| /* |
| |
| bttv-cards.c |
| |
| this file has configuration informations - card-specific stuff |
| like the big tvcards array for the most part |
| |
| Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) |
| & Marcus Metzler (mocm@thp.uni-koeln.de) |
| (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kmod.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/vmalloc.h> |
| #include <linux/firmware.h> |
| |
| #include <asm/io.h> |
| |
| #include "bttvp.h" |
| #include <media/v4l2-common.h> |
| |
| /* fwd decl */ |
| static void boot_msp34xx(struct bttv *btv, int pin); |
| static void boot_bt832(struct bttv *btv); |
| static void hauppauge_eeprom(struct bttv *btv); |
| static void avermedia_eeprom(struct bttv *btv); |
| static void osprey_eeprom(struct bttv *btv); |
| static void modtec_eeprom(struct bttv *btv); |
| static void init_PXC200(struct bttv *btv); |
| static void init_RTV24(struct bttv *btv); |
| |
| static void winview_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, |
| int set); |
| static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, |
| int set); |
| static void terratv_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void windvr_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set); |
| static void rv605_muxsel(struct bttv *btv, unsigned int input); |
| static void eagle_muxsel(struct bttv *btv, unsigned int input); |
| static void xguard_muxsel(struct bttv *btv, unsigned int input); |
| static void ivc120_muxsel(struct bttv *btv, unsigned int input); |
| static void gvc1100_muxsel(struct bttv *btv, unsigned int input); |
| |
| static void PXC200_muxsel(struct bttv *btv, unsigned int input); |
| |
| static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); |
| static void picolo_tetra_init(struct bttv *btv); |
| |
| static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); |
| static void tibetCS16_init(struct bttv *btv); |
| |
| static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); |
| static void kodicom4400r_init(struct bttv *btv); |
| |
| static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); |
| static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); |
| |
| static int terratec_active_radio_upgrade(struct bttv *btv); |
| static int tea5757_read(struct bttv *btv); |
| static int tea5757_write(struct bttv *btv, int value); |
| static void identify_by_eeprom(struct bttv *btv, |
| unsigned char eeprom_data[256]); |
| static int __devinit pvr_boot(struct bttv *btv); |
| |
| /* config variables */ |
| static unsigned int triton1=0; |
| static unsigned int vsfx=0; |
| static unsigned int latency = UNSET; |
| int no_overlay=-1; |
| |
| static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; |
| static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; |
| static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; |
| static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; |
| static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; |
| static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; |
| #ifdef MODULE |
| static unsigned int autoload = 1; |
| #else |
| static unsigned int autoload = 0; |
| #endif |
| static unsigned int gpiomask = UNSET; |
| static unsigned int audioall = UNSET; |
| static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; |
| |
| /* insmod options */ |
| module_param(triton1, int, 0444); |
| module_param(vsfx, int, 0444); |
| module_param(no_overlay, int, 0444); |
| module_param(latency, int, 0444); |
| module_param(gpiomask, int, 0444); |
| module_param(audioall, int, 0444); |
| module_param(autoload, int, 0444); |
| |
| module_param_array(card, int, NULL, 0444); |
| module_param_array(pll, int, NULL, 0444); |
| module_param_array(tuner, int, NULL, 0444); |
| module_param_array(svhs, int, NULL, 0444); |
| module_param_array(remote, int, NULL, 0444); |
| module_param_array(audiomux, int, NULL, 0444); |
| |
| MODULE_PARM_DESC(triton1,"set ETBF pci config bit " |
| "[enable bug compatibility for triton1 + others]"); |
| MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " |
| "[yet another chipset flaw workaround]"); |
| MODULE_PARM_DESC(latency,"pci latency timer"); |
| MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); |
| MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); |
| MODULE_PARM_DESC(tuner,"specify installed tuner type"); |
| MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)"); |
| |
| /* ----------------------------------------------------------------------- */ |
| /* list of card IDs for bt878+ cards */ |
| |
| static struct CARD { |
| unsigned id; |
| int cardnr; |
| char *name; |
| } cards[] __devinitdata = { |
| { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, |
| { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, |
| { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, |
| { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, |
| { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, |
| { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, |
| { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, |
| { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, |
| { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, |
| |
| { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, |
| { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, |
| |
| { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, |
| { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, |
| { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, |
| { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, |
| { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, |
| { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, |
| { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, |
| { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, |
| { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, |
| |
| { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, |
| /* some cards ship with byteswapped IDs ... */ |
| { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, |
| { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, |
| /* this seems to happen as well ... */ |
| { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, |
| |
| { 0x3000121a, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, |
| { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, |
| { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, |
| |
| { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, |
| { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, |
| { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, |
| { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, |
| { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, |
| { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, |
| { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, |
| |
| { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, |
| { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, |
| { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, |
| { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, |
| { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, |
| |
| { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, |
| { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, |
| { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, |
| { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, |
| |
| { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, |
| { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, |
| /* clashes with FlyVideo |
| *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ |
| { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, |
| { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ |
| { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ |
| { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ |
| |
| { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, |
| { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, |
| { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, |
| { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, |
| { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, |
| |
| { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, |
| { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, |
| { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, |
| { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, |
| { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, |
| |
| { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, |
| { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, |
| { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, |
| { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, |
| |
| { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, |
| { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, |
| { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, |
| { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, |
| |
| { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, |
| { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, |
| { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, |
| { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, |
| { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, |
| { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, |
| { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, |
| { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, |
| { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, |
| { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, |
| { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, |
| |
| { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, |
| { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, |
| |
| { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, |
| { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, |
| { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, |
| { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, |
| { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, |
| { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, |
| |
| { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, |
| { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, |
| |
| { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, |
| { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, |
| { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, |
| { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" }, |
| { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, |
| { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, |
| { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, |
| { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, |
| { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, |
| { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, |
| |
| { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, |
| { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, |
| |
| { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, |
| { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, |
| { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, |
| { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, |
| |
| { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, |
| |
| /* likely broken, vendor id doesn't match the other magic views ... |
| * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ |
| |
| /* Duplicate PCI ID, reconfigure for this board during the eeprom read. |
| * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ |
| |
| /* DVB cards (using pci function .1 for mpeg data xfer) */ |
| { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, |
| { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, |
| { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, |
| { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, |
| { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, |
| { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, |
| { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, |
| { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, |
| { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, |
| |
| { 0, -1, NULL } |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| /* array with description for bt848 / bt878 tv/grabber cards */ |
| |
| struct tvcard bttv_tvcards[] = { |
| /* ---- card 0x00 ---------------------------------- */ |
| [BTTV_BOARD_UNKNOWN] = { |
| .name = " *** UNKNOWN/GENERIC *** ", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 0 }, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MIRO] = { |
| .name = "MIRO PCTV", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 2, 0, 0, 0, 10 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_HAUPPAUGE] = { |
| .name = "Hauppauge (bt848)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 1, 2, 3, 4 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_STB] = { |
| .name = "STB, Gateway P/N 6000699 (bt848)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 4, 0, 2, 3, 1 }, |
| .no_msp34xx = 1, |
| .needs_tvaudio = 1, |
| .tuner_type = TUNER_PHILIPS_NTSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| .has_radio = 1, |
| }, |
| |
| /* ---- card 0x04 ---------------------------------- */ |
| [BTTV_BOARD_INTEL] = { |
| .name = "Intel Create and Share PCI/ Smart Video Recorder III", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 2, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 0, |
| .tuner_type = 4, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_DIAMOND] = { |
| .name = "Diamond DTV2000", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 3, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 0, 1, 0, 1, 3 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_AVERMEDIA] = { |
| .name = "AVerMedia TVPhone", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 3, |
| .muxsel = { 2, 3, 1, 1 }, |
| .gpiomask = 0x0f, |
| .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0 }, |
| /* 0x04 for some cards ?? */ |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = avermedia_tvphone_audio, |
| .has_remote = 1, |
| }, |
| [BTTV_BOARD_MATRIX_VISION] = { |
| .name = "MATRIX-Vision MV-Delta", |
| .video_inputs = 5, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 3, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 0, 0 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x08 ---------------------------------- */ |
| [BTTV_BOARD_FLYVIDEO] = { |
| .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xc00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_TURBOTV] = { |
| .name = "IMS/IXmicro TurboTV", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 3, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 1, 1, 2, 3, 0 }, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = TUNER_TEMIC_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_HAUPPAUGE878] = { |
| .name = "Hauppauge (bt878)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x0f, /* old: 7 */ |
| .muxsel = { 2, 0, 1, 1 }, |
| .audiomux = { 0, 1, 2, 3, 4 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MIROPRO] = { |
| .name = "MIRO PCTV pro", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x3014f, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x20001,0x10001, 0, 0,10 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x0c ---------------------------------- */ |
| [BTTV_BOARD_ADSTECH_TV] = { |
| .name = "ADS Technologies Channel Surfer TV (bt848)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 13, 14, 11, 7, 0, 0 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_AVERMEDIA98] = { |
| .name = "AVerMedia TVCapture 98", |
| .video_inputs = 3, |
| .audio_inputs = 4, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 13, 14, 11, 7, 0, 0 }, |
| .needs_tvaudio = 1, |
| .msp34xx_alt = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = avermedia_tv_stereo_audio, |
| .no_gpioirq = 1, |
| }, |
| [BTTV_BOARD_VHX] = { |
| .name = "Aimslab Video Highway Xtreme (VHX)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 2, 1, 3, 4 }, /* old: {0, 1, 2, 3, 4} */ |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_ZOLTRIX] = { |
