blob: f0104bfe544e378c6a778d853fbd3fc822669087 [file] [log] [blame]
/*
* Lager board support
*
* Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
* Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/rcar-du.h>
#include <linux/platform_data/usb-rcar-gen2-phy.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <linux/usb/phy.h>
#include <linux/usb/renesas_usbhs.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
/*
* SSI-AK4643
*
* SW1: 1: AK4643
* 2: CN22
* 3: ADV7511
*
* this command is required when playback.
*
* # amixer set "LINEOUT Mixer DACL" on
*/
/*
* SDHI0 (CN8)
*
* JP3: pin1
* SW20: pin1
* GP5_24: 1: VDD 3.3V (defult)
* 0: VDD 0.0V
* GP5_29: 1: VccQ 3.3V (defult)
* 0: VccQ 1.8V
*
*/
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
{
.type = RCAR_DU_ENCODER_VGA,
.output = RCAR_DU_OUTPUT_DPAD0,
}, {
.type = RCAR_DU_ENCODER_NONE,
.output = RCAR_DU_OUTPUT_LVDS1,
.connector.lvds.panel = {
.width_mm = 210,
.height_mm = 158,
.mode = {
.clock = 65000,
.hdisplay = 1024,
.hsync_start = 1048,
.hsync_end = 1184,
.htotal = 1344,
.vdisplay = 768,
.vsync_start = 771,
.vsync_end = 777,
.vtotal = 806,
.flags = 0,
},
},
},
};
static const struct rcar_du_platform_data lager_du_pdata __initconst = {
.encoders = lager_du_encoders,
.num_encoders = ARRAY_SIZE(lager_du_encoders),
};
static const struct resource du_resources[] __initconst = {
DEFINE_RES_MEM(0xfeb00000, 0x70000),
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
DEFINE_RES_IRQ(gic_spi(256)),
DEFINE_RES_IRQ(gic_spi(268)),
DEFINE_RES_IRQ(gic_spi(269)),
};
static void __init lager_add_du_device(void)
{
struct platform_device_info info = {
.name = "rcar-du-r8a7790",
.id = -1,
.res = du_resources,
.num_res = ARRAY_SIZE(du_resources),
.data = &lager_du_pdata,
.size_data = sizeof(lager_du_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&info);
}
/* LEDS */
static struct gpio_led lager_leds[] = {
{
.name = "led8",
.gpio = RCAR_GP_PIN(5, 17),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led7",
.gpio = RCAR_GP_PIN(4, 23),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led6",
.gpio = RCAR_GP_PIN(4, 22),
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
.leds = lager_leds,
.num_leds = ARRAY_SIZE(lager_leds),
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
.wakeup = 1, .debounce_interval = 20 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"),
GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"),
GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"),
};
static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
/* Fixed 3.3V regulator to be used by MMCIF */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
};
/*
* SDHI regulator macro
*
** FIXME**
* Lager board vqmmc is provided via DA9063 PMIC chip,
* and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
* but, it doesn't have regulator support at this point.
* It uses gpio-regulator for vqmmc as quick-hack.
*/
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
.supply_name = "SDHI" #idx "Vcc", \
.microvolts = 3300000, \
.gpio = vdd_pin, \
.enable_high = 1, \
.init_data = &vcc_sdhi##idx##_init_data, \
}; \
\
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
.constraints = { \
.input_uV = 3300000, \
.min_uV = 1800000, \
.max_uV = 3300000, \
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static struct gpio vccq_sdhi##idx##_gpio = \
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
\
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
{ .value = 1800000, .gpios = 0 }, \
{ .value = 3300000, .gpios = 1 }, \
}; \
\
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
.supply_name = "vqmmc", \
.gpios = &vccq_sdhi##idx##_gpio, \
.nr_gpios = 1, \
.states = vccq_sdhi##idx##_states, \
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
.type = REGULATOR_VOLTAGE, \
.init_data = &vccq_sdhi##idx##_init_data, \
};
SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
/* MMCIF */
static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
.clk_ctrl2_present = true,
.ccs_unsupported = true,
};
static const struct resource mmcif1_resources[] __initconst = {
DEFINE_RES_MEM(0xee220000, 0x80),
DEFINE_RES_IRQ(gic_spi(170)),
};
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x1,
