diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 0a5bea9..987a165 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1199,6 +1199,26 @@
 }
 EXPORT_SYMBOL(cpufreq_quick_get);
 
+/**
+ * cpufreq_quick_get_max - get the max reported CPU frequency for this CPU
+ * @cpu: CPU number
+ *
+ * Just return the max possible frequency for a given CPU.
+ */
+unsigned int cpufreq_quick_get_max(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	unsigned int ret_freq = 0;
+
+	if (policy) {
+		ret_freq = policy->max;
+		cpufreq_cpu_put(policy);
+	}
+
+	return ret_freq;
+}
+EXPORT_SYMBOL(cpufreq_quick_get_max);
+
 
 static unsigned int __cpufreq_get(unsigned int cpu)
 {
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 92369655..f88a9b2 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -560,6 +560,11 @@
 			mode_changed = true;
 		} else if (set->fb == NULL) {
 			mode_changed = true;
+		} else if (set->fb->depth != set->crtc->fb->depth) {
+			mode_changed = true;
+		} else if (set->fb->bits_per_pixel !=
+			   set->crtc->fb->bits_per_pixel) {
+			mode_changed = true;
 		} else
 			fb_changed = true;
 	}
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 0a893f7..e2662497 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -865,7 +865,7 @@
 			   MEMSTAT_VID_SHIFT);
 		seq_printf(m, "Current P-state: %d\n",
 			   (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
-	} else if (IS_GEN6(dev)) {
+	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
 		u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
 		u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS);
 		u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
@@ -1123,6 +1123,44 @@
 	return 0;
 }
 
+static int i915_ring_freq_table(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+	int gpu_freq, ia_freq;
+
+	if (!(IS_GEN6(dev) || IS_GEN7(dev))) {
+		seq_printf(m, "unsupported on this chipset\n");
+		return 0;
+	}
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\n");
+
+	for (gpu_freq = dev_priv->min_delay; gpu_freq <= dev_priv->max_delay;
+	     gpu_freq++) {
+		I915_WRITE(GEN6_PCODE_DATA, gpu_freq);
+		I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
+			   GEN6_PCODE_READ_MIN_FREQ_TABLE);
+		if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
+			      GEN6_PCODE_READY) == 0, 10)) {
+			DRM_ERROR("pcode read of freq table timed out\n");
+			continue;
+		}
+		ia_freq = I915_READ(GEN6_PCODE_DATA);
+		seq_printf(m, "%d\t\t%d\n", gpu_freq * 50, ia_freq * 100);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
 static int i915_gfxec(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
@@ -1430,6 +1468,7 @@
 	{"i915_inttoext_table", i915_inttoext_table, 0},
 	{"i915_drpc_info", i915_drpc_info, 0},
 	{"i915_emon_status", i915_emon_status, 0},
+	{"i915_ring_freq_table", i915_ring_freq_table, 0},
 	{"i915_gfxec", i915_gfxec, 0},
 	{"i915_fbc_status", i915_fbc_status, 0},
 	{"i915_sr_status", i915_sr_status, 0},
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 013d304..649278f 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -70,6 +70,9 @@
 static bool i915_try_reset = true;
 module_param_named(reset, i915_try_reset, bool, 0600);
 
+bool i915_enable_hangcheck = true;
+module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
+
 static struct drm_driver driver;
 extern int intel_agp_enabled;
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f245c58..a15f2c0 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -214,6 +214,8 @@
 	int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
 			  struct drm_framebuffer *fb,
 			  struct drm_i915_gem_object *obj);
+	int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			    int x, int y);
 	/* clock updates for mode set */
 	/* cursor updates */
 	/* render clock increase/decrease */
@@ -994,6 +996,7 @@
 extern int i915_vbt_sdvo_panel_type;
 extern unsigned int i915_enable_rc6;
 extern unsigned int i915_enable_fbc;
+extern bool i915_enable_hangcheck;
 
 extern int i915_suspend(struct drm_device *dev, pm_message_t state);
 extern int i915_resume(struct drm_device *dev);
@@ -1163,7 +1166,7 @@
 int __must_check i915_gem_object_set_domain(struct drm_i915_gem_object *obj,
 					    uint32_t read_domains,
 					    uint32_t write_domain);
-int __must_check i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj);
+int __must_check i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj);
 int __must_check i915_gem_init_ringbuffer(struct drm_device *dev);
 void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
 void i915_gem_do_init(struct drm_device *dev,
@@ -1182,7 +1185,8 @@
 i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj,
 				  bool write);
 int __must_check
-i915_gem_object_set_to_display_plane(struct drm_i915_gem_object *obj,
+i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
+				     u32 alignment,
 				     struct intel_ring_buffer *pipelined);
 int i915_gem_attach_phys_object(struct drm_device *dev,
 				struct drm_i915_gem_object *obj,
@@ -1196,9 +1200,14 @@
 uint32_t
 i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj);
 
