V4L/DVB (7262): Add support for xc3028-based boards
This patch adds support for the following saa7134 xc3028 based boards:
132 -> AVerMedia Cardbus TV/Radio (E506R) [1461:f436]
133 -> AVerMedia Hybrid TV/Radio (A16D) [1461:f936]
134 -> Avermedia M115 [1461:a836]
135 -> Compro VideoMate T750 [185b:c900]
This is based on a original patch thanks to Markus Rechberger that added xc3028
gpio init code for the above boards.
This patch moves saa7134_tuner_callback to saa7134-cards, originally used only
by tda8290 DVB-S boards. The callback was made more generic to support other
tuners.
Currently, it supports both tda8290 and xc2028/xc3028 tuners. Added also the
basis for xc5000 tuner callback.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 765a06b..c1f9f13 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -134,3 +134,7 @@
133 -> NXP Snake DVB-S reference design
134 -> Medion/Creatix CTX953 Hybrid [16be:0010]
135 -> MSI TV@nywhere A/D v1.1 [1462:8625]
+136 -> AVerMedia Cardbus TV/Radio (E506R) [1461:f436]
+137 -> AVerMedia Hybrid TV/Radio (A16D) [1461:f936]
+138 -> Avermedia M115 [1461:a836]
+139 -> Compro VideoMate T750 [185b:c900]
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index f9c85b7..6fde042 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -22,9 +22,12 @@
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
#include "saa7134-reg.h"
#include "saa7134.h"
+#include "tuner-xc2028.h"
#include <media/v4l2-common.h>
#include <media/tveeprom.h>
@@ -4064,6 +4067,97 @@
.gpio = 0x0200000,
},
},
+ [SAA7134_BOARD_AVERMEDIA_CARDBUS_506] = {
+ .name = "AVerMedia Cardbus TV/Radio (E506R)",
+ .audio_clock = 0x187de7,
+ .tuner_type = TUNER_XC2028,
+ /*
+ TODO:
+ .mpeg = SAA7134_MPEG_DVB,
+ */
+
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE2,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ },
+ },
+ [SAA7134_BOARD_AVERMEDIA_A16D] = {
+ .name = "AVerMedia Hybrid TV/Radio (A16D)",
+ .audio_clock = 0x187de7,
+ .tuner_type = TUNER_XC2028,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = LINE1,
+ },
+ },
+ [SAA7134_BOARD_AVERMEDIA_M115] = {
+ .name = "Avermedia M115",
+ .audio_clock = 0x187de7,
+ .tuner_type = TUNER_XC2028,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ } },
+ },
+ [SAA7134_BOARD_VIDEOMATE_T750] = {
+ /* John Newbigin <jn@it.swin.edu.au> */
+ .name = "Compro VideoMate T750",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_XC2028,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 3,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 1,
+ .amux = LINE2,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ }
+ }
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -5027,6 +5121,30 @@
.subdevice = 0x8625, /* TV@nywhere A/D v1.1 */
.driver_data = SAA7134_BOARD_MSI_TVANYWHERE_AD11,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xf436,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_CARDBUS_506,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xf936,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A16D,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0xa836,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_M115,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x185b,
+ .subdevice = 0xc900,
+ .driver_data = SAA7134_BOARD_VIDEOMATE_T750,
+ }, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -5082,6 +5200,67 @@
dev->name, dev->name, dev->name);
}
+static int saa7134_xc2028_callback(struct saa7134_dev *dev,
+ int command, int arg)
+{
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
+ saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02);
+ saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81);
+ saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7);
+ saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03);
+ saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2,
+ 0x0001e000, 0x0001e000);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+
+static int saa7134_tda8290_callback(struct saa7134_dev *dev,
+ int command, int arg)
+{
+ u8 sync_control;
+
+ switch (command) {
+ case 0: /* switch LNA gain through GPIO 22*/
+ saa7134_set_gpio(dev, 22, arg) ;
+ break;
+ case 1: /* vsync output at GPIO22. 50 / 60Hz */
+ saa_andorb(SAA7134_VIDEO_PORT_CTRL3, 0x80, 0x80);
+ saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x03);
+ if (arg == 1)
+ sync_control = 11;
+ else
+ sync_control = 17;
+ saa_writeb(SAA7134_VGATE_START, sync_control);
+ saa_writeb(SAA7134_VGATE_STOP, sync_control + 1);
+ saa_andorb(SAA7134_MISC_VGATE_MSB, 0x03, 0x00);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int saa7134_tuner_callback(void *priv, int command, int arg)
+{
+ struct i2c_algo_bit_data *i2c_algo = priv;
+ struct saa7134_dev *dev = i2c_algo->data;
+
+ switch (dev->tuner_type) {
+ case TUNER_PHILIPS_TDA8290:
+ return saa7134_tda8290_callback(dev, command, arg);
+ case TUNER_XC2028:
+ return saa7134_xc2028_callback(dev, command, arg);
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(saa7134_tuner_callback);
+
/* ----------------------------------------------------------- */
static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
@@ -5151,6 +5330,7 @@
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
+ case SAA7134_BOARD_VIDEOMATE_T750:
case SAA7134_BOARD_MANLI_MTV001:
case SAA7134_BOARD_MANLI_MTV002:
case SAA7134_BOARD_BEHOLD_409FM:
@@ -5217,6 +5397,8 @@
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000);
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ case SAA7134_BOARD_AVERMEDIA_M115:
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff);
@@ -5284,11 +5466,16 @@
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
if (TUNER_ABSENT != dev->tuner_type) {
- tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = ADDR_UNSET;
+ tun_setup.mode_mask = T_RADIO |
+ T_ANALOG_TV |
+ T_DIGITAL_TV;
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = ADDR_UNSET;
+ tun_setup.tuner_callback = saa7134_tuner_callback;
- saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+ saa7134_i2c_call_clients(dev,
+ TUNER_SET_TYPE_ADDR,
+ &tun_setup);
}
break;
case SAA7134_BOARD_MD7134:
@@ -5359,11 +5546,14 @@
&tda9887_cfg);
}
- tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
+ tun_setup.mode_mask = T_RADIO |
+ T_ANALOG_TV |
+ T_DIGITAL_TV;
tun_setup.type = dev->tuner_type;
tun_setup.addr = ADDR_UNSET;
- saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
+ saa7134_i2c_call_clients(dev,
+ TUNER_SET_TYPE_ADDR, &tun_setup);
}
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
@@ -5496,12 +5686,26 @@
}
break;
}
+
+ if (dev->tuner_type == TUNER_XC2028) {
+ struct v4l2_priv_tun_config xc2028_cfg;
+ struct xc2028_ctrl ctl;
+
+ memset(&xc2028_cfg, 0, sizeof(ctl));
+ memset(&ctl, 0, sizeof(ctl));
+
+ ctl.fname = XC2028_DEFAULT_FIRMWARE;
+ ctl.max_len = 64;
+
+ /* FIXME: This should be device-dependent */
+ ctl.demod = XC3028_FE_OREN538;
+ ctl.mts = 1;
+
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
+
+ saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ }
+
return 0;
}
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 4817a0e..ed96ce7 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -142,40 +142,6 @@
}
}
-int saa7134_tuner_callback(void *ptr, int command, int arg)
-{
- u8 sync_control;
- struct i2c_algo_bit_data *i2c_algo = priv;
- struct saa7134_dev *dev = i2c_algo->data;
-
- switch (dev->tuner_type) {
- case TUNER_PHILIPS_TDA8290:
- switch (command) {
- case 0: /* switch LNA gain through GPIO 22*/
- saa7134_set_gpio(dev, 22, arg) ;
- break;
- case 1: /* vsync output at GPIO22. 50 / 60Hz */
- dprintk("setting GPIO22 to vsync %d\n", arg);
- saa_andorb(SAA7134_VIDEO_PORT_CTRL3, 0x80, 0x80);
- saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x03);
- if (arg == 1)
- sync_control = 11;
- else
- sync_control = 17;
- saa_writeb(SAA7134_VGATE_START, sync_control);
- saa_writeb(SAA7134_VGATE_STOP, sync_control + 1);
- saa_andorb(SAA7134_MISC_VGATE_MSB, 0x03, 0x00);
- break;
- default:
- return -EINVAL;
- }
- break;
- default:
- return -ENODEV;
- }
- return 0;
-}
-
/* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index eabc67d..97d9178 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -38,6 +38,7 @@
#include "mt352_priv.h" /* FIXME */
#include "tda1004x.h"
#include "nxt200x.h"
+#include "tuner-xc2028.h"
#include "tda10086.h"
#include "tda826x.h"
@@ -190,6 +191,11 @@
.demod_init = mt352_aver777_init,
};
+static struct mt352_config avermedia_e506r_mt352_dev = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+};
+
/* ==================================================================
* tda1004x based DVB-T cards, helper functions
*/
@@ -895,6 +901,8 @@
static int dvb_init(struct saa7134_dev *dev)
{
int ret;
+ int attach_xc3028 = 0;
+
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
@@ -1142,11 +1150,35 @@
case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
configure_tda827x_fe(dev, &philips_tiger_s_config);
break;
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ dev->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_e506r_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
}
+ if (attach_xc3028) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_adap,
+ .i2c_addr = 0x61,
+ .video_dev = dev,
+ };
+ fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
+ if (!fe) {
+ printk(KERN_ERR "%s/2: xc3028 attach failed\n",
+ dev->name);
+ dvb_frontend_detach(dev->dvb.frontend);
+ dvb_unregister_frontend(dev->dvb.frontend);
+ dev->dvb.frontend = NULL;
+ return -1;
+ }
+ }
+
if (NULL == dev->dvb.frontend) {
printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
return -1;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index d7e0781..ba88a10 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -257,6 +257,11 @@
#define SAA7134_BOARD_PHILIPS_SNAKE 133
#define SAA7134_BOARD_CREATIX_CTX953 134
#define SAA7134_BOARD_MSI_TVANYWHERE_AD11 135
+#define SAA7134_BOARD_AVERMEDIA_CARDBUS_506 136
+#define SAA7134_BOARD_AVERMEDIA_A16D 137
+#define SAA7134_BOARD_AVERMEDIA_M115 138
+#define SAA7134_BOARD_VIDEOMATE_T750 139
+
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
@@ -599,7 +604,6 @@
void saa7134_track_gpio(struct saa7134_dev *dev, char *msg);
void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value);
-int saa7134_tuner_callback(void *ptr, int command, int arg);
#define SAA7134_PGTABLE_SIZE 4096
@@ -636,6 +640,7 @@
extern int saa7134_board_init1(struct saa7134_dev *dev);
extern int saa7134_board_init2(struct saa7134_dev *dev);
+int saa7134_tuner_callback(void *priv, int command, int arg);
/* ----------------------------------------------------------- */