Blackfin arch: Do not pollute name space used in linux-2.6.x/sound
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/include/asm-blackfin/mach-bf527/defBF52x_base.h
index d6c24c54..fc69cf9 100644
--- a/include/asm-blackfin/mach-bf527/defBF52x_base.h
+++ b/include/asm-blackfin/mach-bf527/defBF52x_base.h
@@ -1718,55 +1718,55 @@
/* Bit masks for HOST_CONTROL */
-#define HOST_EN 0x1 /* Host Enable */
-#define nHOST_EN 0x0
-#define HOST_END 0x2 /* Host Endianess */
-#define nHOST_END 0x0
-#define DATA_SIZE 0x4 /* Data Size */
-#define nDATA_SIZE 0x0
-#define HOST_RST 0x8 /* Host Reset */
-#define nHOST_RST 0x0
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define nHRDY_OVR 0x0
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define nINT_MODE 0x0
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define nBT_EN 0x0
-#define EHW 0x100 /* Enable Host Write */
-#define nEHW 0x0
-#define EHR 0x200 /* Enable Host Read */
-#define nEHR 0x0
-#define BDR 0x400 /* Burst DMA Requests */
-#define nBDR 0x0
+#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
+#define HOST_CNTR_nHOST_EN 0x0
+#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
+#define HOST_CNTR_nHOST_END 0x0
+#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
+#define HOST_CNTR_nDATA_SIZE 0x0
+#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
+#define HOST_CNTR_nHOST_RST 0x0
+#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
+#define HOST_CNTR_nHRDY_OVR 0x0
+#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
+#define HOST_CNTR_nINT_MODE 0x0
+#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
+#define HOST_CNTR_ nBT_EN 0x0
+#define HOST_CNTR_EHW 0x100 /* Enable Host Write */
+#define HOST_CNTR_nEHW 0x0
+#define HOST_CNTR_EHR 0x200 /* Enable Host Read */
+#define HOST_CNTR_nEHR 0x0
+#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
+#define HOST_CNTR_nBDR 0x0
/* Bit masks for HOST_STATUS */
-#define READY 0x1 /* DMA Ready */
-#define nREADY 0x0
-#define FIFOFULL 0x2 /* FIFO Full */
-#define nFIFOFULL 0x0
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define nFIFOEMPTY 0x0
-#define COMPLETE 0x8 /* DMA Complete */
-#define nCOMPLETE 0x0
-#define HSHK 0x10 /* Host Handshake */
-#define nHSHK 0x0
-#define TIMEOUT 0x20 /* Host Timeout */
-#define nTIMEOUT 0x0
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define nHIRQ 0x0
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define nALLOW_CNFG 0x0
-#define DMA_DIR 0x100 /* DMA Direction */
-#define nDMA_DIR 0x0
-#define BTE 0x200 /* Bus Timeout Enabled */
-#define nBTE 0x0
-#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
-#define nHOSTRD_DONE 0x0
+#define HOST_STAT_READY 0x1 /* DMA Ready */
+#define HOST_STAT_nREADY 0x0
+#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
+#define HOST_STAT_nFIFOFULL 0x0
+#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
+#define HOST_STAT_nFIFOEMPTY 0x0
+#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
+#define HOST_STAT_nCOMPLETE 0x0
+#define HOST_STAT_HSHK 0x10 /* Host Handshake */
+#define HOST_STAT_nHSHK 0x0
+#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
+#define HOST_STAT_nTIMEOUT 0x0
+#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
+#define HOST_STAT_nHIRQ 0x0
+#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
+#define HOST_STAT_nALLOW_CNFG 0x0
+#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
+#define HOST_STAT_nDMA_DIR 0x0
+#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
+#define HOST_STAT_nBTE 0x0
+#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
+#define HOST_STAT_nHOSTRD_DONE 0x0
/* Bit masks for HOST_TIMEOUT */
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
+#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
/* Bit masks for CNT_CONFIG */