+int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
+				    enum i915_cache_level cache_level);
+
 /* i915_gem_gtt.c */
 void i915_gem_restore_gtt_mappings(struct drm_device *dev);
 int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj);
+void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
+				enum i915_cache_level cache_level);
 void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj);
 
 /* i915_gem_evict.c */
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5c0d124..e9d1d5c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1771,8 +1771,11 @@
 	ring->outstanding_lazy_request = false;
 
 	if (!dev_priv->mm.suspended) {
-		mod_timer(&dev_priv->hangcheck_timer,
-			  jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
+		if (i915_enable_hangcheck) {
+			mod_timer(&dev_priv->hangcheck_timer,
+				  jiffies +
+				  msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
+		}
 		if (was_empty)
 			queue_delayed_work(dev_priv->wq,
 					   &dev_priv->mm.retire_work, HZ);
@@ -2143,6 +2146,30 @@
 	return 0;
 }
 
+static void i915_gem_object_finish_gtt(struct drm_i915_gem_object *obj)
+{
+	u32 old_write_domain, old_read_domains;
+
+	/* Act a barrier for all accesses through the GTT */
+	mb();
+
+	/* Force a pagefault for domain tracking on next user access */
+	i915_gem_release_mmap(obj);
+
+	if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0)
+		return;
+
+	old_read_domains = obj->base.read_domains;
+	old_write_domain = obj->base.write_domain;
+
+	obj->base.read_domains &= ~I915_GEM_DOMAIN_GTT;
+	obj->base.write_domain &= ~I915_GEM_DOMAIN_GTT;
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    old_write_domain);
+}
+
 /**
  * Unbinds an object from the GTT aperture.
  */
@@ -2159,23 +2186,28 @@
 		return -EINVAL;
 	}
 
-	/* blow away mappings if mapped through GTT */
-	i915_gem_release_mmap(obj);
-
-	/* Move the object to the CPU domain to ensure that
-	 * any possible CPU writes while it's not in the GTT
-	 * are flushed when we go to remap it. This will
-	 * also ensure that all pending GPU writes are finished
-	 * before we unbind.
-	 */
-	ret = i915_gem_object_set_to_cpu_domain(obj, 1);
+	ret = i915_gem_object_finish_gpu(obj);
 	if (ret == -ERESTARTSYS)
 		return ret;
 	/* Continue on if we fail due to EIO, the GPU is hung so we
 	 * should be safe and we need to cleanup or else we might
 	 * cause memory corruption through use-after-free.
 	 */
+
+	i915_gem_object_finish_gtt(obj);
+
+	/* Move the object to the CPU domain to ensure that
+	 * any possible CPU writes while it's not in the GTT
+	 * are flushed when we go to remap it.
+	 */
+	if (ret == 0)
+		ret = i915_gem_object_set_to_cpu_domain(obj, 1);
+	if (ret == -ERESTARTSYS)
+		return ret;
 	if (ret) {
+		/* In the event of a disaster, abandon all caches and
+		 * hope for the best.
+		 */
 		i915_gem_clflush_object(obj);
 		obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU;
 	}
@@ -2997,51 +3029,139 @@
 	return 0;
 }
 
-/*
- * Prepare buffer for display plane. Use uninterruptible for possible flush
- * wait, as in modesetting process we're not supposed to be interrupted.
- */
-int
-i915_gem_object_set_to_display_plane(struct drm_i915_gem_object *obj,
-				     struct intel_ring_buffer *pipelined)
+int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
+				    enum i915_cache_level cache_level)
 {
-	uint32_t old_read_domains;
 	int ret;
 
