iwlwifi: split the drivers for agn and legacy devices 3945/4965

Intel WiFi devices 3945 and 4965 now have their own driver in the folder

	drivers/net/wireless/iwlegacy

Add support to build these drivers independently of the driver for
AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko,
and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko
contains code shared between both devices.

The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3
ABGN device.

Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
new file mode 100644
index 0000000..ef94d16
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -0,0 +1,4294 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/ieee80211_radiotap.h>
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#define DRV_NAME	"iwl3945"
+
+#include "iwl-fh.h"
+#include "iwl-3945-fh.h"
+#include "iwl-commands.h"
+#include "iwl-sta.h"
+#include "iwl-3945.h"
+#include "iwl-core.h"
+#include "iwl-helpers.h"
+#include "iwl-dev.h"
+#include "iwl-spectrum.h"
+
+/*
+ * module name, copyright, version, etc.
+ */
+
+#define DRV_DESCRIPTION	\
+"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+/*
+ * add "s" to indicate spectrum measurement included.
+ * we add it here to be consistent with previous releases in which
+ * this was configurable.
+ */
+#define DRV_VERSION  IWLWIFI_VERSION VD "s"
+#define DRV_COPYRIGHT	"Copyright(c) 2003-2011 Intel Corporation"
+#define DRV_AUTHOR     "<ilw@linux.intel.com>"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+
+ /* module parameters */
+struct iwl_mod_params iwl3945_mod_params = {
+	.sw_crypto = 1,
+	.restart_fw = 1,
+	/* the rest are 0 by default */
+};
+
+/**
+ * iwl3945_get_antenna_flags - Get antenna flags for RXON command
+ * @priv: eeprom and antenna fields are used to determine antenna flags
+ *
+ * priv->eeprom39  is used to determine if antenna AUX/MAIN are reversed
+ * iwl3945_mod_params.antenna specifies the antenna diversity mode:
+ *
+ * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
+ * IWL_ANTENNA_MAIN      - Force MAIN antenna
+ * IWL_ANTENNA_AUX       - Force AUX antenna
+ */
+__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
+{
+	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
+
+	switch (iwl3945_mod_params.antenna) {
+	case IWL_ANTENNA_DIVERSITY:
+		return 0;
+
+	case IWL_ANTENNA_MAIN:
+		if (eeprom->antenna_switch_type)
+			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+
+	case IWL_ANTENNA_AUX:
+		if (eeprom->antenna_switch_type)
+			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+	}
+
+	/* bad antenna selector value */
+	IWL_ERR(priv, "Bad antenna selector value (0x%x)\n",
+		iwl3945_mod_params.antenna);
+
+	return 0;		/* "diversity" is default if error */
+}
+
+static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
+				   struct ieee80211_key_conf *keyconf,
+				   u8 sta_id)
+{
+	unsigned long flags;
+	__le16 key_flags = 0;
+	int ret;
+
+	key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
+	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+
+	if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
+		key_flags |= STA_KEY_MULTICAST_MSK;
+
+	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+	keyconf->hw_key_idx = keyconf->keyidx;
+	key_flags &= ~STA_KEY_FLG_INVALID;
+
+	spin_lock_irqsave(&priv->sta_lock, flags);
+	priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
+	priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
+	memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
+	       keyconf->keylen);
+
+	memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
+	       keyconf->keylen);
+
+	if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
+			== STA_KEY_FLG_NO_ENC)
+		priv->stations[sta_id].sta.key.key_offset =
+				 iwl_legacy_get_free_ucode_key_index(priv);
+	/* else, we are overriding an existing key => no need to allocated room
+	* in uCode. */
+
+	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+		"no space for a new key");
+
+	priv->stations[sta_id].sta.key.key_flags = key_flags;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+	IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
+
+	ret = iwl_legacy_send_add_sta(priv,
+				&priv->stations[sta_id].sta, CMD_ASYNC);
+
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+	return ret;
+}
+
+static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv,
+				  struct ieee80211_key_conf *keyconf,
+				  u8 sta_id)
+{
+	return -EOPNOTSUPP;
+}
+
+static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv,
+				  struct ieee80211_key_conf *keyconf,
+				  u8 sta_id)
+{
+	return -EOPNOTSUPP;
+}
+
+static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id)
+{
+	unsigned long flags;
+	struct iwl_legacy_addsta_cmd sta_cmd;
+
+	spin_lock_irqsave(&priv->sta_lock, flags);
+	memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key));
+	memset(&priv->stations[sta_id].sta.key, 0,
+		sizeof(struct iwl4965_keyinfo));
+	priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_legacy_addsta_cmd));
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+	IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
+	return iwl_legacy_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+}
+
+static int iwl3945_set_dynamic_key(struct iwl_priv *priv,
+			struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+	int ret = 0;
+
+	keyconf->hw_key_idx = HW_KEY_DYNAMIC;
+
+	switch (keyconf->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id);
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id);
+		break;
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id);
+		break;
+	default:
+		IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__,
+			keyconf->cipher);
+		ret = -EINVAL;
+	}
+
+	IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
+		      keyconf->cipher, keyconf->keylen, keyconf->keyidx,
+		      sta_id, ret);
+
+	return ret;
+}
+
+static int iwl3945_remove_static_key(struct iwl_priv *priv)
+{
+	int ret = -EOPNOTSUPP;
+
+	return ret;
+}
+
+static int iwl3945_set_static_key(struct iwl_priv *priv,
+				struct ieee80211_key_conf *key)
+{
+	if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+	    key->cipher == WLAN_CIPHER_SUITE_WEP104)
+		return -EOPNOTSUPP;
+
+	IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher);
+	return -EINVAL;
+}
+
+static void iwl3945_clear_free_frames(struct iwl_priv *priv)
+{
+	struct list_head *element;
+
+	IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
+		       priv->frames_count);
+
+	while (!list_empty(&priv->free_frames)) {
+		element = priv->free_frames.next;
+		list_del(element);
+		kfree(list_entry(element, struct iwl3945_frame, list));
+		priv->frames_count--;
+	}
+
+	if (priv->frames_count) {
+		IWL_WARN(priv, "%d frames still in use.  Did we lose one?\n",
+			    priv->frames_count);
+		priv->frames_count = 0;
+	}
+}
+
+static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv)
+{
+	struct iwl3945_frame *frame;
+	struct list_head *element;
+	if (list_empty(&priv->free_frames)) {
+		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+		if (!frame) {
+			IWL_ERR(priv, "Could not allocate frame!\n");
+			return NULL;
+		}
+
+		priv->frames_count++;
+		return frame;
+	}
+
+	element = priv->free_frames.next;
+	list_del(element);
+	return list_entry(element, struct iwl3945_frame, list);
+}
+
+static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame)
+{
+	memset(frame, 0, sizeof(*frame));
+	list_add(&frame->list, &priv->free_frames);
+}
+
+unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
+				struct ieee80211_hdr *hdr,
+				int left)
+{
+
+	if (!iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS) || !priv->beacon_skb)
+		return 0;
+
+	if (priv->beacon_skb->len > left)
+		return 0;
+
+	memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
+
+	return priv->beacon_skb->len;
+}
+
+static int iwl3945_send_beacon_cmd(struct iwl_priv *priv)
+{
+	struct iwl3945_frame *frame;
+	unsigned int frame_size;
+	int rc;
+	u8 rate;
+
+	frame = iwl3945_get_free_frame(priv);
+
+	if (!frame) {
+		IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
+			  "command.\n");
+		return -ENOMEM;
+	}
+
+	rate = iwl_legacy_get_lowest_plcp(priv,
+				&priv->contexts[IWL_RXON_CTX_BSS]);
+
+	frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
+
+	rc = iwl_legacy_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
+			      &frame->u.cmd[0]);
+
+	iwl3945_free_frame(priv, frame);
+
+	return rc;
+}
+
+static void iwl3945_unset_hw_params(struct iwl_priv *priv)
+{
+	if (priv->_3945.shared_virt)
+		dma_free_coherent(&priv->pci_dev->dev,
+				  sizeof(struct iwl3945_shared),
+				  priv->_3945.shared_virt,
+				  priv->_3945.shared_phys);
+}
+
+static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
+				      struct ieee80211_tx_info *info,
+				      struct iwl_device_cmd *cmd,
+				      struct sk_buff *skb_frag,
+				      int sta_id)
+{
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
+
+	tx_cmd->sec_ctl = 0;
+
+	switch (keyinfo->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+		memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
+		IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
+		break;
+
+	case WLAN_CIPHER_SUITE_TKIP:
+		break;
+
+	case WLAN_CIPHER_SUITE_WEP104:
+		tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+		/* fall through */
+	case WLAN_CIPHER_SUITE_WEP40:
+		tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
+		    (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
+
+		memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
+
+		IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
+			     "with key %d\n", info->control.hw_key->hw_key_idx);
+		break;
+
+	default:
+		IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher);
+		break;
+	}
+}
+
+/*
+ * handle build REPLY_TX command notification.
+ */
+static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
+				  struct iwl_device_cmd *cmd,
+				  struct ieee80211_tx_info *info,
+				  struct ieee80211_hdr *hdr, u8 std_id)
+{
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	__le32 tx_flags = tx_cmd->tx_flags;
+	__le16 fc = hdr->frame_control;
+
+	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+		tx_flags |= TX_CMD_FLG_ACK_MSK;
+		if (ieee80211_is_mgmt(fc))
+			tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+		if (ieee80211_is_probe_resp(fc) &&
+		    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
+			tx_flags |= TX_CMD_FLG_TSF_MSK;
+	} else {
+		tx_flags &= (~TX_CMD_FLG_ACK_MSK);
+		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+	}
+
+	tx_cmd->sta_id = std_id;
+	if (ieee80211_has_morefrags(fc))
+		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
+
+	if (ieee80211_is_data_qos(fc)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tx_cmd->tid_tspec = qc[0] & 0xf;
+		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
+	} else {
+		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+	}
+
+	iwl_legacy_tx_cmd_protection(priv, info, fc, &tx_flags);
+
+	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
+	if (ieee80211_is_mgmt(fc)) {
+		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
+		else
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
+	} else {
+		tx_cmd->timeout.pm_frame_timeout = 0;
+	}
+
+	tx_cmd->driver_txop = 0;
+	tx_cmd->tx_flags = tx_flags;
+	tx_cmd->next_frame_len = 0;
+}
+
+/*
+ * start REPLY_TX command process
+ */
+static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct iwl3945_tx_cmd *tx_cmd;
+	struct iwl_tx_queue *txq = NULL;
+	struct iwl_queue *q = NULL;
+	struct iwl_device_cmd *out_cmd;
+	struct iwl_cmd_meta *out_meta;
+	dma_addr_t phys_addr;
+	dma_addr_t txcmd_phys;
+	int txq_id = skb_get_queue_mapping(skb);
+	u16 len, idx, hdr_len;
+	u8 id;
+	u8 unicast;
+	u8 sta_id;
+	u8 tid = 0;
+	__le16 fc;
+	u8 wait_write_ptr = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (iwl_legacy_is_rfkill(priv)) {
+		IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
+		goto drop_unlock;
+	}
+
+	if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) {
+		IWL_ERR(priv, "ERROR: No TX rate available.\n");
+		goto drop_unlock;
+	}
+
+	unicast = !is_multicast_ether_addr(hdr->addr1);
+	id = 0;
+
+	fc = hdr->frame_control;
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	if (ieee80211_is_auth(fc))
+		IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
+	else if (ieee80211_is_assoc_req(fc))
+		IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
+	else if (ieee80211_is_reassoc_req(fc))
+		IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
+#endif
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	hdr_len = ieee80211_hdrlen(fc);
+
+	/* Find index into station table for destination station */
+	sta_id = iwl_legacy_sta_id_or_broadcast(
+			priv, &priv->contexts[IWL_RXON_CTX_BSS],
+			info->control.sta);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+			       hdr->addr1);
+		goto drop;
+	}
+
+	IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id);
+
+	if (ieee80211_is_data_qos(fc)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+		if (unlikely(tid >= MAX_TID_COUNT))
+			goto drop;
+	}
+
+	/* Descriptor for chosen Tx queue */
+	txq = &priv->txq[txq_id];
+	q = &txq->q;
+
+	if ((iwl_legacy_queue_space(q) < q->high_mark))
+		goto drop;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	idx = iwl_legacy_get_cmd_index(q, q->write_ptr, 0);
+
+	/* Set up driver data for this TFD */
+	memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
+	txq->txb[q->write_ptr].skb = skb;
+	txq->txb[q->write_ptr].ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	/* Init first empty entry in queue's array of Tx/cmd buffers */
+	out_cmd = txq->cmd[idx];
+	out_meta = &txq->meta[idx];
+	tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
+	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
+	memset(tx_cmd, 0, sizeof(*tx_cmd));
+
+	/*
+	 * Set up the Tx-command (not MAC!) header.
+	 * Store the chosen Tx queue and TFD index within the sequence field;
+	 * after Tx, uCode's Tx response will return this value so driver can
+	 * locate the frame within the tx queue and do post-tx processing.
+	 */
+	out_cmd->hdr.cmd = REPLY_TX;
+	out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
+				INDEX_TO_SEQ(q->write_ptr)));
+
+	/* Copy MAC header from skb into command buffer */
+	memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+
+	if (info->control.hw_key)
+		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
+
+	/* TODO need this for burst mode later on */
+	iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
+
+	/* set is_hcca to 0; it probably will never be implemented */
+	iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
+
+	/* Total # bytes to be transmitted */
+	len = (u16)skb->len;
+	tx_cmd->len = cpu_to_le16(len);
+
+	iwl_legacy_dbg_log_tx_data_frame(priv, len, hdr);
+	iwl_legacy_update_stats(priv, true, fc, len);
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+
+	if (!ieee80211_has_morefrags(hdr->frame_control)) {
+		txq->need_update = 1;
+	} else {
+		wait_write_ptr = 1;
+		txq->need_update = 0;
+	}
+
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
+		     le16_to_cpu(out_cmd->hdr.sequence));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
+	iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
+	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
+			   ieee80211_hdrlen(fc));
+
+	/*
+	 * Use the first empty entry in this queue's command buffer array
+	 * to contain the Tx command and MAC header concatenated together
+	 * (payload data will be in another buffer).