| .name = "Zoltrix TV-Max", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0 , 0, 1 , 0, 10 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x10 ---------------------------------- */ |
| [BTTV_BOARD_PIXVIEWPLAYTV] = { |
| .name = "Prolink Pixelview PlayTV (bt878)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x01fe00, |
| .muxsel = { 2, 3, 1, 1 }, |
| #if 0 |
| /* old */ |
| .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 }, |
| #else |
| /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ |
| .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, |
| #endif |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| }, |
| [BTTV_BOARD_WINVIEW_601] = { |
| .name = "Leadtek WinView 601", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x8300f8, |
| .muxsel = { 2, 3, 1, 1,0 }, |
| .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = winview_audio, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_AVEC_INTERCAP] = { |
| .name = "AVEC Intercapture", |
| .video_inputs = 3, |
| .audio_inputs = 2, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 1, 0, 0, 0, 0 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_LIFE_FLYKIT] = { |
| .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0x8dff00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0 }, |
| .no_msp34xx = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x14 ---------------------------------- */ |
| [BTTV_BOARD_CEI_RAFFLES] = { |
| .name = "CEI Raffles Card", |
| .video_inputs = 3, |
| .audio_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 1 }, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_CONFERENCETV] = { |
| .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", |
| .video_inputs = 4, |
| .audio_inputs = 2, /* tuner, line in */ |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1800, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL_I, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_PHOEBE_TVMAS] = { |
| .name = "Askey CPH050/ Phoebe Tv Master + FM", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xc00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 1, 0x800, 0x400, 0xc00, 0 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MODTEC_205] = { |
| .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = -1, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, -1 }, |
| .digital_mode = DIGITAL_MODE_CAMERA, |
| .audiomux = { 0, 0, 0, 0, 0 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_ALPS_TSBB5_PAL_I, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x18 ---------------------------------- */ |
| [BTTV_BOARD_MAGICTVIEW061] = { |
| .name = "Askey CPH05X/06X (bt878) [many vendors]", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xe00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| }, |
| [BTTV_BOARD_VOBIS_BOOSTAR] = { |
| .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1f0fff, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000 }, |
| .needs_tvaudio = 0, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = terratv_audio, |
| }, |
| [BTTV_BOARD_HAUPPAUG_WCAM] = { |
| .name = "Hauppauge WinCam newer (bt878)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 3, |
| .gpiomask = 7, |
| .muxsel = { 2, 0, 1, 1 }, |
| .audiomux = { 0, 1, 2, 3, 4 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MAXI] = { |
| .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", |
| .video_inputs = 4, |
| .audio_inputs = 2, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1800, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_SECAM, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x1c ---------------------------------- */ |
| [BTTV_BOARD_TERRATV] = { |
| .name = "Terratec TerraTV+ Version 1.1 (bt878)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1f0fff, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000 }, |
| .needs_tvaudio = 0, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = terratv_audio, |
| /* GPIO wiring: |
| External 20 pin connector (for Active Radio Upgrade board) |
| gpio00: i2c-sda |
| gpio01: i2c-scl |
| gpio02: om5610-data |
| gpio03: om5610-clk |
| gpio04: om5610-wre |
| gpio05: om5610-stereo |
| gpio06: rds6588-davn |
| gpio07: Pin 7 n.c. |
| gpio08: nIOW |
| gpio09+10: nIOR, nSEL ?? (bt878) |
| gpio09: nIOR (bt848) |
| gpio10: nSEL (bt848) |
| Sound Routing: |
| gpio16: u2-A0 (1st 4052bt) |
| gpio17: u2-A1 |
| gpio18: u2-nEN |
| gpio19: u4-A0 (2nd 4052) |
| gpio20: u4-A1 |
| u4-nEN - GND |
| Btspy: |
| 00000 : Cdrom (internal audio input) |
| 10000 : ext. Video audio input |
| 20000 : TV Mono |
| a0000 : TV Mono/2 |
| 1a0000 : TV Stereo |
| 30000 : Radio |
| 40000 : Mute |
| */ |
| |
| }, |
| [BTTV_BOARD_PXC200] = { |
| /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ |
| .name = "Imagenation PXC200", |
| .video_inputs = 5, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 1, /* was: 4 */ |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 0, 0}, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .muxsel_hook = PXC200_muxsel, |
| |
| }, |
| [BTTV_BOARD_FLYVIDEO_98] = { |
| .name = "Lifeview FlyVideo 98 LR50", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1800, /* 0x8dfe00 */ |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_IPROTV] = { |
| .name = "Formac iProTV, Formac ProTV I (bt848)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 3, |
| .gpiomask = 1, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 1, 0, 0, 0, 0 }, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x20 ---------------------------------- */ |
| [BTTV_BOARD_INTEL_C_S_PCI] = { |
| .name = "Intel Create and Share PCI/ Smart Video Recorder III", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 2, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 0, |
| .tuner_type = 4, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_TERRATVALUE] = { |
| .name = "Terratec TerraTValue Version Bt878", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xffff00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x500, 0, 0x300, 0x900, 0x900 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_WINFAST2000] = { |
| .name = "Leadtek WinFast 2000/ WinFast 2000 XP", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */ |
| #if 0 |
| .gpiomask = 0xc33000, |
| .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 }, |
| #else |
| /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ |
| .gpiomask = 0xb33000, |
| .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 }, |
| #endif |
| /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) |
| gpio23 -- hef4052:nEnable (0x800000) |
| gpio12 -- hef4052:A1 |
| gpio13 -- hef4052:A0 |
| 0x0000: external audio |
| 0x1000: FM |
| 0x2000: TV |
| 0x3000: n.c. |
| Note: There exists another variant "Winfast 2000" with tv stereo !? |
| Note: eeprom only contains FF and pci subsystem id 107d:6606 |
| */ |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .has_radio = 1, |
| .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */ |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = winfast2000_audio, |
| .has_remote = 1, |
| }, |
| [BTTV_BOARD_CHRONOS_VS2] = { |
| .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", |
| .video_inputs = 4, |
| .audio_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1800, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x24 ---------------------------------- */ |
| [BTTV_BOARD_TYPHOON_TVIEW] = { |
| .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", |
| .video_inputs = 4, |
| .audio_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1800, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_PXELVWPLTVPRO] = { |
| .name = "Prolink PixelView PlayTV pro", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xff, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MAGICTVIEW063] = { |
| .name = "Askey CPH06X TView99", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x551e00, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = 1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| }, |
| [BTTV_BOARD_PINNACLE] = { |
| .name = "Pinnacle PCTV Studio/Rave", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x03000F, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 2, 0xd0001, 0, 0, 1 }, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x28 ---------------------------------- */ |
| [BTTV_BOARD_STB2] = { |
| .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 4, 0, 2, 3, 1 }, |
| .no_msp34xx = 1, |
| .needs_tvaudio = 1, |
| .tuner_type = TUNER_PHILIPS_NTSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_AVPHONE98] = { |
| .name = "AVerMedia TVPhone 98", |
| .video_inputs = 3, |
| .audio_inputs = 4, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 13, 4, 11, 7, 0, 0 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 1, |
| .audio_hook = avermedia_tvphone_audio, |
| }, |
| [BTTV_BOARD_PV951] = { |
| .name = "ProVideo PV951", /* pic16c54 */ |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 1}, |
| .audiomux = { 0, 0, 0, 0, 0}, |
| .needs_tvaudio = 1, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = 1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_ONAIR_TV] = { |
| .name = "Little OnAir TV", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xe00b, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc }, |
| .no_msp34xx = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x2c ---------------------------------- */ |
| [BTTV_BOARD_SIGMA_TVII_FM] = { |
| .name = "Sigma TVII-FM", |
| .video_inputs = 2, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = -1, |
| .gpiomask = 3, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 1, 1, 0, 2, 3 }, |
| .no_msp34xx = 1, |
| .pll = PLL_NONE, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MATRIX_VISION2] = { |
| .name = "MATRIX-Vision MV-Delta 2", |
| .video_inputs = 5, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 3, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 0, 0 }, |
| .audiomux = { 0 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_ZOLTRIX_GENIE] = { |
| .name = "Zoltrix Genie TV/FM", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xbcf03f, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = 21, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_TERRATVRADIO] = { |
| .name = "Terratec TV/Radio+", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x70000, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 }, |
| .needs_tvaudio = 1, |
| .no_msp34xx = 1, |
| .pll = PLL_35, |
| .tuner_type = 1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 1, |
| }, |
| |
| /* ---- card 0x30 ---------------------------------- */ |
| [BTTV_BOARD_DYNALINK] = { |
| .name = "Askey CPH03x/ Dynalink Magic TView", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = {2,0,0,0,1 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_GVBCTV3PCI] = { |
| .name = "IODATA GV-BCTV3/PCI", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x010f00, |
| .muxsel = {2, 3, 0, 0 }, |
| .audiomux = {0x10000, 0, 0x10000, 0, 0, 0 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_ALPS_TSHC6_NTSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = gvbctv3pci_audio, |
| }, |
| [BTTV_BOARD_PXELVWPLTVPAK] = { |
| .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", |
| .video_inputs = 5, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 3, |
| .gpiomask = 0xAA0000, |
| .muxsel = { 2,3,1,1,-1 }, |
| .digital_mode = DIGITAL_MODE_CAMERA, |
| .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL_I, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| /* GPIO wiring: (different from Rev.4C !) |
| GPIO17: U4.A0 (first hef4052bt) |
| GPIO19: U4.A1 |
| GPIO20: U5.A1 (second hef4052bt) |
| GPIO21: U4.nEN |
| GPIO22: BT832 Reset Line |
| GPIO23: A5,A0, U5,nEN |
| Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 |
| */ |
| }, |
| [BTTV_BOARD_EAGLE] = { |
| .name = "Eagle Wireless Capricorn2 (bt878A)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 7, |
| .muxsel = { 2, 0, 1, 1 }, |
| .audiomux = { 0, 1, 2, 3, 4 }, |
| .pll = PLL_28, |
| .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x34 ---------------------------------- */ |
| [BTTV_BOARD_PINNACLEPRO] = { |
| /* David Härdeman <david@2gen.com> */ |
| .name = "Pinnacle PCTV Studio Pro", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 3, |
| .gpiomask = 0x03000F, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 1, 0xd0001, 0, 0, 10 }, |
| /* sound path (5 sources): |
| MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) |
| 0= ext. Audio IN |
| 1= from MUX2 |
| 2= Mono TV sound from Tuner |
| 3= not connected |
| MUX2 (mask 0x30000): |
| 0,2,3= from MSP34xx |
| 1= FM stereo Radio from Tuner */ |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_TVIEW_RDS_FM] = { |
| /* Claas Langbehn <claas@bigfoot.com>, |
| Sven Grothklags <sven@upb.de> */ |
| .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", |
| .video_inputs = 4, |
| .audio_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1c, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0, 0x10, 8, 4 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_LIFETEC_9415] = { |
| /* Tim Röstermundt <rosterm@uni-muenster.de> |
| in de.comp.os.unix.linux.hardware: |
| options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 |
| audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff |
| options tuner type=5 */ |
| .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x18e0, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 }, |
| /* For cards with tda9820/tda9821: |
| 0x0000: Tuner normal stereo |
| 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) |
| 0x0880: Tuner A2 stereo */ |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_BESTBUY_EASYTV] = { |
| /* Miguel Angel Alvarez <maacruz@navegalia.com> |
| old Easy TV BT848 version (model CPH031) */ |
| .name = "Askey CPH031/ BESTBUY Easy TV", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xF, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 2, 0, 0, 0, 10 }, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = TUNER_TEMIC_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x38 ---------------------------------- */ |
| [BTTV_BOARD_FLYVIDEO_98FM] = { |
| /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ |
| .name = "Lifeview FlyVideo 98FM LR50", |
| .video_inputs = 4, |
| .audio_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1800, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, |
| .pll = PLL_28, |
| .tuner_type = 5, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| /* This is the ultimate cheapo capture card |
| * just a BT848A on a small PCB! |
| * Steve Hosgood <steve@equiinet.com> */ |
| [BTTV_BOARD_GRANDTEC] = { |
| .name = "GrandTec 'Grand Video Capture' (Bt848)", |
| .video_inputs = 2, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 1, |
| .gpiomask = 0, |
| .muxsel = { 3, 1 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 0, |
| .no_msp34xx = 1, |
| .pll = PLL_35, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_ASKEY_CPH060] = { |
| /* Daniel Herrington <daniel.herrington@home.com> */ |
| .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xe00, |
| .muxsel = { 2, 3, 1, 1}, |
| .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_TEMIC_4036FY5_NTSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_ASKEY_CPH03X] = { |
| /* Matti Mottus <mottus@physic.ut.ee> */ |
| .name = "Askey CPH03x TV Capturer", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x03000F, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 2, 0, 0, 0, 1 }, |
| .pll = PLL_28, |
| .tuner_type = 0, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x3c ---------------------------------- */ |
| [BTTV_BOARD_MM100PCTV] = { |
| /* Philip Blundell <philb@gnu.org> */ |
| .name = "Modular Technology MM100PCTV", |
| .video_inputs = 2, |
| .audio_inputs = 2, |
| .tuner = 0, |
| .svhs = -1, |
| .gpiomask = 11, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 2, 0, 0, 1, 8 }, |
