libata, libsas: kill pm_result and related cleanup
Tejun says:
"At least for libata, worrying about suspend/resume failures don't make
whole lot of sense. If suspend failed, just proceed with suspend. If
the device can't be woken up afterwards, that's that. There isn't
anything we could have done differently anyway. The same for resume, if
spinup fails, the device is dud and the following commands will invoke
EH actions and will eventually fail. Again, there really isn't any
*choice* to make. Just making sure the errors are handled gracefully
(ie. don't crash) and the following commands are handled correctly
should be enough."
The only libata user that actually cares about the result from a suspend
operation is libsas. However, it only cares about whether queuing a new
operation collides with an in-flight one. All libsas does with the
error is retry, but we can just let libata wait for the previous
operation before continuing.
Other cleanups include:
1/ Unifying all ata port pm operations on an ata_port_pm_ prefix
2/ Marking all ata port pm helper routines as returning void, only
ata_port_pm_ entry points need to fake a 0 return value.
3/ Killing ata_port_{suspend|resume}_common() in favor of calling
ata_port_request_pm() directly
4/ Killing the wrappers that just do a to_ata_port() conversion
5/ Clearly marking the entry points that do async operations with an
_async suffix.
Reference: http://marc.info/?l=linux-scsi&m=138995409532286&w=2
Cc: Phillip Susi <psusi@ubuntu.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1a3dbd1..66110ed 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5351,22 +5351,17 @@
}
#ifdef CONFIG_PM
-static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
- unsigned int action, unsigned int ehi_flags,
- int *async)
+static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
+ unsigned int action, unsigned int ehi_flags,
+ bool async)
{
struct ata_link *link;
unsigned long flags;
- int rc = 0;
/* Previous resume operation might still be in
* progress. Wait for PM_PENDING to clear.
*/
if (ap->pflags & ATA_PFLAG_PM_PENDING) {
- if (async) {
- *async = -EAGAIN;
- return 0;
- }
ata_port_wait_eh(ap);
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
}
@@ -5375,11 +5370,6 @@
spin_lock_irqsave(ap->lock, flags);
ap->pm_mesg = mesg;
- if (async)
- ap->pm_result = async;
- else
- ap->pm_result = &rc;
-
ap->pflags |= ATA_PFLAG_PM_PENDING;
ata_for_each_link(link, ap, HOST_FIRST) {
link->eh_info.action |= action;
@@ -5390,87 +5380,81 @@
spin_unlock_irqrestore(ap->lock, flags);
- /* wait and check result */
if (!async) {
ata_port_wait_eh(ap);
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
}
-
- return rc;
}
-static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async)
+/*
+ * On some hardware, device fails to respond after spun down for suspend. As
+ * the device won't be used before being resumed, we don't need to touch the
+ * device. Ask EH to skip the usual stuff and proceed directly to suspend.
+ *
+ * http://thread.gmane.org/gmane.linux.ide/46764
+ */
+static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET
+ | ATA_EHI_NO_AUTOPSY
+ | ATA_EHI_NO_RECOVERY;
+
+static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
- /*
- * On some hardware, device fails to respond after spun down
- * for suspend. As the device won't be used before being
- * resumed, we don't need to touch the device. Ask EH to skip
- * the usual stuff and proceed directly to suspend.