+	 * Size of this varies, due to varying MAC header length.
+	 * If end is not dword aligned, we'll have 2 extra bytes at the end
+	 * of the MAC header (device reads on dword boundaries).
+	 * We'll tell device about this padding later.
+	 */
+	len = sizeof(struct iwl3945_tx_cmd) +
+			sizeof(struct iwl_cmd_header) + hdr_len;
+	len = (len + 3) & ~3;
+
+	/* Physical address of this Tx command's header (not MAC header!),
+	 * within command buffer array. */
+	txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+				    len, PCI_DMA_TODEVICE);
+	/* we do not map meta data ... so we can safely access address to
+	 * provide to unmap command*/
+	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
+	dma_unmap_len_set(out_meta, len, len);
+
+	/* Add buffer containing Tx command and MAC(!) header to TFD's
+	 * first entry */
+	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
+						   txcmd_phys, len, 1, 0);
+
+
+	/* Set up TFD's 2nd entry to point directly to remainder of skb,
+	 * if any (802.11 null frames have no payload). */
+	len = skb->len - hdr_len;
+	if (len) {
+		phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
+					   len, PCI_DMA_TODEVICE);
+		priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
+							   phys_addr, len,
+							   0, U32_PAD(len));
+	}
+
+
+	/* Tell device the write index *just past* this latest filled TFD */
+	q->write_ptr = iwl_legacy_queue_inc_wrap(q->write_ptr, q->n_bd);
+	iwl_legacy_txq_update_write_ptr(priv, txq);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if ((iwl_legacy_queue_space(q) < q->high_mark)
+	    && priv->mac80211_registered) {
+		if (wait_write_ptr) {
+			spin_lock_irqsave(&priv->lock, flags);
+			txq->need_update = 1;
+			iwl_legacy_txq_update_write_ptr(priv, txq);
+			spin_unlock_irqrestore(&priv->lock, flags);
+		}
+
+		iwl_legacy_stop_queue(priv, txq);
+	}
+
+	return 0;
+
+drop_unlock:
+	spin_unlock_irqrestore(&priv->lock, flags);
+drop:
+	return -1;
+}
+
+static int iwl3945_get_measurement(struct iwl_priv *priv,
+			       struct ieee80211_measurement_params *params,
+			       u8 type)
+{
+	struct iwl_spectrum_cmd spectrum;
+	struct iwl_rx_packet *pkt;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
+		.data = (void *)&spectrum,
+		.flags = CMD_WANT_SKB,
+	};
+	u32 add_time = le64_to_cpu(params->start_time);
+	int rc;
+	int spectrum_resp_status;
+	int duration = le16_to_cpu(params->duration);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	if (iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS))
+		add_time = iwl_legacy_usecs_to_beacons(priv,
+			le64_to_cpu(params->start_time) - priv->_3945.last_tsf,
+			le16_to_cpu(ctx->timing.beacon_interval));
+
+	memset(&spectrum, 0, sizeof(spectrum));
+
+	spectrum.channel_count = cpu_to_le16(1);
+	spectrum.flags =
+	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
+	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
+	cmd.len = sizeof(spectrum);
+	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
+
+	if (iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS))
+		spectrum.start_time =
+			iwl_legacy_add_beacon_time(priv,
+				priv->_3945.last_beacon_time, add_time,
+				le16_to_cpu(ctx->timing.beacon_interval));
+	else
+		spectrum.start_time = 0;
+
+	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
+	spectrum.channels[0].channel = params->channel;
+	spectrum.channels[0].type = type;
+	if (ctx->active.flags & RXON_FLG_BAND_24G_MSK)
+		spectrum.flags |= RXON_FLG_BAND_24G_MSK |
+		    RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
+
+	rc = iwl_legacy_send_cmd_sync(priv, &cmd);
+	if (rc)
+		return rc;
+
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
+		IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
+		rc = -EIO;
+	}
+
+	spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
+	switch (spectrum_resp_status) {
+	case 0:		/* Command will be handled */
+		if (pkt->u.spectrum.id != 0xff) {
+			IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
+						pkt->u.spectrum.id);
+			priv->measurement_status &= ~MEASUREMENT_READY;
+		}
+		priv->measurement_status |= MEASUREMENT_ACTIVE;
+		rc = 0;
+		break;
+
+	case 1:		/* Command will not be handled */
+		rc = -EAGAIN;
+		break;
+	}
+
+	iwl_legacy_free_pages(priv, cmd.reply_page);
+
+	return rc;
+}
+
+static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
+			       struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_alive_resp *palive;
+	struct delayed_work *pwork;
+
+	palive = &pkt->u.alive_frame;
+
+	IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
+		       "0x%01X 0x%01X\n",
+		       palive->is_valid, palive->ver_type,
+		       palive->ver_subtype);
+
+	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
+		IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
+		memcpy(&priv->card_alive_init, &pkt->u.alive_frame,
+		       sizeof(struct iwl_alive_resp));
+		pwork = &priv->init_alive_start;
+	} else {
+		IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
+		memcpy(&priv->card_alive, &pkt->u.alive_frame,
+		       sizeof(struct iwl_alive_resp));
+		pwork = &priv->alive_start;
+		iwl3945_disable_events(priv);
+	}
+
+	/* We delay the ALIVE response by 5ms to
+	 * give the HW RF Kill time to activate... */
+	if (palive->is_valid == UCODE_VALID_OK)
+		queue_delayed_work(priv->workqueue, pwork,
+				   msecs_to_jiffies(5));
+	else
+		IWL_WARN(priv, "uCode did not respond OK.\n");
+}
+
+static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv,
+				 struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+#endif
+
+	IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
+}
+
+static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
+				struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	u8 rate = beacon->beacon_notify_hdr.rate;
+
+	IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
+		"tsf %d %d rate %d\n",
+		le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
+		beacon->beacon_notify_hdr.failure_frame,
+		le32_to_cpu(beacon->ibss_mgr_status),
+		le32_to_cpu(beacon->high_tsf),
+		le32_to_cpu(beacon->low_tsf), rate);
+#endif
+
+	priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+
+}
+
+/* Handle notification from uCode that card's power state is changing
+ * due to software, hardware, or critical temperature RFKILL */
+static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
+				    struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
+	unsigned long status = priv->status;
+
+	IWL_WARN(priv, "Card state received: HW:%s SW:%s\n",
+			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
+			  (flags & SW_CARD_DISABLED) ? "Kill" : "On");
+
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
+		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	if (flags & HW_CARD_DISABLED)
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+	else
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+
+
+	iwl_legacy_scan_cancel(priv);
+
+	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
+	     test_bit(STATUS_RF_KILL_HW, &priv->status)))
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+				test_bit(STATUS_RF_KILL_HW, &priv->status));
+	else
+		wake_up_interruptible(&priv->wait_command_queue);
+}
+
+/**
+ * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
+ *
+ * Setup the RX handlers for each of the reply types sent from the uCode
+ * to the host.
+ *
+ * This function chains into the hardware specific files for them to setup
+ * any hardware specific handlers as well.
+ */
+static void iwl3945_setup_rx_handlers(struct iwl_priv *priv)
+{
+	priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
+	priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
+	priv->rx_handlers[REPLY_ERROR] = iwl_legacy_rx_reply_error;
+	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_legacy_rx_csa;
+	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
+			iwl_legacy_rx_spectrum_measure_notif;
+	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_legacy_rx_pm_sleep_notif;
+	priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
+	    iwl_legacy_rx_pm_debug_statistics_notif;
+	priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
+
+	/*
+	 * The same handler is used for both the REPLY to a discrete
+	 * statistics request from the host as well as for the periodic
+	 * statistics notifications (after received beacons) from the uCode.
+	 */
+	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics;
+	priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
+
+	iwl_legacy_setup_rx_scan_handlers(priv);
+	priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
+
+	/* Set up hardware specific Rx handlers */
+	iwl3945_hw_rx_handler_setup(priv);
+}
+
+/************************** RX-FUNCTIONS ****************************/
+/*
+ * Rx theory of operation
+ *
+ * The host allocates 32 DMA target addresses and passes the host address
+ * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
+ * 0 to 31
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two index registers for managing the Rx buffers.
+ *
+ * The READ index maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ index is managed by the firmware once the card is enabled.
+ *
+ * The WRITE index maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * INDEX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ index
+ * and fire the RX interrupt.  The driver can then query the READ index and
+ * process as many packets as possible, moving the WRITE index forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
+ *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ *   to replenish the iwl->rxq->rx_free.
+ * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
+ *   iwl->rxq is replenished and the READ INDEX is updated (updating the
+ *   'processed' and 'read' driver indexes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ *   detached from the iwl->rxq.  The driver 'processed' index is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ *   INDEX is not incremented and iwl->status(RX_STALLED) is set.  If there
+ *   were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * iwl3945_rx_replenish()     Replenishes rx_free list from rx_used, and calls
+ *                            iwl3945_rx_queue_restock
+ * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
+ *                            queue, updates firmware pointers, and updates
+ *                            the WRITE index.  If insufficient rx_free buffers
+ *                            are available, schedules iwl3945_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - iwl3945_rx()         Detach iwl_rx_mem_buffers from pool up to the
+ *                            READ INDEX, detaching the SKB from the pool.
+ *                            Moves the packet buffer from queue to rx_used.
+ *                            Calls iwl3945_rx_queue_restock to refill any empty
+ *                            slots.
+ * ...
+ *
+ */
+
+/**
+ * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv,
+					  dma_addr_t dma_addr)
+{
+	return cpu_to_le32((u32)dma_addr);
+}
+
+/**
+ * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' index forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+static void iwl3945_rx_queue_restock(struct iwl_priv *priv)
+{
+	struct iwl_rx_queue *rxq = &priv->rxq;
+	struct list_head *element;
+	struct iwl_rx_mem_buffer *rxb;
+	unsigned long flags;
+	int write;
+
+	spin_lock_irqsave(&rxq->lock, flags);
+	write = rxq->write & ~0x7;
+	while ((iwl_legacy_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+		/* Get next free Rx buffer, remove from free list */
+		element = rxq->rx_free.next;
+		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+
+		/* Point to Rx buffer via next RBD in circular buffer */
+		rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma);
+		rxq->queue[rxq->write] = rxb;
+		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+		rxq->free_count--;
+	}
+	spin_unlock_irqrestore(&rxq->lock, flags);
+	/* If the pre-allocated buffer pool is dropping low, schedule to
+	 * refill it */
+	if (rxq->free_count <= RX_LOW_WATERMARK)
+		queue_work(priv->workqueue, &priv->rx_replenish);
+
+
+	/* If we've added more space for the firmware to place data, tell it.
+	 * Increment device's write pointer in multiples of 8. */
+	if ((rxq->write_actual != (rxq->write & ~0x7))
+	    || (abs(rxq->write - rxq->read) > 7)) {
+		spin_lock_irqsave(&rxq->lock, flags);
+		rxq->need_update = 1;
+		spin_unlock_irqrestore(&rxq->lock, flags);
+		iwl_legacy_rx_queue_update_write_ptr(priv, rxq);
+	}
+}
+
+/**
+ * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via iwl3945_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
+{
+	struct iwl_rx_queue *rxq = &priv->rxq;
+	struct list_head *element;
+	struct iwl_rx_mem_buffer *rxb;
+	struct page *page;
+	unsigned long flags;
+	gfp_t gfp_mask = priority;
+
+	while (1) {
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			return;
+		}
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		if (rxq->free_count > RX_LOW_WATERMARK)
+			gfp_mask |= __GFP_NOWARN;
+
+		if (priv->hw_params.rx_page_order > 0)
+			gfp_mask |= __GFP_COMP;
+
+		/* Alloc a new receive buffer */
+		page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
+		if (!page) {
+			if (net_ratelimit())
+				IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+			    net_ratelimit())
+				IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+					 priority == GFP_ATOMIC ?  "GFP_ATOMIC" : "GFP_KERNEL",
+					 rxq->free_count);
+			/* We don't reschedule replenish work here -- we will
+			 * call the restock method and if it still needs
+			 * more buffers it will schedule replenish */
+			break;
+		}
+
+		spin_lock_irqsave(&rxq->lock, flags);
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			__free_pages(page, priv->hw_params.rx_page_order);
+			return;
+		}
+		element = rxq->rx_used.next;
+		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		rxb->page = page;
+		/* Get physical address of RB/SKB */
+		rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		list_add_tail(&rxb->list, &rxq->rx_free);
+		rxq->free_count++;
+		priv->alloc_rxb_page++;
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+	}
+}
+
+void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+	unsigned long flags;
+	int i;
+	spin_lock_irqsave(&rxq->lock, flags);
+	INIT_LIST_HEAD(&rxq->rx_free);
+	INIT_LIST_HEAD(&rxq->rx_used);
+	/* Fill the rx_used queue with _all_ of the Rx buffers */
+	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+		/* In the reset function, these buffers may have been allocated
+		 * to an SKB, so we need to unmap and free potential storage */
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			__iwl_legacy_free_pages(priv, rxq->pool[i].page);
+			rxq->pool[i].page = NULL;
+		}
+		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+	}
+
+	/* Set us so that we have processed and used all buffers, but have
+	 * not restocked the Rx queue with fresh buffers */
+	rxq->read = rxq->write = 0;
+	rxq->write_actual = 0;
+	rxq->free_count = 0;
+	spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
+void iwl3945_rx_replenish(void *data)
+{
+	struct iwl_priv *priv = data;
+	unsigned long flags;
+
+	iwl3945_rx_allocate(priv, GFP_KERNEL);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl3945_rx_queue_restock(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void iwl3945_rx_replenish_now(struct iwl_priv *priv)
+{
+	iwl3945_rx_allocate(priv, GFP_ATOMIC);
+
+	iwl3945_rx_queue_restock(priv);
+}
+
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+	int i;
+	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			__iwl_legacy_free_pages(priv, rxq->pool[i].page);
+			rxq->pool[i].page = NULL;
+		}
+	}
+
+	dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			  rxq->bd_dma);
+	dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
+			  rxq->rb_stts, rxq->rb_stts_dma);
+	rxq->bd = NULL;
+	rxq->rb_stts  = NULL;
+}
+
+
+/* Convert linear signal-to-noise ratio into dB */
+static u8 ratio2dB[100] = {
+/*	 0   1   2   3   4   5   6   7   8   9 */
+	 0,  0,  6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
+	20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
+	26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
+	29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
+	32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
+	34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
+	36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
+	37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
+	38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
+	39, 39, 39, 39, 39, 40, 40, 40, 40, 40  /* 90 - 99 */
+};
+
+/* Calculates a relative dB value from a ratio of linear
+ *   (i.e. not dB) signal levels.
+ * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
+int iwl3945_calc_db_from_ratio(int sig_ratio)
+{
+	/* 1000:1 or higher just report as 60 dB */
+	if (sig_ratio >= 1000)
+		return 60;
+
+	/* 100:1 or higher, divide by 10 and use table,
+	 *   add 20 dB to make up for divide by 10 */
+	if (sig_ratio >= 100)
+		return 20 + (int)ratio2dB[sig_ratio/10];
+
+	/* We shouldn't see this */
+	if (sig_ratio < 1)
+		return 0;
+
+	/* Use table for ratios 1:1 - 99:1 */
+	return (int)ratio2dB[sig_ratio];
+}
+
+/**
+ * iwl3945_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the priv->rx_handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+static void iwl3945_rx_handle(struct iwl_priv *priv)
+{
+	struct iwl_rx_mem_buffer *rxb;
+	struct iwl_rx_packet *pkt;
+	struct iwl_rx_queue *rxq = &priv->rxq;
+	u32 r, i;
+	int reclaim;
+	unsigned long flags;
+	u8 fill_rx = 0;
+	u32 count = 8;
+	int total_empty = 0;
+
+	/* uCode's read index (stored in shared DRAM) indicates the last Rx
+	 * buffer that the driver may process (last buffer filled by ucode). */
+	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
+	i = rxq->read;
+
+	/* calculate total frames need to be restock after handling RX */
+	total_empty = r - rxq->write_actual;
+	if (total_empty < 0)
+		total_empty += RX_QUEUE_SIZE;
+
+	if (total_empty > (RX_QUEUE_SIZE / 2))
+		fill_rx = 1;
+	/* Rx interrupt, but nothing sent from uCode */
+	if (i == r)
+		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
+
+	while (i != r) {
+		int len;
+
+		rxb = rxq->queue[i];
+
+		/* If an RXB doesn't have a Rx queue slot associated with it,
+		 * then a bug has been introduced in the queue refilling
+		 * routines -- catch it here */
+		BUG_ON(rxb == NULL);
+
+		rxq->queue[i] = NULL;
+
+		pci_unmap_page(priv->pci_dev, rxb->page_dma,
+			       PAGE_SIZE << priv->hw_params.rx_page_order,
+			       PCI_DMA_FROMDEVICE);
+		pkt = rxb_addr(rxb);
+
+		len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+		len += sizeof(u32); /* account for status word */
+		trace_iwlwifi_legacy_dev_rx(priv, pkt, len);
+
+		/* Reclaim a command buffer only if this packet is a response
+		 *   to a (driver-originated) command.
+		 * If the packet (e.g. Rx frame) originated from uCode,
+		 *   there is no command buffer to reclaim.
+		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+		 *   but apparently a few don't get set; catch them here. */
+		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+			(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
+			(pkt->hdr.cmd != REPLY_TX);
+
+		/* Based on type of command response or notification,
+		 *   handle those that need handling via function in
+		 *   rx_handlers table.  See iwl3945_setup_rx_handlers() */
+		if (priv->rx_handlers[pkt->hdr.cmd]) {
+			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
+			iwl_legacy_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
+			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
+		} else {
+			/* No handling needed */
+			IWL_DEBUG_RX(priv,
+				"r %d i %d No handler needed for %s, 0x%02x\n",
+				r, i, iwl_legacy_get_cmd_string(pkt->hdr.cmd),
+				pkt->hdr.cmd);
+		}
+
+		/*
+		 * XXX: After here, we should always check rxb->page
+		 * against NULL before touching it or its virtual
+		 * memory (pkt). Because some rx_handler might have
+		 * already taken or freed the pages.
+		 */
+
+		if (reclaim) {
+			/* Invoke any callbacks, transfer the buffer to caller,
+			 * and fire off the (possibly) blocking iwl_legacy_send_cmd()
+			 * as we reclaim the driver command queue */
+			if (rxb->page)
+				iwl_legacy_tx_cmd_complete(priv, rxb);
+			else
+				IWL_WARN(priv, "Claim null rxb?\n");
+		}
+
+		/* Reuse the page if possible. For notification packets and
+		 * SKBs that fail to Rx correctly, add them back into the
+		 * rx_free list for reuse later. */
+		spin_lock_irqsave(&rxq->lock, flags);
+		if (rxb->page != NULL) {
+			rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
+				0, PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		} else
+			list_add_tail(&rxb->list, &rxq->rx_used);
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		i = (i + 1) & RX_QUEUE_MASK;
+		/* If there are a lot of unused frames,
+		 * restock the Rx queue so ucode won't assert. */
+		if (fill_rx) {
+			count++;
+			if (count >= 8) {
+				rxq->read = i;
+				iwl3945_rx_replenish_now(priv);
+				count = 0;
+			}
+		}
+	}
+
+	/* Backtrack one entry */
+	rxq->read = i;
+	if (fill_rx)
+		iwl3945_rx_replenish_now(priv);
+	else
+		iwl3945_rx_queue_restock(priv);
+}
+
+/* call this function to flush any scheduled tasklet */
+static inline void iwl3945_synchronize_irq(struct iwl_priv *priv)
+{
+	/* wait to make sure we flush pending tasklet*/
+	synchronize_irq(priv->pci_dev->irq);
+	tasklet_kill(&priv->irq_tasklet);
+}
+
+static const char *iwl3945_desc_lookup(int i)
+{
+	switch (i) {
+	case 1:
+		return "FAIL";
+	case 2:
+		return "BAD_PARAM";
+	case 3:
+		return "BAD_CHECKSUM";
+	case 4:
+		return "NMI_INTERRUPT";
+	case 5:
+		return "SYSASSERT";
+	case 6:
+		return "FATAL_ERROR";
+	}
+
+	return "UNKNOWN";
+}
+
+#define ERROR_START_OFFSET  (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
+
+void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
+{
+	u32 i;
+	u32 desc, time, count, base, data1;
+	u32 blink1, blink2, ilink1, ilink2;
+
+	base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
+
+	if (!iwl3945_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
+		return;
+	}
+
+
+	count = iwl_legacy_read_targ_mem(priv, base);
+
+	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+		IWL_ERR(priv, "Start IWL Error Log Dump:\n");
+		IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
+			priv->status, count);
+	}
+
+	IWL_ERR(priv, "Desc       Time       asrtPC  blink2 "
+		  "ilink1  nmiPC   Line\n");
+	for (i = ERROR_START_OFFSET;
+	     i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
+	     i += ERROR_ELEM_SIZE) {
+		desc = iwl_legacy_read_targ_mem(priv, base + i);
+		time =
+		    iwl_legacy_read_targ_mem(priv, base + i + 1 * sizeof(u32));
+		blink1 =
+		    iwl_legacy_read_targ_mem(priv, base + i + 2 * sizeof(u32));
+		blink2 =
+		    iwl_legacy_read_targ_mem(priv, base + i + 3 * sizeof(u32));
+		ilink1 =
+		    iwl_legacy_read_targ_mem(priv, base + i + 4 * sizeof(u32));
+		ilink2 =
+		    iwl_legacy_read_targ_mem(priv, base + i + 5 * sizeof(u32));
+		data1 =
+		    iwl_legacy_read_targ_mem(priv, base + i + 6 * sizeof(u32));
+
+		IWL_ERR(priv,
+			"%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
+			iwl3945_desc_lookup(desc), desc, time, blink1, blink2,
+			ilink1, ilink2, data1);
+		trace_iwlwifi_legacy_dev_ucode_error(priv, desc, time, data1, 0,
+					0, blink1, blink2, ilink1, ilink2);
+	}
+}
+
+#define EVENT_START_OFFSET  (6 * sizeof(u32))
+
+/**
+ * iwl3945_print_event_log - Dump error event log to syslog
+ *
+ */
+static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
+				  u32 num_events, u32 mode,
+				  int pos, char **buf, size_t bufsz)
+{
+	u32 i;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 event_size;	/* 2 u32s, or 3 u32s if timestamp recorded */
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
+
+	if (num_events == 0)
+		return pos;
+
+	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+	if (mode == 0)
+		event_size = 2 * sizeof(u32);
+	else
+		event_size = 3 * sizeof(u32);
+
+	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+
+	/* Set starting address; reads will auto-increment */
+	_iwl_legacy_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
+	rmb();
+
+	/* "time" is actually "data" for mode 0 (no timestamp).
+	 * place event id # at far right for easier visual parsing. */
+	for (i = 0; i < num_events; i++) {
+		ev = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		time = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		if (mode == 0) {
+			/* data, ev */
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"0x%08x:%04u\n",
+						time, ev);
+			} else {
+				IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
+				trace_iwlwifi_legacy_dev_ucode_event(priv, 0,
+							      time, ev);
+			}
+		} else {
+			data = _iwl_legacy_read_direct32(priv,
+							HBUS_TARG_MEM_RDAT);
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"%010u:0x%08x:%04u\n",
+						 time, data, ev);
+			} else {
+				IWL_ERR(priv, "%010u\t0x%08x\t%04u\n",
+					time, data, ev);
+				trace_iwlwifi_legacy_dev_ucode_event(priv, time,
+							      data, ev);
+			}
+		}
+	}
+
+	/* Allow device to power down */
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return pos;
+}
+
+/**
+ * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog
+ */
+static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
+				      u32 num_wraps, u32 next_entry,
+				      u32 size, u32 mode,
+				      int pos, char **buf, size_t bufsz)
+{
+	/*
+	 * display the newest DEFAULT_LOG_ENTRIES entries
+	 * i.e the entries just before the next ont that uCode would fill.
+	 */
+	if (num_wraps) {
+		if (next_entry < size) {
+			pos = iwl3945_print_event_log(priv,
+					     capacity - (size - next_entry),
+					     size - next_entry, mode,
+					     pos, buf, bufsz);
+			pos = iwl3945_print_event_log(priv, 0,
+						      next_entry, mode,
+						      pos, buf, bufsz);
+		} else
+			pos = iwl3945_print_event_log(priv, next_entry - size,
+						      size, mode,
+						      pos, buf, bufsz);
+	} else {
+		if (next_entry < size)
+			pos = iwl3945_print_event_log(priv, 0,
+						      next_entry, mode,
+						      pos, buf, bufsz);
+		else
+			pos = iwl3945_print_event_log(priv, next_entry - size,
+						      size, mode,
+						      pos, buf, bufsz);
+	}
+	return pos;
+}
+
+#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20)
+
+int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
+			    char **buf, bool display)
+{
+	u32 base;       /* SRAM byte address of event log header */
+	u32 capacity;   /* event log capacity in # entries */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+	u32 size;       /* # entries that we'll print */
+	int pos = 0;
+	size_t bufsz = 0;
+
+	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+	if (!iwl3945_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
+		return  -EINVAL;
+	}
+
+	/* event log header */
+	capacity = iwl_legacy_read_targ_mem(priv, base);
+	mode = iwl_legacy_read_targ_mem(priv, base + (1 * sizeof(u32)));
+	num_wraps = iwl_legacy_read_targ_mem(priv, base + (2 * sizeof(u32)));
+	next_entry = iwl_legacy_read_targ_mem(priv, base + (3 * sizeof(u32)));
+
+	if (capacity > priv->cfg->base_params->max_event_log_size) {
+		IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
+			capacity, priv->cfg->base_params->max_event_log_size);
+		capacity = priv->cfg->base_params->max_event_log_size;
+	}
+
+	if (next_entry > priv->cfg->base_params->max_event_log_size) {
+		IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
+			next_entry, priv->cfg->base_params->max_event_log_size);
+		next_entry = priv->cfg->base_params->max_event_log_size;
+	}
+
+	size = num_wraps ? capacity : next_entry;
+
+	/* bail out if nothing in log */
+	if (size == 0) {
+		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
+		return pos;
+	}
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	if (!(iwl_legacy_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
+		size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
+			? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
+#else
+	size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
+		? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
+#endif
+
+	IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n",
+		  size);
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	if (display) {
+		if (full_log)
+			bufsz = capacity * 48;
+		else
+			bufsz = size * 48;
+		*buf = kmalloc(bufsz, GFP_KERNEL);
+		if (!*buf)
+			return -ENOMEM;
+	}
+	if ((iwl_legacy_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
+		/* if uCode has wrapped back to top of log,
+		 * start at the oldest entry,
+		 * i.e the next one that uCode would fill.
