| /* |
| * AP4EVB board support |
| * |
| * Copyright (C) 2010 Magnus Damm |
| * Copyright (C) 2008 Yoshihiro Shimoda |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include <linux/clk.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/mfd/tmio.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sh_mobile_sdhi.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mmc/sh_mmcif.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/tsc2007.h> |
| #include <linux/io.h> |
| #include <linux/pinctrl/machine.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/smsc911x.h> |
| #include <linux/sh_intc.h> |
| #include <linux/sh_clk.h> |
| #include <linux/gpio.h> |
| #include <linux/input.h> |
| #include <linux/leds.h> |
| #include <linux/input/sh_keysc.h> |
| #include <linux/usb/r8a66597.h> |
| #include <linux/pm_clock.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <media/sh_mobile_ceu.h> |
| #include <media/sh_mobile_csi2.h> |
| #include <media/soc_camera.h> |
| |
| #include <sound/sh_fsi.h> |
| #include <sound/simple_card.h> |
| |
| #include <video/sh_mobile_hdmi.h> |
| #include <video/sh_mobile_lcdc.h> |
| #include <video/sh_mipi_dsi.h> |
| |
| #include <mach/common.h> |
| #include <mach/irqs.h> |
| #include <mach/sh7372.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/setup.h> |
| |
| #include "sh-gpio.h" |
| |
| /* |
| * Address Interface BusWidth note |
| * ------------------------------------------------------------------ |
| * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON |
| * 0x0800_0000 user area - |
| * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF |
| * 0x1400_0000 Ether (LAN9220) 16bit |
| * 0x1600_0000 user area - cannot use with NAND |
| * 0x1800_0000 user area - |
| * 0x1A00_0000 - |
| * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit |
| */ |
| |
| /* |
| * NOR Flash ROM |
| * |
| * SW1 | SW2 | SW7 | NOR Flash ROM |
| * bit1 | bit1 bit2 | bit1 | Memory allocation |
| * ------+------------+------+------------------ |
| * OFF | ON OFF | ON | Area 0 |
| * OFF | ON OFF | OFF | Area 4 |
| */ |
| |
| /* |
| * NAND Flash ROM |
| * |
| * SW1 | SW2 | SW7 | NAND Flash ROM |
| * bit1 | bit1 bit2 | bit2 | Memory allocation |
| * ------+------------+------+------------------ |
| * OFF | ON OFF | ON | FCE 0 |
| * OFF | ON OFF | OFF | FCE 1 |
| */ |
| |
| /* |
| * SMSC 9220 |
| * |
| * SW1 SMSC 9220 |
| * ----------------------- |
| * ON access disable |
| * OFF access enable |
| */ |
| |
| /* |
| * LCD / IRQ / KEYSC / IrDA |
| * |
| * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen) |
| * LCD = 2nd LCDC (WVGA) |
| * |
| * | SW43 | |
| * SW3 | ON | OFF | |
| * -------------+-----------------------+---------------+ |
| * ON | KEY / IrDA | LCD | |
| * OFF | KEY / IrDA / IRQ | IRQ | |
| * |
| * |
| * QHD / WVGA display |
| * |
| * You can choice display type on menuconfig. |
| * Then, check above dip-switch. |
| */ |
| |
| /* |
| * USB |
| * |
| * J7 : 1-2 MAX3355E VBUS |
| * 2-3 DC 5.0V |
| * |
| * S39: bit2: off |
| */ |
| |
| /* |
| * FSI/FSMI |
| * |
| * SW41 : ON : SH-Mobile AP4 Audio Mode |
| * : OFF : Bluetooth Audio Mode |
| * |
| * it needs amixer settings for playing |
| * |
| * amixer set "Headphone Enable" on |
| */ |
| |
| /* |
| * MMC0/SDHI1 (CN7) |
| * |
| * J22 : select card voltage |
| * 1-2 pin : 1.8v |
| * 2-3 pin : 3.3v |
| * |
| * SW1 | SW33 |
| * | bit1 | bit2 | bit3 | bit4 |
| * ------------+------+------+------+------- |
| * MMC0 OFF | OFF | ON | ON | X |
| * SDHI1 OFF | ON | X | OFF | ON |
| * |
| * voltage lebel |
| * CN7 : 1.8v |
| * CN12: 3.3v |
| */ |
| |
| /* Dummy supplies, where voltage doesn't matter */ |
| static struct regulator_consumer_supply fixed1v8_power_consumers[] = |
| { |
| /* J22 default position: 1.8V */ |
| REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), |
| REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), |
| }; |
| |
| static struct regulator_consumer_supply fixed3v3_power_consumers[] = |
| { |
| REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), |
| }; |
| |
