Staging: sm750fb: sm750_hw.c: Insert spaces after commas.
Insert Spaces after commas to rectify the
following checkpatch errors in sm750_hw.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 4b77eb1..131125c 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -30,7 +30,7 @@
struct sm750_share * spec_share;
- spec_share = container_of(share, struct sm750_share,share);
+ spec_share = container_of(share, struct sm750_share, share);
ret = 0;
share->vidreg_start = pci_resource_start(pdev, 1);
@@ -64,7 +64,7 @@
share->accel.dprBase = share->pvReg + DE_BASE_ADDR_TYPE1;
share->accel.dpPortBase = share->pvReg + DE_PORT_ADDR_TYPE1;
- ddk750_set_mmio(share->pvReg,share->devid, share->revid);
+ ddk750_set_mmio(share->pvReg, share->devid, share->revid);
share->vidmem_start = pci_resource_start(pdev, 0);
/* don't use pdev_resource[x].end - resource[x].start to
@@ -78,7 +78,7 @@
/* reserve the vidmem space of smi adaptor */
#if 0
- if((ret = pci_request_region(pdev,0,_moduleName_)))
+ if((ret = pci_request_region(pdev, 0, _moduleName_)))
{
pr_err("Can not request PCI regions.\n");
goto exit;
@@ -105,7 +105,7 @@
struct sm750_share * spec_share;
struct init_status * parm;
- spec_share = container_of(share, struct sm750_share,share);
+ spec_share = container_of(share, struct sm750_share, share);
parm = &spec_share->state.initParm;
if(parm->chip_clk == 0)
parm->chip_clk = (getChipType() == SM750LE)?
@@ -171,7 +171,7 @@
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
*/
- swI2CInit(0,1);
+ swI2CInit(0, 1);
/* Customer may NOT use CH7301 DVI chip, which has to be
@@ -269,7 +269,7 @@
struct lynx_share * share;
- share = container_of(crtc, struct lynxfb_par,crtc)->share;
+ share = container_of(crtc, struct lynxfb_par, crtc)->share;
switch (var->bits_per_pixel){
case 8:
@@ -297,7 +297,7 @@
struct fb_var_screeninfo* var,
struct fb_fix_screeninfo* fix)
{
- int ret,fmt;
+ int ret, fmt;
u32 reg;
mode_parameter_t modparm;
clock_type_t clock;
@@ -364,7 +364,7 @@
reg = var->xres * (var->bits_per_pixel >> 3);
/* crtc->channel is not equal to par->index on numeric,be aware of that */
- reg = PADDING(crtc->line_pad,reg);
+ reg = PADDING(crtc->line_pad, reg);
POKE32(PANEL_FB_WIDTH,
FIELD_VALUE(0, PANEL_FB_WIDTH, WIDTH, reg)|
@@ -382,7 +382,7 @@
POKE32(PANEL_PLANE_BR,
FIELD_VALUE(0, PANEL_PLANE_BR, BOTTOM, var->yres - 1)|
- FIELD_VALUE(0, PANEL_PLANE_BR,RIGHT, var->xres - 1));
+ FIELD_VALUE(0, PANEL_PLANE_BR, RIGHT, var->xres - 1));
/* set pixel format */
reg = PEEK32(PANEL_DISPLAY_CTRL);
@@ -423,17 +423,17 @@
int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
ushort red, ushort green, ushort blue)
{
- static unsigned int add[]={PANEL_PALETTE_RAM,CRT_PALETTE_RAM};
+ static unsigned int add[]={PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
POKE32(add[crtc->channel] + index*4, (red<<16)|(green<<8)|blue);
return 0;
}
int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
- int dpms,crtdb;
+ int dpms, crtdb;
switch(blank)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
#else
case VESA_NO_BLANKING:
@@ -441,13 +441,13 @@
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_NORMAL:
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#endif
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_VSYNC_SUSPEND:
#else
case VESA_VSYNC_SUSPEND:
@@ -455,7 +455,7 @@
dpms = CRT_DISPLAY_CTRL_DPMS_2;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_HSYNC_SUSPEND:
#else
case VESA_HSYNC_SUSPEND:
@@ -463,7 +463,7 @@
dpms = CRT_DISPLAY_CTRL_DPMS_1;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_POWERDOWN:
#else
case VESA_POWERDOWN:
@@ -482,7 +482,7 @@
return 0;
}
-int hw_sm750_setBLANK(struct lynxfb_output* output,int blank)
+int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
{
unsigned int dpms, pps, crtdb;
@@ -490,7 +490,7 @@
switch (blank)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
#else
case VESA_NO_BLANKING:
@@ -500,7 +500,7 @@
pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_NORMAL:
pr_info("flag = FB_BLANK_NORMAL \n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
@@ -508,7 +508,7 @@
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#endif
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_VSYNC_SUSPEND:
#else
case VESA_VSYNC_SUSPEND:
@@ -517,7 +517,7 @@
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_HSYNC_SUSPEND:
#else
case VESA_HSYNC_SUSPEND:
@@ -526,7 +526,7 @@
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_POWERDOWN:
#else
case VESA_POWERDOWN:
@@ -539,8 +539,8 @@
if(output->paths & sm750_crt){
- POKE32(SYSTEM_CTRL,FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
- POKE32(CRT_DISPLAY_CTRL,FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL,BLANK, crtdb));
+ POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
+ POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
if(output->paths & sm750_panel){
@@ -558,21 +558,21 @@
if(getChipType() == SM750LE){
reg = PEEK32(DE_STATE1);
- reg = FIELD_SET(reg, DE_STATE1, DE_ABORT,ON);
- POKE32(DE_STATE1,reg);
+ reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON);
+ POKE32(DE_STATE1, reg);
reg = PEEK32(DE_STATE1);
- reg = FIELD_SET(reg, DE_STATE1, DE_ABORT,OFF);
+ reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, OFF);
POKE32(DE_STATE1, reg);
}else{
/* engine reset */
reg = PEEK32(SYSTEM_CTRL);
- reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT,ON);
+ reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, ON);
POKE32(SYSTEM_CTRL, reg);
reg = PEEK32(SYSTEM_CTRL);
- reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT,OFF);
+ reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, OFF);
POKE32(SYSTEM_CTRL, reg);
}
@@ -602,9 +602,9 @@
int i=0x10000000;
while(i--){
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
- if((FIELD_GET(dwVal,SYSTEM_CTRL,DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
- (FIELD_GET(dwVal,SYSTEM_CTRL,DE_FIFO) == SYSTEM_CTRL_DE_FIFO_EMPTY) &&
- (FIELD_GET(dwVal,SYSTEM_CTRL,DE_MEM_FIFO) == SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
+ if((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
+ (FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) == SYSTEM_CTRL_DE_FIFO_EMPTY) &&
+ (FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) == SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
{
return 0;
}