+		 */
+		if (num_wraps)
+			pos = iwl3945_print_event_log(priv, next_entry,
+						capacity - next_entry, mode,
+						pos, buf, bufsz);
+
+		/* (then/else) start at top of log */
+		pos = iwl3945_print_event_log(priv, 0, next_entry, mode,
+					      pos, buf, bufsz);
+	} else
+		pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
+						    next_entry, size, mode,
+						    pos, buf, bufsz);
+#else
+	pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
+					    next_entry, size, mode,
+					    pos, buf, bufsz);
+#endif
+	return pos;
+}
+
+static void iwl3945_irq_tasklet(struct iwl_priv *priv)
+{
+	u32 inta, handled = 0;
+	u32 inta_fh;
+	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	u32 inta_mask;
+#endif
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Ack/clear/reset pending uCode interrupts.
+	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
+	inta = iwl_read32(priv, CSR_INT);
+	iwl_write32(priv, CSR_INT, inta);
+
+	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
+	 * Any new interrupts that happen after this, either while we're
+	 * in this tasklet, or later, will show up in next ISR/tasklet. */
+	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+	iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	if (iwl_legacy_get_debug_level(priv) & IWL_DL_ISR) {
+		/* just for debug */
+		inta_mask = iwl_read32(priv, CSR_INT_MASK);
+		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+			      inta, inta_mask, inta_fh);
+	}
+#endif
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
+	 * atomic, make sure that inta covers all the interrupts that
+	 * we've discovered, even if FH interrupt came in just after
+	 * reading CSR_INT. */
+	if (inta_fh & CSR39_FH_INT_RX_MASK)
+		inta |= CSR_INT_BIT_FH_RX;
+	if (inta_fh & CSR39_FH_INT_TX_MASK)
+		inta |= CSR_INT_BIT_FH_TX;
+
+	/* Now service all interrupt bits discovered above. */
+	if (inta & CSR_INT_BIT_HW_ERR) {
+		IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
+
+		/* Tell the device to stop sending interrupts */
+		iwl_legacy_disable_interrupts(priv);
+
+		priv->isr_stats.hw++;
+		iwl_legacy_irq_handle_error(priv);
+
+		handled |= CSR_INT_BIT_HW_ERR;
+
+		return;
+	}
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	if (iwl_legacy_get_debug_level(priv) & (IWL_DL_ISR)) {
+		/* NIC fires this, but we don't use it, redundant with WAKEUP */
+		if (inta & CSR_INT_BIT_SCD) {
+			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
+				      "the frame/frames.\n");
+			priv->isr_stats.sch++;
+		}
+
+		/* Alive notification via Rx interrupt will do the real work */
+		if (inta & CSR_INT_BIT_ALIVE) {
+			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+			priv->isr_stats.alive++;
+		}
+	}
+#endif
+	/* Safely ignore these bits for debug checks below */
+	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+	/* Error detected by uCode */
+	if (inta & CSR_INT_BIT_SW_ERR) {
+		IWL_ERR(priv, "Microcode SW error detected. "
+			"Restarting 0x%X.\n", inta);
+		priv->isr_stats.sw++;
+		iwl_legacy_irq_handle_error(priv);
+		handled |= CSR_INT_BIT_SW_ERR;
+	}
+
+	/* uCode wakes up after power-down sleep */
+	if (inta & CSR_INT_BIT_WAKEUP) {
+		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
+		iwl_legacy_rx_queue_update_write_ptr(priv, &priv->rxq);
+		iwl_legacy_txq_update_write_ptr(priv, &priv->txq[0]);
+		iwl_legacy_txq_update_write_ptr(priv, &priv->txq[1]);
+		iwl_legacy_txq_update_write_ptr(priv, &priv->txq[2]);
+		iwl_legacy_txq_update_write_ptr(priv, &priv->txq[3]);
+		iwl_legacy_txq_update_write_ptr(priv, &priv->txq[4]);
+		iwl_legacy_txq_update_write_ptr(priv, &priv->txq[5]);
+
+		priv->isr_stats.wakeup++;
+		handled |= CSR_INT_BIT_WAKEUP;
+	}
+
+	/* All uCode command responses, including Tx command responses,
+	 * Rx "responses" (frame-received notification), and other
+	 * notifications from uCode come through here*/
+	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+		iwl3945_rx_handle(priv);
+		priv->isr_stats.rx++;
+		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+	}
+
+	if (inta & CSR_INT_BIT_FH_TX) {
+		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		priv->isr_stats.tx++;
+
+		iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
+		iwl_legacy_write_direct32(priv, FH39_TCSR_CREDIT
+					(FH39_SRVC_CHNL), 0x0);
+		handled |= CSR_INT_BIT_FH_TX;
+	}
+
+	if (inta & ~handled) {
+		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		priv->isr_stats.unhandled++;
+	}
+
+	if (inta & ~priv->inta_mask) {
+		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
+			 inta & ~priv->inta_mask);
+		IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
+	}
+
+	/* Re-enable all interrupts */
+	/* only Re-enable if disabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status))
+		iwl_legacy_enable_interrupts(priv);
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	if (iwl_legacy_get_debug_level(priv) & (IWL_DL_ISR)) {
+		inta = iwl_read32(priv, CSR_INT);
+		inta_mask = iwl_read32(priv, CSR_INT_MASK);
+		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+		IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
+	}
+#endif
+}
+
+static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
+					       struct ieee80211_vif *vif,
+					       enum ieee80211_band band,
+					       struct iwl3945_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added = 0;
+	u8 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_legacy_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+
+	channel = iwl_legacy_get_single_channel_number(priv, band);
+
+	if (channel) {
+		scan_ch->channel = channel;
+		scan_ch->type = 0;	/* passive */
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->tpc.dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
+static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
+					 enum ieee80211_band band,
+				     u8 is_active, u8 n_probes,
+				     struct iwl3945_scan_channel *scan_ch,
+				     struct ieee80211_vif *vif)
+{
+	struct ieee80211_channel *chan;
+	const struct ieee80211_supported_band *sband;
+	const struct iwl_channel_info *ch_info;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added, i;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband)
+		return 0;
+
+	active_dwell = iwl_legacy_get_active_dwell_time(priv, band, n_probes);
+	passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+		chan = priv->scan_request->channels[i];
+
+		if (chan->band != band)
+			continue;
+
+		scan_ch->channel = chan->hw_value;
+
+		ch_info = iwl_legacy_get_channel_info(priv, band,
+							scan_ch->channel);
+		if (!iwl_legacy_is_channel_valid(ch_info)) {
+			IWL_DEBUG_SCAN(priv,
+				"Channel %d is INVALID for this band.\n",
+			       scan_ch->channel);
+			continue;
+		}
+
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* If passive , set up for auto-switch
+		 *  and use long active_dwell time.
+		 */
+		if (!is_active || iwl_legacy_is_channel_passive(ch_info) ||
+		    (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+			scan_ch->type = 0;	/* passive */
+			if (IWL_UCODE_API(priv->ucode_ver) == 1)
+				scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
+		} else {
+			scan_ch->type = 1;	/* active */
+		}
+
+		/* Set direct probe bits. These may be used both for active
+		 * scan channels (probes gets sent right away),
+		 * or for passive channels (probes get se sent only after
+		 * hearing clear Rx packet).*/
+		if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
+			if (n_probes)
+				scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
+		} else {
+			/* uCode v1 does not allow setting direct probe bits on
+			 * passive channel. */
+			if ((scan_ch->type & 1) && n_probes)
+				scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
+		}
+
+		/* Set txpower levels to defaults */
+		scan_ch->tpc.dsp_atten = 110;
+		/* scan_pwr_info->tpc.dsp_atten; */
+
+		/*scan_pwr_info->tpc.tx_gain; */
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else {
+			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+			 * power level:
+			 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
+			 */
+		}
+
+		IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n",
+			       scan_ch->channel,
+			       (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
+			       (scan_ch->type & 1) ?
+			       active_dwell : passive_dwell);
+
+		scan_ch++;
+		added++;
+	}
+
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
+	return added;
+}
+
+static void iwl3945_init_hw_rates(struct iwl_priv *priv,
+			      struct ieee80211_rate *rates)
+{
+	int i;
+
+	for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
+		rates[i].bitrate = iwl3945_rates[i].ieee * 5;
+		rates[i].hw_value = i; /* Rate scaling will work on indexes */
+		rates[i].hw_value_short = i;
+		rates[i].flags = 0;
+		if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
+			/*
+			 * If CCK != 1M then set short preamble rate flag.
+			 */
+			rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
+				0 : IEEE80211_RATE_SHORT_PREAMBLE;
+		}
+	}
+}
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv)
+{
+	iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_code);
+	iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_data);
+	iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+	iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_init);
+	iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
+	iwl_legacy_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
+}
+
+/**
+ * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
+ *     looking at all data.
+ */
+static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len)
+{
+	u32 val;
+	u32 save_len = len;
+	int rc = 0;
+	u32 errcnt;
+
+	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
+
+	iwl_legacy_write_direct32(priv, HBUS_TARG_MEM_RADDR,
+			       IWL39_RTC_INST_LOWER_BOUND);
+
+	errcnt = 0;
+	for (; len > 0; len -= sizeof(u32), image++) {
+		/* read data comes through single port, auto-incr addr */
+		/* NOTE: Use the debugless read so we don't flood kernel log
+		 * if IWL_DL_IO is set */
+		val = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image)) {
+			IWL_ERR(priv, "uCode INST section is invalid at "
+				  "offset 0x%x, is 0x%x, s/b 0x%x\n",
+				  save_len - len, val, le32_to_cpu(*image));
+			rc = -EIO;
+			errcnt++;
+			if (errcnt >= 20)
+				break;
+		}
+	}
+
+
+	if (!errcnt)
+		IWL_DEBUG_INFO(priv,
+			"ucode image in INSTRUCTION memory is good\n");
+
+	return rc;
+}
+
+
+/**
+ * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
+ *   using sample data 100 bytes apart.  If these sample points are good,
+ *   it's a pretty good bet that everything between them is good, too.
+ */
+static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
+{
+	u32 val;
+	int rc = 0;
+	u32 errcnt = 0;
+	u32 i;
+
+	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
+
+	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
+		/* read data comes through single port, auto-incr addr */
+		/* NOTE: Use the debugless read so we don't flood kernel log
+		 * if IWL_DL_IO is set */
+		iwl_legacy_write_direct32(priv, HBUS_TARG_MEM_RADDR,
+			i + IWL39_RTC_INST_LOWER_BOUND);
+		val = _iwl_legacy_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image)) {
+#if 0 /* Enable this if you want to see details */
+			IWL_ERR(priv, "uCode INST section is invalid at "
+				  "offset 0x%x, is 0x%x, s/b 0x%x\n",
+				  i, val, *image);
+#endif
+			rc = -EIO;
+			errcnt++;
+			if (errcnt >= 3)
+				break;
+		}
+	}
+
+	return rc;
+}
+
+
+/**
+ * iwl3945_verify_ucode - determine which instruction image is in SRAM,
+ *    and verify its contents
+ */
+static int iwl3945_verify_ucode(struct iwl_priv *priv)
+{
+	__le32 *image;
+	u32 len;
+	int rc = 0;
+
+	/* Try bootstrap */
+	image = (__le32 *)priv->ucode_boot.v_addr;
+	len = priv->ucode_boot.len;
+	rc = iwl3945_verify_inst_sparse(priv, image, len);
+	if (rc == 0) {
+		IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	/* Try initialize */
+	image = (__le32 *)priv->ucode_init.v_addr;
+	len = priv->ucode_init.len;
+	rc = iwl3945_verify_inst_sparse(priv, image, len);
+	if (rc == 0) {
+		IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	/* Try runtime/protocol */
+	image = (__le32 *)priv->ucode_code.v_addr;
+	len = priv->ucode_code.len;
+	rc = iwl3945_verify_inst_sparse(priv, image, len);
+	if (rc == 0) {
+		IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
+
+	/* Since nothing seems to match, show first several data entries in
+	 * instruction SRAM, so maybe visual inspection will give a clue.
+	 * Selection of bootstrap image (vs. other images) is arbitrary. */
+	image = (__le32 *)priv->ucode_boot.v_addr;
+	len = priv->ucode_boot.len;
+	rc = iwl3945_verify_inst_full(priv, image, len);
+
+	return rc;
+}
+
+static void iwl3945_nic_start(struct iwl_priv *priv)
+{
+	/* Remove all resets to allow NIC to operate */
+	iwl_write32(priv, CSR_RESET, 0);
+}
+
+#define IWL3945_UCODE_GET(item)						\
+static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\
+{									\
+	return le32_to_cpu(ucode->v1.item);				\
+}
+
+static u32 iwl3945_ucode_get_header_size(u32 api_ver)
+{
+	return 24;
+}
+
+static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode)
+{
+	return (u8 *) ucode->v1.data;
+}
+
+IWL3945_UCODE_GET(inst_size);
+IWL3945_UCODE_GET(data_size);
+IWL3945_UCODE_GET(init_size);
+IWL3945_UCODE_GET(init_data_size);
+IWL3945_UCODE_GET(boot_size);
+
+/**
+ * iwl3945_read_ucode - Read uCode images from disk file.
+ *
+ * Copy into buffers for card to fetch via bus-mastering
+ */
+static int iwl3945_read_ucode(struct iwl_priv *priv)
+{
+	const struct iwl_ucode_header *ucode;
+	int ret = -EINVAL, index;
+	const struct firmware *ucode_raw;
+	/* firmware file name contains uCode/driver compatibility version */
+	const char *name_pre = priv->cfg->fw_name_pre;
+	const unsigned int api_max = priv->cfg->ucode_api_max;
+	const unsigned int api_min = priv->cfg->ucode_api_min;
+	char buf[25];
+	u8 *src;
+	size_t len;
+	u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
+
+	/* Ask kernel firmware_class module to get the boot firmware off disk.