| static struct regulator_consumer_supply dummy_supplies[] = { |
| REGULATOR_SUPPLY("vddvario", "smsc911x"), |
| REGULATOR_SUPPLY("vdd33a", "smsc911x"), |
| }; |
| |
| /* MTD */ |
| static struct mtd_partition nor_flash_partitions[] = { |
| { |
| .name = "loader", |
| .offset = 0x00000000, |
| .size = 512 * 1024, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| { |
| .name = "bootenv", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 512 * 1024, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| { |
| .name = "kernel_ro", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 8 * 1024 * 1024, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| { |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 8 * 1024 * 1024, |
| }, |
| { |
| .name = "data", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct physmap_flash_data nor_flash_data = { |
| .width = 2, |
| .parts = nor_flash_partitions, |
| .nr_parts = ARRAY_SIZE(nor_flash_partitions), |
| }; |
| |
| static struct resource nor_flash_resources[] = { |
| [0] = { |
| .start = 0x20000000, /* CS0 shadow instead of regular CS0 */ |
| .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */ |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device nor_flash_device = { |
| .name = "physmap-flash", |
| .dev = { |
| .platform_data = &nor_flash_data, |
| }, |
| .num_resources = ARRAY_SIZE(nor_flash_resources), |
| .resource = nor_flash_resources, |
| }; |
| |
| /* SMSC 9220 */ |
| static struct resource smc911x_resources[] = { |
| { |
| .start = 0x14000000, |
| .end = 0x16000000 - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = evt2irq(0x02c0) /* IRQ6A */, |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, |
| }, |
| }; |
| |
| static struct smsc911x_platform_config smsc911x_info = { |
| .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS, |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, |
| }; |
| |
| static struct platform_device smc911x_device = { |
| .name = "smsc911x", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(smc911x_resources), |
| .resource = smc911x_resources, |
| .dev = { |
| .platform_data = &smsc911x_info, |
| }, |
| }; |
| |
| /* |
| * The card detect pin of the top SD/MMC slot (CN7) is active low and is |
| * connected to GPIO A22 of SH7372 (GPIO 41). |
| */ |
| static int slot_cn7_get_cd(struct platform_device *pdev) |
| { |
| return !gpio_get_value(41); |
| } |
| /* MERAM */ |
| static struct sh_mobile_meram_info meram_info = { |
| .addr_mode = SH_MOBILE_MERAM_MODE1, |
| }; |
| |
| static struct resource meram_resources[] = { |
| [0] = { |
| .name = "regs", |
| .start = 0xe8000000, |
| .end = 0xe807ffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "meram", |
| .start = 0xe8080000, |
| .end = 0xe81fffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device meram_device = { |
| .name = "sh_mobile_meram", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(meram_resources), |
| .resource = meram_resources, |
| .dev = { |
| .platform_data = &meram_info, |
| }, |
| }; |
| |
| /* SH_MMCIF */ |
| static struct resource sh_mmcif_resources[] = { |
| [0] = { |
| .name = "MMCIF", |
| .start = 0xE6BD0000, |
| .end = 0xE6BD00FF, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| /* MMC ERR */ |
| .start = evt2irq(0x1ac0), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| /* MMC NOR */ |
| .start = evt2irq(0x1ae0), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct sh_mmcif_plat_data sh_mmcif_plat = { |
| .sup_pclk = 0, |
| .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, |
| .caps = MMC_CAP_4_BIT_DATA | |
| MMC_CAP_8_BIT_DATA | |
| MMC_CAP_NEEDS_POLL, |
| .get_cd = slot_cn7_get_cd, |
| .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, |
| .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, |
| }; |
| |
| static struct platform_device sh_mmcif_device = { |
| .name = "sh_mmcif", |
| .id = 0, |
| .dev = { |
| .dma_mask = NULL, |
| .coherent_dma_mask = 0xffffffff, |
| .platform_data = &sh_mmcif_plat, |
| }, |
| .num_resources = ARRAY_SIZE(sh_mmcif_resources), |
