x86: ioapic: Add OF bindings for IO_APIC
ioapic_xlate provides a translation from the information in device tree
to ioapic related informations. This includes
- obtaining hw irq which is the vector number "=> pin number + gsi"
- obtaining type (level/edge/..)
- programming this information into ioapic
ioapic_add_ofnode adds an irq_domain based on informations from the device
tree. This information (irq_domain) is required in order to map a device to
its proper interrupt controller.
[ tglx: Adapted to the io_apic changes, which let us move that whole code
to devicetree.c ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-10-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
index 8fcd519..ae50131 100644
--- a/arch/x86/include/asm/prom.h
+++ b/arch/x86/include/asm/prom.h
@@ -27,6 +27,7 @@
extern int of_ioapic;
extern u64 initial_dtb;
extern void add_dtb(u64 data);
+extern void x86_add_irq_domains(void);
void x86_dtb_find_config(void);
void x86_dtb_get_config(unsigned int unused);
void add_interrupt_host(struct irq_domain *ih);
@@ -44,6 +45,7 @@
#else
static inline void add_dtb(u64 data) { }
+static inline void x86_add_irq_domains(void) { }
static inline void x86_of_pci_init(void) { }
#define x86_dtb_find_config x86_init_noop
#define x86_dtb_get_config x86_init_uint_noop
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 0bc83bf..2d65897 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -320,3 +320,107 @@
dtb_setup_hpet();
dtb_apic_setup();
}
+
+#ifdef CONFIG_X86_IO_APIC
+
+struct of_ioapic_type {
+ u32 out_type;
+ u32 trigger;
+ u32 polarity;
+};
+
+static struct of_ioapic_type of_ioapic_type[] =
+{
+ {
+ .out_type = IRQ_TYPE_EDGE_RISING,
+ .trigger = IOAPIC_EDGE,
+ .polarity = 1,
+ },
+ {
+ .out_type = IRQ_TYPE_LEVEL_LOW,
+ .trigger = IOAPIC_LEVEL,
+ .polarity = 0,
+ },
+ {
+ .out_type = IRQ_TYPE_LEVEL_HIGH,
+ .trigger = IOAPIC_LEVEL,
+ .polarity = 1,
+ },
+ {
+ .out_type = IRQ_TYPE_EDGE_FALLING,
+ .trigger = IOAPIC_EDGE,
+ .polarity = 0,
+ },
+};
+
+static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize,
+ u32 *out_hwirq, u32 *out_type)
+{
+ struct io_apic_irq_attr attr;
+ struct of_ioapic_type *it;
+ u32 line, idx, type;
+
+ if (intsize < 2)
+ return -EINVAL;
+
+ line = *intspec;
+ idx = (u32) id->priv;
+ *out_hwirq = line + mp_gsi_routing[idx].gsi_base;
+
+ intspec++;
+ type = *intspec;
+
+ if (type >= ARRAY_SIZE(of_ioapic_type))
+ return -EINVAL;
+
+ it = of_ioapic_type + type;
+ *out_type = it->out_type;
+
+ set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity);
+
+ return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr);
+}
+
+static void __init ioapic_add_ofnode(struct device_node *np)
+{
+ struct resource r;
+ int i, ret;
+
+ ret = of_address_to_resource(np, 0, &r);
+ if (ret) {
+ printk(KERN_ERR "Failed to obtain address for %s\n",
+ np->full_name);
+ return;
+ }
+
+ for (i = 0; i < nr_ioapics; i++) {
+ if (r.start == mp_ioapics[i].apicaddr) {
+ struct irq_domain *id;
+
+ id = kzalloc(sizeof(*id), GFP_KERNEL);
+ BUG_ON(!id);
+ id->controller = np;
+ id->xlate = ioapic_xlate;
+ id->priv = (void *)i;
+ add_interrupt_host(id);
+ return;
+ }
+ }
+ printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name);
+}
+
+void __init x86_add_irq_domains(void)
+{
+ struct device_node *dp;
+
+ if (!initial_boot_params)
+ return;
+
+ for_each_node_with_property(dp, "interrupt-controller") {
+ if (of_device_is_compatible(dp, "intel,ce4100-ioapic"))
+ ioapic_add_ofnode(dp);
+ }
+}
+#else
+void __init x86_add_irq_domains(void) { }
+#endif
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 4cadf86..9f76f89 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -119,6 +119,12 @@
int i;
/*
+ * We probably need a better place for this, but it works for
+ * now ...
+ */
+ x86_add_irq_domains();
+
+ /*
* On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
* If these IRQ's are handled by legacy interrupt-controllers like PIC,
* then this configuration will likely be static after the boot. If