blob: 60f3f86904fba1db781ef9c4db2fcad957652861 [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
#ifndef __iwl_fw_file_h__
#define __iwl_fw_file_h__
#include <linux/netdevice.h>
#include <linux/nl80211.h>
/* v1/v2 uCode file layout */
struct iwl_ucode_header {
__le32 ver; /* major/minor/API/serial */
union {
struct {
__le32 inst_size; /* bytes of runtime code */
__le32 data_size; /* bytes of runtime data */
__le32 init_size; /* bytes of init code */
__le32 init_data_size; /* bytes of init data */
__le32 boot_size; /* bytes of bootstrap code */
u8 data[0]; /* in same order as sizes */
} v1;
struct {
__le32 build; /* build number */
__le32 inst_size; /* bytes of runtime code */
__le32 data_size; /* bytes of runtime data */
__le32 init_size; /* bytes of init code */
__le32 init_data_size; /* bytes of init data */
__le32 boot_size; /* bytes of bootstrap code */
u8 data[0]; /* in same order as sizes */
} v2;
} u;
};
/*
* new TLV uCode file layout
*
* The new TLV file format contains TLVs, that each specify
* some piece of data.
*/
enum iwl_ucode_tlv_type {
IWL_UCODE_TLV_INVALID = 0, /* unused */
IWL_UCODE_TLV_INST = 1,
IWL_UCODE_TLV_DATA = 2,
IWL_UCODE_TLV_INIT = 3,
IWL_UCODE_TLV_INIT_DATA = 4,
IWL_UCODE_TLV_BOOT = 5,
IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */
IWL_UCODE_TLV_PAN = 7,
IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8,
IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9,
IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10,
IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11,
IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12,
IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13,
IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14,
IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
IWL_UCODE_TLV_WOWLAN_INST = 16,
IWL_UCODE_TLV_WOWLAN_DATA = 17,
IWL_UCODE_TLV_FLAGS = 18,
IWL_UCODE_TLV_SEC_RT = 19,
IWL_UCODE_TLV_SEC_INIT = 20,
IWL_UCODE_TLV_SEC_WOWLAN = 21,
IWL_UCODE_TLV_DEF_CALIB = 22,
IWL_UCODE_TLV_PHY_SKU = 23,
IWL_UCODE_TLV_SECURE_SEC_RT = 24,
IWL_UCODE_TLV_SECURE_SEC_INIT = 25,
IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
IWL_UCODE_TLV_NUM_OF_CPU = 27,
IWL_UCODE_TLV_CSCHEME = 28,
IWL_UCODE_TLV_API_CHANGES_SET = 29,
IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30,
IWL_UCODE_TLV_N_SCAN_CHANNELS = 31,
IWL_UCODE_TLV_SEC_RT_USNIFFER = 34,
IWL_UCODE_TLV_SDIO_ADMA_ADDR = 35,
IWL_UCODE_TLV_FW_VERSION = 36,
IWL_UCODE_TLV_FW_DBG_DEST = 38,
IWL_UCODE_TLV_FW_DBG_CONF = 39,
IWL_UCODE_TLV_FW_DBG_TRIGGER = 40,
};
struct iwl_ucode_tlv {
__le32 type; /* see above */
__le32 length; /* not including type/length fields */
u8 data[0];
};
#define IWL_TLV_UCODE_MAGIC 0x0a4c5749
#define FW_VER_HUMAN_READABLE_SZ 64
struct iwl_tlv_ucode_header {
/*
* The TLV style ucode header is distinguished from
* the v1/v2 style header by first four bytes being
* zero, as such is an invalid combination of
* major/minor/API/serial versions.
*/
__le32 zero;
__le32 magic;
u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
/* major/minor/API/serial or major in new format */
__le32 ver;
__le32 build;
__le64 ignore;
/*
* The data contained herein has a TLV layout,
* see above for the TLV header and types.
* Note that each TLV is padded to a length
* that is a multiple of 4 for alignment.
*/
u8 data[0];
};
/*
* ucode TLVs
*
* ability to get extension for: flags & capabilities from ucode binaries files
*/
struct iwl_ucode_api {
__le32 api_index;
__le32 api_flags;
} __packed;
struct iwl_ucode_capa {
__le32 api_index;
__le32 api_capa;
} __packed;
/**
* enum iwl_ucode_tlv_flag - ucode API flags
* @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
* was a separate TLV but moved here to save space.
* @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
* treats good CRC threshold as a boolean
* @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
* @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
* @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
* @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
* @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
* offload profile config command.
* @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
* (rather than two) IPv6 addresses
* @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
* from the probe request template.
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
* @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
* @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
* P2P client interfaces simultaneously if they are in different bindings.
* @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
* P2P client interfaces simultaneously if they are in same bindings.
* @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
* @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
* @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
* @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
* @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
*/
enum iwl_ucode_tlv_flag {
IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21),
IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22),
IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23),
IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25),
IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30),
};
/**
* enum iwl_ucode_tlv_api - ucode api
* @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
* @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
* longer than the passive one, which is essential for fragmented scan.
