff --git a/include/asm-ppc64/kprobes.h b/include/asm-ppc64/kprobes.h
deleted file mode 100644
index d9129d2..0000000
--- a/include/asm-ppc64/kprobes.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
-/*
- * Kernel Probes (KProbes)
- * include/asm-ppc64/kprobes.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
- * Probes initial implementation ( includes suggestions from
- * Rusty Russell).
- * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli
- * <ananth@in.ibm.com>
- */
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-struct pt_regs;
-
-typedef unsigned int kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */
-#define MAX_INSN_SIZE 1
-
-#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008)
-#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088)
-#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000)
-#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000)
-
-#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)((func_descr_t *)pentry)
-
-#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \
- IS_TWI(instr) || IS_TDI(instr))
-
-#define ARCH_SUPPORTS_KRETPROBES
-void kretprobe_trampoline(void);
-
-/* Architecture specific copy of original instruction */
-struct arch_specific_insn {
- /* copy of original instruction */
- kprobe_opcode_t *insn;
-};
-
-#ifdef CONFIG_KPROBES
-extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-#else /* !CONFIG_KPROBES */
-static inline int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data)
-{
- return 0;
-}
-#endif
-#endif /* _ASM_KPROBES_H */