| .pll = PLL_35, |
| .tuner_type = TUNER_TEMIC_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_GMV1] = { |
| /* Adrian Cox <adrian@humboldt.co.uk */ |
| .name = "AG Electronics GMV1", |
| .video_inputs = 2, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 1, |
| .gpiomask = 0xF, |
| .muxsel = { 2, 2 }, |
| .audiomux = { }, |
| .no_msp34xx = 1, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_BESTBUY_EASYTV2] = { |
| /* Miguel Angel Alvarez <maacruz@navegalia.com> |
| new Easy TV BT878 version (model CPH061) |
| special thanks to Informatica Mieres for providing the card */ |
| .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", |
| .video_inputs = 3, |
| .audio_inputs = 2, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xFF, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 1, 0, 4, 4, 9 }, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_ATI_TVWONDER] = { |
| /* Lukas Gebauer <geby@volny.cz> */ |
| .name = "ATI TV-Wonder", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xf03f, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe }, |
| .pll = PLL_28, |
| .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x40 ---------------------------------- */ |
| [BTTV_BOARD_ATI_TVWONDERVE] = { |
| /* Lukas Gebauer <geby@volny.cz> */ |
| .name = "ATI TV-Wonder VE", |
| .video_inputs = 2, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = -1, |
| .gpiomask = 1, |
| .muxsel = { 2, 3, 0, 1 }, |
| .audiomux = { 0, 0, 1, 0, 0 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_FLYVIDEO2000] = { |
| /* DeeJay <deejay@westel900.net (2000S) */ |
| .name = "Lifeview FlyVideo 2000S LR90", |
| .video_inputs = 3, |
| .audio_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x18e0, |
| .muxsel = { 2, 3, 0, 1 }, |
| /* Radio changed from 1e80 to 0x800 to make |
| FlyVideo2000S in .hu happy (gm)*/ |
| /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ |
| .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 }, |
| .audio_hook = fv2000s_audio, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = 5, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_TERRATVALUER] = { |
| .name = "Terratec TValueRadio", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0xffff00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_GVBCTV4PCI] = { |
| /* TANAKA Kei <peg00625@nifty.com> */ |
| .name = "IODATA GV-BCTV4/PCI", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x010f00, |
| .muxsel = {2, 3, 0, 0 }, |
| .audiomux = {0x10000, 0, 0x10000, 0, 0, 0 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = gvbctv3pci_audio, |
| }, |
| |
| /* ---- card 0x44 ---------------------------------- */ |
| [BTTV_BOARD_VOODOOTV_FM] = { |
| .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)", |
| /* try "insmod msp3400 simple=0" if you have |
| * sound problems with this card. */ |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = -1, |
| .gpiomask = 0x4f8a00, |
| /* 0x100000: 1=MSP enabled (0=disable again) |
| * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ |
| .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff}, |
| /* tvtuner, radio, external,internal, mute, stereo |
| * tuner, Composit, SVid, Composit-on-Svid-adapter */ |
| .muxsel = { 2, 3 ,0 ,1 }, |
| .tuner_type = TUNER_MT2032, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_AIMMS] = { |
| /* Philip Blundell <pb@nexus.co.uk> */ |
| .name = "Active Imaging AIMMS", |
| .video_inputs = 1, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| .muxsel = { 2 }, |
| .gpiomask = 0 |
| }, |
| [BTTV_BOARD_PV_BT878P_PLUS] = { |
| /* Tomasz Pyra <hellfire@sedez.iq.pl> */ |
| .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", |
| .video_inputs = 3, |
| .audio_inputs = 4, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0, 11, 7, 13, 0 }, /* TV and Radio with same GPIO ! */ |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = 25, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| /* GPIO wiring: |
| GPIO0: U4.A0 (hef4052bt) |
| GPIO1: U4.A1 |
| GPIO2: U4.A1 (second hef4052bt) |
| GPIO3: U4.nEN, U5.A0, A5.nEN |
| GPIO8-15: vrd866b ? |
| */ |
| }, |
| [BTTV_BOARD_FLYVIDEO98EZ] = { |
| .name = "Lifeview FlyVideo 98EZ (capture only) LR51", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */ |
| .pll = PLL_28, |
| .no_msp34xx = 1, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x48 ---------------------------------- */ |
| [BTTV_BOARD_PV_BT878P_9B] = { |
| /* Dariusz Kowalewski <darekk@automex.pl> */ |
| .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x3f, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 }, |
| .needs_tvaudio = 1, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .pll = PLL_28, |
| .tuner_type = 5, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */ |
| .has_radio = 1, /* Note: not all cards have radio */ |
| .has_remote = 1, |
| /* GPIO wiring: |
| GPIO0: A0 hef4052 |
| GPIO1: A1 hef4052 |
| GPIO3: nEN hef4052 |
| GPIO8-15: vrd866b |
| GPIO20,22,23: R30,R29,R28 |
| */ |
| }, |
| [BTTV_BOARD_SENSORAY311] = { |
| /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ |
| /* you must jumper JP5 for the card to work */ |
| .name = "Sensoray 311", |
| .video_inputs = 5, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 4, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 0, 0 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 0, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_RV605] = { |
| /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ |
| .name = "RemoteVision MX (RV605)", |
| .video_inputs = 16, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0x00, |
| .gpiomask2 = 0x07ff, |
| .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03, |
| 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 }, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .muxsel_hook = rv605_muxsel, |
| }, |
| [BTTV_BOARD_POWERCLR_MTV878] = { |
| .name = "Powercolor MTV878/ MTV878R/ MTV878F", |
| .video_inputs = 3, |
| .audio_inputs = 2, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ |
| .muxsel = { 2, 1, 1, }, |
| .audiomux = { 0, 1, 2, 2, 4 }, |
| .needs_tvaudio = 0, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| .has_radio = 1, |
| }, |
| |
| /* ---- card 0x4c ---------------------------------- */ |
| [BTTV_BOARD_WINDVR] = { |
| /* Masaki Suzuki <masaki@btree.org> */ |
| .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x140007, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 1, 2, 3, 4, 0 }, |
| .tuner_type = TUNER_PHILIPS_NTSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = windvr_audio, |
| }, |
| [BTTV_BOARD_GRANDTEC_MULTI] = { |
| .name = "GrandTec Multi Capture Card (Bt878)", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 0, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_KWORLD] = { |
| .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", |
| .video_inputs = 4, |
| .audio_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */ |
| .audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio! |
| * This card lacks external Audio In, so we mute it on Ext. & Int. |
| * The PCB can take a sbx1637/sbx1673, wiring unknown. |
| * This card lacks PCI subsystem ID, sigh. |
| * audiomux=1: lower volume, 2+3: mute |
| * btwincap uses 0x80000/0x80003 |
| */ |
| .needs_tvaudio = 0, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = 5, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and |
| radio signal strength indicators work fine. */ |
| .has_radio = 1, |
| /* GPIO Info: |
| GPIO0,1: HEF4052 A0,A1 |
| GPIO2: HEF4052 nENABLE |
| GPIO3-7: n.c. |
| GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] |
| GPIO14,15: ?? |
| GPIO16-21: n.c. |
| GPIO22,23: ?? |
| ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ |
| }, |
| [BTTV_BOARD_DSP_TCVIDEO] = { |
| /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ |
| .name = "DSP Design TCVIDEO", |
| .video_inputs = 4, |
| .svhs = -1, |
| .muxsel = { 2, 3, 1, 0 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x50 ---------------------------------- */ |
| [BTTV_BOARD_HAUPPAUGEPVR] = { |
| .name = "Hauppauge WinTV PVR", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 0, 1, 1 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| |
| .gpiomask = 7, |
| .audiomux = {7}, |
| }, |
| [BTTV_BOARD_GVBCTV5PCI] = { |
| .name = "IODATA GV-BCTV5/PCI", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x0f0f80, |
| .muxsel = {2, 3, 1, 0 }, |
| .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0}, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_NTSC_M, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = gvbctv5pci_audio, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_OSPREY1x0] = { |
| .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ |
| .video_inputs = 4, /* id-inputs-clock */ |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 3, |
| .muxsel = { 3, 2, 0, 1 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| [BTTV_BOARD_OSPREY1x0_848] = { |
| .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ |
| .video_inputs = 3, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| |
| /* ---- card 0x54 ---------------------------------- */ |
| [BTTV_BOARD_OSPREY101_848] = { |
| .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ |
| .video_inputs = 2, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 3, 1 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| [BTTV_BOARD_OSPREY1x1] = { |
| .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ |
| .video_inputs = 1, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .muxsel = { 0 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| [BTTV_BOARD_OSPREY1x1_SVID] = { |
| .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ |
| .video_inputs = 2, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 0, 1 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| [BTTV_BOARD_OSPREY2xx] = { |
| .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ |
| .video_inputs = 1, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = -1, |
| .muxsel = { 0 }, |
| .pll = PLL_28, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| |
| /* ---- card 0x58 ---------------------------------- */ |
| [BTTV_BOARD_OSPREY2x0_SVID] = { |
| .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ |
| .video_inputs = 2, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 0, 1 }, |
| .pll = PLL_28, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| [BTTV_BOARD_OSPREY2x0] = { |
| .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */ |
| .video_inputs = 2, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 2, 3 }, |
| .pll = PLL_28, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| [BTTV_BOARD_OSPREY500] = { |
| .name = "Osprey 500", /* 500 */ |
| .video_inputs = 2, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 2, 3 }, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| [BTTV_BOARD_OSPREY540] = { |
| .name = "Osprey 540", /* 540 */ |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = -1, |
| #if 0 /* TODO ... */ |
| .svhs = OSPREY540_SVID_ANALOG, |
| .muxsel = { [OSPREY540_COMP_ANALOG] = 2, |
| [OSPREY540_SVID_ANALOG] = 3, }, |
| #endif |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| #if 0 /* TODO ... */ |
| .muxsel_hook = osprey_540_muxsel, |
| .picture_hook = osprey_540_set_picture, |
| #endif |
| }, |
| |
| /* ---- card 0x5C ---------------------------------- */ |
| [BTTV_BOARD_OSPREY2000] = { |
| .name = "Osprey 2000", /* 2000 */ |
| .video_inputs = 2, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 2, 3 }, |
| .pll = PLL_28, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ |
| }, |
| [BTTV_BOARD_IDS_EAGLE] = { |
| /* M G Berberich <berberic@forwiss.uni-passau.de> */ |
| .name = "IDS Eagle", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .svhs = -1, |
| .gpiomask = 0, |
| .muxsel = { 0, 1, 2, 3 }, |
| .muxsel_hook = eagle_muxsel, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .pll = PLL_28, |
| }, |
| [BTTV_BOARD_PINNACLESAT] = { |
| .name = "Pinnacle PCTV Sat", |
| .video_inputs = 2, |
| .audio_inputs = 0, |
| .svhs = 1, |
| .tuner = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .muxsel = { 3, 0, 1, 2 }, |
| .pll = PLL_28, |
| .no_gpioirq = 1, |
| .has_dvb = 1, |
| }, |
| [BTTV_BOARD_FORMAC_PROTV] = { |
| .name = "Formac ProTV II (bt878)", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 3, |
| .gpiomask = 2, |
| /* TV, Comp1, Composite over SVID con, SVID */ |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 2, 2, 0, 0, 0 }, |
| .pll = PLL_28, |
| .has_radio = 1, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| /* sound routing: |
| GPIO=0x00,0x01,0x03: mute (?) |
| 0x02: both TV and radio (tuner: FM1216/I) |
| The card has onboard audio connectors labeled "cdrom" and "board", |
| not soldered here, though unknown wiring. |
| Card lacks: external audio in, pci subsystem id. |
| */ |
| }, |
| |
| /* ---- card 0x60 ---------------------------------- */ |
| [BTTV_BOARD_MACHTV] = { |
| .name = "MachTV", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = -1, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, 1, 1}, |
| .audiomux = { 0, 1, 2, 3, 4}, |
| .needs_tvaudio = 1, |
| .tuner_type = 5, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| }, |
| [BTTV_BOARD_EURESYS_PICOLO] = { |
| .name = "Euresys Picolo", |
| .video_inputs = 3, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = 2, |
| .gpiomask = 0, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .muxsel = { 2, 0, 1}, |
| .pll = PLL_28, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_PV150] = { |
| /* Luc Van Hoeylandt <luc@e-magic.be> */ |
| .name = "ProVideo PV150", /* 0x4f */ |
| .video_inputs = 2, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0, |
| .muxsel = { 2, 3 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 0, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_AD_TVK503] = { |
| /* Hiroshi Takekawa <sian@big.or.jp> */ |
| /* This card lacks subsystem ID */ |
| .name = "AD-TVK503", /* 0x63 */ |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x001e8007, |
| .muxsel = { 2, 3, 1, 0 }, |
| /* Tuner, Radio, external, internal, off, on */ |
| .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 }, |
| .needs_tvaudio = 0, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = 2, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .audio_hook = adtvk503_audio, |
| }, |
| |
| /* ---- card 0x64 ---------------------------------- */ |
| [BTTV_BOARD_HERCULES_SM_TV] = { |
| .name = "Hercules Smart TV Stereo", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .needs_tvaudio = 1, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = 5, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| /* Notes: |
| - card lacks subsystem ID |
| - stereo variant w/ daughter board with tda9874a @0xb0 |
| - Audio Routing: |
| always from tda9874 independent of GPIO (?) |
| external line in: unknown |
| - Other chips: em78p156elp @ 0x96 (probably IR remote control) |
| hef4053 (instead 4052) for unknown function |
| */ |
| }, |
| [BTTV_BOARD_PACETV] = { |
| .name = "Pace TV & Radio Card", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */ |
| .gpiomask = 0, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .tuner_type = 1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 1, |
| .pll = PLL_28, |
| /* Bt878, Bt832, FI1246 tuner; no pci subsystem id |
| only internal line out: (4pin header) RGGL |
| Radio must be decoded by msp3410d (not routed through)*/ |
| /* |
| .digital_mode = DIGITAL_MODE_CAMERA, todo! |
| */ |
| }, |
| [BTTV_BOARD_IVC200] = { |
| /* Chris Willing <chris@vislab.usyd.edu.au> */ |
| .name = "IVC-200", |
| .video_inputs = 1, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .svhs = -1, |
| .gpiomask = 0xdf, |
| .muxsel = { 2 }, |
| .pll = PLL_28, |
| }, |
| [BTTV_BOARD_XGUARD] = { |
| .name = "Grand X-Guard / Trust 814PCI", |
| .video_inputs = 16, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .tuner_type = 4, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .gpiomask2 = 0xff, |