| .resource = sh_mmcif_resources, |
| }; |
| |
| /* SDHI0 */ |
| static struct sh_mobile_sdhi_info sdhi0_info = { |
| .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, |
| .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, |
| .tmio_caps = MMC_CAP_SDIO_IRQ, |
| }; |
| |
| static struct resource sdhi0_resources[] = { |
| [0] = { |
| .name = "SDHI0", |
| .start = 0xe6850000, |
| .end = 0xe68500ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [3] = { |
| .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device sdhi0_device = { |
| .name = "sh_mobile_sdhi", |
| .num_resources = ARRAY_SIZE(sdhi0_resources), |
| .resource = sdhi0_resources, |
| .id = 0, |
| .dev = { |
| .platform_data = &sdhi0_info, |
| }, |
| }; |
| |
| /* SDHI1 */ |
| static struct sh_mobile_sdhi_info sdhi1_info = { |
| .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, |
| .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, |
| .tmio_ocr_mask = MMC_VDD_165_195, |
| .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, |
| .tmio_caps = MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ, |
| .get_cd = slot_cn7_get_cd, |
| }; |
| |
| static struct resource sdhi1_resources[] = { |
| [0] = { |
| .name = "SDHI1", |
| .start = 0xe6860000, |
| .end = 0xe68600ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| [3] = { |
| .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device sdhi1_device = { |
| .name = "sh_mobile_sdhi", |
| .num_resources = ARRAY_SIZE(sdhi1_resources), |
| .resource = sdhi1_resources, |
| .id = 1, |
| .dev = { |
| .platform_data = &sdhi1_info, |
| }, |
| }; |
| |
| /* USB1 */ |
| static void usb1_host_port_power(int port, int power) |
| { |
| if (!power) /* only power-on supported for now */ |
| return; |
| |
| /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ |
| __raw_writew(__raw_readw(IOMEM(0xE68B0008)) | 0x600, IOMEM(0xE68B0008)); |
| } |
| |
| static struct r8a66597_platdata usb1_host_data = { |
| .on_chip = 1, |
| .port_power = usb1_host_port_power, |
| }; |
| |
| static struct resource usb1_host_resources[] = { |
| [0] = { |
| .name = "USBHS", |
| .start = 0xE68B0000, |
| .end = 0xE68B00E6 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device usb1_host_device = { |
| .name = "r8a66597_hcd", |
| .id = 1, |
| .dev = { |
| .dma_mask = NULL, /* not use dma */ |
| .coherent_dma_mask = 0xffffffff, |
| .platform_data = &usb1_host_data, |
| }, |
| .num_resources = ARRAY_SIZE(usb1_host_resources), |
| .resource = usb1_host_resources, |
| }; |
| |
| /* |
| * QHD display |
| */ |
| #ifdef CONFIG_AP4EVB_QHD |
| |
| /* KEYSC (Needs SW43 set to ON) */ |
| static struct sh_keysc_info keysc_info = { |
| .mode = SH_KEYSC_MODE_1, |
| .scan_timing = 3, |
| .delay = 2500, |
| .keycodes = { |
| KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, |
| KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, |
| KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, |
| KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, |
| KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, |
| }, |
| }; |
| |
| static struct resource keysc_resources[] = { |
| [0] = { |
| .name = "KEYSC", |
| .start = 0xe61b0000, |
| .end = 0xe61b0063, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x0be0), /* KEYSC_KEY */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device keysc_device = { |
| .name = "sh_keysc", |
| .id = 0, /* "keysc0" clock */ |
| .num_resources = ARRAY_SIZE(keysc_resources), |
| .resource = keysc_resources, |
| .dev = { |
| .platform_data = &keysc_info, |
| }, |
| }; |
| |
| /* MIPI-DSI */ |
| static int sh_mipi_set_dot_clock(struct platform_device *pdev, |
| void __iomem *base, |
| int enable) |
| { |
| struct clk *pck = clk_get(&pdev->dev, "dsip_clk"); |
| |
| if (IS_ERR(pck)) |
| return PTR_ERR(pck); |
| |
| if (enable) { |
| /* |
| * DSIPCLK = 24MHz |
| * D-PHY = DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl) |
| * HsByteCLK = D-PHY/8 = 39MHz |
| * |
| * X * Y * FPS = |
| * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz |
| */ |
| clk_set_rate(pck, clk_round_rate(pck, 24000000)); |
| clk_enable(pck); |
| } else { |
| clk_disable(pck); |
| } |
| |
| clk_put(pck); |
| |
| return 0; |
| } |
| |
| static struct resource mipidsi0_resources[] = { |
| [0] = { |
| .start = 0xffc60000, |
| .end = 0xffc63073, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = 0xffc68000, |
| .end = 0xffc680ef, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct sh_mipi_dsi_info mipidsi0_info = { |
| .data_format = MIPI_RGB888, |
| .channel = LCDC_CHAN_MAINLCD, |
| .lane = 2, |
| .vsynw_offset = 17, |
| .phyctrl = 0x6 << 8, |
| .flags = SH_MIPI_DSI_SYNC_PULSES_MODE | |
| SH_MIPI_DSI_HSbyteCLK, |
| .set_dot_clock = sh_mipi_set_dot_clock, |
| }; |
| |
| static struct platform_device mipidsi0_device = { |
| .name = "sh-mipi-dsi", |
| .num_resources = ARRAY_SIZE(mipidsi0_resources), |
| .resource = mipidsi0_resources, |
| .id = 0, |
| .dev = { |
| .platform_data = &mipidsi0_info, |
| }, |
| }; |
| |
| static struct platform_device *qhd_devices[] __initdata = { |
| &mipidsi0_device, |
| &keysc_device, |
| }; |
| #endif /* CONFIG_AP4EVB_QHD */ |
| |
| /* LCDC0 */ |
| static const struct fb_videomode ap4evb_lcdc_modes[] = { |
| { |
| #ifdef CONFIG_AP4EVB_QHD |
| .name = "R63302(QHD)", |
| .xres = 544, |
| .yres = 961, |
| .left_margin = 72, |
| .right_margin = 600, |
| .hsync_len = 16, |
| .upper_margin = 8, |
| .lower_margin = 8, |
| .vsync_len = 2, |
| .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, |
| #else |
| .name = "WVGA Panel", |
| .xres = 800, |
| .yres = 480, |
| .left_margin = 220, |
| .right_margin = 110, |
| .hsync_len = 70, |
| .upper_margin = 20, |
| .lower_margin = 5, |
| .vsync_len = 5, |
| .sync = 0, |
| #endif |
| }, |
| }; |
| |
| static const struct sh_mobile_meram_cfg lcd_meram_cfg = { |
| .icb[0] = { |
| .meram_size = 0x40, |
| }, |
| .icb[1] = { |
| .meram_size = 0x40, |
| }, |
| }; |
| |
| static struct sh_mobile_lcdc_info lcdc_info = { |
| .meram_dev = &meram_info, |
| .ch[0] = { |
| .chan = LCDC_CHAN_MAINLCD, |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .lcd_modes = ap4evb_lcdc_modes, |
| .num_modes = ARRAY_SIZE(ap4evb_lcdc_modes), |
| .meram_cfg = &lcd_meram_cfg, |
| #ifdef CONFIG_AP4EVB_QHD |
| .tx_dev = &mipidsi0_device, |
| #endif |
| } |
| }; |
| |
| static struct resource lcdc_resources[] = { |
| [0] = { |
| .name = "LCDC", |
| .start = 0xfe940000, /* P4-only space */ |
| .end = 0xfe943fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x580), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device lcdc_device = { |
| .name = "sh_mobile_lcdc_fb", |
| .num_resources = ARRAY_SIZE(lcdc_resources), |
| .resource = lcdc_resources, |
| .dev = { |
| .platform_data = &lcdc_info, |
| .coherent_dma_mask = ~0, |
| }, |
| }; |
| |
| /* FSI */ |
| #define IRQ_FSI evt2irq(0x1840) |
| static struct sh_fsi_platform_info fsi_info = { |
| .port_b = { |
| .flags = SH_FSI_CLK_CPG | |
| SH_FSI_FMT_SPDIF, |
| }, |
| }; |
| |
| static struct resource fsi_resources[] = { |
| [0] = { |
| .name = "FSI", |
| .start = 0xFE3C0000, |
| .end = 0xFE3C0400 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_FSI, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device fsi_device = { |
| .name = "sh_fsi2", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(fsi_resources), |
| .resource = fsi_resources, |
| .dev = { |
| .platform_data = &fsi_info, |
| }, |
| }; |
| |
| static struct asoc_simple_card_info fsi2_ak4643_info = { |
| .name = "AK4643", |
| .card = "FSI2A-AK4643", |
| .codec = "ak4642-codec.0-0013", |
| .platform = "sh_fsi2", |
| .daifmt = SND_SOC_DAIFMT_LEFT_J, |
| .cpu_dai = { |
| .name = "fsia-dai", |
| .fmt = SND_SOC_DAIFMT_CBS_CFS, |
| }, |
| .codec_dai = { |
| .name = "ak4642-hifi", |
| .fmt = SND_SOC_DAIFMT_CBM_CFM, |
| .sysclk = 11289600, |
| }, |
| }; |
| |
| static struct platform_device fsi_ak4643_device = { |
| .name = "asoc-simple-card", |
| .dev = { |
| .platform_data = &fsi2_ak4643_info, |
| }, |
| }; |
| |
| /* LCDC1 */ |