.phy_irq = irq_pin(0),
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
static const struct resource ether_resources[] __initconst = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
static const struct platform_device_info ether_info __initconst = {
.parent = &platform_bus,
.name = "r8a7790-ether",
.id = -1,
.res = ether_resources,
.num_res = ARRAY_SIZE(ether_resources),
.data = &ether_pdata,
.size_data = sizeof(ether_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
static struct mtd_partition spi_flash_part[] = {
/* Reserved for user loader program, read-only */
{
.name = "loader",
.offset = 0,
.size = SZ_256K,
.mask_flags = MTD_WRITEABLE,
},
/* Reserved for user program, read-only */
{
.name = "user",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = MTD_WRITEABLE,
},
/* All else is writable (e.g. JFFS2) */
{
.name = "flash",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
};
static const struct flash_platform_data spi_flash_data = {
.name = "m25p80",
.parts = spi_flash_part,
.nr_parts = ARRAY_SIZE(spi_flash_part),
.type = "s25fl512s",
};
static const struct rspi_plat_data qspi_pdata __initconst = {
.num_chipselect = 1,
};
static const struct spi_board_info spi_info[] __initconst = {
{
.modalias = "m25p80",
.platform_data = &spi_flash_data,
.mode = SPI_MODE_0,
.max_speed_hz = 30000000,
.bus_num = 0,
.chip_select = 0,
},
};
/* QSPI resource */
static const struct resource qspi_resources[] __initconst = {
DEFINE_RES_MEM(0xe6b10000, 0x1000),
DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
};
/* VIN */
static const struct resource vin_resources[] __initconst = {
/* VIN0 */
DEFINE_RES_MEM(0xe6ef0000, 0x1000),
DEFINE_RES_IRQ(gic_spi(188)),
/* VIN1 */
DEFINE_RES_MEM(0xe6ef1000, 0x1000),
DEFINE_RES_IRQ(gic_spi(189)),
};
static void __init lager_add_vin_device(unsigned idx,
struct rcar_vin_platform_data *pdata)
{
struct platform_device_info vin_info = {
.parent = &platform_bus,
.name = "r8a7790-vin",
.id = idx,
.res = &vin_resources[idx * 2],
.num_res = 2,
.dma_mask = DMA_BIT_MASK(32),
.data = pdata,
.size_data = sizeof(*pdata),
};
BUG_ON(idx > 1);
platform_device_register_full(&vin_info);
}
#define LAGER_CAMERA(idx, name, addr, pdata, flag) \
static struct i2c_board_info i2c_cam##idx##_device = { \
I2C_BOARD_INFO(name, addr), \
}; \
\
static struct rcar_vin_platform_data vin##idx##_pdata = { \
.flags = flag, \
}; \
\
static struct soc_camera_link cam##idx##_link = { \
.bus_id = idx, \
.board_info = &i2c_cam##idx##_device, \
.i2c_adapter_id = 2, \
.module_name = name, \
.priv = pdata, \
}
/* Camera 0 is not currently supported due to adv7612 support missing */
LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
static void __init lager_add_camera1_device(void)
{
platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
&cam1_link, sizeof(cam1_link));
lager_add_vin_device(1, &vin1_pdata);
}
/* SATA1 */
static const struct resource sata1_resources[] __initconst = {
DEFINE_RES_MEM(0xee500000, 0x2000),
DEFINE_RES_IRQ(gic_spi(106)),
};
static const struct platform_device_info sata1_info __initconst = {
.parent = &platform_bus,
.name = "sata-r8a7790",
.id = 1,
.res = sata1_resources,
.num_res = ARRAY_SIZE(sata1_resources),
.dma_mask = DMA_BIT_MASK(32),
};
/* USBHS */
static const struct resource usbhs_resources[] __initconst = {
DEFINE_RES_MEM(0xe6590000, 0x100),
DEFINE_RES_IRQ(gic_spi(107)),
};
struct usbhs_private {
struct renesas_usbhs_platform_info info;
struct usb_phy *phy;
};
#define usbhs_get_priv(pdev) \
container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
static int usbhs_power_ctrl(struct platform_device *pdev,
void __iomem *base, int enable)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
if (!priv->phy)
return -ENODEV;
if (enable) {
int retval = usb_phy_init(priv->phy);
if (!retval)
retval = usb_phy_set_suspend(priv->phy, 0);
return retval;
}
usb_phy_set_suspend(priv->phy, 1);
usb_phy_shutdown(priv->phy);
return 0;
}
static int usbhs_hardware_init(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
struct usb_phy *phy;
int ret;
/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
* setting to avoid VBUS short circuit due to wrong cable.