- *
- * http://thread.gmane.org/gmane.linux.ide/46764
- */
- unsigned int ehi_flags = ATA_EHI_QUIET | ATA_EHI_NO_AUTOPSY |
- ATA_EHI_NO_RECOVERY;
- return ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
+ ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false);
}
-static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
+static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg)
+{
+ ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true);
+}
+
+static int ata_port_pm_suspend(struct device *dev)
{
struct ata_port *ap = to_ata_port(dev);
- return __ata_port_suspend_common(ap, mesg, NULL);
-}
-
-static int ata_port_suspend(struct device *dev)
-{
if (pm_runtime_suspended(dev))
return 0;
- return ata_port_suspend_common(dev, PMSG_SUSPEND);
+ ata_port_suspend(ap, PMSG_SUSPEND);
+ return 0;
}
-static int ata_port_do_freeze(struct device *dev)
-{
- if (pm_runtime_suspended(dev))
- return 0;
-
- return ata_port_suspend_common(dev, PMSG_FREEZE);
-}
-
-static int ata_port_poweroff(struct device *dev)
-{
- return ata_port_suspend_common(dev, PMSG_HIBERNATE);
-}
-
-static int __ata_port_resume_common(struct ata_port *ap, pm_message_t mesg,
- int *async)
-{
- int rc;
-
- rc = ata_port_request_pm(ap, mesg, ATA_EH_RESET,
- ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, async);
- return rc;
-}
-
-static int ata_port_resume_common(struct device *dev, pm_message_t mesg)
+static int ata_port_pm_freeze(struct device *dev)
{
struct ata_port *ap = to_ata_port(dev);
- return __ata_port_resume_common(ap, mesg, NULL);
+ if (pm_runtime_suspended(dev))
+ return 0;
+
+ ata_port_suspend(ap, PMSG_FREEZE);
+ return 0;
}
-static int ata_port_resume(struct device *dev)
+static int ata_port_pm_poweroff(struct device *dev)
{
- int rc;
+ ata_port_suspend(to_ata_port(dev), PMSG_HIBERNATE);
+ return 0;
+}
- rc = ata_port_resume_common(dev, PMSG_RESUME);
- if (!rc) {
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- }
+static const unsigned int ata_port_resume_ehi = ATA_EHI_NO_AUTOPSY
+ | ATA_EHI_QUIET;
- return rc;
+static void ata_port_resume(struct ata_port *ap, pm_message_t mesg)
+{
+ ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, false);
+}
+
+static void ata_port_resume_async(struct ata_port *ap, pm_message_t mesg)
+{
+ ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, true);
+}
+
+static int ata_port_pm_resume(struct device *dev)
+{
+ ata_port_resume(to_ata_port(dev), PMSG_RESUME);
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ return 0;
}
/*
@@ -5499,21 +5483,23 @@
static int ata_port_runtime_suspend(struct device *dev)
{
- return ata_port_suspend_common(dev, PMSG_AUTO_SUSPEND);
+ ata_port_suspend(to_ata_port(dev), PMSG_AUTO_SUSPEND);
+ return 0;
}
static int ata_port_runtime_resume(struct device *dev)
{
- return ata_port_resume_common(dev, PMSG_AUTO_RESUME);
+ ata_port_resume(to_ata_port(dev), PMSG_AUTO_RESUME);
+ return 0;
}
static const struct dev_pm_ops ata_port_pm_ops = {
- .suspend = ata_port_suspend,
- .resume = ata_port_resume,
- .freeze = ata_port_do_freeze,
- .thaw = ata_port_resume,
- .poweroff = ata_port_poweroff,
- .restore = ata_port_resume,
+ .suspend = ata_port_pm_suspend,
+ .resume = ata_port_pm_resume,
+ .freeze = ata_port_pm_freeze,
+ .thaw = ata_port_pm_resume,
+ .poweroff = ata_port_pm_poweroff,
+ .restore = ata_port_pm_resume,
.runtime_suspend = ata_port_runtime_suspend,
.runtime_resume = ata_port_runtime_resume,
@@ -5525,18 +5511,17 @@
* level. sas suspend/resume is async to allow parallel port recovery
* since sas has multiple ata_port instances per Scsi_Host.
*/
-int ata_sas_port_async_suspend(struct ata_port *ap, int *async)
+void ata_sas_port_suspend(struct ata_port *ap)
{
- return __ata_port_suspend_common(ap, PMSG_SUSPEND, async);
+ ata_port_suspend_async(ap, PMSG_SUSPEND);
}
-EXPORT_SYMBOL_GPL(ata_sas_port_async_suspend);
+EXPORT_SYMBOL_GPL(ata_sas_port_suspend);
-int ata_sas_port_async_resume(struct ata_port *ap, int *async)
+void ata_sas_port_resume(struct ata_port *ap)
{
- return __ata_port_resume_common(ap, PMSG_RESUME, async);
+ ata_port_resume_async(ap, PMSG_RESUME);
}
-EXPORT_SYMBOL_GPL(ata_sas_port_async_resume);
-
+EXPORT_SYMBOL_GPL(ata_sas_port_resume);
/**
* ata_host_suspend - suspend host