+	 * request_firmware() is synchronous, file is in memory on return. */
+	for (index = api_max; index >= api_min; index--) {
+		sprintf(buf, "%s%u%s", name_pre, index, ".ucode");
+		ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
+		if (ret < 0) {
+			IWL_ERR(priv, "%s firmware file req failed: %d\n",
+				  buf, ret);
+			if (ret == -ENOENT)
+				continue;
+			else
+				goto error;
+		} else {
+			if (index < api_max)
+				IWL_ERR(priv, "Loaded firmware %s, "
+					"which is deprecated. "
+					" Please use API v%u instead.\n",
+					  buf, api_max);
+			IWL_DEBUG_INFO(priv, "Got firmware '%s' file "
+				       "(%zd bytes) from disk\n",
+				       buf, ucode_raw->size);
+			break;
+		}
+	}
+
+	if (ret < 0)
+		goto error;
+
+	/* Make sure that we got at least our header! */
+	if (ucode_raw->size <  iwl3945_ucode_get_header_size(1)) {
+		IWL_ERR(priv, "File size way too small!\n");
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Data from ucode file:  header followed by uCode images */
+	ucode = (struct iwl_ucode_header *)ucode_raw->data;
+
+	priv->ucode_ver = le32_to_cpu(ucode->ver);
+	api_ver = IWL_UCODE_API(priv->ucode_ver);
+	inst_size = iwl3945_ucode_get_inst_size(ucode);
+	data_size = iwl3945_ucode_get_data_size(ucode);
+	init_size = iwl3945_ucode_get_init_size(ucode);
+	init_data_size = iwl3945_ucode_get_init_data_size(ucode);
+	boot_size = iwl3945_ucode_get_boot_size(ucode);
+	src = iwl3945_ucode_get_data(ucode);
+
+	/* api_ver should match the api version forming part of the
+	 * firmware filename ... but we don't check for that and only rely
+	 * on the API version read from firmware header from here on forward */
+
+	if (api_ver < api_min || api_ver > api_max) {
+		IWL_ERR(priv, "Driver unable to support your firmware API. "
+			  "Driver supports v%u, firmware is v%u.\n",
+			  api_max, api_ver);
+		priv->ucode_ver = 0;
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (api_ver != api_max)
+		IWL_ERR(priv, "Firmware has old API version. Expected %u, "
+			  "got %u. New firmware can be obtained "
+			  "from http://www.intellinuxwireless.org.\n",
+			  api_max, api_ver);
+
+	IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
+		IWL_UCODE_MAJOR(priv->ucode_ver),
+		IWL_UCODE_MINOR(priv->ucode_ver),
+		IWL_UCODE_API(priv->ucode_ver),
+		IWL_UCODE_SERIAL(priv->ucode_ver));
+
+	snprintf(priv->hw->wiphy->fw_version,
+		 sizeof(priv->hw->wiphy->fw_version),
+		 "%u.%u.%u.%u",
+		 IWL_UCODE_MAJOR(priv->ucode_ver),
+		 IWL_UCODE_MINOR(priv->ucode_ver),
+		 IWL_UCODE_API(priv->ucode_ver),
+		 IWL_UCODE_SERIAL(priv->ucode_ver));
+
+	IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
+		       priv->ucode_ver);
+	IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
+		       inst_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
+		       data_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
+		       init_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
+		       init_data_size);
+	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
+		       boot_size);
+
+
+	/* Verify size of file vs. image size info in file's header */
+	if (ucode_raw->size != iwl3945_ucode_get_header_size(api_ver) +
+		inst_size + data_size + init_size +
+		init_data_size + boot_size) {
+
+		IWL_DEBUG_INFO(priv,
+			"uCode file size %zd does not match expected size\n",
+			ucode_raw->size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Verify that uCode images will fit in card's SRAM */
+	if (inst_size > IWL39_MAX_INST_SIZE) {
+		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
+			       inst_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	if (data_size > IWL39_MAX_DATA_SIZE) {
+		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
+			       data_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (init_size > IWL39_MAX_INST_SIZE) {
+		IWL_DEBUG_INFO(priv,
+				"uCode init instr len %d too large to fit in\n",
+				init_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (init_data_size > IWL39_MAX_DATA_SIZE) {
+		IWL_DEBUG_INFO(priv,
+				"uCode init data len %d too large to fit in\n",
+				init_data_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (boot_size > IWL39_MAX_BSM_SIZE) {
+		IWL_DEBUG_INFO(priv,
+				"uCode boot instr len %d too large to fit in\n",
+				boot_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Allocate ucode buffers for card's bus-master loading ... */
+
+	/* Runtime instructions and 2 copies of data:
+	 * 1) unmodified from disk
+	 * 2) backup cache for save/restore during power-downs */
+	priv->ucode_code.len = inst_size;
+	iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
+
+	priv->ucode_data.len = data_size;
+	iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
+
+	priv->ucode_data_backup.len = data_size;
+	iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+
+	if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
+	    !priv->ucode_data_backup.v_addr)
+		goto err_pci_alloc;
+
+	/* Initialization instructions and data */
+	if (init_size && init_data_size) {
+		priv->ucode_init.len = init_size;
+		iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
+
+		priv->ucode_init_data.len = init_data_size;
+		iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
+
+		if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
+			goto err_pci_alloc;
+	}
+
+	/* Bootstrap (instructions only, no data) */
+	if (boot_size) {
+		priv->ucode_boot.len = boot_size;
+		iwl_legacy_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
+
+		if (!priv->ucode_boot.v_addr)
+			goto err_pci_alloc;
+	}
+
+	/* Copy images into buffers for card's bus-master reads ... */
+
+	/* Runtime instructions (first block of data in file) */
+	len = inst_size;
+	IWL_DEBUG_INFO(priv,
+		"Copying (but not loading) uCode instr len %zd\n", len);
+	memcpy(priv->ucode_code.v_addr, src, len);
+	src += len;
+
+	IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+		priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
+
+	/* Runtime data (2nd block)
+	 * NOTE:  Copy into backup buffer will be done in iwl3945_up()  */
+	len = data_size;
+	IWL_DEBUG_INFO(priv,
+		"Copying (but not loading) uCode data len %zd\n", len);
+	memcpy(priv->ucode_data.v_addr, src, len);
+	memcpy(priv->ucode_data_backup.v_addr, src, len);
+	src += len;
+
+	/* Initialization instructions (3rd block) */
+	if (init_size) {
+		len = init_size;
+		IWL_DEBUG_INFO(priv,
+			"Copying (but not loading) init instr len %zd\n", len);
+		memcpy(priv->ucode_init.v_addr, src, len);
+		src += len;
+	}
+
+	/* Initialization data (4th block) */
+	if (init_data_size) {
+		len = init_data_size;
+		IWL_DEBUG_INFO(priv,
+			"Copying (but not loading) init data len %zd\n", len);
+		memcpy(priv->ucode_init_data.v_addr, src, len);
+		src += len;
+	}
+
+	/* Bootstrap instructions (5th block) */
+	len = boot_size;
+	IWL_DEBUG_INFO(priv,
+		"Copying (but not loading) boot instr len %zd\n", len);
+	memcpy(priv->ucode_boot.v_addr, src, len);
+
+	/* We have our copies now, allow OS release its copies */
+	release_firmware(ucode_raw);
+	return 0;
+
+ err_pci_alloc:
+	IWL_ERR(priv, "failed to allocate pci memory\n");
+	ret = -ENOMEM;
+	iwl3945_dealloc_ucode_pci(priv);
+
+ err_release:
+	release_firmware(ucode_raw);
+
+ error:
+	return ret;
+}
+
+
+/**
+ * iwl3945_set_ucode_ptrs - Set uCode address location
+ *
+ * Tell initialization uCode where to find runtime uCode.
+ *
+ * BSM registers initially contain pointers to initialization uCode.
+ * We need to replace them to load runtime uCode inst and data,
+ * and to save runtime data when powering down.
+ */
+static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
+{
+	dma_addr_t pinst;
+	dma_addr_t pdata;
+
+	/* bits 31:0 for 3945 */
+	pinst = priv->ucode_code.p_addr;
+	pdata = priv->ucode_data_backup.p_addr;
+
+	/* Tell bootstrap uCode where to find image to load */
+	iwl_legacy_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
+	iwl_legacy_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
+	iwl_legacy_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
+				 priv->ucode_data.len);
+
+	/* Inst byte count must be last to set up, bit 31 signals uCode
+	 *   that all new ptr/size info is in place */
+	iwl_legacy_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
+				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
+
+	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
+
+	return 0;
+}
+
+/**
+ * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
+ *
+ * Called after REPLY_ALIVE notification received from "initialize" uCode.
+ *
+ * Tell "initialize" uCode to go ahead and load the runtime uCode.
+ */
+static void iwl3945_init_alive_start(struct iwl_priv *priv)
+{
+	/* Check alive response for "valid" sign from uCode */
+	if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
+		/* We had an error bringing up the hardware, so take it
+		 * all the way back down so we can try again */
+		IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
+		goto restart;
+	}
+
+	/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
+	 * This is a paranoid check, because we would not have gotten the
+	 * "initialize" alive if code weren't properly loaded.  */
+	if (iwl3945_verify_ucode(priv)) {
+		/* Runtime instruction load was bad;
+		 * take it all the way back down so we can try again */
+		IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
+		goto restart;
+	}
+
+	/* Send pointers to protocol/runtime uCode image ... init code will
+	 * load and launch runtime uCode, which will send us another "Alive"
+	 * notification. */
+	IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
+	if (iwl3945_set_ucode_ptrs(priv)) {
+		/* Runtime instruction load won't happen;
+		 * take it all the way back down so we can try again */
+		IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
+		goto restart;
+	}
+	return;
+
+ restart:
+	queue_work(priv->workqueue, &priv->restart);
+}
+
+/**
+ * iwl3945_alive_start - called after REPLY_ALIVE notification received
+ *                   from protocol/runtime uCode (initialization uCode's
+ *                   Alive gets handled by iwl3945_init_alive_start()).
+ */
+static void iwl3945_alive_start(struct iwl_priv *priv)
+{
+	int thermal_spin = 0;
+	u32 rfkill;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
+
+	if (priv->card_alive.is_valid != UCODE_VALID_OK) {
+		/* We had an error bringing up the hardware, so take it
+		 * all the way back down so we can try again */
+		IWL_DEBUG_INFO(priv, "Alive failed.\n");
+		goto restart;
+	}
+
+	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
+	 * This is a paranoid check, because we would not have gotten the
+	 * "runtime" alive if code weren't properly loaded.  */
+	if (iwl3945_verify_ucode(priv)) {
+		/* Runtime instruction load was bad;
+		 * take it all the way back down so we can try again */
+		IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
+		goto restart;
+	}
+
+	rfkill = iwl_legacy_read_prph(priv, APMG_RFKILL_REG);
+	IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
+
+	if (rfkill & 0x1) {
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+		/* if RFKILL is not on, then wait for thermal
+		 * sensor in adapter to kick in */
+		while (iwl3945_hw_get_temperature(priv) == 0) {
+			thermal_spin++;
+			udelay(10);
+		}
+
+		if (thermal_spin)
+			IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n",
+				       thermal_spin * 10);
+	} else
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+
+	/* After the ALIVE response, we can send commands to 3945 uCode */
+	set_bit(STATUS_ALIVE, &priv->status);
+
+	/* Enable watchdog to monitor the driver tx queues */
+	iwl_legacy_setup_watchdog(priv);
+
+	if (iwl_legacy_is_rfkill(priv))
+		return;
+
+	ieee80211_wake_queues(priv->hw);
+
+	priv->active_rate = IWL_RATES_MASK_3945;
+
+	iwl_legacy_power_update_mode(priv, true);
+
+	if (iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS)) {
+		struct iwl3945_rxon_cmd *active_rxon =
+				(struct iwl3945_rxon_cmd *)(&ctx->active);
+
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	} else {
+		/* Initialize our rx_config data */
+		iwl_legacy_connection_init_rx_config(priv, ctx);
+	}
+
+	/* Configure Bluetooth device coexistence support */
+	iwl_legacy_send_bt_config(priv);
+
+	set_bit(STATUS_READY, &priv->status);
+
+	/* Configure the adapter for unassociated operation */
+	iwl3945_commit_rxon(priv, ctx);
+
+	iwl3945_reg_txpower_periodic(priv);
+
+	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
+	wake_up_interruptible(&priv->wait_command_queue);
+
+	return;
+
+ restart:
+	queue_work(priv->workqueue, &priv->restart);
+}
+
+static void iwl3945_cancel_deferred_work(struct iwl_priv *priv);
+
+static void __iwl3945_down(struct iwl_priv *priv)
+{
+	unsigned long flags;
+	int exit_pending;
+
+	IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
+
+	iwl_legacy_scan_cancel_timeout(priv, 200);
+
+	exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	/* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
+	 * to prevent rearm timer */
+	del_timer_sync(&priv->watchdog);
+
+	/* Station information will now be cleared in device */
+	iwl_legacy_clear_ucode_stations(priv, NULL);
+	iwl_legacy_dealloc_bcast_stations(priv);
+	iwl_legacy_clear_driver_stations(priv);
+
+	/* Unblock any waiting calls */
+	wake_up_interruptible_all(&priv->wait_command_queue);
+
+	/* Wipe out the EXIT_PENDING status bit if we are not actually
+	 * exiting the module */
+	if (!exit_pending)
+		clear_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	/* stop and reset the on-board processor */
+	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+	/* tell the device to stop sending interrupts */
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_legacy_disable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	iwl3945_synchronize_irq(priv);
+
+	if (priv->mac80211_registered)
+		ieee80211_stop_queues(priv->hw);
+
+	/* If we have not previously called iwl3945_init() then
+	 * clear all bits but the RF Kill bits and return */
+	if (!iwl_legacy_is_init(priv)) {
+		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
+					STATUS_RF_KILL_HW |
+			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+					STATUS_GEO_CONFIGURED |
+				test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+					STATUS_EXIT_PENDING;
+		goto exit;
+	}
+
+	/* ...otherwise clear out all the status bits but the RF Kill
+	 * bit and continue taking the NIC down. */
+	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
+				STATUS_RF_KILL_HW |
+			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+				STATUS_GEO_CONFIGURED |
+			test_bit(STATUS_FW_ERROR, &priv->status) <<
+				STATUS_FW_ERROR |
+			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+				STATUS_EXIT_PENDING;
+
+	iwl3945_hw_txq_ctx_stop(priv);
+	iwl3945_hw_rxq_stop(priv);
+
+	/* Power-down device's busmaster DMA clocks */
+	iwl_legacy_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
+	udelay(5);
+
+	/* Stop the device, and put it in low power state */
+	iwl_legacy_apm_stop(priv);
+
+ exit:
+	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
+
+	if (priv->beacon_skb)
+		dev_kfree_skb(priv->beacon_skb);
+	priv->beacon_skb = NULL;
+
+	/* clear out any free frames */
+	iwl3945_clear_free_frames(priv);
+}
+
+static void iwl3945_down(struct iwl_priv *priv)
+{
+	mutex_lock(&priv->mutex);
+	__iwl3945_down(priv);
+	mutex_unlock(&priv->mutex);
+
+	iwl3945_cancel_deferred_work(priv);
+}
+
+#define MAX_HW_RESTARTS 5
+
+static int iwl3945_alloc_bcast_station(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	unsigned long flags;
+	u8 sta_id;
+
+	spin_lock_irqsave(&priv->sta_lock, flags);
+	sta_id = iwl_legacy_prep_station(priv, ctx,
+					iwl_bcast_addr, false, NULL);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Unable to prepare broadcast station\n");
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+		return -EINVAL;
+	}
+
+	priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE;
+	priv->stations[sta_id].used |= IWL_STA_BCAST;
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+	return 0;
+}
+
+static int __iwl3945_up(struct iwl_priv *priv)
+{
+	int rc, i;
+
+	rc = iwl3945_alloc_bcast_station(priv);
+	if (rc)
+		return rc;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
+		return -EIO;
+	}
+
+	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
+		IWL_ERR(priv, "ucode not available for device bring up\n");
+		return -EIO;
+	}
+
+	/* If platform's RF_KILL switch is NOT set to KILL */
+	if (iwl_read32(priv, CSR_GP_CNTRL) &
+				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+	else {
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+		IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
+		return -ENODEV;
+	}
+
+	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+
+	rc = iwl3945_hw_nic_init(priv);
+	if (rc) {
+		IWL_ERR(priv, "Unable to int nic\n");
+		return rc;
+	}
+
+	/* make sure rfkill handshake bits are cleared */
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	/* clear (again), then enable host interrupts */
+	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+	iwl_legacy_enable_interrupts(priv);
+
+	/* really make sure rfkill handshake bits are cleared */
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+	/* Copy original ucode data image from disk into backup cache.