* PWEN should be pulled up high if USB Function is selected by SW5
*/
gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
ret = -ENOTSUPP;
goto error;
}
phy = usb_get_phy_dev(&pdev->dev, 0);
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
goto error;
}
priv->phy = phy;
return 0;
error:
gpio_free(RCAR_GP_PIN(5, 18));
return ret;
}
static int usbhs_hardware_exit(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
if (!priv->phy)
return 0;
usb_put_phy(priv->phy);
priv->phy = NULL;
gpio_free(RCAR_GP_PIN(5, 18));
return 0;
}
static int usbhs_get_id(struct platform_device *pdev)
{
return USBHS_GADGET;
}
static u32 lager_usbhs_pipe_type[] = {
USB_ENDPOINT_XFER_CONTROL,
USB_ENDPOINT_XFER_ISOC,
USB_ENDPOINT_XFER_ISOC,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
};
static struct usbhs_private usbhs_priv __initdata = {
.info = {
.platform_callback = {
.power_ctrl = usbhs_power_ctrl,
.hardware_init = usbhs_hardware_init,
.hardware_exit = usbhs_hardware_exit,
.get_id = usbhs_get_id,
},
.driver_param = {
.buswait_bwait = 4,
.pipe_type = lager_usbhs_pipe_type,
.pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type),
},
}
};
static void __init lager_register_usbhs(void)
{
usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
platform_device_register_resndata(&platform_bus,
"renesas_usbhs", -1,
usbhs_resources,
ARRAY_SIZE(usbhs_resources),
&usbhs_priv.info,
sizeof(usbhs_priv.info));
}
/* USBHS PHY */
static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
.chan0_pci = 0, /* Channel 0 is USBHS */
.chan2_pci = 1, /* Channel 2 is PCI USB */
};
static const struct resource usbhs_phy_resources[] __initconst = {
DEFINE_RES_MEM(0xe6590100, 0x100),
};
/* I2C */
static struct i2c_board_info i2c2_devices[] = {
{
I2C_BOARD_INFO("ak4643", 0x12),
}
};
/* Sound */
static struct resource rsnd_resources[] __initdata = {
[RSND_GEN2_SCU] = DEFINE_RES_MEM(0xec500000, 0x1000),
[RSND_GEN2_ADG] = DEFINE_RES_MEM(0xec5a0000, 0x100),
[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
[RSND_GEN2_SSI] = DEFINE_RES_MEM(0xec541000, 0x1280),
};
static struct rsnd_ssi_platform_info rsnd_ssi[] = {
RSND_SSI_SET(0, 0, gic_spi(370), RSND_SSI_PLAY),
RSND_SSI_SET(0, 0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE),
};
static struct rsnd_scu_platform_info rsnd_scu[2] = {
/* no member at this point */
};
static struct rcar_snd_info rsnd_info = {
.flags = RSND_GEN2,
.ssi_info = rsnd_ssi,
.ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
.scu_info = rsnd_scu,
.scu_info_nr = ARRAY_SIZE(rsnd_scu),
};
static struct asoc_simple_card_info rsnd_card_info = {
.name = "AK4643",
.card = "SSI01-AK4643",
.codec = "ak4642-codec.2-0012",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_LEFT_J,
.cpu_dai = {
.name = "rcar_sound",
.fmt = SND_SOC_DAIFMT_CBS_CFS,
},
.codec_dai = {
.name = "ak4642-hifi",
.fmt = SND_SOC_DAIFMT_CBM_CFM,
.sysclk = 11289600,
},
};
static void __init lager_add_rsnd_device(void)
{
struct platform_device_info cardinfo = {
.parent = &platform_bus,
.name = "asoc-simple-card",
.id = -1,
.data = &rsnd_card_info,
.size_data = sizeof(struct asoc_simple_card_info),
.dma_mask = DMA_BIT_MASK(32),
};
i2c_register_board_info(2, i2c2_devices,
ARRAY_SIZE(i2c2_devices));
platform_device_register_resndata(
&platform_bus, "rcar_sound", -1,
rsnd_resources, ARRAY_SIZE(rsnd_resources),
&rsnd_info, sizeof(rsnd_info));
platform_device_register_full(&cardinfo);
}
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi0_resources[] __initdata = {
DEFINE_RES_MEM(0xee100000, 0x200),
DEFINE_RES_IRQ(gic_spi(165)),
};
/* SDHI2 */
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi2_resources[] __initdata = {
DEFINE_RES_MEM(0xee140000, 0x100),
DEFINE_RES_IRQ(gic_spi(167)),
};
/* Internal PCI1 */
static const struct resource pci1_resources[] __initconst = {
DEFINE_RES_MEM(0xee0b0000, 0x10000), /* CFG */
DEFINE_RES_MEM(0xee0a0000, 0x10000), /* MEM */
DEFINE_RES_IRQ(gic_spi(112)),
};
static const struct platform_device_info pci1_info __initconst = {
.parent = &platform_bus,
.name = "pci-rcar-gen2",
.id = 1,
.res = pci1_resources,
.num_res = ARRAY_SIZE(pci1_resources),
.dma_mask = DMA_BIT_MASK(32),
};
static void __init lager_add_usb1_device(void)
{
platform_device_register_full(&pci1_info);
}
/* Internal PCI2 */
static const struct resource pci2_resources[] __initconst = {
DEFINE_RES_MEM(0xee0d0000, 0x10000), /* CFG */
DEFINE_RES_MEM(0xee0c0000, 0x10000), /* MEM */
DEFINE_RES_IRQ(gic_spi(113)),
};
static const struct platform_device_info pci2_info __initconst = {
.parent = &platform_bus,
.name = "pci-rcar-gen2",
.id = 2,
.res = pci2_resources,
.num_res = ARRAY_SIZE(pci2_resources),
.dma_mask = DMA_BIT_MASK(32),
};
static void __init lager_add_usb2_device(void)