| static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, |
| unsigned long *parent_freq); |
| |
| static struct sh_mobile_hdmi_info hdmi_info = { |
| .flags = HDMI_SND_SRC_SPDIF, |
| .clk_optimize_parent = ap4evb_clk_optimize, |
| }; |
| |
| static struct resource hdmi_resources[] = { |
| [0] = { |
| .name = "HDMI", |
| .start = 0xe6be0000, |
| .end = 0xe6be00ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ |
| .start = evt2irq(0x17e0), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device hdmi_device = { |
| .name = "sh-mobile-hdmi", |
| .num_resources = ARRAY_SIZE(hdmi_resources), |
| .resource = hdmi_resources, |
| .id = -1, |
| .dev = { |
| .platform_data = &hdmi_info, |
| }, |
| }; |
| |
| static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, |
| unsigned long *parent_freq) |
| { |
| struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); |
| long error; |
| |
| if (IS_ERR(hdmi_ick)) { |
| int ret = PTR_ERR(hdmi_ick); |
| pr_err("Cannot get HDMI ICK: %d\n", ret); |
| return ret; |
| } |
| |
| error = clk_round_parent(hdmi_ick, target, best_freq, parent_freq, 1, 64); |
| |
| clk_put(hdmi_ick); |
| |
| return error; |
| } |
| |
| static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { |
| .icb[0] = { |
| .meram_size = 0x100, |
| }, |
| .icb[1] = { |
| .meram_size = 0x100, |
| }, |
| }; |
| |
| static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { |
| .clock_source = LCDC_CLK_EXTERNAL, |
| .meram_dev = &meram_info, |
| .ch[0] = { |
| .chan = LCDC_CHAN_MAINLCD, |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .interface_type = RGB24, |
| .clock_divider = 1, |
| .flags = LCDC_FLAGS_DWPOL, |
| .meram_cfg = &hdmi_meram_cfg, |
| .tx_dev = &hdmi_device, |
| } |
| }; |
| |
| static struct resource lcdc1_resources[] = { |
| [0] = { |
| .name = "LCDC1", |
| .start = 0xfe944000, |
| .end = 0xfe947fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x1780), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device lcdc1_device = { |
| .name = "sh_mobile_lcdc_fb", |
| .num_resources = ARRAY_SIZE(lcdc1_resources), |
| .resource = lcdc1_resources, |
| .id = 1, |
| .dev = { |
| .platform_data = &sh_mobile_lcdc1_info, |
| .coherent_dma_mask = ~0, |
| }, |
| }; |
| |
| static struct asoc_simple_card_info fsi2_hdmi_info = { |
| .name = "HDMI", |
| .card = "FSI2B-HDMI", |
| .codec = "sh-mobile-hdmi", |
| .platform = "sh_fsi2", |
| .cpu_dai = { |
| .name = "fsib-dai", |
| .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, |
| }, |
| .codec_dai = { |
| .name = "sh_mobile_hdmi-hifi", |
| }, |
| }; |
| |
| static struct platform_device fsi_hdmi_device = { |
| .name = "asoc-simple-card", |
| .id = 1, |
| .dev = { |
| .platform_data = &fsi2_hdmi_info, |
| }, |
| }; |
| |
| static struct gpio_led ap4evb_leds[] = { |
| { |
| .name = "led4", |
| .gpio = 185, |
| .default_state = LEDS_GPIO_DEFSTATE_ON, |
| }, |
| { |
| .name = "led2", |
| .gpio = 186, |
| .default_state = LEDS_GPIO_DEFSTATE_ON, |
| }, |
| { |
| .name = "led3", |
| .gpio = 187, |
| .default_state = LEDS_GPIO_DEFSTATE_ON, |
| }, |
| { |
| .name = "led1", |
| .gpio = 188, |
| .default_state = LEDS_GPIO_DEFSTATE_ON, |
| } |
| }; |
| |
| static struct gpio_led_platform_data ap4evb_leds_pdata = { |
| .num_leds = ARRAY_SIZE(ap4evb_leds), |
| .leds = ap4evb_leds, |
| }; |
| |
| static struct platform_device leds_device = { |
| .name = "leds-gpio", |
| .id = 0, |
| .dev = { |
| .platform_data = &ap4evb_leds_pdata, |
| }, |
| }; |
| |
| static struct i2c_board_info imx074_info = { |
| I2C_BOARD_INFO("imx074", 0x1a), |
| }; |
| |
| static struct soc_camera_link imx074_link = { |
| .bus_id = 0, |
| .board_info = &imx074_info, |
| .i2c_adapter_id = 0, |
| .module_name = "imx074", |
| }; |
| |
| static struct platform_device ap4evb_camera = { |
| .name = "soc-camera-pdrv", |
| .id = 0, |
| .dev = { |
| .platform_data = &imx074_link, |
| }, |
| }; |
| |
| static struct sh_csi2_client_config csi2_clients[] = { |
| { |
| .phy = SH_CSI2_PHY_MAIN, |
| .lanes = 0, /* default: 2 lanes */ |
| .channel = 0, |
| .pdev = &ap4evb_camera, |