-	/* Not valid to be called on unbound objects. */
-	if (obj->gtt_space == NULL)
-		return -EINVAL;
+	if (obj->cache_level == cache_level)
+		return 0;
+
+	if (obj->pin_count) {
+		DRM_DEBUG("can not change the cache level of pinned objects\n");
+		return -EBUSY;
+	}
+
+	if (obj->gtt_space) {
+		ret = i915_gem_object_finish_gpu(obj);
+		if (ret)
+			return ret;
+
+		i915_gem_object_finish_gtt(obj);
+
+		/* Before SandyBridge, you could not use tiling or fence
+		 * registers with snooped memory, so relinquish any fences
+		 * currently pointing to our region in the aperture.
+		 */
+		if (INTEL_INFO(obj->base.dev)->gen < 6) {
+			ret = i915_gem_object_put_fence(obj);
+			if (ret)
+				return ret;
+		}
+
+		i915_gem_gtt_rebind_object(obj, cache_level);
+	}
+
+	if (cache_level == I915_CACHE_NONE) {
+		u32 old_read_domains, old_write_domain;
+
+		/* If we're coming from LLC cached, then we haven't
+		 * actually been tracking whether the data is in the
+		 * CPU cache or not, since we only allow one bit set
+		 * in obj->write_domain and have been skipping the clflushes.
+		 * Just set it to the CPU cache for now.
+		 */
+		WARN_ON(obj->base.write_domain & ~I915_GEM_DOMAIN_CPU);
+		WARN_ON(obj->base.read_domains & ~I915_GEM_DOMAIN_CPU);
+
+		old_read_domains = obj->base.read_domains;
+		old_write_domain = obj->base.write_domain;
+
+		obj->base.read_domains = I915_GEM_DOMAIN_CPU;
+		obj->base.write_domain = I915_GEM_DOMAIN_CPU;
+
+		trace_i915_gem_object_change_domain(obj,
+						    old_read_domains,
+						    old_write_domain);
+	}
+
+	obj->cache_level = cache_level;
+	return 0;
+}
+
+/*
+ * Prepare buffer for display plane (scanout, cursors, etc).
+ * Can be called from an uninterruptible phase (modesetting) and allows
+ * any flushes to be pipelined (for pageflips).
+ *
+ * For the display plane, we want to be in the GTT but out of any write
+ * domains. So in many ways this looks like set_to_gtt_domain() apart from the
+ * ability to pipeline the waits, pinning and any additional subtleties
+ * that may differentiate the display plane from ordinary buffers.
+ */
+int
+i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
+				     u32 alignment,
+				     struct intel_ring_buffer *pipelined)
+{
+	u32 old_read_domains, old_write_domain;
+	int ret;
 
 	ret = i915_gem_object_flush_gpu_write_domain(obj);
 	if (ret)
 		return ret;
 
-
-	/* Currently, we are always called from an non-interruptible context. */
 	if (pipelined != obj->ring) {
 		ret = i915_gem_object_wait_rendering(obj);
 		if (ret)
 			return ret;
 	}
 
+	/* The display engine is not coherent with the LLC cache on gen6.  As
+	 * a result, we make sure that the pinning that is about to occur is
+	 * done with uncached PTEs. This is lowest common denominator for all
+	 * chipsets.
+	 *
+	 * However for gen6+, we could do better by using the GFDT bit instead
+	 * of uncaching, which would allow us to flush all the LLC-cached data
+	 * with that bit in the PTE to main memory with just one PIPE_CONTROL.
+	 */
+	ret = i915_gem_object_set_cache_level(obj, I915_CACHE_NONE);
+	if (ret)
+		return ret;
+
+	/* As the user may map the buffer once pinned in the display plane
+	 * (e.g. libkms for the bootup splash), we have to ensure that we
+	 * always use map_and_fenceable for all scanout buffers.
+	 */
+	ret = i915_gem_object_pin(obj, alignment, true);
+	if (ret)
+		return ret;
+
 	i915_gem_object_flush_cpu_write_domain(obj);
 
+	old_write_domain = obj->base.write_domain;
 	old_read_domains = obj->base.read_domains;
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
 	obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
 
 	trace_i915_gem_object_change_domain(obj,
 					    old_read_domains,
-					    obj->base.write_domain);
+					    old_write_domain);
 
 	return 0;
 }
 
 int
-i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj)
+i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj)
 {
 	int ret;
 
-	if (!obj->active)
+	if ((obj->base.read_domains & I915_GEM_GPU_DOMAINS) == 0)
 		return 0;
 
 	if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
@@ -3050,6 +3170,9 @@
 			return ret;
 	}
 
+	/* Ensure that we invalidate the GPU's caches and TLBs. */
+	obj->base.read_domains &= ~I915_GEM_GPU_DOMAINS;
+
 	return i915_gem_object_wait_rendering(obj);
 }
 
@@ -3576,7 +3699,23 @@
 	obj->base.write_domain = I915_GEM_DOMAIN_CPU;
 	obj->base.read_domains = I915_GEM_DOMAIN_CPU;
 
-	obj->cache_level = I915_CACHE_NONE;
+	if (IS_GEN6(dev)) {
+		/* On Gen6, we can have the GPU use the LLC (the CPU
+		 * cache) for about a 10% performance improvement
+		 * compared to uncached.  Graphics requests other than
+		 * display scanout are coherent with the CPU in
+		 * accessing this cache.  This means in this mode we
+		 * don't need to clflush on the CPU side, and on the
+		 * GPU side we only need to flush internal caches to
+		 * get data visible to the CPU.
+		 *
+		 * However, we maintain the display planes as UC, and so
+		 * need to rebind when first used as such.
+		 */
+		obj->cache_level = I915_CACHE_LLC;
+	} else
+		obj->cache_level = I915_CACHE_NONE;
+
 	obj->base.driver_private = NULL;
 	obj->fence_reg = I915_FENCE_REG_NONE;
 	INIT_LIST_HEAD(&obj->mm_list);
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index e46b645..7a709cd 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -59,24 +59,8 @@
 			      (dev_priv->mm.gtt_end - dev_priv->mm.gtt_start) / PAGE_SIZE);
 