+	 * This will be used to initialize the on-board processor's
+	 * data SRAM for a clean start when the runtime program first loads. */
+	memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
+	       priv->ucode_data.len);
+
+	/* We return success when we resume from suspend and rf_kill is on. */
+	if (test_bit(STATUS_RF_KILL_HW, &priv->status))
+		return 0;
+
+	for (i = 0; i < MAX_HW_RESTARTS; i++) {
+
+		/* load bootstrap state machine,
+		 * load bootstrap program into processor's memory,
+		 * prepare to load the "initialize" uCode */
+		rc = priv->cfg->ops->lib->load_ucode(priv);
+
+		if (rc) {
+			IWL_ERR(priv,
+				"Unable to set up bootstrap uCode: %d\n", rc);
+			continue;
+		}
+
+		/* start card; "initialize" will load runtime ucode */
+		iwl3945_nic_start(priv);
+
+		IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
+
+		return 0;
+	}
+
+	set_bit(STATUS_EXIT_PENDING, &priv->status);
+	__iwl3945_down(priv);
+	clear_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	/* tried to restart and config the device for as long as our
+	 * patience could withstand */
+	IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
+	return -EIO;
+}
+
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void iwl3945_bg_init_alive_start(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, init_alive_start.work);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+	iwl3945_init_alive_start(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl3945_bg_alive_start(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, alive_start.work);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+	iwl3945_alive_start(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+/*
+ * 3945 cannot interrupt driver when hardware rf kill switch toggles;
+ * driver must poll CSR_GP_CNTRL_REG register for change.  This register
+ * *is* readable even when device has been SW_RESET into low power mode
+ * (e.g. during RF KILL).
+ */
+static void iwl3945_rfkill_poll(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, _3945.rfkill_poll.work);
+	bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status);
+	bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL)
+			& CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
+
+	if (new_rfkill != old_rfkill) {
+		if (new_rfkill)
+			set_bit(STATUS_RF_KILL_HW, &priv->status);
+		else
+			clear_bit(STATUS_RF_KILL_HW, &priv->status);
+
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill);
+
+		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+				new_rfkill ? "disable radio" : "enable radio");
+	}
+
+	/* Keep this running, even if radio now enabled.  This will be
+	 * cancelled in mac_start() if system decides to start again */
+	queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
+			   round_jiffies_relative(2 * HZ));
+
+}
+
+int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
+{
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SCAN_CMD,
+		.len = sizeof(struct iwl3945_scan_cmd),
+		.flags = CMD_SIZE_HUGE,
+	};
+	struct iwl3945_scan_cmd *scan;
+	u8 n_probes = 0;
+	enum ieee80211_band band;
+	bool is_active = false;
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!priv->scan_cmd) {
+		priv->scan_cmd = kmalloc(sizeof(struct iwl3945_scan_cmd) +
+					 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+		if (!priv->scan_cmd) {
+			IWL_DEBUG_SCAN(priv, "Fail to allocate scan memory\n");
+			return -ENOMEM;
+		}
+	}
+	scan = priv->scan_cmd;
+	memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+	scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+	scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+	if (iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS)) {
+		u16 interval = 0;
+		u32 extra;
+		u32 suspend_time = 100;
+		u32 scan_suspend_time = 100;
+
+		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
+
+		if (priv->is_internal_short_scan)
+			interval = 0;
+		else
+			interval = vif->bss_conf.beacon_int;
+
+		scan->suspend_time = 0;
+		scan->max_out_time = cpu_to_le32(200 * 1024);
+		if (!interval)
+			interval = suspend_time;
+		/*
+		 * suspend time format:
+		 *  0-19: beacon interval in usec (time before exec.)
+		 * 20-23: 0
+		 * 24-31: number of beacons (suspend between channels)
+		 */
+
+		extra = (suspend_time / interval) << 24;
+		scan_suspend_time = 0xFF0FFFFF &
+		    (extra | ((suspend_time % interval) * 1024));
+
+		scan->suspend_time = cpu_to_le32(scan_suspend_time);
+		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
+			       scan_suspend_time, interval);
+	}
+
+	if (priv->is_internal_short_scan) {
+		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+	} else if (priv->scan_request->n_ssids) {
+		int i, p = 0;
+		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
+		}
+		is_active = true;
+	} else
+		IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
+
+	/* We don't build a direct scan probe request; the uCode will do
+	 * that based on the direct_mask added to each channel entry */
+	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+	scan->tx_cmd.sta_id = priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
+	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	/* flags + rate selection */
+
+	switch (priv->scan_band) {
+	case IEEE80211_BAND_2GHZ:
+		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+		scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
+		band = IEEE80211_BAND_2GHZ;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
+		band = IEEE80211_BAND_5GHZ;
+		break;
+	default:
+		IWL_WARN(priv, "Invalid scan band\n");
+		return -EIO;
+	}
+
+	/*
+	 * If active scaning is requested but a certain channel
+	 * is marked passive, we can do active scanning if we
+	 * detect transmissions.
+	 */
+	scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+					IWL_GOOD_CRC_TH_DISABLED;
+
+	if (!priv->is_internal_short_scan) {
+		scan->tx_cmd.len = cpu_to_le16(
+			iwl_legacy_fill_probe_req(priv,
+				(struct ieee80211_mgmt *)scan->data,
+				vif->addr,
+				priv->scan_request->ie,
+				priv->scan_request->ie_len,
+				IWL_MAX_SCAN_SIZE - sizeof(*scan)));
+	} else {
+		/* use bcast addr, will not be transmitted but must be valid */
+		scan->tx_cmd.len = cpu_to_le16(
+			iwl_legacy_fill_probe_req(priv,
+				(struct ieee80211_mgmt *)scan->data,
+				iwl_bcast_addr, NULL, 0,
+				IWL_MAX_SCAN_SIZE - sizeof(*scan)));
+	}
+	/* select Rx antennas */
+	scan->flags |= iwl3945_get_antenna_flags(priv);
+
+	if (priv->is_internal_short_scan) {
+		scan->channel_count =
+			iwl3945_get_single_channel_for_scan(priv, vif, band,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)]);
+	} else {
+		scan->channel_count =
+			iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
+				(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+	}
+
+	if (scan->channel_count == 0) {
+		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
+		return -EIO;
+	}
+
+	cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+	    scan->channel_count * sizeof(struct iwl3945_scan_channel);
+	cmd.data = scan;
+	scan->len = cpu_to_le16(cmd.len);
+
+	set_bit(STATUS_SCAN_HW, &priv->status);
+	ret = iwl_legacy_send_cmd_sync(priv, &cmd);
+	if (ret)
+		clear_bit(STATUS_SCAN_HW, &priv->status);
+	return ret;
+}
+
+void iwl3945_post_scan(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	/*
+	 * Since setting the RXON may have been deferred while
+	 * performing the scan, fire one off if needed
+	 */
+	if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+		iwl3945_commit_rxon(priv, ctx);
+}
+
+static void iwl3945_bg_restart(struct work_struct *data)
+{
+	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+		struct iwl_rxon_context *ctx;
+		mutex_lock(&priv->mutex);
+		for_each_context(priv, ctx)
+			ctx->vif = NULL;
+		priv->is_open = 0;
+		mutex_unlock(&priv->mutex);
+		iwl3945_down(priv);
+		ieee80211_restart_hw(priv->hw);
+	} else {
+		iwl3945_down(priv);
+
+		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+			return;
+
+		mutex_lock(&priv->mutex);
+		__iwl3945_up(priv);
+		mutex_unlock(&priv->mutex);
+	}
+}
+
+static void iwl3945_bg_rx_replenish(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, rx_replenish);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+	iwl3945_rx_replenish(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+void iwl3945_post_associate(struct iwl_priv *priv)
+{
+	int rc = 0;
+	struct ieee80211_conf *conf = NULL;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	if (!ctx->vif || !priv->is_open)
+		return;
+
+	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
+			ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	iwl_legacy_scan_cancel_timeout(priv, 200);
+
+	conf = iwl_legacy_ieee80211_get_hw_conf(priv->hw);
+
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	iwl3945_commit_rxon(priv, ctx);
+
+	rc = iwl_legacy_send_rxon_timing(priv, ctx);
+	if (rc)
+		IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
+			    "Attempting to continue.\n");
+
+	ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+
+	ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
+
+	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
+			ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int);
+
+	if (ctx->vif->bss_conf.use_short_preamble)
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+		if (ctx->vif->bss_conf.use_short_slot)
+			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+	}
+
+	iwl3945_commit_rxon(priv, ctx);
+
+	switch (ctx->vif->type) {
+	case NL80211_IFTYPE_STATION:
+		iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		iwl3945_send_beacon_cmd(priv);
+		break;
+	default:
+		IWL_ERR(priv, "%s Should not be called in %d mode\n",
+			__func__, ctx->vif->type);
+		break;
+	}
+}
+
+/*****************************************************************************
+ *
+ * mac80211 entry point functions
+ *
+ *****************************************************************************/
+
+#define UCODE_READY_TIMEOUT	(2 * HZ)
+
+static int iwl3945_mac_start(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+	int ret;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	/* we should be verifying the device is ready to be opened */
+	mutex_lock(&priv->mutex);
+
+	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
+	 * ucode filename and max sizes are card-specific. */
+
+	if (!priv->ucode_code.len) {
+		ret = iwl3945_read_ucode(priv);
+		if (ret) {
+			IWL_ERR(priv, "Could not read microcode: %d\n", ret);
+			mutex_unlock(&priv->mutex);
+			goto out_release_irq;
+		}
+	}
+
+	ret = __iwl3945_up(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	if (ret)
+		goto out_release_irq;
+
+	IWL_DEBUG_INFO(priv, "Start UP work.\n");
+
+	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
+	 * mac80211 will not be run successfully. */
+	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+			test_bit(STATUS_READY, &priv->status),
+			UCODE_READY_TIMEOUT);
+	if (!ret) {
+		if (!test_bit(STATUS_READY, &priv->status)) {
+			IWL_ERR(priv,
+				"Wait for START_ALIVE timeout after %dms.\n",
+				jiffies_to_msecs(UCODE_READY_TIMEOUT));
+			ret = -ETIMEDOUT;
+			goto out_release_irq;
+		}
+	}
+
+	/* ucode is running and will send rfkill notifications,
+	 * no need to poll the killswitch state anymore */
+	cancel_delayed_work(&priv->_3945.rfkill_poll);
+
+	priv->is_open = 1;
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
+
+out_release_irq:
+	priv->is_open = 0;
+	IWL_DEBUG_MAC80211(priv, "leave - failed\n");
+	return ret;
+}
+
+static void iwl3945_mac_stop(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!priv->is_open) {
+		IWL_DEBUG_MAC80211(priv, "leave - skip\n");
+		return;
+	}
+
+	priv->is_open = 0;
+
+	iwl3945_down(priv);
+
+	flush_workqueue(priv->workqueue);
+
+	/* start polling the killswitch state again */
+	queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
+			   round_jiffies_relative(2 * HZ));
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
+
+	if (iwl3945_tx_skb(priv, skb))
+		dev_kfree_skb_any(skb);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return NETDEV_TX_OK;
+}
+
+void iwl3945_config_ap(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct ieee80211_vif *vif = ctx->vif;
+	int rc = 0;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* The following should be done only at AP bring up */
+	if (!(iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS))) {
+
+		/* RXON - unassoc (to set timing command) */
+		ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwl3945_commit_rxon(priv, ctx);
+
+		/* RXON Timing */
+		rc = iwl_legacy_send_rxon_timing(priv, ctx);
+		if (rc)
+			IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
+					"Attempting to continue.\n");
+
+		ctx->staging.assoc_id = 0;
+
+		if (vif->bss_conf.use_short_preamble)
+			ctx->staging.flags |=
+				RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			ctx->staging.flags &=
+				~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+		if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+			if (vif->bss_conf.use_short_slot)
+				ctx->staging.flags |=
+					RXON_FLG_SHORT_SLOT_MSK;
+			else
+				ctx->staging.flags &=
+					~RXON_FLG_SHORT_SLOT_MSK;
+		}
+		/* restore RXON assoc */
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		iwl3945_commit_rxon(priv, ctx);