| .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 }, |
| .muxsel_hook = xguard_muxsel, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .pll = PLL_28, |
| }, |
| |
| /* ---- card 0x68 ---------------------------------- */ |
| [BTTV_BOARD_NEBULA_DIGITV] = { |
| .name = "Nebula Electronics DigiTV", |
| .video_inputs = 1, |
| .tuner = -1, |
| .svhs = -1, |
| .muxsel = { 2, 3, 1, 0 }, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_dvb = 1, |
| .has_remote = 1, |
| .gpiomask = 0x1b, |
| .no_gpioirq = 1, |
| }, |
| [BTTV_BOARD_PV143] = { |
| /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ |
| .name = "ProVideo PV143", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 0 }, |
| .needs_tvaudio = 0, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_VD009X1_MINIDIN] = { |
| /* M.Klahr@phytec.de */ |
| .name = "PHYTEC VD-009-X1 MiniDIN (bt878)", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, /* card has no tuner */ |
| .svhs = 3, |
| .gpiomask = 0x00, |
| .muxsel = { 2, 3, 1, 0 }, |
| .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_VD009X1_COMBI] = { |
| .name = "PHYTEC VD-009-X1 Combi (bt878)", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, /* card has no tuner */ |
| .svhs = 3, |
| .gpiomask = 0x00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| |
| /* ---- card 0x6c ---------------------------------- */ |
| [BTTV_BOARD_VD009_MINIDIN] = { |
| .name = "PHYTEC VD-009 MiniDIN (bt878)", |
| .video_inputs = 10, |
| .audio_inputs = 0, |
| .tuner = -1, /* card has no tuner */ |
| .svhs = 9, |
| .gpiomask = 0x00, |
| .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio |
| via the upper nibble of muxsel. here: used for |
| xternal video-mux */ |
| .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 }, |
| .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_VD009_COMBI] = { |
| .name = "PHYTEC VD-009 Combi (bt878)", |
| .video_inputs = 10, |
| .audio_inputs = 0, |
| .tuner = -1, /* card has no tuner */ |
| .svhs = 9, |
| .gpiomask = 0x00, |
| .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio |
| via the upper nibble of muxsel. here: used for |
| xternal video-mux */ |
| .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 }, |
| .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_IVC100] = { |
| .name = "IVC-100", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .svhs = -1, |
| .gpiomask = 0xdf, |
| .muxsel = { 2, 3, 1, 0 }, |
| .pll = PLL_28, |
| }, |
| [BTTV_BOARD_IVC120] = { |
| /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ |
| .name = "IVC-120G", |
| .video_inputs = 16, |
| .audio_inputs = 0, /* card has no audio */ |
| .tuner = -1, /* card has no tuner */ |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .svhs = -1, /* card has no svhs */ |
| .needs_tvaudio = 0, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .gpiomask = 0x00, |
| .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, |
| 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 }, |
| .muxsel_hook = ivc120_muxsel, |
| .pll = PLL_28, |
| }, |
| |
| /* ---- card 0x70 ---------------------------------- */ |
| [BTTV_BOARD_PC_HDTV] = { |
| .name = "pcHDTV HD-2000 TV", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 0 }, |
| .tuner_type = TUNER_PHILIPS_ATSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_dvb = 1, |
| }, |
| [BTTV_BOARD_TWINHAN_DST] = { |
| .name = "Twinhan DST + clones", |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_video = 1, |
| .has_dvb = 1, |
| }, |
| [BTTV_BOARD_WINFASTVC100] = { |
| .name = "Winfast VC100", |
| .video_inputs = 3, |
| .audio_inputs = 0, |
| .svhs = 1, |
| .tuner = -1, |
| .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */ |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| }, |
| [BTTV_BOARD_TEV560] = { |
| .name = "Teppro TEV-560/InterVision IV-560", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 3, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 1, 1, 1, 1, 0 }, |
| .needs_tvaudio = 1, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_35, |
| }, |
| |
| /* ---- card 0x74 ---------------------------------- */ |
| [BTTV_BOARD_SIMUS_GVC1100] = { |
| .name = "SIMUS GVC1100", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| .muxsel = { 2, 2, 2, 2 }, |
| .gpiomask = 0x3F, |
| .muxsel_hook = gvc1100_muxsel, |
| }, |
| [BTTV_BOARD_NGSTV_PLUS] = { |
| /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ |
| .name = "NGS NGSTV+", |
| .video_inputs = 3, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x008007, |
| .muxsel = { 2, 3, 0, 0 }, |
| .audiomux = { 0, 0, 0, 0, 0x000003, 0 }, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| }, |
| [BTTV_BOARD_LMLBT4] = { |
| /* http://linuxmedialabs.com */ |
| .name = "LMLBT4", |
| .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .muxsel = { 2, 3, 1, 0 }, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .needs_tvaudio = 0, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_TEKRAM_M205] = { |
| /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ |
| .name = "Tekram M205 PRO", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .svhs = 2, |
| .needs_tvaudio = 0, |
| .gpiomask = 0x68, |
| .muxsel = { 2, 3, 1 }, |
| .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 }, |
| .pll = PLL_28, |
| }, |
| |
| /* ---- card 0x78 ---------------------------------- */ |
| [BTTV_BOARD_CONTVFMI] = { |
| /* Javier Cendan Ares <jcendan@lycos.es> */ |
| /* bt878 TV + FM without subsystem ID */ |
| .name = "Conceptronic CONTVFMi", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x008007, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 1, 2, 2, 3 }, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_PICOLO_TETRA_CHIP] = { |
| /*Eric DEBIEF <debief@telemsa.com>*/ |
| /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/ |
| /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ |
| /*0x79 in bttv.h*/ |
| .name = "Euresys Picolo Tetra", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0, |
| .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/ |
| .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ |
| .pll = PLL_28, |
| .needs_tvaudio = 0, |
| .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_SPIRIT_TV] = { |
| /* Spirit TV Tuner from http://spiritmodems.com.au */ |
| /* Stafford Goodsell <surge@goliath.homeunix.org> */ |
| .name = "Spirit TV Tuner", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x0000000f, |
| .muxsel = { 2, 1, 1 }, |
| .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00 }, |
| .tuner_type = TUNER_TEMIC_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| }, |
| [BTTV_BOARD_AVDVBT_771] = { |
| /* Wolfram Joost <wojo@frokaschwei.de> */ |
| .name = "AVerMedia AVerTV DVB-T 771", |
| .video_inputs = 2, |
| .svhs = 1, |
| .tuner = -1, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .muxsel = { 3 , 3 }, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .pll = PLL_28, |
| .has_dvb = 1, |
| .no_gpioirq = 1, |
| .has_remote = 1, |
| }, |
| /* ---- card 0x7c ---------------------------------- */ |
| [BTTV_BOARD_AVDVBT_761] = { |
| /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ |
| /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ |
| .name = "AverMedia AverTV DVB-T 761", |
| .video_inputs = 2, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */ |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_dvb = 1, |
| .no_gpioirq = 1, |
| .has_remote = 1, |
| }, |
| [BTTV_BOARD_MATRIX_VISIONSQ] = { |
| /* andre.schwarz@matrix-vision.de */ |
| .name = "MATRIX Vision Sigma-SQ", |
| .video_inputs = 16, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0x0, |
| .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, |
| 3, 3, 3, 3, 3, 3, 3, 3 }, |
| .muxsel_hook = sigmaSQ_muxsel, |
| .audiomux = { 0 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MATRIX_VISIONSLC] = { |
| /* andre.schwarz@matrix-vision.de */ |
| .name = "MATRIX Vision Sigma-SLC", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0x0, |
| .muxsel = { 2, 2, 2, 2 }, |
| .muxsel_hook = sigmaSLC_muxsel, |
| .audiomux = { 0 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| /* BTTV_BOARD_APAC_VIEWCOMP */ |
| [BTTV_BOARD_APAC_VIEWCOMP] = { |
| /* Attila Kondoros <attila.kondoros@chello.hu> */ |
| /* bt878 TV + FM 0x00000000 subsystem ID */ |
| .name = "APAC Viewcomp 878(AMAX)", |
| .video_inputs = 2, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = -1, |
| .gpiomask = 0xFF, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 2, 0, 0, 0, 10 }, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ |
| .has_radio = 1, /* not every card has radio */ |
| }, |
| |
| /* ---- card 0x80 ---------------------------------- */ |
| [BTTV_BOARD_DVICO_DVBT_LITE] = { |
| /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ |
| .name = "DViCO FusionHDTV DVB-T Lite", |
| .tuner = -1, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .pll = PLL_28, |
| .no_video = 1, |
| .has_dvb = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_VGEAR_MYVCD] = { |
| /* Steven <photon38@pchome.com.tw> */ |
| .name = "V-Gear MyVCD", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x3f, |
| .muxsel = {2, 3, 1, 0 }, |
| .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_PHILIPS_NTSC_M, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 0, |
| #if 0 |
| .has_remote = 1, |
| #endif |
| }, |
| [BTTV_BOARD_SUPER_TV] = { |
| /* Rick C <cryptdragoon@gmail.com> */ |
| .name = "Super TV Tuner", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 0 }, |
| .tuner_type = TUNER_PHILIPS_NTSC, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .gpiomask = 0x008007, |
| .audiomux = { 0, 0x000001,0,0, 0 }, |
| .needs_tvaudio = 1, |
| .has_radio = 1, |
| }, |
| [BTTV_BOARD_TIBET_CS16] = { |
| /* Chris Fanning <video4linux@haydon.net> */ |
| .name = "Tibet Systems 'Progress DVR' CS16", |
| .video_inputs = 16, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }, |
| .pll = PLL_28, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .muxsel_hook = tibetCS16_muxsel, |
| }, |
| [BTTV_BOARD_KODICOM_4400R] = { |
| /* Bill Brack <wbrack@mmm.com.hk> */ |
| /* |
| * Note that, because of the card's wiring, the "master" |
| * BT878A chip (i.e. the one which controls the analog switch |
| * and must use this card type) is the 2nd one detected. The |
| * other 3 chips should use card type 0x85, whose description |
| * follows this one. There is a EEPROM on the card (which is |
| * connected to the I2C of one of those other chips), but is |
| * not currently handled. There is also a facility for a |
| * "monitor", which is also not currently implemented. |
| */ |
| .name = "Kodicom 4400R (master)", |
| .video_inputs = 16, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .svhs = -1, |
| /* GPIO bits 0-9 used for analog switch: |
| * 00 - 03: camera selector |
| * 04 - 06: channel (controller) selector |
| * 07: data (1->on, 0->off) |
| * 08: strobe |
| * 09: reset |
| * bit 16 is input from sync separator for the channel |
| */ |
| .gpiomask = 0x0003ff, |
| .no_gpioirq = 1, |
| .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, |
| .pll = PLL_28, |
| .no_msp34xx = 1, |
| .no_tda7432 = 1, |
| .no_tda9875 = 1, |
| .muxsel_hook = kodicom4400r_muxsel, |
| }, |
| [BTTV_BOARD_KODICOM_4400R_SL] = { |
| /* Bill Brack <wbrack@mmm.com.hk> */ |
| /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the |
| * one which controls the analog switch, and must use the card type) |
| * is the 2nd one detected. The other 3 chips should use this card |
| * type |
| */ |
| .name = "Kodicom 4400R (slave)", |
| .video_inputs = 16, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .svhs = -1, |
| .gpiomask = 0x010000, |
| .no_gpioirq = 1, |
| .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, |
| .pll = PLL_28, |
| .no_msp34xx = 1, |
| .no_tda7432 = 1, |
| .no_tda9875 = 1, |
| .muxsel_hook = kodicom4400r_muxsel, |
| }, |
| /* ---- card 0x86---------------------------------- */ |
| [BTTV_BOARD_ADLINK_RTV24] = { |
| /* Michael Henson <mhenson@clarityvi.com> */ |
| /* Adlink RTV24 with special unlock codes */ |
| .name = "Adlink RTV24", |
| .video_inputs = 4, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1, 0 }, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| }, |
| /* ---- card 0x87---------------------------------- */ |
| [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { |
| /* Michael Krufky <mkrufky@m1k.net> */ |
| .name = "DViCO FusionHDTV 5 Lite", |
| .tuner = 0, |
| .tuner_type = TUNER_LG_TDVS_H062F, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .svhs = 2, |
| .muxsel = { 2, 3, 1 }, |
| .gpiomask = 0x00e00007, |
| .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 }, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .has_dvb = 1, |
| }, |
| /* ---- card 0x88---------------------------------- */ |
| [BTTV_BOARD_ACORP_Y878F] = { |
| /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */ |
| .name = "Acorp Y878F", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x01fe00, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, |
| .tuner_addr = 0xc1 >>1, |
| .radio_addr = 0xc1 >>1, |
| .has_radio = 1, |
| }, |
| /* ---- card 0x89 ---------------------------------- */ |
| [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { |
| .name = "Conceptronic CTVFMi v2", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x001c0007, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 1, 2, 2, 3 }, |
| .needs_tvaudio = 0, |
| .pll = PLL_28, |
| .tuner_type = TUNER_TENA_9533_DI, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| .has_radio = 1, |
| }, |
| /* ---- card 0x8a ---------------------------------- */ |
| [BTTV_BOARD_PV_BT878P_2E] = { |
| .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", |
| .video_inputs = 5, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 3, |
| .gpiomask = 0x01fe00, |
| .muxsel = { 2,3,1,1,-1 }, |
| .digital_mode = DIGITAL_MODE_CAMERA, |
| .audiomux = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_LG_PAL_FM, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_remote = 1, |
| }, |
| /* ---- card 0x8b ---------------------------------- */ |
| [BTTV_BOARD_PV_M4900] = { |
| /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ |
| .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x3f, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, |
| .no_msp34xx = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_YMEC_TVF_5533MF, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .has_radio = 1, |
| .has_remote = 1, |
| }, |
| /* ---- card 0x8c ---------------------------------- */ |
| [BTTV_BOARD_OSPREY440] = { |
| .name = "Osprey 440", |
| .video_inputs = 1, |
| .audio_inputs = 1, |
| .tuner = -1, |
| .svhs = 1, |
| .muxsel = { 2 }, |
| .pll = PLL_28, |
| .tuner_type = UNSET, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| }, |
| /* ---- card 0x8d ---------------------------------- */ |
| [BTTV_BOARD_ASOUND_SKYEYE] = { |
| .name = "Asound Skyeye PCTV", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 15, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = {2,0,0,0,1 }, |
| .needs_tvaudio = 1, |
| .pll = PLL_28, |
| .tuner_type = 2, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| /* ---- card 0x8e ---------------------------------- */ |
| [BTTV_BOARD_SABRENT_TVFM] = { |
| .name = "Sabrent TV-FM (bttv version)", |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 0x108007, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 100000, 100002, 100002, 100000 }, |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .pll = PLL_28, |
| .tuner_type = TUNER_TNF_5335MF, |
| .tuner_addr = ADDR_UNSET, |
| .has_radio = 1, |
| }, |
| /* ---- card 0x8f ---------------------------------- */ |
| [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { |
| .name = "Hauppauge ImpactVCB (bt878)", |
| .video_inputs = 4, |
| .audio_inputs = 0, |
| .tuner = -1, |
| .svhs = -1, |
| .gpiomask = 0x0f, /* old: 7 */ |
| .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */ |
| .no_msp34xx = 1, |