 	list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
-		unsigned int agp_type =
-			cache_level_to_agp_type(dev, obj->cache_level);
-
 		i915_gem_clflush_object(obj);
-
-		if (dev_priv->mm.gtt->needs_dmar) {
-			BUG_ON(!obj->sg_list);
-
-			intel_gtt_insert_sg_entries(obj->sg_list,
-						    obj->num_sg,
-						    obj->gtt_space->start >> PAGE_SHIFT,
-						    agp_type);
-		} else
-			intel_gtt_insert_pages(obj->gtt_space->start
-						   >> PAGE_SHIFT,
-					       obj->base.size >> PAGE_SHIFT,
-					       obj->pages,
-					       agp_type);
+		i915_gem_gtt_rebind_object(obj, obj->cache_level);
 	}
 
 	intel_gtt_chipset_flush();
@@ -110,6 +94,27 @@
 	return 0;
 }
 
+void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
+				enum i915_cache_level cache_level)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned int agp_type = cache_level_to_agp_type(dev, cache_level);
+
+	if (dev_priv->mm.gtt->needs_dmar) {
+		BUG_ON(!obj->sg_list);
+
+		intel_gtt_insert_sg_entries(obj->sg_list,
+					    obj->num_sg,
+					    obj->gtt_space->start >> PAGE_SHIFT,
+					    agp_type);
+	} else
+		intel_gtt_insert_pages(obj->gtt_space->start >> PAGE_SHIFT,
+				       obj->base.size >> PAGE_SHIFT,
+				       obj->pages,
+				       agp_type);
+}
+
 void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
 {
 	intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 3b03f85..23d1ae6 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -361,10 +361,12 @@
 
 	ring->irq_seqno = seqno;
 	wake_up_all(&ring->irq_queue);
-
-	dev_priv->hangcheck_count = 0;
-	mod_timer(&dev_priv->hangcheck_timer,
-		  jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
+	if (i915_enable_hangcheck) {
+		dev_priv->hangcheck_count = 0;
+		mod_timer(&dev_priv->hangcheck_timer,
+			  jiffies +
+			  msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
+	}
 }
 
 static void gen6_pm_rps_work(struct work_struct *work)
@@ -1664,6 +1666,9 @@
 	uint32_t acthd, instdone, instdone1;
 	bool err = false;
 
+	if (!i915_enable_hangcheck)
+		return;
+
 	/* If all work is done then ACTHD clearly hasn't advanced. */
 	if (i915_hangcheck_ring_idle(&dev_priv->ring[RCS], &err) &&
 	    i915_hangcheck_ring_idle(&dev_priv->ring[VCS], &err) &&
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5d5def7..4a446b1 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3434,7 +3434,9 @@
 #define GEN6_PCODE_MAILBOX			0x138124
 #define   GEN6_PCODE_READY			(1<<31)
 #define   GEN6_READ_OC_PARAMS			0xc
-#define   GEN6_PCODE_WRITE_MIN_FREQ_TABLE	0x9
+#define   GEN6_PCODE_WRITE_MIN_FREQ_TABLE	0x8
+#define   GEN6_PCODE_READ_MIN_FREQ_TABLE	0x9
 #define GEN6_PCODE_DATA				0x138128
+#define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 
 #endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5257cfc..8cd1c8b 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -878,8 +878,10 @@
 		intel_init_emon(dev);
 	}
 
-	if (IS_GEN6(dev))
+	if (IS_GEN6(dev)) {
 		gen6_enable_rps(dev_priv);
+		gen6_update_ring_freq(dev_priv);
+	}
 
 	mutex_lock(&dev->struct_mutex);
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 21b6f93..af3e5813 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -24,6 +24,7 @@
  *	Eric Anholt <eric@anholt.net>
  */
 
+#include <linux/cpufreq.h>
 #include <linux/module.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
@@ -1157,12 +1158,15 @@
 
 	reg = TRANSCONF(pipe);
 	val = I915_READ(reg);
-	/*
-	 * make the BPC in transcoder be consistent with
-	 * that in pipeconf reg.
-	 */
-	val &= ~PIPE_BPC_MASK;
-	val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK;
+
+	if (HAS_PCH_IBX(dev_priv->dev)) {
+		/*
+		 * make the BPC in transcoder be consistent with
+		 * that in pipeconf reg.
+		 */
+		val &= ~PIPE_BPC_MASK;
+		val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK;
+	}
 	I915_WRITE(reg, val | TRANS_ENABLE);
 	if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
 		DRM_ERROR("failed to enable transcoder %d\n", pipe);
@@ -1812,14 +1816,10 @@
 	}
 
 	dev_priv->mm.interruptible = false;
-	ret = i915_gem_object_pin(obj, alignment, true);
+	ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
 	if (ret)
 		goto err_interruptible;
 