+	}
+	iwl3945_send_beacon_cmd(priv);
+}
+
+static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			       struct ieee80211_vif *vif,
+			       struct ieee80211_sta *sta,
+			       struct ieee80211_key_conf *key)
+{
+	struct iwl_priv *priv = hw->priv;
+	int ret = 0;
+	u8 sta_id = IWL_INVALID_STATION;
+	u8 static_key;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (iwl3945_mod_params.sw_crypto) {
+		IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * To support IBSS RSN, don't program group keys in IBSS, the
+	 * hardware will then not attempt to decrypt the frames.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC &&
+	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		return -EOPNOTSUPP;
+
+	static_key = !iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS);
+
+	if (!static_key) {
+		sta_id = iwl_legacy_sta_id_or_broadcast(
+				priv, &priv->contexts[IWL_RXON_CTX_BSS], sta);
+		if (sta_id == IWL_INVALID_STATION)
+			return -EINVAL;
+	}
+
+	mutex_lock(&priv->mutex);
+	iwl_legacy_scan_cancel_timeout(priv, 100);
+
+	switch (cmd) {
+	case SET_KEY:
+		if (static_key)
+			ret = iwl3945_set_static_key(priv, key);
+		else
+			ret = iwl3945_set_dynamic_key(priv, key, sta_id);
+		IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
+		break;
+	case DISABLE_KEY:
+		if (static_key)
+			ret = iwl3945_remove_static_key(priv);
+		else
+			ret = iwl3945_clear_sta_key_info(priv, sta_id);
+		IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return ret;
+}
+
+static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       struct ieee80211_sta *sta)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl3945_sta_priv *sta_priv = (void *)sta->drv_priv;
+	int ret;
+	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
+	u8 sta_id;
+
+	IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
+			sta->addr);
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+			sta->addr);
+	sta_priv->common.sta_id = IWL_INVALID_STATION;
+
+
+	ret = iwl_legacy_add_station_common(priv,
+				&priv->contexts[IWL_RXON_CTX_BSS],
+				     sta->addr, is_ap, sta, &sta_id);
+	if (ret) {
+		IWL_ERR(priv, "Unable to add station %pM (%d)\n",
+			sta->addr, ret);
+		/* Should we return success if return code is EEXIST ? */
+		mutex_unlock(&priv->mutex);
+		return ret;
+	}
+
+	sta_priv->common.sta_id = sta_id;
+
+	/* Initialize rate scaling */
+	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
+		       sta->addr);
+	iwl3945_rs_rate_init(priv, sta, sta_id);
+	mutex_unlock(&priv->mutex);
+
+	return 0;
+}
+
+static void iwl3945_configure_filter(struct ieee80211_hw *hw,
+				     unsigned int changed_flags,
+				     unsigned int *total_flags,
+				     u64 multicast)
+{
+	struct iwl_priv *priv = hw->priv;
+	__le32 filter_or = 0, filter_nand = 0;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+#define CHK(test, flag)	do { \
+	if (*total_flags & (test))		\
+		filter_or |= (flag);		\
+	else					\
+		filter_nand |= (flag);		\
+	} while (0)
+
+	IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
+			changed_flags, *total_flags);
+
+	CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
+	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
+	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
+
+#undef CHK
+
+	mutex_lock(&priv->mutex);
+
+	ctx->staging.filter_flags &= ~filter_nand;
+	ctx->staging.filter_flags |= filter_or;
+
+	/*
+	 * Not committing directly because hardware can perform a scan,
+	 * but even if hw is ready, committing here breaks for some reason,
+	 * we'll eventually commit the filter flags change anyway.
+	 */
+
+	mutex_unlock(&priv->mutex);
+
+	/*
+	 * Receiving all multicast frames is always enabled by the
+	 * default flags setup in iwl_legacy_connection_init_rx_config()
+	 * since we currently do not support programming multicast
+	 * filters into the device.
+	 */
+	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
+			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t iwl3945_show_debug_level(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	return sprintf(buf, "0x%08X\n", iwl_legacy_get_debug_level(priv));
+}
+static ssize_t iwl3945_store_debug_level(struct device *d,
+				struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 0, &val);
+	if (ret)
+		IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
+	else {
+		priv->debug_level = val;
+		if (iwl_legacy_alloc_traffic_mem(priv))
+			IWL_ERR(priv,
+				"Not enough memory to generate traffic log\n");
+	}
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+			iwl3945_show_debug_level, iwl3945_store_debug_level);
+
+#endif /* CONFIG_IWLWIFI_LEGACY_DEBUG */
+
+static ssize_t iwl3945_show_temperature(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	if (!iwl_legacy_is_alive(priv))
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, iwl3945_show_temperature, NULL);
+
+static ssize_t iwl3945_show_tx_power(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
+}
+
+static ssize_t iwl3945_store_tx_power(struct device *d,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	char *p = (char *)buf;
+	u32 val;
+
+	val = simple_strtoul(p, &p, 10);
+	if (p == buf)
+		IWL_INFO(priv, ": %s is not in decimal form.\n", buf);
+	else
+		iwl3945_hw_reg_set_txpower(priv, val);
+
+	return count;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, iwl3945_show_tx_power, iwl3945_store_tx_power);
+
+static ssize_t iwl3945_show_flags(struct device *d,
+			  struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	return sprintf(buf, "0x%04X\n", ctx->active.flags);
+}
+
+static ssize_t iwl3945_store_flags(struct device *d,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	u32 flags = simple_strtoul(buf, NULL, 0);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	mutex_lock(&priv->mutex);
+	if (le32_to_cpu(ctx->staging.flags) != flags) {
+		/* Cancel any currently running scans... */
+		if (iwl_legacy_scan_cancel_timeout(priv, 100))
+			IWL_WARN(priv, "Could not cancel scan.\n");
+		else {
+			IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
+				       flags);
+			ctx->staging.flags = cpu_to_le32(flags);
+			iwl3945_commit_rxon(priv, ctx);
+		}
+	}
+	mutex_unlock(&priv->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, iwl3945_show_flags, iwl3945_store_flags);
+
+static ssize_t iwl3945_show_filter_flags(struct device *d,
+				 struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	return sprintf(buf, "0x%04X\n",
+		le32_to_cpu(ctx->active.filter_flags));
+}
+
+static ssize_t iwl3945_store_filter_flags(struct device *d,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	u32 filter_flags = simple_strtoul(buf, NULL, 0);
+
+	mutex_lock(&priv->mutex);
+	if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) {
+		/* Cancel any currently running scans... */
+		if (iwl_legacy_scan_cancel_timeout(priv, 100))
+			IWL_WARN(priv, "Could not cancel scan.\n");
+		else {
+			IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
+				       "0x%04X\n", filter_flags);
+			ctx->staging.filter_flags =
+				cpu_to_le32(filter_flags);
+			iwl3945_commit_rxon(priv, ctx);
+		}
+	}
+	mutex_unlock(&priv->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, iwl3945_show_filter_flags,
+		   iwl3945_store_filter_flags);
+
+static ssize_t iwl3945_show_measurement(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct iwl_spectrum_notification measure_report;
+	u32 size = sizeof(measure_report), len = 0, ofs = 0;
+	u8 *data = (u8 *)&measure_report;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!(priv->measurement_status & MEASUREMENT_READY)) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return 0;
+	}
+	memcpy(&measure_report, &priv->measure_report, size);
+	priv->measurement_status = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	while (size && (PAGE_SIZE - len)) {
+		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
+				   PAGE_SIZE - len, 1);
+		len = strlen(buf);
+		if (PAGE_SIZE - len)
+			buf[len++] = '\n';
+
+		ofs += 16;
+		size -= min(size, 16U);
+	}
+
+	return len;
+}
+
+static ssize_t iwl3945_store_measurement(struct device *d,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct ieee80211_measurement_params params = {
+		.channel = le16_to_cpu(ctx->active.channel),
+		.start_time = cpu_to_le64(priv->_3945.last_tsf),
+		.duration = cpu_to_le16(1),
+	};
+	u8 type = IWL_MEASURE_BASIC;
+	u8 buffer[32];
+	u8 channel;
+
+	if (count) {
+		char *p = buffer;
+		strncpy(buffer, buf, min(sizeof(buffer), count));
+		channel = simple_strtoul(p, NULL, 0);
+		if (channel)
+			params.channel = channel;
+
+		p = buffer;
+		while (*p && *p != ' ')
+			p++;
+		if (*p)
+			type = simple_strtoul(p + 1, NULL, 0);
+	}
+
+	IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on "
+		       "channel %d (for '%s')\n", type, params.channel, buf);
+	iwl3945_get_measurement(priv, &params, type);
+
+	return count;
+}
+
+static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
+		   iwl3945_show_measurement, iwl3945_store_measurement);
+
+static ssize_t iwl3945_store_retry_rate(struct device *d,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	priv->retry_rate = simple_strtoul(buf, NULL, 0);
+	if (priv->retry_rate <= 0)
+		priv->retry_rate = 1;
+
+	return count;
+}
+
+static ssize_t iwl3945_show_retry_rate(struct device *d,
+			       struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	return sprintf(buf, "%d", priv->retry_rate);
+}
+
+static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, iwl3945_show_retry_rate,
+		   iwl3945_store_retry_rate);
+
+
+static ssize_t iwl3945_show_channels(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	/* all this shit doesn't belong into sysfs anyway */
+	return 0;
+}
+
+static DEVICE_ATTR(channels, S_IRUSR, iwl3945_show_channels, NULL);
+
+static ssize_t iwl3945_show_antenna(struct device *d,
+			    struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	if (!iwl_legacy_is_alive(priv))
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", iwl3945_mod_params.antenna);
+}
+
+static ssize_t iwl3945_store_antenna(struct device *d,
+			     struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d);
+	int ant;
+
+	if (count == 0)
+		return 0;
+
+	if (sscanf(buf, "%1i", &ant) != 1) {
+		IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n");
+		return count;
+	}
+
+	if ((ant >= 0) && (ant <= 2)) {
+		IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant);
+		iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant;
+	} else
+		IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant);
+
+
+	return count;
+}
+
+static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, iwl3945_show_antenna, iwl3945_store_antenna);
+
+static ssize_t iwl3945_show_status(struct device *d,
+			   struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	if (!iwl_legacy_is_alive(priv))
+		return -EAGAIN;
+	return sprintf(buf, "0x%08x\n", (int)priv->status);
+}
+
+static DEVICE_ATTR(status, S_IRUGO, iwl3945_show_status, NULL);
+
+static ssize_t iwl3945_dump_error_log(struct device *d,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	char *p = (char *)buf;
+
+	if (p[0] == '1')
+		iwl3945_dump_nic_error_log(priv);
+
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, iwl3945_dump_error_log);
+
+/*****************************************************************************
+ *
+ * driver setup and tear down
+ *
+ *****************************************************************************/
+
+static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
+{
+	priv->workqueue = create_singlethread_workqueue(DRV_NAME);
+
+	init_waitqueue_head(&priv->wait_command_queue);
+
+	INIT_WORK(&priv->restart, iwl3945_bg_restart);
+	INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
+	INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
+	INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
+	INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll);
+
+	iwl_legacy_setup_scan_deferred_work(priv);
+
+	iwl3945_hw_setup_deferred_work(priv);
+
+	init_timer(&priv->watchdog);
+	priv->watchdog.data = (unsigned long)priv;
+	priv->watchdog.function = iwl_legacy_bg_watchdog;
+
+	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+		     iwl3945_irq_tasklet, (unsigned long)priv);
+}
+
+static void iwl3945_cancel_deferred_work(struct iwl_priv *priv)
+{
+	iwl3945_hw_cancel_deferred_work(priv);
+
+	cancel_delayed_work_sync(&priv->init_alive_start);
+	cancel_delayed_work(&priv->alive_start);
+
+	iwl_legacy_cancel_scan_deferred_work(priv);
+}
+
+static struct attribute *iwl3945_sysfs_entries[] = {
+	&dev_attr_antenna.attr,
+	&dev_attr_channels.attr,
+	&dev_attr_dump_errors.attr,
+	&dev_attr_flags.attr,
+	&dev_attr_filter_flags.attr,
+	&dev_attr_measurement.attr,
+	&dev_attr_retry_rate.attr,
+	&dev_attr_status.attr,
+	&dev_attr_temperature.attr,
+	&dev_attr_tx_power.attr,
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	&dev_attr_debug_level.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group iwl3945_attribute_group = {
+	.name = NULL,		/* put in device directory */
+	.attrs = iwl3945_sysfs_entries,
+};
+
+struct ieee80211_ops iwl3945_hw_ops = {
+	.tx = iwl3945_mac_tx,
+	.start = iwl3945_mac_start,
+	.stop = iwl3945_mac_stop,
