gpio: bcm281xx: Centralize register locking
Rather than unlock/re-lock for every write access, unlock a GPIO when
it is requested and re-lock it when it is freed. As a result, the GPIO
helper functions no longer have to deal with unlocking and re-locking
the register.
In addition, only unlock a specific GPIO rather than unlocking the
entire GPIO bank as before.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 93a5b01..e5aa4d0 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -83,22 +83,43 @@
return container_of(chip, struct bcm_kona_gpio, gpio_chip);
}
-static void bcm_kona_gpio_set_lockcode_bank(void __iomem *reg_base,
- int bank_id, int lockcode)
+static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base,
+ int bank_id, u32 lockcode)
{
writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
}
-static inline void bcm_kona_gpio_lock_bank(void __iomem *reg_base, int bank_id)
+static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
+ unsigned gpio)
{
- bcm_kona_gpio_set_lockcode_bank(reg_base, bank_id, LOCK_CODE);
+ u32 val;
+ unsigned long flags;
+ int bank_id = GPIO_BANK(gpio);
+
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+
+ val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
+ val |= BIT(gpio);
+ bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
+
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
-static inline void bcm_kona_gpio_unlock_bank(void __iomem *reg_base,
- int bank_id)
+static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
+ unsigned gpio)
{
- bcm_kona_gpio_set_lockcode_bank(reg_base, bank_id, UNLOCK_CODE);
+ u32 val;
+ unsigned long flags;
+ int bank_id = GPIO_BANK(gpio);
+
+ spin_lock_irqsave(&kona_gpio->lock, flags);
+
+ val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
+ val &= ~BIT(gpio);
+ bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
+
+ spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
@@ -113,7 +134,6 @@
kona_gpio = to_kona_gpio(chip);
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
/* determine the GPIO pin direction */
val = readl(reg_base + GPIO_CONTROL(gpio));
@@ -130,7 +150,6 @@
writel(val, reg_base + reg_offset);
out:
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
@@ -146,7 +165,6 @@
kona_gpio = to_kona_gpio(chip);
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
/* determine the GPIO pin direction */
val = readl(reg_base + GPIO_CONTROL(gpio));
@@ -157,32 +175,43 @@
GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
val = readl(reg_base + reg_offset);
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
/* return the specified bit status */
return !!(val & BIT(bit));
}
+static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
+
+ bcm_kona_gpio_unlock_gpio(kona_gpio, gpio);
+ return 0;
+}
+
+static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
+
+ bcm_kona_gpio_lock_gpio(kona_gpio, gpio);
+}
+
static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
u32 val;
unsigned long flags;
- int bank_id = GPIO_BANK(gpio);
kona_gpio = to_kona_gpio(chip);
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_IOTR_MASK;
val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
writel(val, reg_base + GPIO_CONTROL(gpio));
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
@@ -201,7 +230,6 @@
kona_gpio = to_kona_gpio(chip);
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_IOTR_MASK;
@@ -213,7 +241,6 @@
val |= BIT(bit);
writel(val, reg_base + reg_offset);
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
@@ -236,7 +263,6 @@
void __iomem *reg_base;
u32 val, res;
unsigned long flags;
- int bank_id = GPIO_BANK(gpio);
kona_gpio = to_kona_gpio(chip);
reg_base = kona_gpio->reg_base;
@@ -260,7 +286,6 @@
/* spin lock for read-modify-write of the GPIO register */
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_DBR_MASK;
@@ -275,7 +300,6 @@
writel(val, reg_base + GPIO_CONTROL(gpio));
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
@@ -284,6 +308,8 @@
static struct gpio_chip template_chip = {
.label = "bcm-kona-gpio",
.owner = THIS_MODULE,
+ .request = bcm_kona_gpio_request,
+ .free = bcm_kona_gpio_free,
.direction_input = bcm_kona_gpio_direction_input,
.get = bcm_kona_gpio_get,
.direction_output = bcm_kona_gpio_direction_output,
@@ -306,13 +332,11 @@
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
val = readl(reg_base + GPIO_INT_STATUS(bank_id));
val |= BIT(bit);
writel(val, reg_base + GPIO_INT_STATUS(bank_id));
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
@@ -329,13 +353,11 @@
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
val = readl(reg_base + GPIO_INT_MASK(bank_id));
val |= BIT(bit);
writel(val, reg_base + GPIO_INT_MASK(bank_id));
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
@@ -352,13 +374,11 @@
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
val |= BIT(bit);
writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
@@ -370,7 +390,6 @@
u32 lvl_type;
u32 val;
unsigned long flags;
- int bank_id = GPIO_BANK(gpio);
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
@@ -397,14 +416,12 @@
}
spin_lock_irqsave(&kona_gpio->lock, flags);
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_ITR_MASK;
val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
writel(val, reg_base + GPIO_CONTROL(gpio));
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
@@ -427,7 +444,6 @@
*/
reg_base = bank->kona_gpio->reg_base;
bank_id = bank->id;
- bcm_kona_gpio_unlock_bank(reg_base, bank_id);
while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
(~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
@@ -447,8 +463,6 @@
}
}
- bcm_kona_gpio_lock_bank(reg_base, bank_id);
-
chained_irq_exit(chip, desc);
}
@@ -534,10 +548,12 @@
reg_base = kona_gpio->reg_base;
/* disable interrupts and clear status */
for (i = 0; i < kona_gpio->num_bank; i++) {
- bcm_kona_gpio_unlock_bank(reg_base, i);
+ /* Unlock the entire bank first */
+ bcm_kona_gpio_write_lock_regs(kona_gpio, i, UNLOCK_CODE);
writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
- bcm_kona_gpio_lock_bank(reg_base, i);
+ /* Now re-lock the bank */
+ bcm_kona_gpio_write_lock_regs(kona_gpio, i, LOCK_CODE);
}
}