| }, |
| }; |
| |
| static struct sh_csi2_pdata csi2_info = { |
| .type = SH_CSI2C, |
| .clients = csi2_clients, |
| .num_clients = ARRAY_SIZE(csi2_clients), |
| .flags = SH_CSI2_ECC | SH_CSI2_CRC, |
| }; |
| |
| static struct resource csi2_resources[] = { |
| [0] = { |
| .name = "CSI2", |
| .start = 0xffc90000, |
| .end = 0xffc90fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x17a0), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct sh_mobile_ceu_companion csi2 = { |
| .id = 0, |
| .num_resources = ARRAY_SIZE(csi2_resources), |
| .resource = csi2_resources, |
| .platform_data = &csi2_info, |
| }; |
| |
| static struct sh_mobile_ceu_info sh_mobile_ceu_info = { |
| .flags = SH_CEU_FLAG_USE_8BIT_BUS, |
| .max_width = 8188, |
| .max_height = 8188, |
| .csi2 = &csi2, |
| }; |
| |
| static struct resource ceu_resources[] = { |
| [0] = { |
| .name = "CEU", |
| .start = 0xfe910000, |
| .end = 0xfe91009f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x880), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| /* place holder for contiguous memory */ |
| }, |
| }; |
| |
| static struct platform_device ceu_device = { |
| .name = "sh_mobile_ceu", |
| .id = 0, /* "ceu0" clock */ |
| .num_resources = ARRAY_SIZE(ceu_resources), |
| .resource = ceu_resources, |
| .dev = { |
| .platform_data = &sh_mobile_ceu_info, |
| .coherent_dma_mask = 0xffffffff, |
| }, |
| }; |
| |
| static struct platform_device *ap4evb_devices[] __initdata = { |
| &leds_device, |
| &nor_flash_device, |
| &smc911x_device, |
| &sdhi0_device, |
| &sdhi1_device, |
| &usb1_host_device, |
| &fsi_device, |
| &fsi_ak4643_device, |
| &fsi_hdmi_device, |
| &sh_mmcif_device, |
| &hdmi_device, |
| &lcdc_device, |
| &lcdc1_device, |
| &ceu_device, |
| &ap4evb_camera, |
| &meram_device, |
| }; |
| |
| static void __init hdmi_init_pm_clock(void) |
| { |
| struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); |
| int ret; |
| long rate; |
| |
| if (IS_ERR(hdmi_ick)) { |
| ret = PTR_ERR(hdmi_ick); |
| pr_err("Cannot get HDMI ICK: %d\n", ret); |
| goto out; |
| } |
| |
| ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk); |
| if (ret < 0) { |
| pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount); |
| goto out; |
| } |
| |
| pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk)); |
| |
| rate = clk_round_rate(&sh7372_pllc2_clk, 594000000); |
| if (rate < 0) { |
| pr_err("Cannot get suitable rate: %ld\n", rate); |
| ret = rate; |
| goto out; |
| } |
| |
| ret = clk_set_rate(&sh7372_pllc2_clk, rate); |
| if (ret < 0) { |
| pr_err("Cannot set rate %ld: %d\n", rate, ret); |
| goto out; |
| } |
| |
| pr_debug("PLLC2 set frequency %lu\n", rate); |
| |
| ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); |
| if (ret < 0) |
| pr_err("Cannot set HDMI parent: %d\n", ret); |
| |
| out: |
| if (!IS_ERR(hdmi_ick)) |
| clk_put(hdmi_ick); |
| } |
| |
| /* TouchScreen */ |
| #ifdef CONFIG_AP4EVB_QHD |
| # define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 |
| # define GPIO_TSC_PORT 123 |
| #else /* WVGA */ |
| # define GPIO_TSC_IRQ GPIO_FN_IRQ7_40 |
| # define GPIO_TSC_PORT 40 |
| #endif |
| |
| #define IRQ28 evt2irq(0x3380) /* IRQ28A */ |
| #define IRQ7 evt2irq(0x02e0) /* IRQ7A */ |
| static int ts_get_pendown_state(void) |
| { |
| int val; |
| |
| gpio_free(GPIO_TSC_IRQ); |
| |
| gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL); |
| |
| val = gpio_get_value(GPIO_TSC_PORT); |
| |
| gpio_request(GPIO_TSC_IRQ, NULL); |
| |
| return !val; |
| } |
| |
| static int ts_init(void) |
| { |
| gpio_request(GPIO_TSC_IRQ, NULL); |
| |
| return 0; |
| } |
| |
| static struct tsc2007_platform_data tsc2007_info = { |
| .model = 2007, |
| .x_plate_ohms = 180, |
| .get_pendown_state = ts_get_pendown_state, |
| .init_platform_hw = ts_init, |
| }; |
| |
| static struct i2c_board_info tsc_device = { |
| I2C_BOARD_INFO("tsc2007", 0x48), |
| .type = "tsc2007", |
| .platform_data = &tsc2007_info, |
| /*.irq is selected on ap4evb_init */ |
| }; |
| |
| /* I2C */ |
| static struct i2c_board_info i2c0_devices[] = { |