+	.add_interface = iwl_legacy_mac_add_interface,
+	.remove_interface = iwl_legacy_mac_remove_interface,
+	.change_interface = iwl_legacy_mac_change_interface,
+	.config = iwl_legacy_mac_config,
+	.configure_filter = iwl3945_configure_filter,
+	.set_key = iwl3945_mac_set_key,
+	.conf_tx = iwl_legacy_mac_conf_tx,
+	.reset_tsf = iwl_legacy_mac_reset_tsf,
+	.bss_info_changed = iwl_legacy_mac_bss_info_changed,
+	.hw_scan = iwl_legacy_mac_hw_scan,
+	.sta_add = iwl3945_mac_sta_add,
+	.sta_remove = iwl_legacy_mac_sta_remove,
+	.tx_last_beacon = iwl_legacy_mac_tx_last_beacon,
+};
+
+static int iwl3945_init_drv(struct iwl_priv *priv)
+{
+	int ret;
+	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
+
+	priv->retry_rate = 1;
+	priv->beacon_skb = NULL;
+
+	spin_lock_init(&priv->sta_lock);
+	spin_lock_init(&priv->hcmd_lock);
+
+	INIT_LIST_HEAD(&priv->free_frames);
+
+	mutex_init(&priv->mutex);
+	mutex_init(&priv->sync_cmd_mutex);
+
+	priv->ieee_channels = NULL;
+	priv->ieee_rates = NULL;
+	priv->band = IEEE80211_BAND_2GHZ;
+
+	priv->iw_mode = NL80211_IFTYPE_STATION;
+	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
+
+	/* initialize force reset */
+	priv->force_reset[IWL_RF_RESET].reset_duration =
+		IWL_DELAY_NEXT_FORCE_RF_RESET;
+	priv->force_reset[IWL_FW_RESET].reset_duration =
+		IWL_DELAY_NEXT_FORCE_FW_RELOAD;
+
+
+	priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
+	priv->tx_power_next = IWL_DEFAULT_TX_POWER;
+
+	if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
+		IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
+			 eeprom->version);
+		ret = -EINVAL;
+		goto err;
+	}
+	ret = iwl_legacy_init_channel_map(priv);
+	if (ret) {
+		IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
+		goto err;
+	}
+
+	/* Set up txpower settings in driver for all channels */
+	if (iwl3945_txpower_set_from_eeprom(priv)) {
+		ret = -EIO;
+		goto err_free_channel_map;
+	}
+
+	ret = iwl_legacy_init_geos(priv);
+	if (ret) {
+		IWL_ERR(priv, "initializing geos failed: %d\n", ret);
+		goto err_free_channel_map;
+	}
+	iwl3945_init_hw_rates(priv, priv->ieee_rates);
+
+	return 0;
+
+err_free_channel_map:
+	iwl_legacy_free_channel_map(priv);
+err:
+	return ret;
+}
+
+#define IWL3945_MAX_PROBE_REQUEST	200
+
+static int iwl3945_setup_mac(struct iwl_priv *priv)
+{
+	int ret;
+	struct ieee80211_hw *hw = priv->hw;
+
+	hw->rate_control_algorithm = "iwl-3945-rs";
+	hw->sta_data_size = sizeof(struct iwl3945_sta_priv);
+	hw->vif_data_size = sizeof(struct iwl_vif_priv);
+
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_SPECTRUM_MGMT;
+
+	hw->wiphy->interface_modes =
+		priv->contexts[IWL_RXON_CTX_BSS].interface_modes;
+
+	hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
+			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
+			    WIPHY_FLAG_IBSS_RSN;
+
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IWL3945_MAX_PROBE_REQUEST - 24 - 2;
+
+	/* Default value; 4 EDCA QOS priorities */
+	hw->queues = 4;
+
+	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&priv->bands[IEEE80211_BAND_2GHZ];
+
+	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&priv->bands[IEEE80211_BAND_5GHZ];
+
+	iwl_legacy_leds_init(priv);
+
+	ret = ieee80211_register_hw(priv->hw);
+	if (ret) {
+		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+		return ret;
+	}
+	priv->mac80211_registered = 1;
+
+	return 0;
+}
+
+static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int err = 0, i;
+	struct iwl_priv *priv;
+	struct ieee80211_hw *hw;
+	struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
+	struct iwl3945_eeprom *eeprom;
+	unsigned long flags;
+
+	/***********************
+	 * 1. Allocating HW data
+	 * ********************/
+
+	/* mac80211 allocates memory for this device instance, including
+	 *   space for this driver's private structure */
+	hw = iwl_legacy_alloc_all(cfg);
+	if (hw == NULL) {
+		pr_err("Can not allocate network device\n");
+		err = -ENOMEM;
+		goto out;
+	}
+	priv = hw->priv;
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+
+	priv->cmd_queue = IWL39_CMD_QUEUE_NUM;
+
+	/* 3945 has only one valid context */
+	priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
+
+	for (i = 0; i < NUM_IWL_RXON_CTX; i++)
+		priv->contexts[i].ctxid = i;
+
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
+	priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
+	priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
+	priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
+	priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
+	priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
+	priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
+	priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
+
+	/*
+	 * Disabling hardware scan means that mac80211 will perform scans
+	 * "the hard way", rather than using device's scan.
+	 */
+	if (iwl3945_mod_params.disable_hw_scan) {
+		dev_printk(KERN_DEBUG, &(pdev->dev),
+			"sw scan support is deprecated\n");
+		iwl3945_hw_ops.hw_scan = NULL;
+	}
+
+	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
+	priv->cfg = cfg;
+	priv->pci_dev = pdev;
+	priv->inta_mask = CSR_INI_SET_MASK;
+
+	if (iwl_legacy_alloc_traffic_mem(priv))
+		IWL_ERR(priv, "Not enough memory to generate traffic log\n");
+
+	/***************************
+	 * 2. Initializing PCI bus
+	 * *************************/
+	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+				PCIE_LINK_STATE_CLKPM);
+
+	if (pci_enable_device(pdev)) {
+		err = -ENODEV;
+		goto out_ieee80211_free_hw;
+	}
+
+	pci_set_master(pdev);
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (!err)
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err) {
+		IWL_WARN(priv, "No suitable DMA available.\n");
+		goto out_pci_disable_device;
+	}
+
+	pci_set_drvdata(pdev, priv);
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err)
+		goto out_pci_disable_device;
+
+	/***********************
+	 * 3. Read REV Register
+	 * ********************/
+	priv->hw_base = pci_iomap(pdev, 0, 0);
+	if (!priv->hw_base) {
+		err = -ENODEV;
+		goto out_pci_release_regions;
+	}
+
+	IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
+			(unsigned long long) pci_resource_len(pdev, 0));
+	IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
+
+	/* We disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_write_config_byte(pdev, 0x41, 0x00);
+
+	/* these spin locks will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&priv->reg_lock);
+	spin_lock_init(&priv->lock);
+
+	/*
+	 * stop and reset the on-board processor just in case it is in a
+	 * strange state ... like being left stranded by a primary kernel
+	 * and this is now the kdump kernel trying to start up
+	 */
+	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+	/***********************
+	 * 4. Read EEPROM
+	 * ********************/
+
+	/* Read the EEPROM */
+	err = iwl_legacy_eeprom_init(priv);
+	if (err) {
+		IWL_ERR(priv, "Unable to init EEPROM\n");
+		goto out_iounmap;
+	}
+	/* MAC Address location in EEPROM same for 3945/4965 */
+	eeprom = (struct iwl3945_eeprom *)priv->eeprom;
+	IWL_DEBUG_INFO(priv, "MAC address: %pM\n", eeprom->mac_address);
+	SET_IEEE80211_PERM_ADDR(priv->hw, eeprom->mac_address);
+
+	/***********************
+	 * 5. Setup HW Constants
+	 * ********************/
+	/* Device-specific setup */
+	if (iwl3945_hw_set_hw_params(priv)) {
+		IWL_ERR(priv, "failed to set hw settings\n");
+		goto out_eeprom_free;
+	}
+
+	/***********************
+	 * 6. Setup priv
+	 * ********************/
+
+	err = iwl3945_init_drv(priv);
+	if (err) {
+		IWL_ERR(priv, "initializing driver failed\n");
+		goto out_unset_hw_params;
+	}
+
+	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
+		priv->cfg->name);
+
+	/***********************
+	 * 7. Setup Services
+	 * ********************/
+
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_legacy_disable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	pci_enable_msi(priv->pci_dev);
+
+	err = request_irq(priv->pci_dev->irq, iwl_legacy_isr,
+			  IRQF_SHARED, DRV_NAME, priv);
+	if (err) {
+		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
+		goto out_disable_msi;
+	}
+
+	err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
+	if (err) {
+		IWL_ERR(priv, "failed to create sysfs device attributes\n");
+		goto out_release_irq;
+	}
+
+	iwl_legacy_set_rxon_channel(priv,
+			     &priv->bands[IEEE80211_BAND_2GHZ].channels[5],
+			     &priv->contexts[IWL_RXON_CTX_BSS]);
+	iwl3945_setup_deferred_work(priv);
+	iwl3945_setup_rx_handlers(priv);
+	iwl_legacy_power_initialize(priv);
+
+	/*********************************
+	 * 8. Setup and Register mac80211
+	 * *******************************/
+
+	iwl_legacy_enable_interrupts(priv);
+
+	err = iwl3945_setup_mac(priv);
+	if (err)
+		goto  out_remove_sysfs;
+
+	err = iwl_legacy_dbgfs_register(priv, DRV_NAME);
+	if (err)
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
+	/* Start monitoring the killswitch */
+	queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
+			   2 * HZ);
+
+	return 0;
+
+ out_remove_sysfs:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
+	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
+ out_release_irq:
+	free_irq(priv->pci_dev->irq, priv);
+ out_disable_msi:
+	pci_disable_msi(priv->pci_dev);
+	iwl_legacy_free_geos(priv);
+	iwl_legacy_free_channel_map(priv);
+ out_unset_hw_params:
+	iwl3945_unset_hw_params(priv);
+ out_eeprom_free:
+	iwl_legacy_eeprom_free(priv);
+ out_iounmap:
+	pci_iounmap(pdev, priv->hw_base);
+ out_pci_release_regions:
+	pci_release_regions(pdev);
+ out_pci_disable_device:
+	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
+ out_ieee80211_free_hw:
+	iwl_legacy_free_traffic_mem(priv);
+	ieee80211_free_hw(priv->hw);
+ out:
+	return err;
+}
+
+static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	if (!priv)
+		return;
+
+	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
+
+	iwl_legacy_dbgfs_unregister(priv);
+
+	set_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	iwl_legacy_leds_exit(priv);
+
+	if (priv->mac80211_registered) {
+		ieee80211_unregister_hw(priv->hw);
+		priv->mac80211_registered = 0;
+	} else {
+		iwl3945_down(priv);
+	}
+
+	/*
+	 * Make sure device is reset to low power before unloading driver.
+	 * This may be redundant with iwl_down(), but there are paths to
+	 * run iwl_down() without calling apm_ops.stop(), and there are
+	 * paths to avoid running iwl_down() at all before leaving driver.
+	 * This (inexpensive) call *makes sure* device is reset.
+	 */
+	iwl_legacy_apm_stop(priv);
+
+	/* make sure we flush any pending irq or
+	 * tasklet for the driver
+	 */
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_legacy_disable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl3945_synchronize_irq(priv);
+
+	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
+
+	cancel_delayed_work_sync(&priv->_3945.rfkill_poll);
+
+	iwl3945_dealloc_ucode_pci(priv);
+
+	if (priv->rxq.bd)
+		iwl3945_rx_queue_free(priv, &priv->rxq);
+	iwl3945_hw_txq_ctx_free(priv);
+
+	iwl3945_unset_hw_params(priv);
+
+	/*netif_stop_queue(dev); */
+	flush_workqueue(priv->workqueue);
+
+	/* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
+	 * priv->workqueue... so we can't take down the workqueue
+	 * until now... */
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
+	iwl_legacy_free_traffic_mem(priv);
+
+	free_irq(pdev->irq, priv);
+	pci_disable_msi(pdev);
+
+	pci_iounmap(pdev, priv->hw_base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	iwl_legacy_free_channel_map(priv);
+	iwl_legacy_free_geos(priv);
+	kfree(priv->scan_cmd);
+	if (priv->beacon_skb)
+		dev_kfree_skb(priv->beacon_skb);
+
+	ieee80211_free_hw(priv->hw);
+}
+
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+
+static struct pci_driver iwl3945_driver = {
+	.name = DRV_NAME,
+	.id_table = iwl3945_hw_card_ids,
+	.probe = iwl3945_pci_probe,
+	.remove = __devexit_p(iwl3945_pci_remove),
+	.driver.pm = IWL_LEGACY_PM_OPS,
+};
+
+static int __init iwl3945_init(void)
+{
+
+	int ret;
+	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+	pr_info(DRV_COPYRIGHT "\n");
+
+	ret = iwl3945_rate_control_register();
+	if (ret) {
+		pr_err("Unable to register rate control algorithm: %d\n", ret);
+		return ret;
+	}
+
+	ret = pci_register_driver(&iwl3945_driver);
+	if (ret) {
+		pr_err("Unable to initialize PCI module\n");
+		goto error_register;
+	}
+
+	return ret;
+
+error_register:
+	iwl3945_rate_control_unregister();
+	return ret;
+}
+
+static void __exit iwl3945_exit(void)
+{
+	pci_unregister_driver(&iwl3945_driver);
+	iwl3945_rate_control_unregister();
+}
+
+MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
+
+module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO);
+MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
+module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto,
+		"using software crypto (default 1 [software])");
+module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
+		int, S_IRUGO);
+MODULE_PARM_DESC(disable_hw_scan,
+		"disable hardware scanning (default 0) (deprecated)");
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+module_param_named(fw_restart, iwl3945_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
+
+module_exit(iwl3945_exit);
+module_init(iwl3945_init);