[SCSI] scsi_debug: add LBPRZ support
Add LBPRZ support to scsi_debug; i.e. read zeros for
unmapped blocks.
Rather than checking for unmapped blocks at
read time, this just zeroes them on the backing store
at unmap time so it behaves the same way.
This also adds a module parameter to disable it.
lbprz, "unmapped blocks return 0 on read (def=1)"
[jejb: fix whitespace errors]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 8917154..e4ba924 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -101,6 +101,7 @@
#define DEF_LBPU 0
#define DEF_LBPWS 0
#define DEF_LBPWS10 0
+#define DEF_LBPRZ 1
#define DEF_LOWEST_ALIGNED 0
#define DEF_NO_LUN_0 0
#define DEF_NUM_PARTS 0
@@ -186,6 +187,7 @@
static unsigned int scsi_debug_lbpu = DEF_LBPU;
static unsigned int scsi_debug_lbpws = DEF_LBPWS;
static unsigned int scsi_debug_lbpws10 = DEF_LBPWS10;
+static unsigned int scsi_debug_lbprz = DEF_LBPRZ;
static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
@@ -775,7 +777,7 @@
return 0x3c;
}
-/* Thin provisioning VPD page (SBC-3) */
+/* Logical block provisioning VPD page (SBC-3) */
static int inquiry_evpd_b2(unsigned char *arr)
{
memset(arr, 0, 0x8);
@@ -790,6 +792,9 @@
if (scsi_debug_lbpws10)
arr[1] |= 1 << 5;
+ if (scsi_debug_lbprz)
+ arr[1] |= 1 << 2;
+
return 0x8;
}
@@ -1071,8 +1076,11 @@
arr[13] = scsi_debug_physblk_exp & 0xf;
arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
- if (scsi_debug_lbp())
+ if (scsi_debug_lbp()) {
arr[14] |= 0x80; /* LBPME */
+ if (scsi_debug_lbprz)
+ arr[14] |= 0x40; /* LBPRZ */
+ }
arr[15] = scsi_debug_lowest_aligned & 0xff;
@@ -2046,10 +2054,13 @@
block = lba + alignment;
rem = do_div(block, granularity);
- if (rem == 0 && lba + granularity <= end &&
- block < map_size)
+ if (rem == 0 && lba + granularity <= end && block < map_size) {
clear_bit(block, map_storep);
-
+ if (scsi_debug_lbprz)
+ memset(fake_storep +
+ block * scsi_debug_sector_size, 0,
+ scsi_debug_sector_size);
+ }
lba += granularity - rem;
}
}
@@ -2731,6 +2742,7 @@
module_param_named(lbpu, scsi_debug_lbpu, int, S_IRUGO);
module_param_named(lbpws, scsi_debug_lbpws, int, S_IRUGO);
module_param_named(lbpws10, scsi_debug_lbpws10, int, S_IRUGO);
+module_param_named(lbprz, scsi_debug_lbprz, int, S_IRUGO);
module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR);
module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR);
@@ -2772,6 +2784,7 @@
MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
+MODULE_PARM_DESC(lbprz, "unmapped blocks return 0 on read (def=1)");
MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to 255(def))");