-	ret = i915_gem_object_set_to_display_plane(obj, pipelined);
-	if (ret)
-		goto err_unpin;
-
 	/* Install a fence for tiled scan-out. Pre-i965 always needs a
 	 * fence, whereas 965+ only requires a fence if using
 	 * framebuffer compression.  For simplicity, we always install
@@ -1841,10 +1841,8 @@
 	return ret;
 }
 
-/* Assume fb object is pinned & idle & fenced and just update base pointers */
-static int
-intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
-			   int x, int y, enum mode_set_atomic state)
+static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			     int x, int y)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1887,7 +1885,7 @@
 		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
 		break;
 	default:
-		DRM_ERROR("Unknown color depth\n");
+		DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
 		return -EINVAL;
 	}
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -1897,10 +1895,6 @@
 			dspcntr &= ~DISPPLANE_TILED;
 	}
 
-	if (HAS_PCH_SPLIT(dev))
-		/* must disable */
-		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
-
 	I915_WRITE(reg, dspcntr);
 
 	Start = obj->gtt_offset;
@@ -1917,6 +1911,99 @@
 		I915_WRITE(DSPADDR(plane), Start + Offset);
 	POSTING_READ(reg);
 
+	return 0;
+}
+
+static int ironlake_update_plane(struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb, int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int plane = intel_crtc->plane;
+	unsigned long Start, Offset;
+	u32 dspcntr;
+	u32 reg;
+
+	switch (plane) {
+	case 0:
+	case 1:
+		break;
+	default:
+		DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+		return -EINVAL;
+	}
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	reg = DSPCNTR(plane);
+	dspcntr = I915_READ(reg);
+	/* Mask out pixel format bits in case we change it */
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	switch (fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (fb->depth != 16)
+			return -EINVAL;
+
+		dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		if (fb->depth == 24)
+			dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		else if (fb->depth == 30)
+			dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
+		else
+			return -EINVAL;
+		break;
+	default:
+		DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	if (obj->tiling_mode != I915_TILING_NONE)
+		dspcntr |= DISPPLANE_TILED;
+	else
+		dspcntr &= ~DISPPLANE_TILED;
+
+	/* must disable */
+	dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
+
+	I915_WRITE(reg, dspcntr);
+
+	Start = obj->gtt_offset;
+	Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8);
+
+	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+		      Start, Offset, x, y, fb->pitch);
+	I915_WRITE(DSPSTRIDE(plane), fb->pitch);
+	I915_WRITE(DSPSURF(plane), Start);
+	I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
+	I915_WRITE(DSPADDR(plane), Offset);
+	POSTING_READ(reg);
+
+	return 0;
+}
+
+/* Assume fb object is pinned & idle & fenced and just update base pointers */
+static int
+intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			   int x, int y, enum mode_set_atomic state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = dev_priv->display.update_plane(crtc, fb, x, y);
+	if (ret)
+		return ret;
+
 	intel_update_fbc(dev);
 	intel_increase_pllclock(crtc);
 
@@ -1971,7 +2058,7 @@
 		 * This should only fail upon a hung GPU, in which case we
 		 * can safely continue.
 		 */
-		ret = i915_gem_object_flush_gpu(obj);
+		ret = i915_gem_object_finish_gpu(obj);
 		(void) ret;
 	}
 
@@ -2622,6 +2709,7 @@
 	/* For PCH DP, enable TRANS_DP_CTL */
 	if (HAS_PCH_CPT(dev) &&
 	    intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
 		temp &= ~(TRANS_DP_PORT_SEL_MASK |
@@ -2629,7 +2717,7 @@
 			  TRANS_DP_BPC_MASK);
 		temp |= (TRANS_DP_OUTPUT_ENABLE |
 			 TRANS_DP_ENH_FRAMING);
-		temp |= TRANS_DP_8BPC;
+		temp |= bpc << 9; /* same format but at 11:9 */
 
 		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
 			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
@@ -4308,6 +4396,133 @@
 	return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
 }
 