| { |
| I2C_BOARD_INFO("ak4643", 0x13), |
| }, |
| }; |
| |
| static struct i2c_board_info i2c1_devices[] = { |
| { |
| I2C_BOARD_INFO("r2025sd", 0x32), |
| }, |
| }; |
| |
| |
| static const struct pinctrl_map ap4evb_pinctrl_map[] = { |
| /* CEU */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372", |
| "ceu_clk_0", "ceu"), |
| /* MMCIF */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", |
| "mmc0_data8_0", "mmc0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", |
| "mmc0_ctrl_0", "mmc0"), |
| /* SDHI0 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", |
| "sdhi0_data4", "sdhi0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", |
| "sdhi0_ctrl", "sdhi0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", |
| "sdhi0_cd", "sdhi0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", |
| "sdhi0_wp", "sdhi0"), |
| /* SDHI1 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", |
| "sdhi1_data4", "sdhi1"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", |
| "sdhi1_ctrl", "sdhi1"), |
| }; |
| |
| #define GPIO_PORT9CR IOMEM(0xE6051009) |
| #define GPIO_PORT10CR IOMEM(0xE605100A) |
| #define USCCR1 IOMEM(0xE6058144) |
| static void __init ap4evb_init(void) |
| { |
| struct pm_domain_device domain_devices[] = { |
| { "A4LC", &lcdc1_device, }, |
| { "A4LC", &lcdc_device, }, |
| { "A4MP", &fsi_device, }, |
| { "A3SP", &sh_mmcif_device, }, |
| { "A3SP", &sdhi0_device, }, |
| { "A3SP", &sdhi1_device, }, |
| { "A4R", &ceu_device, }, |
| }; |
| u32 srcr4; |
| struct clk *clk; |
| |
| regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, |
| ARRAY_SIZE(fixed1v8_power_consumers), 1800000); |
| regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, |
| ARRAY_SIZE(fixed3v3_power_consumers), 3300000); |
| regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); |
| |
| /* External clock source */ |
| clk_set_rate(&sh7372_dv_clki_clk, 27000000); |
| |
| pinctrl_register_mappings(ap4evb_pinctrl_map, |
| ARRAY_SIZE(ap4evb_pinctrl_map)); |
| sh7372_pinmux_init(); |
| |
| /* enable SCIFA0 */ |
| gpio_request(GPIO_FN_SCIFA0_TXD, NULL); |
| gpio_request(GPIO_FN_SCIFA0_RXD, NULL); |
| |
| /* enable SMSC911X */ |
| gpio_request(GPIO_FN_CS5A, NULL); |
| gpio_request(GPIO_FN_IRQ6_39, NULL); |
| |
| /* enable Debug switch (S6) */ |
| gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL); |
| gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL); |
| gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL); |
| gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL); |
| |
| /* USB enable */ |
| gpio_request(GPIO_FN_VBUS0_1, NULL); |
| gpio_request(GPIO_FN_IDIN_1_18, NULL); |
| gpio_request(GPIO_FN_PWEN_1_115, NULL); |
| gpio_request(GPIO_FN_OVCN_1_114, NULL); |
| gpio_request(GPIO_FN_EXTLP_1, NULL); |
| gpio_request(GPIO_FN_OVCN2_1, NULL); |
| |
| /* setup USB phy */ |
| __raw_writew(0x8a0a, IOMEM(0xE6058130)); /* USBCR4 */ |
| |
| /* enable FSI2 port A (ak4643) */ |
| gpio_request(GPIO_FN_FSIAIBT, NULL); |
| gpio_request(GPIO_FN_FSIAILR, NULL); |
| gpio_request(GPIO_FN_FSIAISLD, NULL); |
| gpio_request(GPIO_FN_FSIAOSLD, NULL); |
| gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ |
| |
| gpio_request(9, NULL); |
| gpio_request(10, NULL); |
| gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ |
| gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ |
| |
| /* card detect pin for MMC slot (CN7) */ |
| gpio_request_one(41, GPIOF_IN, NULL); |
| |
| /* setup FSI2 port B (HDMI) */ |
| gpio_request(GPIO_FN_FSIBCK, NULL); |
| __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ |
| |
| /* set SPU2 clock to 119.6 MHz */ |
| clk = clk_get(NULL, "spu_clk"); |
| if (!IS_ERR(clk)) { |
| clk_set_rate(clk, clk_round_rate(clk, 119600000)); |
| clk_put(clk); |
| } |
| |
| /* |
| * set irq priority, to avoid sound chopping |
| * when NFS rootfs is used |
| * FSI(3) > SMSC911X(2) |
| */ |
| intc_set_priority(IRQ_FSI, 3); |
| |
| i2c_register_board_info(0, i2c0_devices, |
| ARRAY_SIZE(i2c0_devices)); |
| |
| i2c_register_board_info(1, i2c1_devices, |