* @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
* IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR
* @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command,
* regardless of the band or the number of the probes. FW will calculate
* the actual dwell time.
* @IWL_UCODE_TLV_API_SCD_CFG: This firmware can configure the scheduler
* through the dedicated host command.
* @IWL_UCODE_TLV_API_SINGLE_SCAN_EBS: EBS is supported for single scans too.
* @IWL_UCODE_TLV_API_ASYNC_DTM: Async temperature notifications are supported.
* @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
* @IWL_UCODE_TLV_API_STATS_V10: uCode supports/uses statistics API version 10
* @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
*/
enum iwl_ucode_tlv_api {
IWL_UCODE_TLV_API_BT_COEX_SPLIT = BIT(3),
IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8),
IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = BIT(9),
IWL_UCODE_TLV_API_HDC_PHASE_0 = BIT(10),
IWL_UCODE_TLV_API_BASIC_DWELL = BIT(13),
IWL_UCODE_TLV_API_SCD_CFG = BIT(15),
IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = BIT(16),
IWL_UCODE_TLV_API_ASYNC_DTM = BIT(17),
IWL_UCODE_TLV_API_LQ_SS_PARAMS = BIT(18),
IWL_UCODE_TLV_API_STATS_V10 = BIT(19),
IWL_UCODE_TLV_API_NEW_VERSION = BIT(20),
};
/**
* enum iwl_ucode_tlv_capa - ucode capabilities
* @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
* @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
* @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
* @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
* @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
* @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
* tx power value into TPC Report action frame and Link Measurement Report
* action frame
* @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
* channel in DS parameter set element in probe requests.
* @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
* probe requests.
* @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
* @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
* which also implies support for the scheduler configuration command
* @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
* @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
* @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
* @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
* @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
* sources for the MCC. This TLV bit is a future replacement to
* IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
* is supported.
* @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
*/
enum iwl_ucode_tlv_capa {
IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0),
IWL_UCODE_TLV_CAPA_LAR_SUPPORT = BIT(1),
IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2),
IWL_UCODE_TLV_CAPA_BEAMFORMER = BIT(3),
IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6),
IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8),
IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9),
IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10),
IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11),
IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12),
IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = BIT(13),
IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18),
IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = BIT(22),
IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = BIT(28),
IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = BIT(29),
IWL_UCODE_TLV_CAPA_BT_COEX_RRC = BIT(30),
};
/* The default calibrate table size if not specified by firmware file */
#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
/* The default max probe length if not specified by the firmware file */
#define IWL_DEFAULT_MAX_PROBE_LENGTH 200
/*
* For 16.0 uCode and above, there is no differentiation between sections,
* just an offset to the HW address.
*/
#define IWL_UCODE_SECTION_MAX 12
#define IWL_API_ARRAY_SIZE 1
#define IWL_CAPABILITIES_ARRAY_SIZE 1
#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
/* uCode version contains 4 values: Major/Minor/API/Serial */
#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
/*
* Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
* flow triggers.
* @event_trigger: bitmap for which calibrations to perform according to
* event triggers.
*/
struct iwl_tlv_calib_ctrl {
__le32 flow_trigger;
__le32 event_trigger;
} __packed;
enum iwl_fw_phy_cfg {
FW_PHY_CFG_RADIO_TYPE_POS = 0,
FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
FW_PHY_CFG_RADIO_STEP_POS = 2,
FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
FW_PHY_CFG_RADIO_DASH_POS = 4,
FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
FW_PHY_CFG_TX_CHAIN_POS = 16,
FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
FW_PHY_CFG_RX_CHAIN_POS = 20,
FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
};
#define IWL_UCODE_MAX_CS 1
/**
* struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
* @cipher: a cipher suite selector
* @flags: cipher scheme flags (currently reserved for a future use)
* @hdr_len: a size of MPDU security header
* @pn_len: a size of PN
* @pn_off: an offset of pn from the beginning of the security header
* @key_idx_off: an offset of key index byte in the security header
* @key_idx_mask: a bit mask of key_idx bits
* @key_idx_shift: bit shift needed to get key_idx
* @mic_len: mic length in bytes
* @hw_cipher: a HW cipher index used in host commands
*/
struct iwl_fw_cipher_scheme {
__le32 cipher;
u8 flags;
u8 hdr_len;