| .no_tda9875 = 1, |
| .no_tda7432 = 1, |
| .tuner_type = -1, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| }, |
| [BTTV_BOARD_MACHTV_MAGICTV] = { |
| /* Julian Calaby <julian.calaby@gmail.com> |
| * Slightly different from original MachTV definition (0x60) |
| |
| * FIXME: RegSpy says gpiomask should be "0x001c800f", but it |
| * stuffs up remote chip. Bug is a pin on the jaecs is not set |
| * properly (methinks) causing no keyup bits being set */ |
| |
| .name = "MagicTV", /* rebranded MachTV */ |
| .video_inputs = 3, |
| .audio_inputs = 1, |
| .tuner = 0, |
| .svhs = 2, |
| .gpiomask = 7, |
| .muxsel = { 2, 3, 1, 1 }, |
| .audiomux = { 0, 1, 2, 3, 4 }, |
| .tuner_type = TUNER_TEMIC_4009FR5_PAL, |
| .tuner_addr = ADDR_UNSET, |
| .radio_addr = ADDR_UNSET, |
| .pll = PLL_28, |
| .has_radio = 1, |
| .has_remote = 1, |
| }, |
| }; |
| |
| static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static unsigned char eeprom_data[256]; |
| |
| /* |
| * identify card |
| */ |
| void __devinit bttv_idcard(struct bttv *btv) |
| { |
| unsigned int gpiobits; |
| int i,type; |
| unsigned short tmp; |
| |
| /* read PCI subsystem ID */ |
| pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp); |
| btv->cardid = tmp << 16; |
| pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp); |
| btv->cardid |= tmp; |
| |
| if (0 != btv->cardid && 0xffffffff != btv->cardid) { |
| /* look for the card */ |
| for (type = -1, i = 0; cards[i].id != 0; i++) |
| if (cards[i].id == btv->cardid) |
| type = i; |
| |
| if (type != -1) { |
| /* found it */ |
| printk(KERN_INFO "bttv%d: detected: %s [card=%d], " |
| "PCI subsystem ID is %04x:%04x\n", |
| btv->c.nr,cards[type].name,cards[type].cardnr, |
| btv->cardid & 0xffff, |
| (btv->cardid >> 16) & 0xffff); |
| btv->c.type = cards[type].cardnr; |
| } else { |
| /* 404 */ |
| printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n", |
| btv->c.nr, btv->cardid & 0xffff, |
| (btv->cardid >> 16) & 0xffff); |
| printk(KERN_DEBUG "please mail id, board name and " |
| "the correct card= insmod option to video4linux-list@redhat.com\n"); |
| } |
| } |
| |
| /* let the user override the autodetected type */ |
| if (card[btv->c.nr] < bttv_num_tvcards) |
| btv->c.type=card[btv->c.nr]; |
| |
| /* print which card config we are using */ |
| printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr, |
| bttv_tvcards[btv->c.type].name, btv->c.type, |
| card[btv->c.nr] < bttv_num_tvcards |
| ? "insmod option" : "autodetected"); |
| |
| /* overwrite gpio stuff ?? */ |
| if (UNSET == audioall && UNSET == audiomux[0]) |
| return; |
| |
| if (UNSET != audiomux[0]) { |
| gpiobits = 0; |
| for (i = 0; i < 5; i++) { |
| bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i]; |
| gpiobits |= audiomux[i]; |
| } |
| } else { |
| gpiobits = audioall; |
| for (i = 0; i < 5; i++) { |
| bttv_tvcards[btv->c.type].audiomux[i] = audioall; |
| } |
| } |
| bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; |
| printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=", |
| btv->c.nr,bttv_tvcards[btv->c.type].gpiomask); |
| for (i = 0; i < 5; i++) { |
| printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]); |
| } |
| printk("\n"); |
| } |
| |
| /* |
| * (most) board specific initialisations goes here |
| */ |
| |
| /* Some Modular Technology cards have an eeprom, but no subsystem ID */ |
| static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) |
| { |
| int type = -1; |
| |
| if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) |
| type = BTTV_BOARD_MODTEC_205; |
| else if (0 == strncmp(eeprom_data+20,"Picolo",7)) |
| type = BTTV_BOARD_EURESYS_PICOLO; |
| else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) |
| type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ |
| |
| if (-1 != type) { |
| btv->c.type = type; |
| printk("bttv%d: detected by eeprom: %s [card=%d]\n", |
| btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); |
| } |
| } |
| |
| static void flyvideo_gpio(struct bttv *btv) |
| { |
| int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821; |
| int tuner=-1,ttype; |
| |
| gpio_inout(0xffffff, 0); |
| udelay(8); /* without this we would see the 0x1800 mask */ |
| gpio = gpio_read(); |
| /* FIXME: must restore OUR_EN ??? */ |
| |
| /* all cards provide GPIO info, some have an additional eeprom |
| * LR50: GPIO coding can be found lower right CP1 .. CP9 |
| * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. |
| * GPIO14-12: n.c. |
| * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) |
| |
| * lowest 3 bytes are remote control codes (no handshake needed) |
| * xxxFFF: No remote control chip soldered |
| * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered |
| * Note: Some bits are Audio_Mask ! |
| */ |
| ttype=(gpio&0x0f0000)>>16; |
| switch(ttype) { |
| case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */ |
| break; |
| case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */ |
| break; |
| case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ |
| break; |
| case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */ |
| break; |
| case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ |
| break; |
| default: |
| printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr); |
| } |
| |
| has_remote = gpio & 0x800000; |
| has_radio = gpio & 0x400000; |
| /* unknown 0x200000; |
| * unknown2 0x100000; */ |
| is_capture_only = !(gpio & 0x008000); /* GPIO15 */ |
| has_tda9820_tda9821 = !(gpio & 0x004000); |
| is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ |
| /* |
| * gpio & 0x001000 output bit for audio routing */ |
| |
| if(is_capture_only) |
| tuner=4; /* No tuner present */ |
| |
| printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", |
| btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio); |
| printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", |
| btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ", |
| is_capture_only?"yes":"no "); |
| |
| if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */ |
| btv->tuner_type = tuner; |
| btv->has_radio = has_radio; |
| |
| /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 |
| * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 |
| * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ |
| if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio; |
| /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */ |
| } |
| |
| static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, |
| 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; |
| static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, |
| 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; |
| |
| static void miro_pinnacle_gpio(struct bttv *btv) |
| { |
| int id,msp,gpio; |
| char *info; |
| |
| gpio_inout(0xffffff, 0); |
| gpio = gpio_read(); |
| id = ((gpio>>10) & 63) -1; |
| msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx"); |
| if (id < 32) { |
| btv->tuner_type = miro_tunermap[id]; |
| if (0 == (gpio & 0x20)) { |
| btv->has_radio = 1; |
| if (!miro_fmtuner[id]) { |
| btv->has_matchbox = 1; |
| btv->mbox_we = (1<<6); |
| btv->mbox_most = (1<<7); |
| btv->mbox_clk = (1<<8); |
| btv->mbox_data = (1<<9); |
| btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); |
| } |
| } else { |
| btv->has_radio = 0; |
| } |
| if (-1 != msp) { |
| if (btv->c.type == BTTV_BOARD_MIRO) |
| btv->c.type = BTTV_BOARD_MIROPRO; |
| if (btv->c.type == BTTV_BOARD_PINNACLE) |
| btv->c.type = BTTV_BOARD_PINNACLEPRO; |
| } |
| printk(KERN_INFO |
| "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", |
| btv->c.nr, id+1, btv->tuner_type, |
| !btv->has_radio ? "no" : |
| (btv->has_matchbox ? "matchbox" : "fmtuner"), |
| (-1 == msp) ? "no" : "yes"); |
| } else { |
| /* new cards with microtune tuner */ |
| id = 63 - id; |
| btv->has_radio = 0; |
| switch (id) { |
| case 1: |
| info = "PAL / mono"; |
| btv->tda9887_conf = TDA9887_INTERCARRIER; |
| break; |
| case 2: |
| info = "PAL+SECAM / stereo"; |
| btv->has_radio = 1; |
| btv->tda9887_conf = TDA9887_QSS; |
| break; |
| case 3: |
| info = "NTSC / stereo"; |
| btv->has_radio = 1; |
| btv->tda9887_conf = TDA9887_QSS; |
| break; |
| case 4: |
| info = "PAL+SECAM / mono"; |
| btv->tda9887_conf = TDA9887_QSS; |
| break; |
| case 5: |
| info = "NTSC / mono"; |
| btv->tda9887_conf = TDA9887_INTERCARRIER; |
| break; |
| case 6: |
| info = "NTSC / stereo"; |
| btv->tda9887_conf = TDA9887_INTERCARRIER; |
| break; |
| case 7: |
| info = "PAL / stereo"; |
| btv->tda9887_conf = TDA9887_INTERCARRIER; |
| break; |
| default: |
| info = "oops: unknown card"; |
| break; |
| } |
| if (-1 != msp) |
| btv->c.type = BTTV_BOARD_PINNACLEPRO; |
| printk(KERN_INFO |
| "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", |
| btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); |
| btv->tuner_type = TUNER_MT2032; |
| } |
| } |
| |
| /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ |
| #define LM1882_SYNC_DRIVE 0x200000L |
| |
| static void init_ids_eagle(struct bttv *btv) |
| { |
| gpio_inout(0xffffff,0xFFFF37); |
| gpio_write(0x200020); |
| |
| /* flash strobe inverter ?! */ |
| gpio_write(0x200024); |
| |
| /* switch sync drive off */ |
| gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); |
| |
| /* set BT848 muxel to 2 */ |
| btaor((2)<<5, ~(2<<5), BT848_IFORM); |
| } |
| |
| /* Muxsel helper for the IDS Eagle. |
| * the eagles does not use the standard muxsel-bits but |
| * has its own multiplexer */ |
| static void eagle_muxsel(struct bttv *btv, unsigned int input) |
| { |
| btaor((2)<<5, ~(3<<5), BT848_IFORM); |
| gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]); |
| |
| /* composite */ |
| /* set chroma ADC to sleep */ |
| btor(BT848_ADC_C_SLEEP, BT848_ADC); |
| /* set to composite video */ |
| btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); |
| btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); |
| |
| /* switch sync drive off */ |
| gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); |
| } |
| |
| static void gvc1100_muxsel(struct bttv *btv, unsigned int input) |
| { |
| static const int masks[] = {0x30, 0x01, 0x12, 0x23}; |
| gpio_write(masks[input%4]); |
| } |
| |
| /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and |
| alarms output |
| |
| GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
| assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | |
| |
| IN - sensor inputs, INx - sensor inputs and TI XORed together |
| O1,O2,O3 - alarm outputs (relays) |
| |
| OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 |
| |
| */ |
| |
| static void init_lmlbt4x(struct bttv *btv) |
| { |
| printk(KERN_DEBUG "LMLBT4x init\n"); |
| btwrite(0x000000, BT848_GPIO_REG_INP); |
| gpio_inout(0xffffff, 0x0006C0); |
| gpio_write(0x000000); |
| } |
| |
| static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) |
| { |
| unsigned int inmux = input % 8; |
| gpio_inout( 0xf, 0xf ); |
| gpio_bits( 0xf, inmux ); |
| } |
| |
| static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) |
| { |
| unsigned int inmux = input % 4; |
| gpio_inout( 3<<9, 3<<9 ); |
| gpio_bits( 3<<9, inmux<<9 ); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static void bttv_reset_audio(struct bttv *btv) |
| { |
| /* |
| * BT878A has a audio-reset register. |
| * 1. This register is an audio reset function but it is in |
| * function-0 (video capture) address space. |
| * 2. It is enough to do this once per power-up of the card. |
| * 3. There is a typo in the Conexant doc -- it is not at |
| * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). |
| * --//Shrikumar 030609 |
| */ |
| if (btv->id != 878) |
| return; |
| |
| if (bttv_debug) |
| printk("bttv%d: BT878A ARESET\n",btv->c.nr); |
| btwrite((1<<7), 0x058); |
| udelay(10); |
| btwrite( 0, 0x058); |
| } |
| |
| /* initialization part one -- before registering i2c bus */ |
| void __devinit bttv_init_card1(struct bttv *btv) |
| { |
| switch (btv->c.type) { |
| case BTTV_BOARD_HAUPPAUGE: |
| case BTTV_BOARD_HAUPPAUGE878: |
| boot_msp34xx(btv,5); |
| break; |
| case BTTV_BOARD_VOODOOTV_FM: |
| boot_msp34xx(btv,20); |
| break; |
| case BTTV_BOARD_AVERMEDIA98: |
| boot_msp34xx(btv,11); |
| break; |
| case BTTV_BOARD_HAUPPAUGEPVR: |
| pvr_boot(btv); |
| break; |
| case BTTV_BOARD_TWINHAN_DST: |
| case BTTV_BOARD_AVDVBT_771: |
| case BTTV_BOARD_PINNACLESAT: |
| btv->use_i2c_hw = 1; |
| break; |
| case BTTV_BOARD_ADLINK_RTV24: |
| init_RTV24( btv ); |
| break; |
| |
| } |
| if (!bttv_tvcards[btv->c.type].has_dvb) |
| bttv_reset_audio(btv); |
| } |
| |
| /* initialization part two -- after registering i2c bus */ |
| void __devinit bttv_init_card2(struct bttv *btv) |
| { |
| int tda9887; |
| int addr=ADDR_UNSET; |
| |
| btv->tuner_type = -1; |
| |
| if (BTTV_BOARD_UNKNOWN == btv->c.type) { |
| bttv_readee(btv,eeprom_data,0xa0); |
| identify_by_eeprom(btv,eeprom_data); |
| } |
| |
| switch (btv->c.type) { |
| case BTTV_BOARD_MIRO: |
| case BTTV_BOARD_MIROPRO: |
| case BTTV_BOARD_PINNACLE: |
| case BTTV_BOARD_PINNACLEPRO: |
| /* miro/pinnacle */ |
| miro_pinnacle_gpio(btv); |
| break; |
| case BTTV_BOARD_FLYVIDEO_98: |
| case BTTV_BOARD_MAXI: |
| case BTTV_BOARD_LIFE_FLYKIT: |
| case BTTV_BOARD_FLYVIDEO: |
| case BTTV_BOARD_TYPHOON_TVIEW: |
| case BTTV_BOARD_CHRONOS_VS2: |
| case BTTV_BOARD_FLYVIDEO_98FM: |
| case BTTV_BOARD_FLYVIDEO2000: |
| case BTTV_BOARD_FLYVIDEO98EZ: |
| case BTTV_BOARD_CONFERENCETV: |
| case BTTV_BOARD_LIFETEC_9415: |
| flyvideo_gpio(btv); |
| break; |
| case BTTV_BOARD_HAUPPAUGE: |
| case BTTV_BOARD_HAUPPAUGE878: |
| case BTTV_BOARD_HAUPPAUGEPVR: |
| /* pick up some config infos from the eeprom */ |
| bttv_readee(btv,eeprom_data,0xa0); |
| hauppauge_eeprom(btv); |
| break; |
| case BTTV_BOARD_AVERMEDIA98: |
| case BTTV_BOARD_AVPHONE98: |
| bttv_readee(btv,eeprom_data,0xa0); |
| avermedia_eeprom(btv); |
| break; |
| case BTTV_BOARD_PXC200: |
| init_PXC200(btv); |
| break; |
| case BTTV_BOARD_PICOLO_TETRA_CHIP: |
| picolo_tetra_init(btv); |
| break; |
| case BTTV_BOARD_VHX: |
| btv->has_radio = 1; |
| btv->has_matchbox = 1; |
| btv->mbox_we = 0x20; |
| btv->mbox_most = 0; |
| btv->mbox_clk = 0x08; |
| btv->mbox_data = 0x10; |
| btv->mbox_mask = 0x38; |
| break; |
| case BTTV_BOARD_VOBIS_BOOSTAR: |
| case BTTV_BOARD_TERRATV: |
| terratec_active_radio_upgrade(btv); |
| break; |
| case BTTV_BOARD_MAGICTVIEW061: |
| if (btv->cardid == 0x3002144f) { |
| btv->has_radio=1; |
| printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr); |
| } |
| break; |
| case BTTV_BOARD_STB2: |
| if (btv->cardid == 0x3060121a) { |
| /* Fix up entry for 3DFX VoodooTV 100, |
| which is an OEM STB card variant. */ |
| btv->has_radio=0; |
| btv->tuner_type=TUNER_TEMIC_NTSC; |
| } |
| break; |
| case BTTV_BOARD_OSPREY1x0: |
| case BTTV_BOARD_OSPREY1x0_848: |
| case BTTV_BOARD_OSPREY101_848: |
| case BTTV_BOARD_OSPREY1x1: |
| case BTTV_BOARD_OSPREY1x1_SVID: |
| case BTTV_BOARD_OSPREY2xx: |
| case BTTV_BOARD_OSPREY2x0_SVID: |
| case BTTV_BOARD_OSPREY2x0: |
| case BTTV_BOARD_OSPREY500: |
| case BTTV_BOARD_OSPREY540: |
| case BTTV_BOARD_OSPREY2000: |
| bttv_readee(btv,eeprom_data,0xa0); |
| osprey_eeprom(btv); |
| break; |
| case BTTV_BOARD_IDS_EAGLE: |
| init_ids_eagle(btv); |
| break; |
| case BTTV_BOARD_MODTEC_205: |
| bttv_readee(btv,eeprom_data,0xa0); |
| modtec_eeprom(btv); |
| break; |
| case BTTV_BOARD_LMLBT4: |
| init_lmlbt4x(btv); |
| break; |
| case BTTV_BOARD_TIBET_CS16: |
| tibetCS16_init(btv); |
| break; |
| case BTTV_BOARD_KODICOM_4400R: |
| kodicom4400r_init(btv); |
| break; |
| } |
| |
| /* pll configuration */ |
| if (!(btv->id==848 && btv->revision==0x11)) { |
| /* defaults from card list */ |
| if (PLL_28 == bttv_tvcards[btv->c.type].pll) { |
| btv->pll.pll_ifreq=28636363; |
| btv->pll.pll_crystal=BT848_IFORM_XT0; |
| } |
| if (PLL_35 == bttv_tvcards[btv->c.type].pll) { |
| btv->pll.pll_ifreq=35468950; |
| btv->pll.pll_crystal=BT848_IFORM_XT1; |
| } |
| /* insmod options can override */ |
| switch (pll[btv->c.nr]) { |
| case 0: /* none */ |