+/**
+ * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
+ * @crtc: CRTC structure
+ *
+ * A pipe may be connected to one or more outputs.  Based on the depth of the
+ * attached framebuffer, choose a good color depth to use on the pipe.
+ *
+ * If possible, match the pipe depth to the fb depth.  In some cases, this
+ * isn't ideal, because the connected output supports a lesser or restricted
+ * set of depths.  Resolve that here:
+ *    LVDS typically supports only 6bpc, so clamp down in that case
+ *    HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
+ *    Displays may support a restricted set as well, check EDID and clamp as
+ *      appropriate.
+ *
+ * RETURNS:
+ * Dithering requirement (i.e. false if display bpc and pipe bpc match,
+ * true if they don't match).
+ */
+static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
+					 unsigned int *pipe_bpp)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	unsigned int display_bpc = UINT_MAX, bpc;
+
+	/* Walk the encoders & connectors on this crtc, get min bpc */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
+			unsigned int lvds_bpc;
+
+			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
+			    LVDS_A3_POWER_UP)
+				lvds_bpc = 8;
+			else
+				lvds_bpc = 6;
+
+			if (lvds_bpc < display_bpc) {
+				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
+				display_bpc = lvds_bpc;
+			}
+			continue;
+		}
+
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
+		/* Not one of the known troublemakers, check the EDID */
+		list_for_each_entry(connector, &dev->mode_config.connector_list,
+				    head) {
+			if (connector->encoder != encoder)
+				continue;
+
+			if (connector->display_info.bpc < display_bpc) {
+				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
+				display_bpc = connector->display_info.bpc;
+			}
+		}
+
+		/*
+		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
+		 * through, clamp it down.  (Note: >12bpc will be caught below.)
+		 */
+		if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
+			if (display_bpc > 8 && display_bpc < 12) {
+				DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n");
+				display_bpc = 12;
+			} else {
+				DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n");
+				display_bpc = 8;
+			}
+		}
+	}
+
+	/*
+	 * We could just drive the pipe at the highest bpc all the time and
+	 * enable dithering as needed, but that costs bandwidth.  So choose
+	 * the minimum value that expresses the full color range of the fb but
+	 * also stays within the max display bpc discovered above.
+	 */
+
+	switch (crtc->fb->depth) {
+	case 8:
+		bpc = 8; /* since we go through a colormap */
+		break;
+	case 15:
+	case 16:
+		bpc = 6; /* min is 18bpp */
+		break;
+	case 24:
+		bpc = min((unsigned int)8, display_bpc);
+		break;
+	case 30:
+		bpc = min((unsigned int)10, display_bpc);
+		break;
+	case 48:
+		bpc = min((unsigned int)12, display_bpc);
+		break;
+	default:
+		DRM_DEBUG("unsupported depth, assuming 24 bits\n");
+		bpc = min((unsigned int)8, display_bpc);
+		break;
+	}
+
+	DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n",
+			 bpc, display_bpc);
+
+	*pipe_bpp = bpc * 3;
+
+	return display_bpc != bpc;
+}
+
 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 			      struct drm_display_mode *mode,
 			      struct drm_display_mode *adjusted_mode,
@@ -4720,7 +4935,9 @@
 	struct fdi_m_n m_n = {0};
 	u32 temp;
 	u32 lvds_sync = 0;
-	int target_clock, pixel_multiplier, lane, link_bw, bpp, factor;
+	int target_clock, pixel_multiplier, lane, link_bw, factor;
+	unsigned int pipe_bpp;
+	bool dither;
 
 	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
 		if (encoder->base.crtc != crtc)
@@ -4847,56 +5064,37 @@
 	/* determine panel color depth */
 	temp = I915_READ(PIPECONF(pipe));
 	temp &= ~PIPE_BPC_MASK;
-	if (is_lvds) {
-		/* the BPC will be 6 if it is 18-bit LVDS panel */
-		if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
-			temp |= PIPE_8BPC;
-		else
-			temp |= PIPE_6BPC;
-	} else if (has_edp_encoder) {
-		switch (dev_priv->edp.bpp/3) {
-		case 8:
-			temp |= PIPE_8BPC;
-			break;
-		case 10:
-			temp |= PIPE_10BPC;
-			break;
-		case 6:
-			temp |= PIPE_6BPC;
-			break;
-		case 12:
-			temp |= PIPE_12BPC;
-			break;
-		}
-	} else
+	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp);
+	switch (pipe_bpp) {
+	case 18:
+		temp |= PIPE_6BPC;
+		break;
+	case 24:
 		temp |= PIPE_8BPC;
-	I915_WRITE(PIPECONF(pipe), temp);
-
-	switch (temp & PIPE_BPC_MASK) {
-	case PIPE_8BPC:
-		bpp = 24;
 		break;
-	case PIPE_10BPC:
-		bpp = 30;
+	case 30:
+		temp |= PIPE_10BPC;
 		break;
-	case PIPE_6BPC:
-		bpp = 18;
-		break;
-	case PIPE_12BPC:
-		bpp = 36;
+	case 36:
+		temp |= PIPE_12BPC;
 		break;
 	default:
-		DRM_ERROR("unknown pipe bpc value\n");
-		bpp = 24;
+		WARN(1, "intel_choose_pipe_bpp returned invalid value\n");
+		temp |= PIPE_8BPC;
+		pipe_bpp = 24;
+		break;
 	}
 
+	intel_crtc->bpp = pipe_bpp;
+	I915_WRITE(PIPECONF(pipe), temp);
+
 	if (!lane) {
 		/*
 		 * Account for spread spectrum to avoid
 		 * oversubscribing the link. Max center spread
 		 * is 2.5%; use 5% for safety's sake.
 		 */
-		u32 bps = target_clock * bpp * 21 / 20;
+		u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
 		lane = bps / (link_bw * 8) + 1;
 	}
 
@@ -4904,7 +5102,8 @@
 
 	if (pixel_multiplier > 1)
 		link_bw *= pixel_multiplier;
-	ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+	ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
+			     &m_n);
 