u8 pn_len;
u8 pn_off;
u8 key_idx_off;
u8 key_idx_mask;
u8 key_idx_shift;
u8 mic_len;
u8 hw_cipher;
} __packed;
enum iwl_fw_dbg_reg_operator {
CSR_ASSIGN,
CSR_SETBIT,
CSR_CLEARBIT,
PRPH_ASSIGN,
PRPH_SETBIT,
PRPH_CLEARBIT,
};
/**
* struct iwl_fw_dbg_reg_op - an operation on a register
*
* @op: %enum iwl_fw_dbg_reg_operator
* @addr: offset of the register
* @val: value
*/
struct iwl_fw_dbg_reg_op {
u8 op;
u8 reserved[3];
__le32 addr;
__le32 val;
} __packed;
/**
* enum iwl_fw_dbg_monitor_mode - available monitor recording modes
*
* @SMEM_MODE: monitor stores the data in SMEM
* @EXTERNAL_MODE: monitor stores the data in allocated DRAM
* @MARBH_MODE: monitor stores the data in MARBH buffer
*/
enum iwl_fw_dbg_monitor_mode {
SMEM_MODE = 0,
EXTERNAL_MODE = 1,
MARBH_MODE = 2,
};
/**
* struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
*
* @version: version of the TLV - currently 0
* @monitor_mode: %enum iwl_fw_dbg_monitor_mode
* @base_reg: addr of the base addr register (PRPH)
* @end_reg: addr of the end addr register (PRPH)
* @write_ptr_reg: the addr of the reg of the write pointer
* @wrap_count: the addr of the reg of the wrap_count
* @base_shift: shift right of the base addr reg
* @end_shift: shift right of the end addr reg
* @reg_ops: array of registers operations
*
* This parses IWL_UCODE_TLV_FW_DBG_DEST
*/
struct iwl_fw_dbg_dest_tlv {
u8 version;
u8 monitor_mode;
u8 reserved[2];
__le32 base_reg;
__le32 end_reg;
__le32 write_ptr_reg;
__le32 wrap_count;
u8 base_shift;
u8 end_shift;
struct iwl_fw_dbg_reg_op reg_ops[0];
} __packed;
struct iwl_fw_dbg_conf_hcmd {
u8 id;
u8 reserved;
__le16 len;
u8 data[0];
} __packed;
/**
* enum iwl_fw_dbg_trigger_mode - triggers functionalities
*
* @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
* @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
*/
enum iwl_fw_dbg_trigger_mode {
IWL_FW_DBG_TRIGGER_START = BIT(0),
IWL_FW_DBG_TRIGGER_STOP = BIT(1),
};
/**
* enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
* @IWL_FW_DBG_CONF_VIF_ANY: any vif type
* @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
* @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
* @IWL_FW_DBG_CONF_VIF_AP: AP mode
* @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
* @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
* @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
*/
enum iwl_fw_dbg_trigger_vif_type {
IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
};
/**
* struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
* @id: %enum iwl_fw_dbg_trigger
* @vif_type: %enum iwl_fw_dbg_trigger_vif_type
* @stop_conf_ids: bitmap of configurations this trigger relates to.
* if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
* to the currently running configuration is set, the data should be
* collected.
* @stop_delay: how many milliseconds to wait before collecting the data
* after the STOP trigger fires.
* @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both
* @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
* configuration should be applied when the triggers kicks in.
* @occurrences: number of occurrences. 0 means the trigger will never fire.
*/
struct iwl_fw_dbg_trigger_tlv {
__le32 id;
__le32 vif_type;
__le32 stop_conf_ids;
__le32 stop_delay;
u8 mode;
u8 start_conf_id;
__le16 occurrences;
__le32 reserved[2];
u8 data[0];
} __packed;
#define FW_DBG_START_FROM_ALIVE 0
#define FW_DBG_CONF_MAX 32
#define FW_DBG_INVALID 0xff
/**
* struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
* @stop_consec_missed_bcon: stop recording if threshold is crossed.
* @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
* @start_consec_missed_bcon: start recording if threshold is crossed.
* @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
* @reserved1: reserved
* @reserved2: reserved
*/
struct iwl_fw_dbg_trigger_missed_bcon {
__le32 stop_consec_missed_bcon;
__le32 stop_consec_missed_bcon_since_rx;
__le32 reserved2[2];
__le32 start_consec_missed_bcon;
__le32 start_consec_missed_bcon_since_rx;
__le32 reserved1[2];
} __packed;
/**
* struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
* cmds: the list of commands to trigger the collection on
*/
struct iwl_fw_dbg_trigger_cmd {
struct cmd {
u8 cmd_id;
u8 group_id;
} __packed cmds[16];
} __packed;
/**
* iwl_fw_dbg_trigger_stats - configures trigger for statistics
* @stop_offset: the offset of the value to be monitored
* @stop_threshold: the threshold above which to collect
* @start_offset: the offset of the value to be monitored
* @start_threshold: the threshold above which to start recording
*/
struct iwl_fw_dbg_trigger_stats {
__le32 stop_offset;
__le32 stop_threshold;
__le32 start_offset;
__le32 start_threshold;
} __packed;
/**
* struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
* @rssi: RSSI value to trigger at
*/
struct iwl_fw_dbg_trigger_low_rssi {
__le32 rssi;
} __packed;
/**
* struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
* @id: conf id
* @usniffer: should the uSniffer image be used
* @num_of_hcmds: how many HCMDs to send are present here
* @hcmd: a variable length host command to be sent to apply the configuration.
* If there is more than one HCMD to send, they will appear one after the
* other and be sent in the order that they appear in.
* This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
* %FW_DBG_CONF_MAX configuration per run.
*/
struct iwl_fw_dbg_conf_tlv {
u8 id;
u8 usniffer;
u8 reserved;
u8 num_of_hcmds;
struct iwl_fw_dbg_conf_hcmd hcmd;
} __packed;
#endif /* __iwl_fw_file_h__ */