| ARRAY_SIZE(i2c1_devices)); |
| |
| #ifdef CONFIG_AP4EVB_QHD |
| |
| /* |
| * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and |
| * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON. |
| */ |
| |
| /* enable KEYSC */ |
| gpio_request(GPIO_FN_KEYOUT0, NULL); |
| gpio_request(GPIO_FN_KEYOUT1, NULL); |
| gpio_request(GPIO_FN_KEYOUT2, NULL); |
| gpio_request(GPIO_FN_KEYOUT3, NULL); |
| gpio_request(GPIO_FN_KEYOUT4, NULL); |
| gpio_request(GPIO_FN_KEYIN0_136, NULL); |
| gpio_request(GPIO_FN_KEYIN1_135, NULL); |
| gpio_request(GPIO_FN_KEYIN2_134, NULL); |
| gpio_request(GPIO_FN_KEYIN3_133, NULL); |
| gpio_request(GPIO_FN_KEYIN4, NULL); |
| |
| /* enable TouchScreen */ |
| irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); |
| |
| tsc_device.irq = IRQ28; |
| i2c_register_board_info(1, &tsc_device, 1); |
| |
| /* LCDC0 */ |
| lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; |
| lcdc_info.ch[0].interface_type = RGB24; |
| lcdc_info.ch[0].clock_divider = 1; |
| lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; |
| lcdc_info.ch[0].panel_cfg.width = 44; |
| lcdc_info.ch[0].panel_cfg.height = 79; |
| |
| platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices)); |
| |
| #else |
| /* |
| * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and |
| * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF. |
| */ |
| |
| gpio_request(GPIO_FN_LCDD17, NULL); |
| gpio_request(GPIO_FN_LCDD16, NULL); |
| gpio_request(GPIO_FN_LCDD15, NULL); |
| gpio_request(GPIO_FN_LCDD14, NULL); |
| gpio_request(GPIO_FN_LCDD13, NULL); |
| gpio_request(GPIO_FN_LCDD12, NULL); |
| gpio_request(GPIO_FN_LCDD11, NULL); |
| gpio_request(GPIO_FN_LCDD10, NULL); |
| gpio_request(GPIO_FN_LCDD9, NULL); |
| gpio_request(GPIO_FN_LCDD8, NULL); |
| gpio_request(GPIO_FN_LCDD7, NULL); |
| gpio_request(GPIO_FN_LCDD6, NULL); |
| gpio_request(GPIO_FN_LCDD5, NULL); |
| gpio_request(GPIO_FN_LCDD4, NULL); |
| gpio_request(GPIO_FN_LCDD3, NULL); |
| gpio_request(GPIO_FN_LCDD2, NULL); |
| gpio_request(GPIO_FN_LCDD1, NULL); |
| gpio_request(GPIO_FN_LCDD0, NULL); |
| gpio_request(GPIO_FN_LCDDISP, NULL); |
| gpio_request(GPIO_FN_LCDDCK, NULL); |
| |
| gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */ |
| gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ |
| |
| lcdc_info.clock_source = LCDC_CLK_BUS; |
| lcdc_info.ch[0].interface_type = RGB18; |
| lcdc_info.ch[0].clock_divider = 3; |
| lcdc_info.ch[0].flags = 0; |
| lcdc_info.ch[0].panel_cfg.width = 152; |
| lcdc_info.ch[0].panel_cfg.height = 91; |
| |
| /* enable TouchScreen */ |
| irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); |
| |
| tsc_device.irq = IRQ7; |
| i2c_register_board_info(0, &tsc_device, 1); |
| #endif /* CONFIG_AP4EVB_QHD */ |
| |
| /* CEU */ |
| |
| /* |
| * TODO: reserve memory for V4L2 DMA buffers, when a suitable API |
| * becomes available |
| */ |
| |
| /* MIPI-CSI stuff */ |
| clk = clk_get(NULL, "vck1_clk"); |
| if (!IS_ERR(clk)) { |
| clk_set_rate(clk, clk_round_rate(clk, 13000000)); |
| clk_enable(clk); |
| clk_put(clk); |
| } |
| |
| sh7372_add_standard_devices(); |
| |
| /* HDMI */ |
| gpio_request(GPIO_FN_HDMI_HPD, NULL); |
| gpio_request(GPIO_FN_HDMI_CEC, NULL); |
| |
| /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ |
| #define SRCR4 IOMEM(0xe61580bc) |
| srcr4 = __raw_readl(SRCR4); |
| __raw_writel(srcr4 | (1 << 13), SRCR4); |
| udelay(50); |
| __raw_writel(srcr4 & ~(1 << 13), SRCR4); |
| |
| platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); |
| |
| rmobile_add_devices_to_domains(domain_devices, |
| ARRAY_SIZE(domain_devices)); |
| |
| hdmi_init_pm_clock(); |
| sh7372_pm_init(); |
| pm_clk_add(&fsi_device.dev, "spu2"); |
| pm_clk_add(&lcdc1_device.dev, "hdmi"); |
| } |
| |
| MACHINE_START(AP4EVB, "ap4evb") |
| .map_io = sh7372_map_io, |
| .init_early = sh7372_add_early_devices, |
| .init_irq = sh7372_init_irq, |
| .handle_irq = shmobile_handle_irq_intc, |
| .init_machine = ap4evb_init, |
| .init_late = sh7372_pm_init_late, |
| .init_time = sh7372_earlytimer_init, |
| MACHINE_END |