{
platform_device_register_full(&pci2_info);
}
static const struct pinctrl_map lager_pinctrl_map[] = {
/* DU (CN10: ARGB0, CN13: LVDS) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_rgb666", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_sync_1", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_clk_out_0", "du"),
/* I2C2 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
"i2c2", "i2c2"),
/* QSPI */
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
"qspi_ctrl", "qspi"),
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
"qspi_data4", "qspi"),
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
"scif0_data", "scif0"),
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
"scif1_data", "scif1"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
"sdhi0_cd", "sdhi0"),
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
"sdhi2_data4", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
"sdhi2_ctrl", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
"sdhi2_cd", "sdhi2"),
/* SSI (CN17: sound) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"ssi0129_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"ssi0_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"ssi1_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"audio_clk_a", "audio_clk"),
/* MMCIF1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_data8", "mmc1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_ctrl", "mmc1"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_link", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_mdio", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_rmii", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"intc_irq0", "intc"),
/* VIN0 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_data24", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_sync", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_field", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_clkenb", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_clk", "vin0"),
/* VIN1 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
"vin1_data8", "vin1"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
"vin1_clk", "vin1"),
/* USB0 */
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
"usb0_ovc_vbus", "usb0"),
/* USB1 */
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790",
"usb1", "usb1"),
/* USB2 */
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790",
"usb2", "usb2"),
};
static void __init lager_add_standard_devices(void)
{
int fixed_regulator_idx = 0;
int gpio_regulator_idx = 0;
r8a7790_clock_init();
pinctrl_register_mappings(lager_pinctrl_map,
ARRAY_SIZE(lager_pinctrl_map));
r8a7790_pinmux_init();
r8a7790_add_standard_devices();
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&lager_leds_pdata,
sizeof(lager_leds_pdata));
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&lager_keys_pdata,
sizeof(lager_keys_pdata));
regulator_register_always_on(fixed_regulator_idx++,
"fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
&mmcif1_pdata, sizeof(mmcif1_pdata));
platform_device_register_full(&ether_info);
lager_add_du_device();
platform_device_register_resndata(&platform_bus, "qspi", 0,
qspi_resources,
ARRAY_SIZE(qspi_resources),
&qspi_pdata, sizeof(qspi_pdata));
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
lager_add_camera1_device();
platform_device_register_full(&sata1_info);
platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2",
-1, usbhs_phy_resources,
ARRAY_SIZE(usbhs_phy_resources),
&usbhs_phy_pdata,
sizeof(usbhs_phy_pdata));
lager_register_usbhs();
lager_add_usb1_device();
lager_add_usb2_device();
lager_add_rsnd_device();
platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
&sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
}
/*
* Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
* 14-15. We have to set them back to 01 from the default 00 value each time
* the PHY is reset. It's also important because the PHY's LED0 signal is
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
* bounce on and off after each packet, which we apparently want to avoid.
*/
static int lager_ksz8041_fixup(struct phy_device *phydev)
{
u16 phyctrl1 = phy_read(phydev, 0x1e);
phyctrl1 &= ~0xc000;
phyctrl1 |= 0x4000;
return phy_write(phydev, 0x1e, phyctrl1);
}
static void __init lager_init(void)
{
lager_add_standard_devices();
irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_id("r8a7790-ether-ff:01",
lager_ksz8041_fixup);
}
static const char * const lager_boards_compat_dt[] __initconst = {
"renesas,lager",
NULL,
};
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.init_late = shmobile_init_late,
.dt_compat = lager_boards_compat_dt,
MACHINE_END