| btv->pll.pll_crystal = 0; |
| btv->pll.pll_ifreq = 0; |
| btv->pll.pll_ofreq = 0; |
| break; |
| case 1: /* 28 MHz */ |
| case 28: |
| btv->pll.pll_ifreq = 28636363; |
| btv->pll.pll_ofreq = 0; |
| btv->pll.pll_crystal = BT848_IFORM_XT0; |
| break; |
| case 2: /* 35 MHz */ |
| case 35: |
| btv->pll.pll_ifreq = 35468950; |
| btv->pll.pll_ofreq = 0; |
| btv->pll.pll_crystal = BT848_IFORM_XT1; |
| break; |
| } |
| } |
| btv->pll.pll_current = -1; |
| |
| /* tuner configuration (from card list / autodetect / insmod option) */ |
| if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) |
| addr = bttv_tvcards[btv->c.type].tuner_addr; |
| |
| if (UNSET != bttv_tvcards[btv->c.type].tuner_type) |
| if(UNSET == btv->tuner_type) |
| btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; |
| if (UNSET != tuner[btv->c.nr]) |
| btv->tuner_type = tuner[btv->c.nr]; |
| printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type); |
| |
| if (btv->tuner_type != UNSET) { |
| struct tuner_setup tun_setup; |
| |
| tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; |
| tun_setup.type = btv->tuner_type; |
| tun_setup.addr = addr; |
| |
| bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup); |
| } |
| |
| if (btv->tda9887_conf) { |
| bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG, |
| &btv->tda9887_conf); |
| } |
| |
| btv->svhs = bttv_tvcards[btv->c.type].svhs; |
| if (svhs[btv->c.nr] != UNSET) |
| btv->svhs = svhs[btv->c.nr]; |
| if (remote[btv->c.nr] != UNSET) |
| btv->has_remote = remote[btv->c.nr]; |
| |
| if (bttv_tvcards[btv->c.type].has_radio) |
| btv->has_radio=1; |
| if (bttv_tvcards[btv->c.type].has_remote) |
| btv->has_remote=1; |
| if (!bttv_tvcards[btv->c.type].no_gpioirq) |
| btv->gpioirq=1; |
| if (bttv_tvcards[btv->c.type].audio_hook) |
| btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook; |
| |
| if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) { |
| /* detect Bt832 chip for quartzsight digital camera */ |
| if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) || |
| (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0)) |
| boot_bt832(btv); |
| } |
| |
| if (!autoload) |
| return; |
| |
| /* try to detect audio/fader chips */ |
| if (!bttv_tvcards[btv->c.type].no_msp34xx && |
| bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) |
| request_module("msp3400"); |
| |
| if (bttv_tvcards[btv->c.type].msp34xx_alt && |
| bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0) |
| request_module("msp3400"); |
| |
| if (!bttv_tvcards[btv->c.type].no_tda9875 && |
| bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) |
| request_module("tda9875"); |
| |
| if (!bttv_tvcards[btv->c.type].no_tda7432 && |
| bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) |
| request_module("tda7432"); |
| |
| if (bttv_tvcards[btv->c.type].needs_tvaudio) |
| request_module("tvaudio"); |
| |
| /* tuner modules */ |
| tda9887 = 0; |
| if (btv->tda9887_conf) |
| tda9887 = 1; |
| if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb && |
| bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0) |
| tda9887 = 1; |
| /* Hybrid DVB card, DOES have a tda9887 */ |
| if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE) |
| tda9887 = 1; |
| if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) || |
| (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) || |
| (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) || |
| tda9887) |
| request_module("tda9887"); |
| if (btv->tuner_type != UNSET) |
| request_module("tuner"); |
| } |
| |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static void modtec_eeprom(struct bttv *btv) |
| { |
| if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { |
| btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; |
| printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", |
| btv->c.nr,&eeprom_data[0x1e]); |
| } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { |
| btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; |
| printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", |
| btv->c.nr,&eeprom_data[0x1e]); |
| } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { |
| btv->tuner_type=TUNER_PHILIPS_NTSC; |
| printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", |
| btv->c.nr,&eeprom_data[0x1e]); |
| } else { |
| printk("bttv%d: Modtec: Unknown TunerString: %s\n", |
| btv->c.nr,&eeprom_data[0x1e]); |
| } |
| } |
| |
| static void __devinit hauppauge_eeprom(struct bttv *btv) |
| { |
| struct tveeprom tv; |
| |
| tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); |
| btv->tuner_type = tv.tuner_type; |
| btv->has_radio = tv.has_radio; |
| |
| printk("bttv%d: Hauppauge eeprom indicates model#%d\n", |
| btv->c.nr, tv.model); |
| |
| /* |
| * Some of the 878 boards have duplicate PCI IDs. Switch the board |
| * type based on model #. |
| */ |
| if(tv.model == 64900) { |
| printk("bttv%d: Switching board type from %s to %s\n", |
| btv->c.nr, |
| bttv_tvcards[btv->c.type].name, |
| bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); |
| btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; |
| } |
| } |
| |
| static int terratec_active_radio_upgrade(struct bttv *btv) |
| { |
| int freq; |
| |
| btv->has_radio = 1; |
| btv->has_matchbox = 1; |
| btv->mbox_we = 0x10; |
| btv->mbox_most = 0x20; |
| btv->mbox_clk = 0x08; |
| btv->mbox_data = 0x04; |
| btv->mbox_mask = 0x3c; |
| |
| btv->mbox_iow = 1 << 8; |
| btv->mbox_ior = 1 << 9; |
| btv->mbox_csel = 1 << 10; |
| |
| freq=88000/62.5; |
| tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */ |
| if (0x1ed8 == tea5757_read(btv)) { |
| printk("bttv%d: Terratec Active Radio Upgrade found.\n", |
| btv->c.nr); |
| btv->has_radio = 1; |
| btv->has_matchbox = 1; |
| } else { |
| btv->has_radio = 0; |
| btv->has_matchbox = 0; |
| } |
| return 0; |
| } |
| |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| /* |
| * minimal bootstrap for the WinTV/PVR -- upload altera firmware. |
| * |
| * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have |
| * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be |
| * unpacked with unzip). |
| */ |
| #define PVR_GPIO_DELAY 10 |
| |
| #define BTTV_ALT_DATA 0x000001 |
| #define BTTV_ALT_DCLK 0x100000 |
| #define BTTV_ALT_NCONFIG 0x800000 |
| |
| static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen) |
| { |
| u32 n; |
| u8 bits; |
| int i; |
| |
| gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); |
| gpio_write(0); |
| udelay(PVR_GPIO_DELAY); |
| |
| gpio_write(BTTV_ALT_NCONFIG); |
| udelay(PVR_GPIO_DELAY); |
| |
| for (n = 0; n < microlen; n++) { |
| bits = micro[n]; |
| for ( i = 0 ; i < 8 ; i++ ) { |
| gpio_bits(BTTV_ALT_DCLK,0); |
| if (bits & 0x01) |
| gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); |
| else |
| gpio_bits(BTTV_ALT_DATA,0); |
| gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); |
| bits >>= 1; |
| } |
| } |
| gpio_bits(BTTV_ALT_DCLK,0); |
| udelay(PVR_GPIO_DELAY); |
| |
| /* begin Altera init loop (Not necessary,but doesn't hurt) */ |
| for (i = 0 ; i < 30 ; i++) { |
| gpio_bits(BTTV_ALT_DCLK,0); |
| gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); |
| } |
| gpio_bits(BTTV_ALT_DCLK,0); |
| return 0; |
| } |
| |
| static int __devinit pvr_boot(struct bttv *btv) |
| { |
| const struct firmware *fw_entry; |
| int rc; |
| |
| rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); |
| if (rc != 0) { |
| printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n", |
| btv->c.nr); |
| return rc; |
| } |
| rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); |
| printk(KERN_INFO "bttv%d: altera firmware upload %s\n", |
| btv->c.nr, (rc < 0) ? "failed" : "ok"); |
| release_firmware(fw_entry); |
| return rc; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* some osprey specific stuff */ |
| |
| static void __devinit osprey_eeprom(struct bttv *btv) |
| { |
| int i = 0; |
| unsigned char *ee = eeprom_data; |
| unsigned long serial = 0; |
| |
| if (btv->c.type == 0) { |
| /* this might be an antique... check for MMAC label in eeprom */ |
| if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) { |
| unsigned char checksum = 0; |
| for (i =0; i<21; i++) |
| checksum += ee[i]; |
| if (checksum != ee[21]) |
| return; |
| btv->c.type = BTTV_BOARD_OSPREY1x0_848; |
| for (i = 12; i < 21; i++) |
| serial *= 10, serial += ee[i] - '0'; |
| } |
| } else { |
| unsigned short type; |
| int offset = 4*16; |
| |
| for(; offset < 8*16; offset += 16) { |
| unsigned short checksum = 0; |
| /* verify the checksum */ |
| for(i = 0; i<14; i++) checksum += ee[i+offset]; |
| checksum = ~checksum; /* no idea why */ |
| if ((((checksum>>8)&0x0FF) == ee[offset+14]) && |
| ((checksum & 0x0FF) == ee[offset+15])) { |
| break; |
| } |
| } |
| |
| if (offset >= 8*16) |
| return; |
| |
| /* found a valid descriptor */ |
| type = (ee[offset+4]<<8) | (ee[offset+5]); |
| |
| switch(type) { |
| |
| /* 848 based */ |
| case 0x0004: |
| btv->c.type = BTTV_BOARD_OSPREY1x0_848; |
| break; |
| case 0x0005: |
| btv->c.type = BTTV_BOARD_OSPREY101_848; |
| break; |
| |
| /* 878 based */ |
| case 0x0012: |
| case 0x0013: |
| btv->c.type = BTTV_BOARD_OSPREY1x0; |
| break; |
| case 0x0014: |
| case 0x0015: |
| btv->c.type = BTTV_BOARD_OSPREY1x1; |
| break; |
| case 0x0016: |
| case 0x0017: |
| case 0x0020: |
| btv->c.type = BTTV_BOARD_OSPREY1x1_SVID; |
| break; |
| case 0x0018: |
| case 0x0019: |
| case 0x001E: |
| case 0x001F: |
| btv->c.type = BTTV_BOARD_OSPREY2xx; |
| break; |
| case 0x001A: |
| case 0x001B: |
| btv->c.type = BTTV_BOARD_OSPREY2x0_SVID; |
| break; |
| case 0x0040: |
| btv->c.type = BTTV_BOARD_OSPREY500; |
| break; |
| case 0x0050: |
| case 0x0056: |
| btv->c.type = BTTV_BOARD_OSPREY540; |
| /* bttv_osprey_540_init(btv); */ |
| break; |
| case 0x0060: |
| case 0x0070: |
| btv->c.type = BTTV_BOARD_OSPREY2x0; |
| /* enable output on select control lines */ |
| gpio_inout(0xffffff,0x000303); |
| break; |
| default: |
| /* unknown...leave generic, but get serial # */ |
| break; |
| } |
| serial = (ee[offset+6] << 24) |
| | (ee[offset+7] << 16) |
| | (ee[offset+8] << 8) |
| | (ee[offset+9]); |
| } |
| |
| printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n", |
| btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* AVermedia specific stuff, from bktr_card.c */ |
| |
| static int tuner_0_table[] = { |
| TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, |
| TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, |
| TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, |
| TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, |
| TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, |
| TUNER_PHILIPS_FM1216ME_MK3 }; |
| |
| static int tuner_1_table[] = { |
| TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, |
| TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, |
| TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, |
| TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ |
| TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; |
| |
| static void __devinit avermedia_eeprom(struct bttv *btv) |
| { |
| int tuner_make,tuner_tv_fm,tuner_format,tuner=0; |
| |
| tuner_make = (eeprom_data[0x41] & 0x7); |
| tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; |
| tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; |
| btv->has_remote = (eeprom_data[0x42] & 0x01); |
| |
| if (tuner_make == 0 || tuner_make == 2) |
| if(tuner_format <=0x0a) |
| tuner = tuner_0_table[tuner_format]; |
| if (tuner_make == 1) |
| if(tuner_format <=9) |
| tuner = tuner_1_table[tuner_format]; |
| |
| if (tuner_make == 4) |
| if(tuner_format == 0x09) |
| tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ |
| |
| printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=", |
| btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]); |
| if(tuner) { |
| btv->tuner_type=tuner; |
| printk("%d",tuner); |
| } else |
| printk("Unknown type"); |
| printk(" radio:%s remote control:%s\n", |
| tuner_tv_fm ? "yes" : "no", |
| btv->has_remote ? "yes" : "no"); |
| } |
| |
| /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */ |
| void bttv_tda9880_setnorm(struct bttv *btv, int norm) |
| { |
| /* fix up our card entry */ |
| if(norm==VIDEO_MODE_NTSC) { |
| bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff; |
| bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff; |
| dprintk("bttv_tda9880_setnorm to NTSC\n"); |
| } |
| else { |
| bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff; |
| bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff; |
| dprintk("bttv_tda9880_setnorm to PAL\n"); |
| } |
| /* set GPIO according */ |
| gpio_bits(bttv_tvcards[btv->c.type].gpiomask, |
| bttv_tvcards[btv->c.type].audiomux[btv->audio]); |
| } |
| |
| |
| /* |
| * reset/enable the MSP on some Hauppauge cards |
| * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! |
| * |
| * Hauppauge: pin 5 |
| * Voodoo: pin 20 |
| */ |
| static void __devinit boot_msp34xx(struct bttv *btv, int pin) |
| { |
| int mask = (1 << pin); |
| |
| gpio_inout(mask,mask); |
| gpio_bits(mask,0); |
| udelay(2500); |
| gpio_bits(mask,mask); |
| |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"msp34xx"); |
| if (bttv_verbose) |
| printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line " |
| "init [%d]\n", btv->c.nr, pin); |
| } |
| |
| static void __devinit boot_bt832(struct bttv *btv) |
| { |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* Imagenation L-Model PXC200 Framegrabber */ |
| /* This is basically the same procedure as |
| * used by Alessandro Rubini in his pxc200 |
| * driver, but using BTTV functions */ |
| |
| static void __devinit init_PXC200(struct bttv *btv) |
| { |
| static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, |
| 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, |
| 0x00 }; |
| unsigned int i; |
| int tmp; |
| u32 val; |
| |
| /* Initialise GPIO-connevted stuff */ |
| gpio_inout(0xffffff, (1<<13)); |
| gpio_write(0); |
| udelay(3); |
| gpio_write(1<<13); |
| /* GPIO inputs are pulled up, so no need to drive |
| * reset pin any longer */ |
| gpio_bits(0xffffff, 0); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"pxc200"); |
| |
| /* we could/should try and reset/control the AD pots? but |
| right now we simply turned off the crushing. Without |
| this the AGC drifts drifts |
| remember the EN is reverse logic --> |
| setting BT848_ADC_AGC_EN disable the AGC |
| tboult@eecs.lehigh.edu |
| */ |
| |
| btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); |
| |
| /* Initialise MAX517 DAC */ |
| printk(KERN_INFO "Setting DAC reference voltage level ...\n"); |
| bttv_I2CWrite(btv,0x5E,0,0x80,1); |
| |
| /* Initialise 12C508 PIC */ |
| /* The I2CWrite and I2CRead commmands are actually to the |
| * same chips - but the R/W bit is included in the address |
| * argument so the numbers are different */ |
| |
| |
| printk(KERN_INFO "Initialising 12C508 PIC chip ...\n"); |
| |
| /* First of all, enable the clock line. This is used in the PXC200-F */ |
| val = btread(BT848_GPIO_DMA_CTL); |
| val |= BT848_GPIO_DMA_CTL_GPCLKMODE; |
| btwrite(val, BT848_GPIO_DMA_CTL); |
| |
| /* Then, push to 0 the reset pin long enough to reset the * |
| * device same as above for the reset line, but not the same |
| * value sent to the GPIO-connected stuff |
| * which one is the good one? */ |
| gpio_inout(0xffffff,(1<<2)); |
| gpio_write(0); |
| udelay(10); |
| gpio_write(1<<2); |
| |
| for (i = 0; i < ARRAY_SIZE(vals); i++) { |
| tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); |
| if (tmp != -1) { |
| printk(KERN_INFO |
| "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", |
| vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); |
| } |
| } |
| |
| printk(KERN_INFO "PXC200 Initialised.\n"); |
| } |
| |
| |
| |
| /* ----------------------------------------------------------------------- */ |
| /* |
| * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock |
| * it. This apparently involves the following procedure for each 878 chip: |
| * |