 	/* Ironlake: try to setup display ref clock before DPLL
 	 * enabling. This is only under driver's control after
@@ -5107,14 +5306,12 @@
 		I915_WRITE(PCH_LVDS, temp);
 	}
 
-	/* set the dithering flag and clear for anything other than a panel. */
 	pipeconf &= ~PIPECONF_DITHER_EN;
 	pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
-	if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
+	if ((is_lvds && dev_priv->lvds_dither) || dither) {
 		pipeconf |= PIPECONF_DITHER_EN;
 		pipeconf |= PIPECONF_DITHER_TYPE_ST1;
 	}
-
 	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 	} else {
@@ -5434,21 +5631,15 @@
 			goto fail_locked;
 		}
 
-		ret = i915_gem_object_pin(obj, PAGE_SIZE, true);
-		if (ret) {
-			DRM_ERROR("failed to pin cursor bo\n");
-			goto fail_locked;
-		}
-
-		ret = i915_gem_object_set_to_gtt_domain(obj, 0);
+		ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
 		if (ret) {
 			DRM_ERROR("failed to move cursor bo into the GTT\n");
-			goto fail_unpin;
+			goto fail_locked;
 		}
 
 		ret = i915_gem_object_put_fence(obj);
 		if (ret) {
-			DRM_ERROR("failed to move cursor bo into the GTT\n");
+			DRM_ERROR("failed to release fence for cursor");
 			goto fail_unpin;
 		}
 
@@ -6643,6 +6834,7 @@
 
 	intel_crtc_reset(&intel_crtc->base);
 	intel_crtc->active = true; /* force the pipe off on setup_init_config */
+	intel_crtc->bpp = 24; /* default for pre-Ironlake */
 
 	if (HAS_PCH_SPLIT(dev)) {
 		intel_helper_funcs.prepare = ironlake_crtc_prepare;
@@ -6869,6 +7061,11 @@
 	switch (mode_cmd->bpp) {
 	case 8:
 	case 16:
+		/* Only pre-ILK can handle 5:5:5 */
+		if (mode_cmd->depth == 15 && !HAS_PCH_SPLIT(dev))
+			return -EINVAL;
+		break;
+
 	case 24:
 	case 32:
 		break;
@@ -7283,6 +7480,59 @@
 	mutex_unlock(&dev_priv->dev->struct_mutex);
 }
 
+void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
+{
+	int min_freq = 15;
+	int gpu_freq, ia_freq, max_ia_freq;
+	int scaling_factor = 180;
+
+	max_ia_freq = cpufreq_quick_get_max(0);
+	/*
+	 * Default to measured freq if none found, PCU will ensure we don't go
+	 * over
+	 */
+	if (!max_ia_freq)
+		max_ia_freq = tsc_khz;
+
+	/* Convert from kHz to MHz */
+	max_ia_freq /= 1000;
+
+	mutex_lock(&dev_priv->dev->struct_mutex);
+
+	/*
+	 * For each potential GPU frequency, load a ring frequency we'd like
+	 * to use for memory access.  We do this by specifying the IA frequency
+	 * the PCU should use as a reference to determine the ring frequency.
+	 */
+	for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
+	     gpu_freq--) {
+		int diff = dev_priv->max_delay - gpu_freq;
+
+		/*
+		 * For GPU frequencies less than 750MHz, just use the lowest
+		 * ring freq.
+		 */
+		if (gpu_freq < min_freq)
+			ia_freq = 800;
+		else
+			ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
+		ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
+
+		I915_WRITE(GEN6_PCODE_DATA,
+			   (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
+			   gpu_freq);
+		I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
+			   GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
+		if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
+			      GEN6_PCODE_READY) == 0, 10)) {
+			DRM_ERROR("pcode write of freq table timed out\n");
+			continue;
+		}
+	}
+
+	mutex_unlock(&dev_priv->dev->struct_mutex);
+}
+
 static void ironlake_init_clock_gating(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -7639,9 +7889,11 @@
 	if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->display.dpms = ironlake_crtc_dpms;
 		dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
+		dev_priv->display.update_plane = ironlake_update_plane;
 	} else {
 		dev_priv->display.dpms = i9xx_crtc_dpms;
 		dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+		dev_priv->display.update_plane = i9xx_update_plane;
 	}
 
 	if (I915_HAS_FBC(dev)) {
@@ -7926,8 +8178,10 @@
 		intel_init_emon(dev);
 	}
 
-	if (IS_GEN6(dev))
+	if (IS_GEN6(dev) || IS_GEN7(dev)) {
 		gen6_enable_rps(dev_priv);
+		gen6_update_ring_freq(dev_priv);
+	}
 
 	INIT_WORK(&dev_priv->idle_work, intel_idle_update);
 	setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
@@ -7968,7 +8222,7 @@
 
 	if (IS_IRONLAKE_M(dev))
 		ironlake_disable_drps(dev);
-	if (IS_GEN6(dev))
+	if (IS_GEN6(dev) || IS_GEN7(dev))
 		gen6_disable_rps(dev);
 
 	if (IS_IRONLAKE_M(dev))
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e2aced6..f797fb5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -178,12 +178,14 @@
 static int
 intel_dp_link_required(struct drm_device *dev, struct intel_dp *intel_dp, int pixel_clock)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = intel_dp->base.base.crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int bpp = 24;
 
-	if (is_edp(intel_dp))
-		return (pixel_clock * dev_priv->edp.bpp + 7) / 8;
-	else
-		return pixel_clock * 3;
+	if (intel_crtc)
+		bpp = intel_crtc->bpp;
+
+	return (pixel_clock * bpp + 7) / 8;
 }
 
 static int
@@ -681,7 +683,7 @@
 	struct drm_encoder *encoder;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int lane_count = 4, bpp = 24;
+	int lane_count = 4;
 	struct intel_dp_m_n m_n;
 	int pipe = intel_crtc->pipe;
 
@@ -700,7 +702,6 @@
 			break;
 		} else if (is_edp(intel_dp)) {
 			lane_count = dev_priv->edp.lanes;
-			bpp = dev_priv->edp.bpp;
 			break;
 		}
 	}
@@ -710,7 +711,7 @@
 	 * the number of bytes_per_pixel post-LUT, which we always
 	 * set up for 8-bits of R/G/B, or 3 bytes total.
 	 */
-	intel_dp_compute_m_n(bpp, lane_count,
+	intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
 			     mode->clock, adjusted_mode->clock, &m_n);
 
 	if (HAS_PCH_SPLIT(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9ffa61e..7ec48d8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -170,6 +170,7 @@
 	int16_t cursor_x, cursor_y;
 	int16_t cursor_width, cursor_height;
 	bool cursor_visible;
+	unsigned int bpp;
 };
 
 #define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
@@ -317,6 +318,7 @@
 extern void ironlake_enable_drps(struct drm_device *dev);
 extern void ironlake_disable_drps(struct drm_device *dev);
 extern void gen6_enable_rps(struct drm_i915_private *dev_priv);
+extern void gen6_update_ring_freq(struct drm_i915_private *dev_priv);
 extern void gen6_disable_rps(struct drm_device *dev);
 extern void intel_init_emon(struct drm_device *dev);
 
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index aa0a8e8..1ed8e69 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -124,12 +124,18 @@
 	u32 sdvox;
 
 	sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE;
-	sdvox |= intel_hdmi->color_range;
+	if (!HAS_PCH_SPLIT(dev))
+		sdvox |= intel_hdmi->color_range;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 		sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 		sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
 
+	if (intel_crtc->bpp > 24)
+		sdvox |= COLOR_FORMAT_12bpc;
+	else
+		sdvox |= COLOR_FORMAT_8bpc;
+
 	/* Required on CPT */
 	if (intel_hdmi->has_hdmi_sink && HAS_PCH_CPT(dev))
 		sdvox |= HDMI_MODE_SELECT;
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index 9e2959b..d360380 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -773,14 +773,10 @@
 	if (ret != 0)
 		return ret;
 
-	ret = i915_gem_object_pin(new_bo, PAGE_SIZE, true);
+	ret = i915_gem_object_pin_to_display_plane(new_bo, 0, NULL);
 	if (ret != 0)
 		return ret;
 
-	ret = i915_gem_object_set_to_gtt_domain(new_bo, 0);
-	if (ret != 0)
-		goto out_unpin;
-
 	ret = i915_gem_object_put_fence(new_bo);
 	if (ret)
 		goto out_unpin;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 95c4b14..e961568 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -236,7 +236,8 @@
 		ret = -ENOMEM;
 		goto err;
 	}
-	obj->cache_level = I915_CACHE_LLC;
+
+	i915_gem_object_set_cache_level(obj, I915_CACHE_LLC);
 
 	ret = i915_gem_object_pin(obj, 4096, true);
 	if (ret)
@@ -776,7 +777,8 @@
 		ret = -ENOMEM;
 		goto err;
 	}
-	obj->cache_level = I915_CACHE_LLC;
+
+	i915_gem_object_set_cache_level(obj, I915_CACHE_LLC);
 
 	ret = i915_gem_object_pin(obj, 4096, true);
 	if (ret != 0) {
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 11be48e..6216115 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -324,11 +324,16 @@
 /* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
 #ifdef CONFIG_CPU_FREQ
 unsigned int cpufreq_quick_get(unsigned int cpu);
+unsigned int cpufreq_quick_get_max(unsigned int cpu);
 #else
 static inline unsigned int cpufreq_quick_get(unsigned int cpu)
 {
 	return 0;
 }
+static inline unsigned int cpufreq_quick_get_max(unsigned int cpu)
+{
+	return 0;
+}
 #endif