ARM: ux500: core U9540 support
This adds support for the U9540 variant of the U8500 series. This
is an application processor without internal modem. This is the
most basic part with ASIC ID, CPU-related fixes, IRQ list, register
ranges, timer, UART, and L2 cache setup. This is based on a patch
by Michel Jaouen which was rewritten to fit with the latest 3.3
kernel.
ChangeLog v1->v2: deleted the irqs-db9540.h file since we expect to
migrate to using Device Tree for getting the IRQs to devices.
ChangeLog v2->v3: introduced a fixed virtual offset for the ROM
as suggested by Arnd Bergmann.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastien Pasdeloup <sebastien.pasdeloup-nonst@stericsson.com>
Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 5af36aa..b29a788 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -102,7 +102,7 @@
struct i2c_adapter *i2c0;
int ret;
- if (!cpu_is_u8500())
+ if (!cpu_is_u8500_family())
return -ENODEV;
if (uib) {
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 77a75ed..677bb76 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -36,9 +36,11 @@
static int __init ux500_l2x0_init(void)
{
+ u32 aux_val = 0x3e000000;
+
if (cpu_is_u5500())
l2x0_base = __io_address(U5500_L2CC_BASE);
- else if (cpu_is_u8500())
+ else if (cpu_is_u8500_family())
l2x0_base = __io_address(U8500_L2CC_BASE);
else
ux500_unknown_soc();
@@ -46,11 +48,19 @@
/* Unlock before init */
ux500_l2x0_unlock();
+ /* DB9540's L2 has 128KB way size */
+ if (cpu_is_u9540())
+ /* 128KB way size */
+ aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+ else
+ /* 64KB way size */
+ aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+
/* 64KB way size, 8 way associativity, force WA */
if (of_have_populated_dt())
- l2x0_of_init(0x3e060000, 0xc0000fff);
+ l2x0_of_init(aux_val, 0xc0000fff);
else
- l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+ l2x0_init(l2x0_base, aux_val, 0xc0000fff);
/*
* We can't disable l2 as we are in non secure mode, currently
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index ec35f0a..cc87f77 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -151,7 +151,7 @@
if (cpu_is_u5500())
addr = __io_address(U5500_PRCMU_BASE);
- else if (cpu_is_u8500())
+ else if (cpu_is_u8500_family())
addr = __io_address(U8500_PRCMU_BASE);
else
ux500_unknown_soc();
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 9bd8163..0bdcdd9 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -34,8 +34,8 @@
__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
};
-
-static struct map_desc u8500_io_desc[] __initdata = {
+/* U8500 and U9540 common io_desc */
+static struct map_desc u8500_common_io_desc[] __initdata = {
/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
@@ -66,7 +66,7 @@
ux500_map_io();
- iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+ iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
}
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d11f389..857e481 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -43,7 +43,7 @@
if (cpu_is_u5500()) {
dist_base = __io_address(U5500_GIC_DIST_BASE);
cpu_base = __io_address(U5500_GIC_CPU_BASE);
- } else if (cpu_is_u8500()) {
+ } else if (cpu_is_u8500_family()) {
dist_base = __io_address(U8500_GIC_DIST_BASE);
cpu_base = __io_address(U8500_GIC_CPU_BASE);
} else
@@ -62,7 +62,7 @@
*/
if (cpu_is_u5500())
db5500_prcmu_early_init();
- if (cpu_is_u8500())
+ if (cpu_is_u8500_family())
db8500_prcmu_early_init();
clk_init();
}
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index 15a0f63..d157992 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -23,7 +23,7 @@
{
phys_addr_t base = addr & ~0xfff;
struct map_desc desc = {
- .virtual = IO_ADDRESS(base),
+ .virtual = UX500_VIRT_ROM,
.pfn = __phys_to_pfn(base),
.length = SZ_16K,
.type = MT_DEVICE,
@@ -35,7 +35,7 @@
local_flush_tlb_all();
flush_cache_all();
- return readl(__io_address(addr));
+ return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff)));
}
static void ux500_print_soc_info(unsigned int asicid)
@@ -67,6 +67,7 @@
* DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
* DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2
* DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
+ * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx
*/
void __init ux500_map_io(void)
@@ -91,6 +92,10 @@
/* DB5500v1 */
addr = 0x9001FFF4;
break;
+
+ case 0x413fc090: /* DB9540 */
+ addr = 0xFFFFDBF4;
+ break;
}
if (addr)
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 9ec20b9..1530d49 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -41,6 +41,10 @@
/* ASIC ID is at 0xbf4 offset within this region */
#define U8500_ASIC_ID_BASE 0x9001D000
+#define U9540_BOOT_ROM_BASE 0xFFFE0000
+/* ASIC ID is at 0xbf4 offset within this region */
+#define U9540_ASIC_ID_BASE 0xFFFFD000
+
#define U8500_PER6_BASE 0xa03c0000
#define U8500_PER7_BASE 0xa03d0000
#define U8500_PER5_BASE 0xa03e0000
@@ -96,7 +100,9 @@
#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
+#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000)
#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
+#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000)
#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index f846989..8361657 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -17,6 +17,8 @@
*/
#define U8500_IO_VIRTUAL 0xf0000000
#define U8500_IO_PHYSICAL 0xa0000000
+/* This is where we map in the ROM to check ASIC IDs */
+#define UX500_VIRT_ROM 0xf0000000
/* This macro is used in assembly, so no cast */
#define IO_ADDRESS(x) \
@@ -24,6 +26,7 @@
/* typesafe io address */
#define __io_address(n) IOMEM(IO_ADDRESS(n))
+
/* Used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index 833d6a6..c6e2db9 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -41,6 +41,16 @@
return dbx500_partnumber() == 0x8500;
}
+static inline bool __attribute_const__ cpu_is_u9540(void)
+{
+ return dbx500_partnumber() == 0x9540;
+}
+
+static inline bool cpu_is_u8500_family(void)
+{
+ return cpu_is_u8500() || cpu_is_u9540();
+}
+
static inline bool __attribute_const__ cpu_is_u5500(void)
{
return dbx500_partnumber() == 0x5500;
@@ -111,7 +121,12 @@
static inline bool cpu_is_u8500v20_or_later(void)
{
- return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+ /*
+ * U9540 has so much in common with U8500 that is is considered a
+ * U8500 variant.
+ */
+ return cpu_is_u9540() ||
+ (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
}
static inline bool ux500_is_svp(void)
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index c23a6b5..7da9ec5 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -24,7 +24,7 @@
*/
#define IRQ_MTU0 (IRQ_SHPI_START + 4)
-#define DBX500_NR_INTERNAL_IRQS 160
+#define DBX500_NR_INTERNAL_IRQS 166
/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO 288
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index eff5842..f499a07 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -50,7 +50,7 @@
{
if (cpu_is_u5500())
return __io_address(U5500_SCU_BASE);
- else if (cpu_is_u8500())
+ else if (cpu_is_u8500_family())
return __io_address(U8500_SCU_BASE);
else
ux500_unknown_soc();
@@ -122,7 +122,7 @@
if (cpu_is_u5500())
backupram = __io_address(U5500_BACKUPRAM0_BASE);
- else if (cpu_is_u8500())
+ else if (cpu_is_u8500_family())
backupram = __io_address(U8500_BACKUPRAM0_BASE);
else
ux500_unknown_soc();
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index d37df98..3bfbfdf 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -51,7 +51,7 @@
if (cpu_is_u5500()) {
mtu_timer_base = __io_address(U5500_MTU0_BASE);
prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
- } else if (cpu_is_u8500()) {
+ } else if (cpu_is_u8500_family()) {
mtu_timer_base = __io_address(U8500_MTU0_BASE);
prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
} else {
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 0bf1b89..74b830b 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -161,7 +161,7 @@
static int __init db8500_cpufreq_register(void)
{
- if (!cpu_is_u8500v20_or_later())
+ if (!cpu_is_u8500_family())
return -ENODEV;
pr_info("cpufreq for DB8500 started\n");