| * 1) write 0x00C3FEFF to the GPIO_OUT_EN register |
| * |
| * 2) write to GPIO_DATA |
| * - 0x0E |
| * - sleep 1ms |
| * - 0x10 + 0x0E |
| * - sleep 10ms |
| * - 0x0E |
| * read from GPIO_DATA into buf (uint_32) |
| * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) |
| * error. ERROR_CPLD_Check_Failed stop. |
| * |
| * 3) write to GPIO_DATA |
| * - write 0x4400 + 0x0E |
| * - sleep 10ms |
| * - write 0x4410 + 0x0E |
| * - sleep 1ms |
| * - write 0x0E |
| * read from GPIO_DATA into buf (uint_32) |
| * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 ) |
| * error. ERROR_CPLD_Check_Failed. |
| */ |
| /* ----------------------------------------------------------------------- */ |
| static void |
| init_RTV24 (struct bttv *btv) |
| { |
| uint32_t dataRead = 0; |
| long watchdog_value = 0x0E; |
| |
| printk (KERN_INFO |
| "bttv%d: Adlink RTV-24 initialisation in progress ...\n", |
| btv->c.nr); |
| |
| btwrite (0x00c3feff, BT848_GPIO_OUT_EN); |
| |
| btwrite (0 + watchdog_value, BT848_GPIO_DATA); |
| msleep (1); |
| btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); |
| msleep (10); |
| btwrite (0 + watchdog_value, BT848_GPIO_DATA); |
| |
| dataRead = btread (BT848_GPIO_DATA); |
| |
| if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { |
| printk (KERN_INFO |
| "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", |
| btv->c.nr, dataRead); |
| } |
| |
| btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); |
| msleep (10); |
| btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); |
| msleep (1); |
| btwrite (watchdog_value, BT848_GPIO_DATA); |
| msleep (1); |
| dataRead = btread (BT848_GPIO_DATA); |
| |
| if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { |
| printk (KERN_INFO |
| "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", |
| btv->c.nr, dataRead); |
| |
| return; |
| } |
| |
| printk (KERN_INFO |
| "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr); |
| } |
| |
| |
| |
| /* ----------------------------------------------------------------------- */ |
| /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ |
| /* |
| * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu> |
| * This code is placed under the terms of the GNU General Public License |
| * |
| * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00 |
| */ |
| |
| static void bus_low(struct bttv *btv, int bit) |
| { |
| if (btv->mbox_ior) { |
| gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, |
| btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); |
| udelay(5); |
| } |
| |
| gpio_bits(bit,0); |
| udelay(5); |
| |
| if (btv->mbox_ior) { |
| gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); |
| udelay(5); |
| } |
| } |
| |
| static void bus_high(struct bttv *btv, int bit) |
| { |
| if (btv->mbox_ior) { |
| gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, |
| btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); |
| udelay(5); |
| } |
| |
| gpio_bits(bit,bit); |
| udelay(5); |
| |
| if (btv->mbox_ior) { |
| gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); |
| udelay(5); |
| } |
| } |
| |
| static int bus_in(struct bttv *btv, int bit) |
| { |
| if (btv->mbox_ior) { |
| gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, |
| btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); |
| udelay(5); |
| |
| gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); |
| udelay(5); |
| } |
| return gpio_read() & (bit); |
| } |
| |
| /* TEA5757 register bits */ |
| #define TEA_FREQ 0:14 |
| #define TEA_BUFFER 15:15 |
| |
| #define TEA_SIGNAL_STRENGTH 16:17 |
| |
| #define TEA_PORT1 18:18 |
| #define TEA_PORT0 19:19 |
| |
| #define TEA_BAND 20:21 |
| #define TEA_BAND_FM 0 |
| #define TEA_BAND_MW 1 |
| #define TEA_BAND_LW 2 |
| #define TEA_BAND_SW 3 |
| |
| #define TEA_MONO 22:22 |
| #define TEA_ALLOW_STEREO 0 |
| #define TEA_FORCE_MONO 1 |
| |
| #define TEA_SEARCH_DIRECTION 23:23 |
| #define TEA_SEARCH_DOWN 0 |
| #define TEA_SEARCH_UP 1 |
| |
| #define TEA_STATUS 24:24 |
| #define TEA_STATUS_TUNED 0 |
| #define TEA_STATUS_SEARCHING 1 |
| |
| /* Low-level stuff */ |
| static int tea5757_read(struct bttv *btv) |
| { |
| unsigned long timeout; |
| int value = 0; |
| int i; |
| |
| /* better safe than sorry */ |
| gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we); |
| |
| if (btv->mbox_ior) { |
| gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, |
| btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); |
| udelay(5); |
| } |
| |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"tea5757 read"); |
| |
| bus_low(btv,btv->mbox_we); |
| bus_low(btv,btv->mbox_clk); |
| |
| udelay(10); |
| timeout= jiffies + HZ; |
| |
| /* wait for DATA line to go low; error if it doesn't */ |
| while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout)) |
| schedule(); |
| if (bus_in(btv,btv->mbox_data)) { |
| printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr); |
| return -1; |
| } |
| |
| dprintk("bttv%d: tea5757:",btv->c.nr); |
| for(i = 0; i < 24; i++) |
| { |
| udelay(5); |
| bus_high(btv,btv->mbox_clk); |
| udelay(5); |
| dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-'); |
| bus_low(btv,btv->mbox_clk); |
| value <<= 1; |
| value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */ |
| dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M'); |
| } |
| dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value); |
| return value; |
| } |
| |
| static int tea5757_write(struct bttv *btv, int value) |
| { |
| int i; |
| int reg = value; |
| |
| gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data); |
| |
| if (btv->mbox_ior) { |
| gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, |
| btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); |
| udelay(5); |
| } |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"tea5757 write"); |
| |
| dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value); |
| bus_low(btv,btv->mbox_clk); |
| bus_high(btv,btv->mbox_we); |
| for(i = 0; i < 25; i++) |
| { |
| if (reg & 0x1000000) |
| bus_high(btv,btv->mbox_data); |
| else |
| bus_low(btv,btv->mbox_data); |
| reg <<= 1; |
| bus_high(btv,btv->mbox_clk); |
| udelay(10); |
| bus_low(btv,btv->mbox_clk); |
| udelay(10); |
| } |
| bus_low(btv,btv->mbox_we); /* unmute !!! */ |
| return 0; |
| } |
| |
| void tea5757_set_freq(struct bttv *btv, unsigned short freq) |
| { |
| dprintk("tea5757_set_freq %d\n",freq); |
| tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ |
| } |
| |
| |
| /* ----------------------------------------------------------------------- */ |
| /* winview */ |
| |
| static void winview_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */ |
| int bits_out, loops, vol, data; |
| |
| if (!set) { |
| /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */ |
| v->flags |= VIDEO_AUDIO_VOLUME; |
| return; |
| } |
| |
| /* 32 levels logarithmic */ |
| vol = 32 - ((v->volume>>11)); |
| /* units */ |
| bits_out = (PT2254_DBS_IN_2>>(vol%5)); |
| /* tens */ |
| bits_out |= (PT2254_DBS_IN_10>>(vol/5)); |
| bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL; |
| data = gpio_read(); |
| data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA| |
| WINVIEW_PT2254_STROBE); |
| for (loops = 17; loops >= 0 ; loops--) { |
| if (bits_out & (1<<loops)) |
| data |= WINVIEW_PT2254_DATA; |
| else |
| data &= ~WINVIEW_PT2254_DATA; |
| gpio_write(data); |
| udelay(5); |
| data |= WINVIEW_PT2254_CLK; |
| gpio_write(data); |
| udelay(5); |
| data &= ~WINVIEW_PT2254_CLK; |
| gpio_write(data); |
| } |
| data |= WINVIEW_PT2254_STROBE; |
| data &= ~WINVIEW_PT2254_DATA; |
| gpio_write(data); |
| udelay(10); |
| data &= ~WINVIEW_PT2254_STROBE; |
| gpio_write(data); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* mono/stereo control for various cards (which don't use i2c chips but */ |
| /* connect something to the GPIO pins */ |
| |
| static void |
| gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned int con = 0; |
| |
| if (set) { |
| gpio_inout(0x300, 0x300); |
| if (v->mode & VIDEO_SOUND_LANG1) |
| con = 0x000; |
| if (v->mode & VIDEO_SOUND_LANG2) |
| con = 0x300; |
| if (v->mode & VIDEO_SOUND_STEREO) |
| con = 0x200; |
| /* if (v->mode & VIDEO_SOUND_MONO) |
| * con = 0x100; */ |
| gpio_bits(0x300, con); |
| } else { |
| v->mode = VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| |
| static void |
| gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned int val, con; |
| |
| if (btv->radio_user) |
| return; |
| |
| val = gpio_read(); |
| if (set) { |
| con = 0x000; |
| if (v->mode & VIDEO_SOUND_LANG2) { |
| if (v->mode & VIDEO_SOUND_LANG1) { |
| /* LANG1 + LANG2 */ |
| con = 0x100; |
| } |
| else { |
| /* LANG2 */ |
| con = 0x300; |
| } |
| } |
| if (con != (val & 0x300)) { |
| gpio_bits(0x300, con); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"gvbctv5pci"); |
| } |
| } else { |
| switch (val & 0x70) { |
| case 0x10: |
| v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| break; |
| case 0x30: |
| v->mode = VIDEO_SOUND_LANG2; |
| break; |
| case 0x50: |
| v->mode = VIDEO_SOUND_LANG1; |
| break; |
| case 0x60: |
| v->mode = VIDEO_SOUND_STEREO; |
| break; |
| case 0x70: |
| v->mode = VIDEO_SOUND_MONO; |
| break; |
| default: |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| } |
| |
| /* |
| * Mario Medina Nussbaum <medisoft@alohabbs.org.mx> |
| * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo, |
| * 0xdde enables mono and 0xccd enables sap |
| * |
| * Petr Vandrovec <VANDROVE@vc.cvut.cz> |
| * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select |
| * input/output sound connection, so both must be set for output mode. |
| * |
| * Looks like it's needed only for the "tvphone", the "tvphone 98" |
| * handles this with a tda9840 |
| * |
| */ |
| static void |
| avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| int val = 0; |
| |
| if (set) { |
| if (v->mode & VIDEO_SOUND_LANG2) /* SAP */ |
| val = 0x02; |
| if (v->mode & VIDEO_SOUND_STEREO) |
| val = 0x01; |
| if (val) { |
| gpio_bits(0x03,val); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"avermedia"); |
| } |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1; |
| return; |
| } |
| } |
| |
| static void |
| avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| int val = 0; |
| |
| if (set) { |
| if (v->mode & VIDEO_SOUND_LANG2) /* SAP */ |
| val = 0x01; |
| if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */ |
| val = 0x02; |
| btaor(val, ~0x03, BT848_GPIO_DATA); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"avermedia"); |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| return; |
| } |
| } |
| |
| /* Lifetec 9415 handling */ |
| static void |
| lt9415_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| int val = 0; |
| |
| if (gpio_read() & 0x4000) { |
| v->mode = VIDEO_SOUND_MONO; |
| return; |
| } |
| |
| if (set) { |
| if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */ |
| val = 0x0080; |
| if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */ |
| val = 0x0880; |
| if ((v->mode & VIDEO_SOUND_LANG1) || |
| (v->mode & VIDEO_SOUND_MONO)) |
| val = 0; |
| gpio_bits(0x0880, val); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"lt9415"); |
| } else { |
| /* autodetect doesn't work with this card :-( */ |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| return; |
| } |
| } |
| |
| /* TDA9821 on TerraTV+ Bt848, Bt878 */ |
| static void |
| terratv_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned int con = 0; |
| |
| if (set) { |
| gpio_inout(0x180000,0x180000); |
| if (v->mode & VIDEO_SOUND_LANG2) |
| con = 0x080000; |
| if (v->mode & VIDEO_SOUND_STEREO) |
| con = 0x180000; |
| gpio_bits(0x180000, con); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"terratv"); |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| |
| static void |
| winfast2000_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned long val = 0; |
| |
| if (set) { |
| /*btor (0xc32000, BT848_GPIO_OUT_EN);*/ |
| if (v->mode & VIDEO_SOUND_MONO) /* Mono */ |
| val = 0x420000; |
| if (v->mode & VIDEO_SOUND_LANG1) /* Mono */ |
| val = 0x420000; |
| if (v->mode & VIDEO_SOUND_LANG2) /* SAP */ |
| val = 0x410000; |
| if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */ |
| val = 0x020000; |
| if (val) { |
| gpio_bits(0x430000, val); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"winfast2000"); |
| } |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| |
| /* |
| * Dariusz Kowalewski <darekk@automex.pl> |
| * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM |
| * revision 9B has on-board TDA9874A sound decoder). |
| * |
| * Note: There are card variants without tda9874a. Forcing the "stereo sound route" |
| * will mute this cards. |
| */ |
| static void |
| pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned int val = 0; |
| |
| if (btv->radio_user) |
| return; |
| |
| if (set) { |
| if (v->mode & VIDEO_SOUND_MONO) { |
| val = 0x01; |
| } |
| if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2)) |
| || (v->mode & VIDEO_SOUND_STEREO)) { |
| val = 0x02; |
| } |
| if (val) { |
| gpio_bits(0x03,val); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"pvbt878p9b"); |
| } |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| |
| /* |
| * Dariusz Kowalewski <darekk@automex.pl> |
| * sound control for FlyVideo 2000S (with tda9874 decoder) |
| * based on pvbt878p9b_audio() - this is not tested, please fix!!! |
| */ |
| static void |
| fv2000s_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned int val = 0xffff; |
| |
| if (btv->radio_user) |
| return; |
| if (set) { |
| if (v->mode & VIDEO_SOUND_MONO) { |
| val = 0x0000; |
| } |
| if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2)) |
| || (v->mode & VIDEO_SOUND_STEREO)) { |
| val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */ |
| } |
| if (val != 0xffff) { |
| gpio_bits(0x1800, val); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"fv2000s"); |
| } |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| |
| /* |
| * sound control for Canopus WinDVR PCI |
| * Masaki Suzuki <masaki@btree.org> |
| */ |
| static void |
| windvr_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned long val = 0; |
| |
| if (set) { |
| if (v->mode & VIDEO_SOUND_MONO) |
| val = 0x040000; |
| if (v->mode & VIDEO_SOUND_LANG1) |
| val = 0; |
| if (v->mode & VIDEO_SOUND_LANG2) |
| val = 0x100000; |
| if (v->mode & VIDEO_SOUND_STEREO) |
| val = 0; |
| if (val) { |
| gpio_bits(0x140000, val); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"windvr"); |
| } |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| |
| /* |
| * sound control for AD-TVK503 |
| * Hiroshi Takekawa <sian@big.or.jp> |
| */ |
| static void |
| adtvk503_audio(struct bttv *btv, struct video_audio *v, int set) |
| { |
| unsigned int con = 0xffffff; |
| |
| /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */ |
| |
| if (set) { |
| /* btor(***, BT848_GPIO_OUT_EN); */ |
| if (v->mode & VIDEO_SOUND_LANG1) |
| con = 0x00000000; |
| if (v->mode & VIDEO_SOUND_LANG2) |
| con = 0x00180000; |
| if (v->mode & VIDEO_SOUND_STEREO) |
| con = 0x00000000; |
| if (v->mode & VIDEO_SOUND_MONO) |
| con = 0x00060000; |
| if (con != 0xffffff) { |
| gpio_bits(0x1e0000,con); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv, "adtvk503"); |
| } |
| } else { |
| v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | |
| VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; |
| } |
| } |
| |
| /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] |
| * |
| * This is needed because rv605 don't use a normal multiplex, but a crosspoint |
| * switch instead (CD22M3494E). This IC can have multiple active connections |
| * between Xn (input) and Yn (output) pins. We need to clear any existing |
| * connection prior to establish a new one, pulsing the STROBE pin. |
| * |
| * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. |
| * GPIO pins are wired as: |
| * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler) |
| * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler) |
| * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler) |
| * GPIO[8] - - P3[5] (microcontroler) |
| * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler) |
| * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler) |
| * GPINTR - - P3[4] (microcontroler) |
| * |
| * The microcontroler is a 80C32 like. It should be possible to change xpoint |
| * configuration either directly (as we are doing) or using the microcontroler |
| * which is also wired to I2C interface. I have no further info on the |
| * microcontroler features, one would need to disassembly the firmware. |
| * note: the vendor refused to give any information on this product, all |
| * that stuff was found using a multimeter! :) |
| */ |
| static void rv605_muxsel(struct bttv *btv, unsigned int input) |
| { |
| /* reset all conections */ |
| gpio_bits(0x200,0x200); |
| mdelay(1); |
| gpio_bits(0x200,0x000); |
| mdelay(1); |
| |
| /* create a new conection */ |
| gpio_bits(0x480,0x080); |
| gpio_bits(0x480,0x480); |
| mdelay(1); |
| gpio_bits(0x480,0x080); |
| mdelay(1); |
| } |
| |
| /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] |
| * |
| * The CS16 (available on eBay cheap) is a PCI board with four Fusion |
| * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator |
| * chips, ten eight input analog multiplexors, a not chip and a few |
| * other components. |
| * |
| * 16 inputs on a secondary bracket are provided and can be selected |
| * from each of the four capture chips. Two of the eight input |
| * multiplexors are used to select from any of the 16 input signals. |
| * |
| * Unsupported hardware capabilities: |
| * . A video output monitor on the secondary bracket can be selected from |
| * one of the 878A chips. |
| * . Another passthrough but I haven't spent any time investigating it. |
| * . Digital I/O (logic level connected to GPIO) is available from an |
| * onboard header. |
| * |
| * The on chip input mux should always be set to 2. |
| * GPIO[16:19] - Video input selection |
| * GPIO[0:3] - Video output monitor select (only available from one 878A) |
| * GPIO[?:?] - Digital I/O. |
| * |
| * There is an ATMEL microcontroller with an 8031 core on board. I have not |
| * determined what function (if any) it provides. With the microcontroller |
| * and sync seperator chips a guess is that it might have to do with video |
| * switching and maybe some digital I/O. |
| */ |
| static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) |
| { |
| /* video mux */ |
| gpio_bits(0x0f0000, input << 16); |
| } |
| |
| static void tibetCS16_init(struct bttv *btv) |
| { |
| /* enable gpio bits, mask obtained via btSpy */ |
| gpio_inout(0xffffff, 0x0f7fff); |
| gpio_write(0x0f7fff); |
| } |
| |
| /* |
| * The following routines for the Kodicom-4400r get a little mind-twisting. |
| * There is a "master" controller and three "slave" controllers, together |
| * an analog switch which connects any of 16 cameras to any of the BT87A's. |
| * The analog switch is controlled by the "master", but the detection order |
| * of the four BT878A chips is in an order which I just don't understand. |
| * The "master" is actually the second controller to be detected. The |
| * logic on the board uses logical numbers for the 4 controlers, but |
| * those numbers are different from the detection sequence. When working |
| * with the analog switch, we need to "map" from the detection sequence |
| * over to the board's logical controller number. This mapping sequence |
| * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical |
| * unit 3, the second (which is the master) is logical unit 0, etc. |
| * We need to maintain the status of the analog switch (which of the 16 |
| * cameras is connected to which of the 4 controllers). Rather than |
| * add to the bttv structure for this, we use the data reserved for |
| * the mbox (unused for this card type). |
| */ |
| |
| /* |
| * First a routine to set the analog switch, which controls which camera |
| * is routed to which controller. The switch comprises an X-address |
| * (gpio bits 0-3, representing the camera, ranging from 0-15), and a |
| * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). |
| * A data value (gpio bit 7) of '1' enables the switch, and '0' disables |
| * the switch. A STROBE bit (gpio bit 8) latches the data value into the |
| * specified address. The idea is to set the address and data, then bring |
| * STROBE high, and finally bring STROBE back to low. |
| */ |
| static void kodicom4400r_write(struct bttv *btv, |
| unsigned char xaddr, |
| unsigned char yaddr, |
| unsigned char data) { |
| unsigned int udata; |
| |
| udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); |
| gpio_bits(0x1ff, udata); /* write ADDR and DAT */ |
| gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ |
| gpio_bits(0x1ff, udata); /* strobe low */ |
| } |
| |
| /* |
| * Next the mux select. Both the "master" and "slave" 'cards' (controllers) |
| * use this routine. The routine finds the "master" for the card, maps |
| * the controller number from the detected position over to the logical |
| * number, writes the appropriate data to the analog switch, and housekeeps |
| * the local copy of the switch information. The parameter 'input' is the |
| * requested camera number (0 - 15). |
| */ |
| static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) |
| { |
| char *sw_status; |
| int xaddr, yaddr; |
| struct bttv *mctlr; |
| static unsigned char map[4] = {3, 0, 2, 1}; |
| |
| mctlr = master[btv->c.nr]; |
| if (mctlr == NULL) { /* ignore if master not yet detected */ |
| return; |
| } |
| yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ |
| yaddr = map[yaddr]; |
| sw_status = (char *)(&mctlr->mbox_we); |
| xaddr = input & 0xf; |
| /* Check if the controller/camera pair has changed, else ignore */ |
| if (sw_status[yaddr] != xaddr) |
| { |
| /* "open" the old switch, "close" the new one, save the new */ |
| kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0); |
| sw_status[yaddr] = xaddr; |
| kodicom4400r_write(mctlr, xaddr, yaddr, 1); |
| } |
| } |
| |
| /* |
| * During initialisation, we need to reset the analog switch. We |
| * also preset the switch to map the 4 connectors on the card to the |
| * *user's* (see above description of kodicom4400r_muxsel) channels |
| * 0 through 3 |
| */ |
| static void kodicom4400r_init(struct bttv *btv) |
| { |
| char *sw_status = (char *)(&btv->mbox_we); |
| int ix; |
| |
| gpio_inout(0x0003ff, 0x0003ff); |
| gpio_write(1 << 9); /* reset MUX */ |
| gpio_write(0); |
| /* Preset camera 0 to the 4 controllers */ |
| for (ix=0; ix<4; ix++) { |
| sw_status[ix] = ix; |
| kodicom4400r_write(btv, ix, ix, 1); |
| } |
| /* |
| * Since this is the "master", we need to set up the |
| * other three controller chips' pointers to this structure |
| * for later use in the muxsel routine. |
| */ |
| if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) |
| return; |
| master[btv->c.nr-1] = btv; |
| master[btv->c.nr] = btv; |
| master[btv->c.nr+1] = btv; |
| master[btv->c.nr+2] = btv; |
| } |
| |
| /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel |
| * video multiplexers to provide up to 16 video inputs. These |
| * multiplexers are controlled by the lower 8 GPIO pins of the |
| * bt878. The multiplexers probably Pericom PI5V331Q or similar. |
| |
| * xxx0 is pin xxx of multiplexer U5, |
| * yyy1 is pin yyy of multiplexer U2 |
| */ |
| #define ENA0 0x01 |
| #define ENB0 0x02 |
| #define ENA1 0x04 |
| #define ENB1 0x08 |
| |
| #define IN10 0x10 |
| #define IN00 0x20 |
| #define IN11 0x40 |
| #define IN01 0x80 |
| |
| static void xguard_muxsel(struct bttv *btv, unsigned int input) |
| { |
| static const int masks[] = { |
| ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, |
| ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, |
| ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, |
| ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, |
| }; |
| gpio_write(masks[input%16]); |
| } |
| static void picolo_tetra_init(struct bttv *btv) |
| { |
| /*This is the video input redirection fonctionality : I DID NOT USED IT. */ |
| btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ |
| btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ |
| } |
| static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) |
| { |
| |
| dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input); |
| /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ |
| /*GPIO[20]&GPIO[21] used to choose the right input*/ |
| btwrite (input<<20,BT848_GPIO_DATA); |
| |
| } |
| |
| /* |
| * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] |
| * |
| * The IVC120G security card has 4 i2c controlled TDA8540 matrix |
| * swichers to provide 16 channels to MUX0. The TDA8540's have |
| * 4 indepedant outputs and as such the IVC120G also has the |
| * optional "Monitor Out" bus. This allows the card to be looking |
| * at one input while the monitor is looking at another. |
| * |
| * Since I've couldn't be bothered figuring out how to add an |
| * independant muxsel for the monitor bus, I've just set it to |
| * whatever the card is looking at. |
| * |
| * OUT0 of the TDA8540's is connected to MUX0 (0x03) |
| * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) |
| * |
| * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) |
| * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) |
| * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) |
| * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) |
| * |
| */ |
| |
| /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ |
| #define I2C_TDA8540 0x90 |
| #define I2C_TDA8540_ALT1 0x92 |
| #define I2C_TDA8540_ALT2 0x94 |
| #define I2C_TDA8540_ALT3 0x96 |
| #define I2C_TDA8540_ALT4 0x98 |
| #define I2C_TDA8540_ALT5 0x9a |
| #define I2C_TDA8540_ALT6 0x9c |
| |
| static void ivc120_muxsel(struct bttv *btv, unsigned int input) |
| { |
| /* Simple maths */ |
| int key = input % 4; |
| int matrix = input / 4; |
| |
| dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", |
| btv->c.nr, input, matrix, key); |
| |
| /* Handles the input selection on the TDA8540's */ |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, |
| ((matrix == 3) ? (key | key << 2) : 0x00), 1); |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, |
| ((matrix == 0) ? (key | key << 2) : 0x00), 1); |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, |
| ((matrix == 1) ? (key | key << 2) : 0x00), 1); |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, |
| ((matrix == 2) ? (key | key << 2) : 0x00), 1); |
| |
| /* Handles the output enables on the TDA8540's */ |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, |
| ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, |
| ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, |
| ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ |
| bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, |
| ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ |
| |
| /* Selects MUX0 for input on the 878 */ |
| btaor((0)<<5, ~(3<<5), BT848_IFORM); |
| } |
| |
| |
| /* PXC200 muxsel helper |
| * luke@syseng.anu.edu.au |
| * another transplant |
| * from Alessandro Rubini (rubini@linux.it) |
| * |
| * There are 4 kinds of cards: |
| * PXC200L which is bt848 |
| * PXC200F which is bt848 with PIC controlling mux |
| * PXC200AL which is bt878 |
| * PXC200AF which is bt878 with PIC controlling mux |
| */ |
| #define PX_CFG_PXC200F 0x01 |
| #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ |
| #define PX_I2C_PIC 0x0f |
| #define PX_PXC200A_CARDID 0x200a1295 |
| #define PX_I2C_CMD_CFG 0x00 |
| |
| static void PXC200_muxsel(struct bttv *btv, unsigned int input) |
| { |
| int rc; |
| long mux; |
| int bitmask; |
| unsigned char buf[2]; |
| |
| /* Read PIC config to determine if this is a PXC200F */ |
| /* PX_I2C_CMD_CFG*/ |
| buf[0]=0; |
| buf[1]=0; |
| rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); |
| if (rc) { |
| printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc); |
| /* not PXC ? do nothing */ |
| return; |
| } |
| |
| rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); |
| if (!(rc & PX_CFG_PXC200F)) { |
| printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc); |
| return; |
| } |
| |
| |
| /* The multiplexer in the 200F is handled by the GPIO port */ |
| /* get correct mapping between inputs */ |
| /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ |
| /* ** not needed!? */ |
| mux = input; |
| |
| /* make sure output pins are enabled */ |
| /* bitmask=0x30f; */ |
| bitmask=0x302; |
| /* check whether we have a PXC200A */ |
| if (btv->cardid == PX_PXC200A_CARDID) { |
| bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ |
| bitmask |= 7<<4; /* the DAC */ |
| } |
| btwrite(bitmask, BT848_GPIO_OUT_EN); |
| |
| bitmask = btread(BT848_GPIO_DATA); |
| if (btv->cardid == PX_PXC200A_CARDID) |
| bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); |
| else /* older device */ |
| bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); |
| btwrite(bitmask,BT848_GPIO_DATA); |
| |
| /* |
| * Was "to be safe, set the bt848 to input 0" |
| * Actually, since it's ok at load time, better not messing |
| * with these bits (on PXC200AF you need to set mux 2 here) |
| * |
| * needed because bttv-driver sets mux before calling this function |
| */ |
| if (btv->cardid == PX_PXC200A_CARDID) |
| btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); |
| else /* older device */ |
| btand(~BT848_IFORM_MUXSEL,BT848_IFORM); |
| |
| printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* motherboard chipset specific stuff */ |
| |
| void __devinit bttv_check_chipset(void) |
| { |
| int pcipci_fail = 0; |
| struct pci_dev *dev = NULL; |
| |
| if (pci_pci_problems & PCIPCI_FAIL) |
| pcipci_fail = 1; |
| if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) |
| triton1 = 1; |
| if (pci_pci_problems & PCIPCI_VSFX) |
| vsfx = 1; |
| #ifdef PCIPCI_ALIMAGIK |
| if (pci_pci_problems & PCIPCI_ALIMAGIK) |
| latency = 0x0A; |
| #endif |
| |
| |
| /* print warnings about any quirks found */ |
| if (triton1) |
| printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n"); |
| if (vsfx) |
| printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n"); |
| if (pcipci_fail) { |
| printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n"); |
| if (!no_overlay) { |
| printk(KERN_WARNING "bttv: overlay will be disabled.\n"); |
| no_overlay = 1; |
| } else { |
| printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n"); |
| } |
| } |
| if (UNSET != latency) |
| printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency); |
| while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, |
| PCI_DEVICE_ID_INTEL_82441, dev))) { |
| unsigned char b; |
| pci_read_config_byte(dev, 0x53, &b); |
| if (bttv_debug) |
| printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, " |
| "bufcon=0x%02x\n",b); |
| } |
| } |
| |
| int __devinit bttv_handle_chipset(struct bttv *btv) |
| { |
| unsigned char command; |
| |
| if (!triton1 && !vsfx && UNSET == latency) |
| return 0; |
| |
| if (bttv_verbose) { |
| if (triton1) |
| printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr); |
| if (vsfx && btv->id >= 878) |
| printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr); |
| if (UNSET != latency) |
| printk(KERN_INFO "bttv%d: setting pci timer to %d\n", |
| btv->c.nr,latency); |
| } |
| |
| if (btv->id < 878) { |
| /* bt848 (mis)uses a bit in the irq mask for etbf */ |
| if (triton1) |
| btv->triton1 = BT848_INT_ETBF; |
| } else { |
| /* bt878 has a bit in the pci config space for it */ |
| pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); |
| if (triton1) |
| command |= BT878_EN_TBFX; |
| if (vsfx) |
| command |= BT878_EN_VSFX; |
| pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); |
| } |
| if (UNSET != latency) |
| pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); |
| return 0; |
| } |
| |
| |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |